I have two captivate I987's. Both are 2.2 and running firefly 3. On one phone I backed up stock froyo with nandroid via cwm. I also backed up the stock kernel via sgs kernel flasher. Can I take the nandroid bu and kernel bu from one phone, put it on my pc, compress to zip, then place in the sd card of the other phone and flash via cwm? Getting me back to stock 2.2?
Also, i use the free version of TIBU. I copied my back up to my pc. When I try to put the backup on my new captivate, TIBU doesn't seem to recognize it. I've placed it in the root of the sd as well as the TIBU folder. Any way to make this work?
1. No.
2. Hit the "problems?" Button in tibu and make sure busybox is installed.
Busy box is installed. Maybe something else not right? Do I have to use paid version? Since I got ur attention, is using odin one click with any build higher than 1010 an almost guarantee of brick. Does anyone know? Currently I have a 1010, and an 1101.
Sent from my SAMSUNG-SGH-I897 using XDA App
Cdub3 said:
Busy box is installed. Maybe something else not right? Do I have to use paid version? Since I got ur attention, is using odin one click with any build higher than 1010 an almost guarantee of brick. Does anyone know? Currently I have a 1010, and an 1101.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I hear it depends on the phone, some do brick but some don't, I've used one click on my 1012 and didn't have any problems but that's just personal experience
Sent from my captivate running Speed and Looks Ginger Style
You don't need the paid version.ummm Make sure it's pointed to the right folder and that it didn't get corrupt copying over from your pc.
I flash and mod 3 captivates: 1 a 1010, and 2 are 1012 all I've used is one click. no problems.
You can have a bootloop issue not a un recoverable brick. Go check the last few pages of the one click thread ... I described what to do when that happens. It's not a huge deal.
And this works for I897 ? Couldn't find ur post in the thread. There seem to be hundreds of replies
Sent from my SAMSUNG-SGH-I897 using XDA App
Cdub3 said:
I have two captivate I987's. Both are 2.2 and running firefly 3. On one phone I backed up stock froyo with nandroid via cwm. I also backed up the stock kernel via sgs kernel flasher. Can I take the nandroid bu and kernel bu from one phone, put it on my pc, compress to zip, then place in the sd card of the other phone and flash via cwm? Getting me back to stock 2.2?
Click to expand...
Click to collapse
That won't work.
And I think you will run into issues with the efs directory if you try it. Your IMEI number will be converted to the IMEI of the other phone. What will AT&T do if two sims are logged on to the same IMEI phone? Don't know. There may be a way to backup everything but the efs directory, but if not, I'm guessing the phone will balk at restoring a backup with four images from one phone, and the efs image from a second phone.
Just used odin one click on my 1101 build. Worked perfectly, which is good, cuz I'm gonna return this thing soon. Since it worked once, with this build, it should work all the time now, right? (unless something else occurs, like bad connection, usb probs etc). If i flash 2.3 roms will it still work, or will the new boots screw it up. read some posts, but wondering if any of you have personal experiences.
Cdub3 said:
Just used odin one click on my 1101 build. Worked perfectly, which is good, cuz I'm gonna return this thing soon. Since it worked once, with this build, it should work all the time now, right? (unless something else occurs, like bad connection, usb probs etc). If i flash 2.3 roms will it still work, or will the new boots screw it up. read some posts, but wondering if any of you have personal experiences.
Click to expand...
Click to collapse
I have a 1008 batch, so I can't speak about model issues, but I have used Odin One Click to flash back to stock JF6 (Eclair) from a 2.3.3 ROM. The new bootloaders should not create any adverse effects for your phone. Odin One Click will flash both bootloaders back to stock Eclair.
Related
So I went to 2.2, back to 2.1, two days later (today) I switch to 2.2, now nothing recognizes root and nandroid says I can't run restore, to run it via adb. I don't use adb/computer! I want aloysius back!
Can't get to a comp to run the ruu then reroot?
DirtyShroomz said:
So I went to 2.2, back to 2.1, two days later (today) I switch to 2.2, now nothing recognizes root and nandroid says I can't run restore, to run it via adb. I don't use adb/computer! I want aloysius back!
