Database Develop

Stuck in bootloader loading screen.

Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.

Before I flashed my first rom, I read wiki.xda-developers.com to make sure I understood what I was doing, and used the search button, instead of risking turning my phone into a paper weight.
Since then, Crackwhore has written a very helpful post at the top of this forum about how to use HSPL and USPL to allow you to flash roms.

yeah i know all that. not my first time flashing a phone but the first time it got stuck loading the bootloader. and specially when i´ve only used the HTC update.

darfor said:
Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.
Click to expand...
Click to collapse
you mean you couldn't get to boot loader page?

So you already have HSPL 1.56 installed (or have SPL1.54 and used USPL)?
If you have HSPL you could try renaming the .nbh file to blacimg.nbh and copying it to the SD card and entering bootloader

Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!

AFW said:
Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!
Click to expand...
Click to collapse
try dnloading the rom again amd try.
the file might be corrupt

Have tried that many times. File is not corrupt. I'm getting really worried this is now a brick...

OK, if you can get phone into bootloader, it is not bricked
What does your SPL say in bootloader? Do you get any errors when trying to flash rom? Are you using USPL or HSPL? If USPL, you have to use it before every flash to new rom or radio. If HSPL, are you using correct version?

Was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
USB
Click to expand...
Click to collapse
When I start blac_uspl.exe (USPL 2.5), a window flashes (Vista64) for a split second and then nothing else happens. The Vista64 system's USBs work with THD and have been used to sync over past few months.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.

Your SPL says 1.54.0000. When you try and run USPL.exe have you remembered to disable your antivirus?
Have you tried usb method instead of card for flashing rom?
I know you have said that youi have used usb for syncing, but when in bootloader does it change from 'serial' to 'usb' when you connect HD to PC?

Fallen Spartan - I want to thank you for taking the time to help me resolve this problem. Very much appreciated!
1. Yes, anti-virus disabled and indeed removed from the PC.
2. Yes, have tried the USB method at least 20 times.
3. Yes, the bootloader changes from Serial to USB. It then goes to the progress indicator screen and hangs on 0%. The progress indicator on the RUU on PC also stays at 0% and eventually times out. I've gone through the Recovery routine at least 20 times, with no luck.
When I try to run SSPL-Manual-TouchHD.exe it says "not a valid Win32 application".

I'm a bit perplexed by this.
You have obviously successfully flashed Duttys V3.9 so drivers are fine, you know how to use USPL, both flashing methods (SD card and usb/pc), disabled anti-virus, phone in bootloader.
Have you tried to reflash 1.56 rom or possibly performing a hard reset before trying to use USPL or HSPL. I doubt this would make a difference though.
Have you tried cRaCKwHoRe's USPL GUI v 2.5 Application?
You don't get any code errors?? I'm struggling to find a solution here.

Yes, this is most vexing. I've flashed innumerable times before and never had an issue. I suspect the SPL is fine, but somehow the actual WM ROM image is corrupted. Will now try to load Std 1.56 ROM image again...

Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa (though I'm a rugby fan).

AFW said:
Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa.
Click to expand...
Click to collapse
No accomodation required, just glad you got it sorted

Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also

can anybody help me at all

Adamsville: perhaps you're stuck in bootloader mode because the WM ROM image flashed on your system has become corrupted or disabled, ie the only thing the system can boot into is the bootloader.
Try flashing a new compatible WM ROM image and see if that works.

AdamsvillE said:
Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also
Click to expand...
Click to collapse
a hardreset followed by a 1.54 base rom will solve all ur probs.
or lower spl to 1.14 cos ur stock rom is a 1.14 base as suggested by th name..
cheers

Kaiser bricked nothing worked yet.

Hi.
today i bricked my kaiser when i tried to install a dutty's rom
been trying to get this fixxed for over 5 hours. nothing worked out.
used kaisdiag.nbh from h ttp://forum.xda-developers.com/showthread.php?t=420683
in both suggested solutions my kaiser wont go further then the Loading page. ( waited atleast 10 mins twice without any success)
used some other RUU installs while in the tricolour screen:
ahmedfikry wm6.5 23549 Tilt UC light rom
KAISER_WM65_OS23547_PP12MB_Sonblack05
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
RUU_Kaiser_HTC_WWE_3.02.405.0_radio_sign_25.70.30.05_1.58.26.20
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_64.08.21_CubeV2_ <== the one wich bricked my phone
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_No_CubeV2_
RUU_Kaiser_TMO_UK_3.31.110.3_radio_sign_25.83.40.02_1.70.18.02_Ship
some other topic sugested to use MTTY.
but that probram says: usb port cannot open.
long story short: im desperate.
can any of u please help me fix my phone ?
its an MDA vario II. model Kais130 P/N 99hcy063-00
thanks in advance.

i'm no expert at recovering bricked phones...
but what i understand is that IF you have a hard SPL (which hard SPL do you have?), then you should be able to recover your device from nearly any situation.
try this...if RUU is not working well, try to flash using the SD card method.
also, try to flash a stock ROM (using RUU as well as using the SD card method). let us know what happens.

