[Q] Help adding ClockworkMod on my Galaxy Tab - Galaxy Tab Q&A, Help & Troubleshooting

Hi All,
Before I start I want to say this is probably a very noob question, and I've tried searching the forums with little success (I don't fully undertand a lot of the information). Now, my question/issue.
I've rooted my device using SuperOneClick (http://forum.xda-developers.com/showthread.php?t=812367) and had no issues. Using ROM Manager I can't seem to get ClockworkMod installed. I select the "flash clockworkmod recovery" option then select "galaxy tab att" (I'm in Canada with Rogers but I assume it will work as there both GSM). It pops up that it successfully downloaded but then never installs. Is there a better way to do this? Any help would be appreciated.

You obviously haven't even bothered to check or search the development section. If you had you would already know how to do it.

TheATHEiST said:
You obviously haven't even bothered to check or search the development section. If you had you would already know how to do it.
Click to expand...
Click to collapse
Thanks for the friendly response. I actually did search the developer forms and didn't understand anything that I found. Which is why I asked here in the general form, I assumed it would be a way to get a better answer more suited for a less experienced user like myself.

obihann said:
Hi All,
Before I start I want to say this is probably a very noob question, and I've tried searching the forums with little success (I don't fully undertand a lot of the information). Now, my question/issue.
I've rooted my device using SuperOneClick (http://forum.xda-developers.com/showthread.php?t=812367) and had no issues. Using ROM Manager I can't seem to get ClockworkMod installed. I select the "flash clockworkmod recovery" option then select "galaxy tab att" (I'm in Canada with Rogers but I assume it will work as there both GSM). It pops up that it successfully downloaded but then never installs. Is there a better way to do this? Any help would be appreciated.
Click to expand...
Click to collapse
OH AND ALSO, you would know to post in the Q&A section NOT IN THE GENERAL section.

Just flash the overcome 1.6 kernel (and the rom together) see dev section.
Or try stock Gingerbread rom from chainfire and flash his jq1 kernel after that

speldenaar said:
Just flash the overcome 1.6 kernel (and the rom together) see dev section.
Or try stock Gingerbread rom from chainfire and flash his jq1 kernel after that
Click to expand...
Click to collapse
Considering I'm having a hard time figuring out how to make clockworkmod to work, and the articles in the dev section don't make a lot of sense to me I'm doubting that will make anything easier. I was told this was "the forum" to go to for help with Anrdoid work, I guess I should have been told that is only true if you already know how to do everything. Is there a better form for beginners?

Everybody once was a beginner. If you read the overcome manual, you'll know everything for flashing your tab. If you don't understand what the manual is about, then perhaps you shouldn't even consider flashing it.
Why do you want clockworkmod so badly?
The clockworkmod is intergrated in the kernels i just mentioned.

speldenaar said:
Everybody once was a beginner. If you read the overcome manual, you'll know everything for flashing your tab. If you don't understand what the manual is about, then perhaps you shouldn't even consider flashing it.
Why do you want clockworkmod so badly?
The clockworkmod is intergrated in the kernels i just mentioned.
Click to expand...
Click to collapse
I will track down and read that manual, thanks. Regarding why I want cwm it is (as I understand it) the easiest way to install or change your existing rom. My end product is I want Gingerbread on this device, and I thought this would be the best way to install that rom.

obihann said:
Thanks for the friendly response. I actually did search the developer forms and didn't understand anything that I found. Which is why I asked here in the general form, I assumed it would be a way to get a better answer more suited for a less experienced user like myself.
Click to expand...
Click to collapse
Yes but you are expected to first "read" and then "learn". If you cant follow guides as simple as the ones here then you really shouldn't be attempting to flash anything to your device yet. At least not until you have read various topics.
obihann said:
I will track down and read that manual, thanks. Regarding why I want cwm it is (as I understand it) the easiest way to install or change your existing rom. My end product is I want Gingerbread on this device, and I thought this would be the best way to install that rom.
Click to expand...
Click to collapse
Then why didnt you just say that in first place??
Go here and download and read the attached guide.