Click to expand...
Click to collapse
Its giving the restore error due to one of two things. Ur SD card is full and no room to expand the nandroid restore u made or the nandroid restore u made is corrupted and u need to use a different one.
DirtyShroomz said:
So I went to 2.2, back to 2.1, two days later (today) I switch to 2.2, now nothing recognizes root and nandroid says I can't run restore, to run it via adb. I don't use adb/computer! I want aloysius back!
Click to expand...
Click to collapse
I had the exact same problem after switching to 2.2. It wouldn't let me restore my nand backup. I guess it got corrupted cause I had plenty of room left on the card. I just reflashed a Rom and started over :/
Sent from my HERO200 using XDA App
Another thing you might want to check. Make sure you have repartitioned the card the same as it was, ext2 3 or 4 whatever the case may be.
Silly noob-like question, but I wanted to make sure before I continued messing with my phone.
Does ROM Manager back up EVERYTHING on the phone? For example, I backup my rom. Move the backup file onto my pc. Then I screw around with roms, lag fixes, etc. and totally screw it up. If I "restore" the backup made by ROM Manager, will all my apps, settings, desktop, data files, etc be exactly as they were before I started screwing around?
Or, would I need to use Odin to load the same ROM as that which was backed up and then run Rom Manager Restore?
Thanks!
Yes it does
Sent from my SAMSUNG-SGH-I897 using XDA App
Here's another question regarding this thread:
I have the lagfix mod which uses the internal sdcard. When I create a backup will it and restore exactly how it was including the lagfix partition? If yes, is it the same procedures or do I have to do it a different way with the extra partition?
Thanks in advance.
Deca4 said:
Here's another question regarding this thread:
I have the lagfix mod which uses the internal sdcard. When I create a backup will it and restore exactly how it was including the lagfix partition? If yes, is it the same procedures or do I have to do it a different way with the extra partition?
Thanks in advance.
Click to expand...
Click to collapse
Actually I am trying to figure out the same thing. I made a backup before I started messing around with lag fixes, different roms and so forth. Then the other day I tried to restore a rom it didn't work. Eventually I soft bricked the phone and had to make the USB Jig to get it working again. Needless to say I am very intrigued with what exactly Rom Manager does backup and its limitations but I can't seem to find it anywhere. I am thinking the reason my backup was screwed up was because of a lag fix, only problem is I can't remember what lag fix I had on it when I did the initial recovery.
Something from my experience to add here:
Scenario 1:
-----------
I backed up the original 2.1 JH7 on my phone.
Installed 2.2 custom ROM, and played around with it.
Backed up 2.2 ROM.
Messed up with my 2.2 custom ROM.
Went to ROM manager recovery, and recovered the backed up 2.1 JH7, and ended up messing up. My phone didn't even boot up.
Then I went back to recovery, and tried restoring the backed up version of 2.2.
Phone booted up into 2.2, but, started giving a lot of FCs.
Scenario 2:
-----------
Installed 2.2 custom ROM 1.
Backed it up.
Messed it.
Restored it - worked fine.
Installed 2.2 custom ROM 2.
Backed it up.
Restored the 2.2 custom ROM 1.
Everything working fine.
Looks like as long as the core OS is of the same version, it seems to work.
Maybe there is something in the boot sequence that's probably not being restored (???)
---------------
Edit: I do not have CWM app installed. I use the CWM update.zip recovery manager since its the least intrusive way.
diablo009 said:
Something from my experience to add here:
Scenario 1:
-----------
I backed up the original 2.1 JH7 on my phone.
Installed 2.2 custom ROM, and played around with it.
Backed up 2.2 ROM.
Messed up with my 2.2 custom ROM.
Went to ROM manager recovery, and recovered the backed up 2.1 JH7, and ended up messing up. My phone didn't even boot up.
Then I went back to recovery, and tried restoring the backed up version of 2.2.
Phone booted up into 2.2, but, started giving a lot of FCs.
Scenario 2:
-----------
Installed 2.2 custom ROM 1.
Backed it up.
Messed it.