Try putting your phone into bootloader, ( press and hold power and camera buttons while doing a soft reset ) once it is in the " tri-color " screen, let us know what it says on the screen.

thanks for your time and the fast response, to both of you.
@#1
i used Pofs hard spl.
and as mentioned above i tried both the RUU way and with my micro SD card.
the SD way only shows me the 'Loading' screen. over and over.
and with the RUU i get several errors. connection errors at 0% and connection errors some later.
some roms just say they wont work on my phone.
and others just reboot my phone.
@#2
i think my phone gets to the bootloader all the time. cause i c no difference when resetting with camera and power button on.
its the tri color screen with the folowing information that shows up:
RUUNBH
Kais130
SPL-1.56.0000
CPLD-8
serial/USB
______________________
the serial shows up when the phone is not connected.. and the USB shows up when its attached to my pc with usb.
Any other suggestions ?
Thanks in advance .

You don't have hard-spl you still have a stock, flash the stock ROM of your carrier from bootloader.
Then follow the noobs guide to flashing.

Thx guys my phone is working like it used to be.
downoaded the original rom from t-mobile again. and again.
now got one wich is working.
thanks for your help.
i was about to throw the brick trough the window.

[Q] help!!!htc touch diamond 2(topaz)!!

hello!i have an htc touch diamond 2 and i used hard-SPL in order to put a new rom to my device.i did it successfully(at least pc said so) and then i installed a rom energy topaz successfully too.but when it was done my device restarted on its own and it cant boot.the only thing that it does is to appear the htc green logo in white screen and then restarting again and again and again!!i kept the volume down button and it booted on the red-green-blue-white screen and it says this:
TOPA100 32Μ
SPL-2.51.oliNex ------>on the red part
MicroP-Topaz (led) V10
TURBO HW/TURBO SW
TPMFG DATA
517,557 190,896
186,212 854,214 --------->this one one green part
847,894 calibrated
and on the white part it says usb when its connected with pc and serial when its not!!what can i do now?i tried also some other roms for topaz which were succefully loaded too but the same thing happens again and again.i would apriaciate some help.
thanx.

billyprepo said:
hello!i have an htc touch diamond 2 and i used hard-SPL in order to put a new rom to my device.i did it successfully(at least pc said so) and then i installed a rom energy topaz successfully too.but when it was done my device restarted on its own and it cant boot.the only thing that it does is to appear the htc green logo in white screen and then restarting again and again and again!!i kept the volume down button and it booted on the red-green-blue-white screen and it says this:
TOPA100 32Μ
SPL-2.51.oliNex ------>on the red part
MicroP-Topaz (led) V10
TURBO HW/TURBO SW
TPMFG DATA
517,557 190,896
186,212 854,214 --------->this one one green part
847,894 calibrated
and on the white part it says usb when its connected with pc and serial when its not!!what can i do now?i tried also some other roms for topaz which were succefully loaded too but the same thing happens again and again.i would apriaciate some help.
thanx.
Click to expand...
Click to collapse
Sorry i didn't get back to you sooner and you added the perfect amount of info
ok where to start - firstly have you tried a hard reset after flashing the ROM this isn't always needed but may possibly free something up to make the energy ROM work. You could also try flashing back to a stock ROM from the HTC website and then re-flash the one you want after everything is ok on the stock ROM.
when you say successfully loaded do you mean the screen shows 100% (phone not computer) or does it say complete as it can say 100% on the screen for a little while and not work ? I don't do mine by the PC i use a memory card to flash it and mine always comes up complete when done and then press a key to restart the phone.
failing all of this head back into the hard_spl thread run the spl_relocker in the first post and once relocked flash with hard_spl 1.83 no idea if the newer version is less or more buggy but i use 1.83 and it's smooth sailing.
You could also try flashing from a memory card instead if you have one to hand

thanx warlordxxx!its done!

billyprepo said:
thanx warlordxxx!its done!
Click to expand...
Click to collapse
No problemo

Flashing Custom Rom - How to do?