Related

FOR NEW CAPTIVATE USERS - READ HERE FIRST - FAQs | HELPFUL LINKS

Strange we have many FAQ's WIKI's, Great topics on <x> subject - but not one place for the suffering new user to go to. After even myself duplicating topics that have been posted multiple times it is my hope to create this topic to help guide the newly wayward Captivate user to the correct topic and keep the repeated topics down a bit.
I AM IN NO WAY RESPONSIBLE IF SOMETHING HAPPENS TO YOUR DEVICE - YOU THE OWNER OF YOUR CAPTIVATE TAKE 100% RESPONSIBILITY.
This is going to be a long long post - so make sure you use your CTRL-F in your Browser
Special Credits go to the following for putting together the information. I'm just the one gathering it up. So if something you read here helps - make sure to DONATE to them. Also if I have forgot to list you and you wish to be credited? PM me and I'll be happy to add you.
Mikey1022
CLShortFuse
Design Gears
bobbylx
nbs11
BEFORE EVEN READING THIS POST IT WOULD BE WISE TO READ THE WIKI FIRST!
Also some tips before Posting your Question!
Use the SEARCH FEATURE on the Forum and keep your search simple. (ex. GPS, Bricked, Shutdown etc..) Odds are your issue has been posted and answered a few times.
Follow the Rules: Failure to do so could get you banned or worse ridiculed!
Be Courteous and Patient! - If your posted is filled with expletives and I hate this phone, and you come off as being overall rude? Don't expect an answer and expect your post to get removed and you possibly banned.
1) What USB Drivers should I get for my computer to recognize my Captivate? These are the drivers I have used on both a Windows XP 32-bit and Windows 7 64-bit machines - so I know they work.
For Windows 64bit Click here.
For Windows 32-bit Click here.
2) How do I Root my Captivate?
By far the easiest method that I've been able to use is CLShortFuse's One-Click Root and Allow Non-Market Apps. It is a VERY SIMPLE application to use.: Click HERE to go to the post to read about it and download the application.
There is a new tool out there that is a "do-it-all-in-one" called AIO - I would check out the post here and check out the youtube video. This tool appears to do it all.
And users have asked what do I lose if I root my phone. The short answer is nothing! You will not lose any settings, pictures, media, application data etc. But you do gain a lot! I would suggest reading about rooting your device here to learn more about the benefits to rooting your phone.
3) Oh crap I have "bricked" my device!
Um no you didn't. Unless you are unable to get the phone to power on, or it will not be recognized by your computer it is not bricked. "Most" (as in 99.99999%) of the time you can get the phone back into download mode and then ODIN 1-Click back to stock. I would highly recommend going to the links posted before reading the methods I have below them.
Go to DesignGears Odin3 One-Click back to Stock thread and do what it says there.
You should also go to bobbylx's READ ME BEFORE FLASHING!!!! Thread as well by clicking here.
If your phone is still able to get to CWM You can download the stock OTA JH7 from this thread here! I would still recommend the Odin 1-Click method as it will definitely wipe all the gremlins from your phone.
You can watch this tutorial on youtube here if you wish. Credit to BlinkPhaseVideos for the tutorial.
If for some strange reason you absolutely cannot get the phone into download mode you can try one of two things:
The first method - It will take a few tries to get the timing just right so be patient:
Unplug your Device
Pull out the SIM, External SD Card, and Battery
Plug in the mini-USB Cable back into your phone.
While holding down BOTH Up/Down Volume Buttons re-insert the battery.
If you get the "grey battery charging" screen. Then you will need to try and re-attempt it as it didn't work. You should get the download screen and be ready to go back to stock.
Build a Jig to force the phone to go into download mode by reading this thread here.
Mind you this is not for the feint at heart and AT&T warranty centers might be a better option then completely frying your phone.
4) My Phone is Randomly Rebooting or Shutting down after I do <insert whatever action it was doing when it did it here.>
I was informed of two separate posts here and here and now here.
If you have a build 1008 phone and the IMEI # matches what is in this thread here then you might get a replacement device.
Feel free to try what they are posting on there and who knows? You might get lucky. But the overall consensus from what I've read is that if your phone is shutting down and it's not related to some errant application, a custom ROM, or you dipped it in water then it is hardware related and you will want to do a warranty replacement. (No warranty - OUCH! That $4.99 a mo seems pretty trivial now eh?)
5) My GPS is not working because of <insert your random thought/idea here>?
There are two awesome posts on the developer forums on thought, ideas, potential fixes that will at least help if not completely fix your GPS. Keep in mind a lot of this is speculation, personal user experiences, and some folks just madly mashing buttons and getting lucky and having no clue as to how they fixed it.
If your not having GPS issues GREAT! You don't need this then!
My personal favorite thread as it has a lot of information about how GPS works is the [GPS/AGPS] REAL solution analysis thread (Jupiter Tweaks) thread. ***Note: This is most likely only for Froyo 2.2 ROM's.
Another one that has a lot of information and might possibly work for your is:
GPS Flawless/I am requesting XDA Community and Developers to please read!!
6) So.. You think your ready to Install that Awesome <insert Name of ROM here> ROM that will CHANGE YOUR LIFE?
Uh-uh... not until you have read here first. This is that sticky topic that says "Read BEFORE flashing!!". This is probably THE MOST IMPORTANT reading you can do before you start flashing as it shows you how to backup and restore your device.
Then you need to read up on nbs11's guide on his [GUIDE] How to Install a Custom ROM by going here. This guide is VERY easy to read and can apply to most of the custom ROMs that utilize a *.zip to install. ***edit - now includes a video(s) on youtube on how to install that custom ROM.
And failing to follow the developer/cooker's instructions to the "T" could cause catastrophic issues with your phone and yes... possibly bricking your device. Make sure when you go to the ROM you wish to install that you read their install instructions as it could slightly differ from other ROMs out there.
7) So your Battery is Going Down to 0% faster than your USB can Charge Your Phone?