Restored it - worked fine.
Installed 2.2 custom ROM 2.
Backed it up.
Restored the 2.2 custom ROM 1.
Everything working fine.
Looks like as long as the core OS is of the same version, it seems to work.
Maybe there is something in the boot sequence that's probably not being restored (???)
---------------
Edit: I do not have CWM app installed. I use the CWM update.zip recovery manager since its the least intrusive way.
Click to expand...
Click to collapse
Interesting, it would makes sense in what you are saying. My error that I go was when I went from my original JH7 backup, installed a rom based on JH6 and then tried to install my original backup. I might have to try JH6 roms and see if I can restore to them easily or not. I will have to wait for Micro USB cables to come in as I don't have a spare since I used my only cable to make the JIG.
The kernel and modem aren't backed up, so if your backups use different ones and you try to restore them you'll have issues.
I herd a rumor that rom manager doesn't work with froyo on the captivate. But I could be totally wrong.
Sent from my SAMSUNG-SGH-I897 using XDA App
peachpuff said:
The kernel and modem aren't backed up, so if your backups use different ones and you try to restore them you'll have issues.
Click to expand...
Click to collapse
This is what I have read about it as well
Voodoo
There is also a different version of CWM Recovery (what Rom Manager uses to back things up) for the voodoo lag fix.
tnerb123 said:
I herd a rumor that rom manager doesn't work with froyo on the captivate. But I could be totally wrong.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
It works. I backed up and restored a few variants of Froyo ROMs.
peachpuff said:
The kernel and modem aren't backed up, so if your backups use different ones and you try to restore them you'll have issues.
Click to expand...
Click to collapse
How do I backup these? Is there any way?
If Ron Manager does backup the kernel and modem why would so many people have problems restoring back to different Roms? This is why I am so puzzled with this software.
Sent from my SAMSUNG-SGH-I897 using XDA App
Rom Manager can backup EFS folder ??
i lost my imei and the only backup that i have its from Ron Manager
Absolutely it does there!
Maybe I'm old fashioned, but best bet is backup from recovery. Saves everything down to browser login data. Can't go wrong with a full backup! I make one every time I flash just about anything.
Sent from my SGH-I897 using xda app-developers app
Rom Manager vs CWM Recovery
yes Rom Manager can do backup of phone..but why not just do
a Nandroid Backup from CWM Recovery..
never had problem with Nandroid Backup from CWM Recovery :victory:
dobi3 said:
yes Rom Manager can do backup of phone..but why not just do
a Nandroid Backup from CWM Recovery..
never had problem with Nandroid Backup from CWM Recovery :victory:
Click to expand...
Click to collapse
Agreed!
Sent from my SGH-I897 using xda app-developers app
Trying to find a quick ROM recommendation that is safe to get started with my AT&T i897.
Darkys seems popular but then in the install guide it says ...
The Samsung Galaxy S comes in several types. The ones that are compatible with Darky's ROM, are the GT-I9000 (International), the Verizon and Bell South. Check your Firmware Version.
So it looks like I should not use this with my AT&T i897.
Then the Rogers ROM talks about i896, so I guess cannot use this either.
Any quick recommendations for an i897 ROM to get started?
Are any 2.3 ROMs out yet?
No stable 2.3
I would not try darkeys for your first flash.
Don't get hung up on phone model if it is in captivate development then.... Captivate friendly
Andromeda
Cognition
Phoenix
Continuum
And many more are good
Before you flash do you understand how to do it? Better to learn before then panic later
mcord11758 said:
Before you flash do you understand how to do it? Better to learn before then panic later
Click to expand...
Click to collapse
thanks ... hopefully but it is a bit stressful .. i had some long hours with my liquid when it went wrong!
I think I know how to do it .. just following this ..
http://forum.xda-developers.com/showthread.php?t=884364
my phone has ..
2.1-update1
I897UCJF6
2.6.29 [email protected] #2
I am skipping the titanium backup step as I dont need to keep any apps or settings.
I am skipping the ODIN step because I think I am already on the stock firmware (and I only have access to linux and ODIN is for windows and I would need to use that other replacement that is compiled for linux).