Hi, i am quite new and i dont know how to flash custom roms. i also have some questions:
1) Do i loose all data and apps when i flash a custom rom?
2) I read, that i need to install "DFT HSPL RSPL WP7F3" first, but i also read on this page ( http://forum.xda-developers.com/showthread.php?t=1195647 ) that i shoud not install it:
"WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
All WP7F devices affected: MOZART, GOLD, SCHUBERT, MONDRIAN, SPARK!
It will damage your device. Not a joke."
So what to do now?
3) The custom rom of my choise would be "Nextgen+ ROM 3.1". After installing it, will i be able to receive the latest MS WP7 updates the normal way?
4) is there a not "enhanced" version of the latest Tango update? I would prefer that kind of version more then a custom one with functions/changes/bugs i do not like! If yes, where to find?
5) Is there any good how-to-do page to explain the flashing of custom roms?
THANKS

stephanwiw said:
Hi, i am quite new and i dont know how to flash custom roms. i also have some questions:
1) Do i loose all data and apps when i flash a custom rom? YES
2) I read, that i need to install "DFT HSPL RSPL WP7F3" first, but i also read on this page ( http://forum.xda-developers.com/showthread.php?t=1195647 ) that i shoud not install it:
"WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
All WP7F devices affected: MOZART, GOLD, SCHUBERT, MONDRIAN, SPARK!
It will damage your device. Not a joke."
So what to do now? DOWNGRADE FIRST
3) The custom rom of my choise would be "Nextgen+ ROM 3.1". After installing it, will i be able to receive the latest MS WP7 updates the normal way? YES but why?
4) is there a not "enhanced" version of the latest Tango update? I would prefer that kind of version more then a custom one with functions/changes/bugs i do not like! If yes, where to find?
5) Is there any good how-to-do page to explain the flashing of custom roms? YES
sh4d0w86 has the best instructions here ! and thank him to !
read all that sh4d0w86 has
THANKS
Click to expand...
Click to collapse
cheers and have a gr8 day
thanks button is next to the qoute button

****, i tried this how-to-do and FAILED!
I came to step 6
"6.a. for Europe devices, see ansar.ath.gr's thread, here."
cause i have a europe device and latest Mango Version.
The installing bar went up to 100% but after the phone restartet the program displayed:
Eroor 270: Update Error
The image file is corrupted. Please check you Update Utility
and the phone restartet in the bootloader version.
HELP, CAUSE NOTHING IS WORKING ANYMORE!
After starting my phone i read the following on my screen:
PD29100 MFG SS-BC (4K)
SPL-1.57.2250.0(113571)
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
SD SANDISK 7580MB Class0
Partition Info-v211v413

ok
need more info
can phone go into bootloader?
what rspl/hspl did you install?
is usb/ seriel displayed?
cheers and have a gr8 day
thanks button is next to the qoute button

jhonny said:
ok
need more info
can phone go into bootloader?
what rspl/hspl did you install?
is usb/ seriel displayed?
cheers and have a gr8 day
thanks button is next to the qoute button
Click to expand...
Click to collapse
Thanks, as i wrote, the bootloader shows the info i added in my last post.
i tried to open the tool to install rspl/hspl, but that programm doesnt load. i use windows 7, but everytime i open the program there is an error. i tried the program on a win XP pc and there it is working, but also after installing ZUNE i do not have a usb driver... so where do i get a usb driver?
okay so far: i can boot an old version of the OS! right now i am running an update and hope, that the SPL-Version is working for the RSPL/HSPL cracking!

The biggest problem right now is the version of my bootloader, which is SPL-1.57
This bootloader is not supporter by the RSPL/HSPL. How can i install a new bootloader, which is compatible.
When i choose a bootloader close to the 1.57 version, e.g. 1.56 or 1.60 the installation on the pc finishs, but the device is not booting and therefore the SPL is still standing there...
Could it be, that the installation needs some time? more then 5 minutes on the device, cause it looks like that my phone is freezed after it (when i remove the usb-cable, the screen still shows the usb connection...)
What is a radio?
http://forum.xda-developers.com/wiki/HTC_HD7/Radios
What version should i install? Is the radio = bootloader?