This - by far is probably the best thread I have read about the subject. Although some of it might be speculation - it does seem to be pretty solid work. I would suggest reading this post:How to isolate and fix battery drain (and maybe lag, too) and then see if your battery performance improves.
I hope this guide helps you out. I wish I had known this information before I started flashing ROMs.
Important Links with Additional Information about your Captivate
I have found all of these quite helpful. If you think your post should be added please PM me!
Wiki's and How-TO Basics!
The XDA Samsung Captivate Wiki
XDA and Android Terms and Acronyms Thanks to jmtheiss for creating this. Basic guide to XDA and your Captivate
AIO Captivate Toolbox: This is the all in one tool that allows you to do everything from install drivers, root your phone, and install custom ROM's. If your new this might be the tool for you to use.
Samsung HOW-TO Wiki (3rd Party Link)
The Main XDA Wiki: Lists all the phones that XDA has in their forums. Also has additional information there.
ADB for Dummies! - ADB is probably one of my best tools for tweaking my phone (and restoring stuff I break). If your going to be changing your phone around at all - READ THIS THREAD
Theming Your Phone
Captivate Theme Sticky: Go here to see all of the different themes/tweaks/mods for your Captivate phone.
MetaMorph Home Page on XDA - This is a 3rd party application that will modify the look of your phone without you having to modify any type of *.apk files yourself.
Circle Battery Mods - How to change your default Battery Icon on your status bar.
Transparent Widgets - Just what it says. But please be careful and understand what you are doing before attempting these mods.
Common Sense Before Posting Your Question - PLEASE PLEASE PLEASE READ
Before you post a question on XDA - Please make sure you have utilized the SEARCH Feature - as your issue has probably been answered at least once.
If your going to post a question, make sure it makes sense! i.e. a bad example is ZOMFGBBQSAUCE WTF DO I DO!!!1111!!!!111!!!!!! vs. Phone is Soft Bricked After Attempting to Odin 1 Click. Which one do you think people are going to know how to answer by looking at the topic? Just saying..
In the body of your text it will be very helpful if you do the following:
State clearly the issue - bricked my phone etc.
What ROM are you currently using?
What is the EXACT ERROR of the issue you are reporting?
Is your phone rooted?
Did you have USB Debugging turned on?
If you fail to put pertinent information such as the above - there is no way for anyone to answer your question.
And.. this shouldn't need to be said but I'm adding it anyways...
Be patient. Be polite. Just because you cannot understand something does not mean u can show your frustration at folks here.
Of course this does not encompass all questions - mainly this is useful for when something goes wrong with your phone.
Good resource to put everything together.
w00t Sitckied! Thanks!
JF6 to JF7 Kies Mini Update. Is it necessarily?
Question guys. After using Odin to obtain JF6, do I need to use Kies mini to get to JF7 to be able to use another ROM or I can just master clear everything and from JF6 install a new ROM? Asking because I bricked my phone trying to do OTA to JF7. Got a replacement phone. The boot loader is shot probably so its safe to say my Captivate is bricked. It won't power on at all. I think upgrading to JF7 is pointless but need your expert advice. Thanks.
I have never upgraded from jf6 to jf7 before I flashed another rom, never had any issues. Think it would be an unnecessary step if you are planning to flash over out anyway.
Sent from my SAMSUNG-SGH-I897 using XDA App
Mr.Pirate said:
Question guys. After using Odin to obtain JF6, do I need to use Kies mini to get to JF7 to be able to use another ROM or I can just master clear everything and from JF6 install a new ROM? Asking because I bricked my phone trying to do OTA to JF7. Got a replacement phone. The boot loader is shot probably so its safe to say my Captivate is bricked. It won't power on at all. I think upgrading to JF7 is pointless but need your expert advice. Thanks.
Click to expand...
Click to collapse
After you use ODIN back to JF6 - you can then upgrade back up to any ROM the Dev Forums have available.
The only caveat to this - is READ THEIR INSTRUCTIONS! Some are highly experimental and require you to install them different from the standard CWM install method. (i.e. Cyanogen and the Gingerbread port going around).
i wish this thread was around when i first started out a while back. good job on this one guys.
Can someone post something that shows how to install a theme? I have flashed a custom rom and see a theme I wanna install on it. (Already downloaded the .zip file for it, not sure what to do next)
Thanks.
nice stuff
I find that installing PDAnet as my drivers for my Captivate works well for rooting.
Nice thread. I wish I had seen this before I started flashing.
I think the OP needs to be updated with the line "Be patient. Be polite. Just because u cannot understand something does not mean u can show ur frustration at folks here."
A couple of questions. I've rooted my phone installed a custom rom (serendipity 5.5) and installed that steam. What does jpy and all those others mean? and where would I find out what mine is?
Deadclown said:
A couple of questions. I've rooted my phone installed a custom rom (serendipity 5.5) and installed that steam. What does jpy and all those others mean? and where would I find out what mine is?
Click to expand...
Click to collapse
I think all of that is listed in the WIKI with definitions.
When you see JPY - it is the last 3 letters of the Baseband Version typically - but could be the Modem or Kernel being utilized in the ROM your running. You can see what baseband you are currently running by going under Settings -> About Phone and you will see under Baseband Settings something like: "I9000UGJK4"
But... you would be better off going to the Dev's forum and looking at their release notes. 99% of the time tell you what build the kernel is based off of and the modem they are using.
LOL and yes being patient and courteous is kind of a given. If you guys have any updates, ideas, etc.... to add to the post please let me know.
diablo009 said:
I think the OP needs to be updated with the line "Be patient. Be polite. Just because u cannot understand something does not mean u can show ur frustration at folks here."
Click to expand...
Click to collapse
lol Added it!
Thanks This is helpful
thanks for posting this.
How do you upgrade a ROM?
I just flashed Super Nova 2.0.2 last night. It was updated to 2.0.6 since I flashed. How do I update? Do I have flash back to factory?