So I am just doing the rooting and clockwork recovery steps.
Does that sound ok?
What build is your phone? Located under battery? Something like 1008
heimdall
You may need this down the line, flash stock with linux
http://forum.xda-developers.com/showthread.php?t=755265
mcord11758 said:
What build is your phone? Located under battery? Something like 1008
Click to expand...
Click to collapse
1007 .. Does this make any difference?
sml12 said:
1007 .. Does this make any difference?
Click to expand...
Click to collapse
It can but you are fine.
A suggestion, download android id changer from market. Open app, select save id. It creates a file in your internal sd called update.id. When toy flash a ruin dl the app again, load id, change id.
Your across id is unique to your device but is lost with flash, this keeps it
sml12 said:
1007 .. Does this make any difference?
Click to expand...
Click to collapse
Yes, it does. For phone with build 10.10 and later, there is a different process to restore stock. Odin one click doesn't work well.
Another thing you should do is backup your /efs directory specifically nv_data.bin.
Sent from my SGH-I897 using XDA App
So if I install a custom ROM and then want to try another custom ROM ... do I need restore back to stock with ODIN or HEIMDALL before every custom ROM flash?
sml12 said:
So if I install a custom ROM and then want to try another custom ROM ... do I need restore back to stock with ODIN or HEIMDALL before every custom ROM flash?
Click to expand...
Click to collapse
No. you want to be carefull of lag fixes but for the most part they are all compatible. This week I went from docs to andromeda to continuum to paragon. I never flashed stock
which was your favourite ROM of those examples?
i wonder when you really need to use ODIN or HEIMDALL?
For someone who had not flashed before I would go with andromeda. It is a nice rom and is stable and fast. or you may want to look at phoenix. Active friendly devs that respond to questions.
I am on paragon right now and I really like it. The rom had an over clocked kernel which I switched out because oc is not my thing. You can't go wrong with any that I mentioned.
Which rom is best is a matter of opinion.
If things go wrong with a flash is when you need to flash stock
Try the one in my signature. And the scores say it all. I get home with about 50-60% battery after a moderate use day (1 hour talk and 1 hour of activities that keep screen on, apart from push email accounts).
Thanks guys.
I'm ready to get started .. will report back soon
Ebvad said:
Another thing you should do is backup your /efs directory specifically nv_data.bin.
Click to expand...
Click to collapse
I searched for this file and could not find it
EDIT .. let me look in file system not SD card and not internal memory.
EDIT .. installed ASTRO and looked in operating system files. I found the /efs folder but it was empty. Searched for nv_data.bin and could not find the file.
sml12 said:
I searched for this file and could not find it
EDIT .. let me look in file system not SD card and not internal memory.
EDIT .. installed ASTRO and looked in operating system files. I found the /efs folder but it was empty. Searched for nv_data.bin and could not find the file.
Click to expand...
Click to collapse
Try super manager
I wasted some time today .. tried Andromeda, Paragon, Serendipity .. the market seemed to crash on Paragon ... Andromeda was nothing special ... but then tried Continuum and that is really awesome!!
So I've stuck with Continuum for now
sml12 said:
I wasted some time today .. tried Andromeda, Paragon, Serendipity .. the market seemed to crash on Paragon ... Andromeda was nothing special ... but then tried Continuum and that is really awesome!!
So I've stuck with Continuum for now
Click to expand...
Click to collapse
Different strokes for different fokes. Find what you like today then flash something else tomorrow.
mcord11758 said:
No. you want to be carefull of lag fixes but for the most part they are all compatible. This week I went from docs to andromeda to continuum to paragon. I never flashed stock
Click to expand...
Click to collapse
I have read the pages on flashing with CWM, and I normally Odin to stock and Master Clear. How do you flash without doing this and not causing problems? Thanks!
First off don't shoot me. I am interested in getting Gingerbread on my Captivate or another good rom. I have been on the forum for a few years but have never done amything to my phone until now. I just rooted it and installed Rom Manager and Titanium backup. I have been reading so many threads that my head is spinning. There are alot of different roms available but I have no idea of which to use. Can someone please point me in the right direction to put Gingerbread on my phone? I have had this phone for over a year and am ready for a change without having to buy a new phone. I have never flashed a phone before but I have built my own computer, so I am not a total newbe and am not affraid to try something new.