More and more problems.
the OS i now have installed has just english US keyboard... the update to Mango is not working too!
**** i just want to get back to the old version...
i am from germany, had a 5.X bootloader and latest mango update!
Please, can anyone help me to get back to that state?!?

stephanwiw said:
The biggest problem right now is the version of my bootloader, which is SPL-1.57
This bootloader is not supporter by the RSPL/HSPL. How can i install a new bootloader, which is compatible.
When i choose a bootloader close to the 1.57 version, e.g. 1.56 or 1.60 the installation on the pc finishs, but the device is not booting and therefore the SPL is still standing there...
Could it be, that the installation needs some time? more then 5 minutes on the device, cause it looks like that my phone is freezed after it (when i remove the usb-cable, the screen still shows the usb connection...)
What is a radio?
http://forum.xda-developers.com/wiki/HTC_HD7/Radios
What version should i install? Is the radio = bootloader?
Click to expand...
Click to collapse
hi stephanwiw
by what you have writen , you have downgraded your phone hspl bootloader to less then 3.xx . thats good
now flash/install cotulla custom hspl number 3 http://htcfanboys.com/download/cotulla/?action=view&file=2942
once you have done that, check bootloader screen again , should say cotulla
download custom rom, enter bootloader again and flash
radio comes with rom, so before you start to play with radio install, try phone first , see how it works then.....
cheers and have a gr8 day
thanks button is next to the qoute button
---------- Post added at 08:17 PM ---------- Previous post was at 08:10 PM ----------
stephanwiw said:
More and more problems.
the OS i now have installed has just english US keyboard... the update to Mango is not working too!
**** i just want to get back to the old version...
i am from germany, had a 5.X bootloader and latest mango update!
Please, can anyone help me to get back to that state?!?
Click to expand...
Click to collapse
once you have cotulla custom hspl will be all good.
you can have custom rom, and they are gr8, all will be up to date(mango..tango) and better
cheers and have a gr8 day
thanks button is next to the qoute button

Thanks for the help, but i choosed another way.
Finally i managed to install a clean "normal" rom from Mango. Installed all old apps again and i am happy to have a working phone again The complicated process of hacking my device is over!
But one last question is interesting for me: Is there any Tango Rom out for the HTC HD7 without any custom changes? Can it be installed without an hacked phone? Would i lost all my data again, or would it be a real update?
Thanks!

stephanwiw said:
Thanks for the help, but i choosed another way.
Finally i managed to install a clean "normal" rom from Mango. Installed all old apps again and i am happy to have a working phone again The complicated process of hacking my device is over!
But one last question is interesting for me: Is there any Tango Rom out for the HTC HD7 without any custom changes? Can it be installed without an hacked phone? Would i lost all my data again, or would it be a real update?
Thanks!
Click to expand...
Click to collapse
sorry to hear that you couldnt install custom rom!
if you have installed a stock rom, and plug phone to pc, run zune and once an updade is offered, you can update that way, and no you shouldnt loose any data that way.
cheers and have a gr8 day
thanks button is next to qoute button

similar problem!
hey guys! i'm new to the hd7 scene but i've done a lot of flashing previously. i've got a similar problem as stephanwiw. my SPL is the same (1.57.2250.0) and when i try to RSPL, the device just stays on the tricolour screen and doesn't restart. if i pull out the battery and go back into tricolour screen, it just says i still have OSPL of 1.57. i have windows 7 (64 bit) and i have WMDC installed.
does anyone know what the issue is here?
all help is appreciated
EDIT: just updating for anyone else who has a similar problem because i found a very simple solution
i was only choosing the closest SPL to mine which was 1.56. but then i chose one which was larger than the SPL that i had and that was 1.60. and that's all i needed. it actually makes sense in retrospect as to downgrade any SPL you need to flash an official ROM, so i guess this was a stupid mistake.

hi gagannitrate
nice to hear you worked it out and got it working!
it all sounds hard but all you need is to go slow and follow every step sh4d0w86 has listed.
cheers and have a gr8 day
thanks button is next to qoute button

jhonny said:
hi gagannitrate
nice to hear you worked it out and got it working!
it all sounds hard but all you need is to go slow and follow every step sh4d0w86 has listed.
cheers and have a gr8 day
thanks button is next to qoute button
Click to expand...
Click to collapse
Hi guys
I have a htc hd7 and I tried to downgrade it to pre mango by using ROM by ansar. when it reached a 100% there was an error message saying 270 image is corrupted.
After several attempts my started working with this rom and the tricolor screen now says:
PD29100 MFG SS-BC (4K)
SPL-1.57.2250.0(113571)
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
When I try to install RSPL my phone is recognised but it doesn't restart at the end of the process and RSPL isn't istalled. I tried all the versions 1.56, 1.60, 1.61, 1.64, 1.68, 1.69 but still I can't install RSPL
Can please someone help?
Thanks

hi jtsek
RSPL is not permenant, and only used once, so after every flash you have to flash again
HSPL will stay on your phone always,
but remenber if phone needs repair/warranty then before you send it, you have to flash stock rom again to get rid of HSPL because void warranty
cheers and have a gr8 day
thanks button is next to qoute button