Samsung Captivate Noob Help!

I updated to froyo 2.2 (leaked version) on my samsung captivate, and I was wondering if there was a possible way to downgrade back to 2.1.
*The only reason im not liking froyo 2.2 at the moment i cant seem to learn our find out how to root it...
Wanted to root to rom a custom rom?
"noobie question"--> if i was to downgrade to 2.2 back to stock 2.1 and root it to have super user, i could then be able to install a custom rom? OR what would other people suggest doing?
Could someone point me in the right way with a link or two maybe, or some suggestions?
bummmpppp! this is all so new to me!
Here's a link to the SuperOneClick to root and enable non-market apps.
And here's a thread for new captivate users.
You might have an easier time finding answers in the Captivate forum.
DiGi760 said:
Here's a link to the SuperOneClick to root and enable non-market apps.
And here's a thread for new captivate users.
You might have an easier time finding answers in the Captivate forum.
Click to expand...
Click to collapse
Thanks so much for these thinks, I can use this SuperOneClick user on my Captivate with froyo 2.2 correct?
I like the froyo 2.2 just couldnt figure out how to get superuser, im trying to install a custom rom on it, never done it before just wanted to try one out and see! New to all this so probably have more questions haha !
Also another noobie question(s).
What does "flashing" mean?
lol
You have to be rooted to have superuser privileges.
Flashing a phone rom is like installing a new OS on a PC. Be careful on doing so and watch some videos and read up on it if you get brave to try flashing custom roms onto your device. Usually ppl use a windows app called Odin to do so. Make sure phone always charged 100% before flashing any new rom also. It could mess up battery stats otherwise and could risk brick if its almost dead then dies LOL. Assuming that's the context of flashing you meant.
Sent from my SGH-T959 using XDA App
try bookmark this page 1st if anything wrong u can recover to original rom.
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Go to this link
http://forum.xda-developers.com/showthread.php?t=884364
It has everything you need to know about installing a custom ROM. Started like you all, found this post and now I have flashed like a 100 times Enjoy!
Mac4Wii said:
Also another noobie question(s).
What does "flashing" mean?
lol
Click to expand...
Click to collapse
Flashing in simple terms means to install a new OS version/Updates/Themes etc on the phone. The most common method found here in XDA is to use something called as Clockwork Recovery Mod.
Seriously, go to this link http://forum.xda-developers.com/showthread.php?t=884364 you will know what you need to do to flash a custom ROM. And may I suggest Firefly 2.1 found here http://forum.xda-developers.com/showthread.php?t=914284 as your first ROM. It is a good ROM. You will enjoy it. There are some other ROMs, if you ask which is the best, clearly there is none, it is purely on preference. Once you have flashed one ROM, and then a few, you will know which one you like.
1. installing a custom rom does not require a rooted phone, you can copy the update.zip to your sdcard and get into recovery, select the custom rom zip file and flash from there.
2. have you flashed a bios on a computer? flash a phone's rom is very similar to that.