My phone:
Firmware 2.2
I897UCKB1
Kernel 2.6.32.9
Build Froyo.UCKB1
Rooted
Rom Manager
Titanium Backup
Bang!
Sent from my SGH-I897
ou812bkewl said:
Bang!
Sent from my SGH-I897
Click to expand...
Click to collapse
Figures another Texan would shoot me. Good thing I am wearing my bullet proof vest today.
Thanks!
Lol, its cool man....any of the ops in each rom are very detailed in how to flash. Designgears have a great Odin oneclick to stock that's a must have in case something get borked. The Fasty GB roms are my favorite choice. Any of the KH3 roms wont disappoint. Make sure you use the correct bootloaders too. Happy flashing!!
Sent from my SAMSUNG-SGH-I897 using XDA App
http://forum.xda-developers.com/showthread.php?p=7287634 check this out here for back-to-stock info. I would try CM7 since you already have some experience with it. They have allot of info in their thread in the Dev forum. That is what I run and I like it because I didn't have to flash bootloaders and its one of the simplest to install. Is your captivate running stock 2.2?
Sent from my SGH-I897
Not difficult at all:
*download ODIN 1.81 on your pc
*download latest KI2 stock ginger rom from the dev forum
*back up your apps etc using titanium backup to external sd card
*perform factory reset on cappy
*open ODIN and place downloaded .tar file that u downloaded earlier in "PDA" section
*turn off phone and hold vol up&down while turning on to start download mode
*plug phone in usb cable hooked to computer
*say a small prayer, lol
*once connection is established, press start on ODIN
*when flash is completed phone will reset, u may unplug usb cable when u see the ATT screen on phone
*that's it, if your successful then u can perform root, which is done differently than 2.2, so be prepared, I can PM u or respond here to tell u how if your successful with the gingerbread flash.
Good luck, and remember, bootloaders will be flashed, so there is an outside chance to screw your phone, so proceed with caution.
If I use Titanium Backup then don't I need to be rooted in order to restore my apps and contacts?
ou812bkewl said:
http://forum.xda-developers.com/showthread.php?p=7287634 check this out here for back-to-stock info. I would try CM7 since you already have some experience with it. They have allot of info in their thread in the Dev forum. That is what I run and I like it because I didn't have to flash bootloaders and its one of the simplest to install. Is your captivate running stock 2.2?
Sent from my SGH-I897
Click to expand...
Click to collapse
Duh! Read the OP stupid! (Schizophrenic humor) Ok. Remember CM7 might not have the best battery life but I have always seen it as the least risky way to get GB running on the Captivate because you're not flashing bootloaders that are different from what you already have with stock 2.2 . The ONLY time I ever hard bricked was when attempting to flash GB bootloaders over Froyo bootloaders. Just be careful.
Sent from my SGH-I897
LBCaptivate said:
If I use Titanium Backup then don't I need to be rooted in order to restore my apps and contacts?
Click to expand...
Click to collapse
You have to be rooted to restore apps using titanium, not for contacts though.
ou812bkewl said:
http://forum.xda-developers.com/showthread.php?p=7287634 check this out here for back-to-stock info. I would try CM7 since you already have some experience with it. They have allot of info in their thread in the Dev forum. That is what I run and I like it because I didn't have to flash bootloaders and its one of the simplest to install. Is your captivate running stock 2.2?
Sent from my SGH-I897
Click to expand...
Click to collapse
My Captivate is stock and rooted.
Titanium Backup requires root to backup or restore anything.
Sent from my SGH-I897
nok6100 said:
You have to be rooted to restore apps using titanium, not for contacts though.
Click to expand...
Click to collapse
I would be using Titanium to backup my contacts unless there is a better way. I have several groups in my contacts for work and personal ring tones for different groups. It would be a major pain to have to set them up again.