Bootloader issues and half bricked

Hi guys,
I bought a HD7 a while ago, and it had been nice to use, right up to when it decided to randomly restart, and freeze. Saw there was a 7.10 update, and went for it. Half way through the update, my phone restarted, out of the blue, as the updates where installing... Typical, eh? so, before it did restart it had took a back up, Zune saw the backup and I attempted to restore. A few hours later, it had failed and the device doesn't boot past some stupid PC connection screen. Its a black screen with a mobile device, connected to a computer....
So... After a while of research, I decided to downgrade, and then flash a custom rom.
problem being, I wasn't able to get the bootloader info or OS version before the phone decided to brick its self. When I was an android user, I had bricked my phone many times, but this is so much harder.
Heres the info from what I got from the bootloader screen,
PD29*** SS-BC (4K)
SPL-5.11.2250.0(134400) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
Can any one help me with this?
I am on o2 UK.
I have been attempting to use task 29+00. Apon using 00, I use radio 1.16 and 1.69 and both somehow restart the phone from the install percentage bar. Also been pointed to the this website, an archive of xda: http://forum.xda-developers.com/wiki/HTC_HD7/Radios
Can some one give me a helping hand and point me in the right direction?
Thanks!

davalav said:
Hi guys,
I bought a HD7 a while ago, and it had been nice to use, right up to when it decided to randomly restart, and freeze. Saw there was a 7.10 update, and went for it. Half way through the update, my phone restarted, out of the blue, as the updates where installing... Typical, eh? so, before it did restart it had took a back up, Zune saw the backup and I attempted to restore. A few hours later, it had failed and the device doesn't boot past some stupid PC connection screen. Its a black screen with a mobile device, connected to a computer....
So... After a while of research, I decided to downgrade, and then flash a custom rom.
problem being, I wasn't able to get the bootloader info or OS version before the phone decided to brick its self. When I was an android user, I had bricked my phone many times, but this is so much harder.
Heres the info from what I got from the bootloader screen,
PD29*** SS-BC (4K)
SPL-5.11.2250.0(134400) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
Can any one help me with this?
I am on o2 UK.
I have been attempting to use task 29+00. Apon using 00, I use radio 1.16 and 1.69 and both somehow restart the phone from the install percentage bar. Also been pointed to the this website, an archive of xda: http://forum.xda-developers.com/wiki/HTC_HD7/Radios
Can some one give me a helping hand and point me in the right direction?
Thanks!
Click to expand...
Click to collapse
The goldcard/ Ycable method is your best bet and truthfully your only hope without having to use a Jtag or Riff box. The goldcard method can repair a damaged bootloader and is used while in USB host mode... The black screen indicating to connect to a P/C. This is the basic idea of it...use the goldcard method and flash a stock/shipped rom for your devices specific carrier. This should repair the bootloader and should also downgrade your spl and OS version as well, depending on what rom version you flash. At this point you can update through Zune to the current OS version. Then if you wanted to, you could use your goldcard to downgrade the spl and install rspl/hspl and flash a custom rom! Here's Shadows tutorial on how to downgrade spl, this will give you a background on how the process work and links to all the shipped/stock roms:
http://forum.xda-developers.com/showthread.php?t=1295068
This gives a good view and idea on how to make the cable:
http://forum.xda-developers.com/showthread.php?t=1676794
If you need anymore help just let us know!

Hi, i have an half bricked HD7
Hi, i have an half bricked HD7 :when i used goldcard it stayd in enter usb mod ...would u help me?

asadasad11 said:
Hi, i have an half bricked HD7 :when i used goldcard it stayd in enter usb mod ...would u help me?
Click to expand...
Click to collapse
Hi,
When it gets stuck on "Enter USB host mode" it means that it can't read the file from the SD card.
Try this -
1. Try switching around the connections of the Y cable.
2. Try a different SD card reader. This is usually the problem.
3. Make sure you renamed the .nbh file to SCHUIMG.nbh (has to be capitalized)
4. Sometimes the camera button will get stuck in and prevent the device from reading the file.
Also when the device gets stuck on "Enter USB host mode" you have to reset the device to get an active connection again... Disconnect the Y cable from the device, pull the battery and reinstall, then re-enter USB host mode and try the flash process again.
Try those and let me know if you have any success!

hi
do u know anyone with this problem, how i can contact with him/her?