Step by step required for installing rom on Rogers Captivate

Hey all,
I apologize if this has been asked before, but the Rogers threads I have looked at haven't really had the same issue I seem to be having, and it is hard to sift through 800 pages of a ROM thread to try to find the same problem, so once again I apologize
I have a Rogers Captivate, running a factory 2.2 Froyo, I was looking at Rom's that would be compatible, since there seems to be small issues between Rogers and AT&T programs, and I don't want any headaches.
So I was looking at Firefly has an option, I think I am following the steps correctly, but when I am in the recovery mode on the phone, attempting to hit the reinstall option only results in the phone saying "cannot verify signature, aborting" to that nature.
I have tried multiple times, can't seem to figure it out.
Notes:
-The phone is on 2.2 Froyo
-Yes it is rooted, with superuser available in the menu
-I have backed up with Titanium, all that jazz, cannot seem to install new ROM in recovery mode, I don't see the "green" text people are talking about, ROM manager is installed and I have flashed the latest recovery for Samsung Galaxy S Captivate.
Would greatly appreciate a step by step for someone with a Rogers 2.2 Captivate
THANKS!
beerbaron105 said:
Hey all,
I apologize if this has been asked before, but the Rogers threads I have looked at haven't really had the same issue I seem to be having, and it is hard to sift through 800 pages of a ROM thread to try to find the same problem, so once again I apologize
I have a Rogers Captivate, running a factory 2.2 Froyo, I was looking at Rom's that would be compatible, since there seems to be small issues between Rogers and AT&T programs, and I don't want any headaches.
So I was looking at Firefly has an option, I think I am following the steps correctly, but when I am in the recovery mode on the phone, attempting to hit the reinstall option only results in the phone saying "cannot verify signature, aborting" to that nature.
I have tried multiple times, can't seem to figure it out.
Notes:
-The phone is on 2.2 Froyo
-Yes it is rooted, with superuser available in the menu
-I have backed up with Titanium, all that jazz, cannot seem to install new ROM in recovery mode, I don't see the "green" text people are talking about, ROM manager is installed and I have flashed the latest recovery for Samsung Galaxy S Captivate.
Would greatly appreciate a step by step for someone with a Rogers 2.2 Captivate
THANKS!
Click to expand...
Click to collapse
You will need 3e recovery fix. search the forum, it's in there. once you get the file - PM me for better explanations as the one posted aren't very clear.
BWolf56 said:
You will need 3e recovery fix. search the forum, it's in there. once you get the file - PM me for better explanations as the one posted aren't very clear.
Click to expand...
Click to collapse
Successful with the 3e fix, you have PM
BWolf56 said:
You will need 3e recovery fix. search the forum, it's in there. once you get the file - PM me for better explanations as the one posted aren't very clear.
Click to expand...
Click to collapse
Omg it continues!
studacris said:
Omg it continues!
Click to expand...
Click to collapse
Lol took care of this one studa
Sent from my SAMSUNG-SGH-I897 using XDA App
grrr......
check my new users guide in my sig...
TRusselo said:
grrr......
check my new users guide in my sig...
Click to expand...
Click to collapse
Hahaha! <3 Trusselo

[Q] Rom manager

So i am planning on rooting my note at some point soon but before i do i was wondering if there are any roms on rom manager yet and if there are which ones. I just find it a lot simpler then having to manually flash all the time
THANKS!
I think ROM manager is not compatible with the Note. It is not a supported device.
For an explanation, you can check chainfire's thread in the dev section. (CF-Root)
tomdroid3 said:
I just find it a lot simpler then having to manually flash all the time
Click to expand...
Click to collapse
You'll find out that you will have to flash manually a lot, because not all Roms have the same flashing sequence, and no flash manager can cover all the options.
I'd never want to give up manual flashing myself, because it's such fun (don't ask me why, though).

[Q] ROM Manager help....

Hi guys.
I want to get into rom flashing, but to be honest I find it rather confusing to say the least.
It would appear that ROM manager seems to be the easiest way to flash my phone correct?
Am I right in saying that all I need to do is download whichever rom I wish to install, rename it to "install .zip", put this file on the internal SD (not quite sure where exactly), then use ROM manager to flash, then it's done?
Is this the safest way of doing a flash?
Sorry for the noob questions.
You shud read your previous post dude
Sent from my GT-I9000 using XDA
Omarjivraj said:
You shud read your previous post dude
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Thanks mate. I did, but I'm interested in trying other roms other than 2.3.6.
Darren K said:
Hi guys.
I want to get into rom flashing, but to be honest I find it rather confusing to say the least.
It would appear that ROM manager seems to be the easiest way to flash my phone correct?
Am I right in saying that all I need to do is download whichever rom I wish to install, rename it to "install .zip", put this file on the internal SD (not quite sure where exactly), then use ROM manager to flash, then it's done?
Is this the safest way of doing a flash?
Sorry for the noob questions.
Click to expand...
Click to collapse
I thought ROM manager took all that out of it. All you need to do is make sure your on latest CWM (which is does for you before you can download, i believe) and then you pick your download. Once it finishes it asks you whether you want to install and it does it all for you...
There is no "safe" way to flash. Something can always go wrong. I advise you follow the directions on the threads of your chosen rom. That way you can learn of the current bugs, the best way to flash based on your current situation (GB, Stock, another ICS etc) and what you may need to do before hand e.g. wipe/factory reset
If you have any questions on a particular installation method search the forum and the thread. If you cant find it then ask within the thread of your chosen rom.
Usually if its another rom i believe the best thing to do is wipe/factory reset from recovery menu and then choose zip from sd card. (But you still shoud read the first 2 pages and last 3 pages of the thread)
Talon26 said:
I thought ROM manager took all that out of it. All you need to do is make sure your on latest CWM (which is does for you before you can download, i believe) and then you pick your download. Once it finishes it asks you whether you want to install and it does it all for you...
There is no "safe" way to flash. Something can always go wrong. I advise you follow the directions on the threads of your chosen rom. That way you can learn of the current bugs, the best way to flash based on your current situation (GB, Stock, another ICS etc) and what you may need to do before hand e.g. wipe/factory reset
If you have any questions on a particular installation method search the forum and the thread. If you cant find it then ask within the thread of your chosen rom.
Usually if its another rom i believe the best thing to do is wipe/factory reset from recovery menu and then choose zip from sd card. (But you still shoud read the first 2 pages and last 3 pages of the thread)
Click to expand...
Click to collapse
What is the CWM, and why do I need that?
CWM = colockworkmod. Its basically the a new recovery menu that gives you more freedom to what you can do whilst in the menu. You have it on non-rooted devices (stock firmware/samsung firmware) but as i said it provides more freedom. I believe almost every rom uses a version of it, either adapted or not.
Im not sure you will be able to use ROM manager on a device that is not yet rooted (rooted means you have administrative privileges like in windows). You will need root access as you will be changing the system files which if done incorrectly will cause something to go wrong. Which is why you wish to use ROM manager. TBH is very hard to do something wrong with the SGS and not be able to come back from it to have a fully capable phone again.
Don't rush into anything though. Don't root or flash anything without knowing the risks and what could happen, and in-turn what needs to be done to correct it. If you know this then usually you will understand what went wrong and how to fix it.
Sorry for leaving all these long messages, just trying to be clear

Categories

Resources