LBCaptivate said:
I would be using Titanium to backup my contacts unless there is a better way. I have several groups in my contacts for work and personal ring tones for different groups. It would be a major pain to have to set them up again.
Click to expand...
Click to collapse
What I have always done is to export my contacts to the external sd card by using "import/export" function in the contacts app, not sure if it would have a impact on all of your settings though because I have always used a simple setup, single ringtone for everyone in my contacts. Just be prepared in case something doesn't work as expected. I have no experience with using titanium to backup the contacts.
nok6100 said:
What I have always done is to export my contacts to the external sd card by using "import/export" function in the contacts app, not sure if it would have a impact on all of your settings though because I have always used a simple setup, single ringtone for everyone in my contacts. Just be prepared in case something doesn't work as expected.
Click to expand...
Click to collapse
Exporting the contacts is not an option since it will take a contact with multiple numbers and turn them into an indvidual one for each number. I have used AndroidSync Wifi to backup contacts and it seems to work pretty good. I have never used Titanium before so I am not sure how well it works with contacts.
The easiest way to back up your contacts is to save them to google. Lol. +1 on the KI2 rom, Flashed it a few days ago and it's amazing... I'm no longer tempted to cash in 80 hours of PTO to get the Galaxy SII tomorrow.
nbell13 said:
The easiest way to back up your contacts is to save them to google. Lol. +1 on the KI2 rom, Flashed it a few days ago and it's amazing... I'm no longer tempted to cash in 80 hours of PTO to get the Galaxy SII tomorrow.
Click to expand...
Click to collapse
Do you know which thread has the current information on KI2? There are a lot of different threads. Thanks!
Never mind. This is getting to confusing. Some say you need a kernel and some don't. Then there is the Flash clockworkmod Recovery. Is this the same thing that is in Rom Manager? Do I get the full version of Rom manager and flash with that? Do you use Odin? Do you flash to stock? I am already running 2.2 rooted.Threads are 500-1000 pages long, some have old information, ect.............where is the most current updated information????? CM7 nightly builds?? Do you flash everyday? Is there a stable build? Ect.........
KI2 original thread
http://forum.xda-developers.com/showthread.php?t=1282369
download link is in there, just stick the file in the pda slot in odin, put phone into download mode, and flash away... everything you need is in that file (bootloaders, kernel, etc).. it's the stock at&t leak, so it also has bloatware, but oh well.
nbell13 said:
KI2 original thread
http://forum.xda-developers.com/showthread.php?t=1282369
download link is in there, just stick the file in the pda slot in odin, put phone into download mode, and flash away... everything you need is in that file (bootloaders, kernel, etc).. it's the stock at&t leak, so it also has bloatware, but oh well.
Click to expand...
Click to collapse
^^^^^^
After you get stock 2.3.5 Root with Fugu Method here:
http://forum.xda-developers.com/showthread.php?t=1127249
In step 6. replace KF1 kernal with Boogs modified KI1 Kernel here:
http://forum.xda-developers.com/showthread.php?t=1242533
ClockWork Mod recovery with Boogs KI1/KI2 Kernel Here:
http://forum.xda-developers.com/showthread.php?t=1242533
Then you'll have KI2, Root, CWM Recovery, Init.d Support.
If you want extended power menu and crt animation follow with emunees [CWM][DEODEXED][ROOTED][ZIPALIGNED] I897UCKI2 [Android 2.3.5] here:
http://forum.xda-developers.com/showthread.php?t=1283566
And the Ext menu and CRT Zip is here:
http://forum.xda-developers.com/showthread.php?t=1283075
This will give you the latest and greatest Closest to stock 2.3.5 ROM with CWM and Root. Im a nubby and I pulled it off. So anyone can do it.
Steve
I still have not flashed. Have been reading threads for hours and hours. So much information and so many Roms Here is what I would like, swipe, get all my contacts back in groups (important for work)and a good stable rom. Seems like each rom has its issues, GPS, download ability, speed of download, some media files not working, poor call quality, not getting text messages, ect......... I know that the developers don't like to recommend roms but with all the different roms and some threads being close to 1000 pages long, it is hard to tell what is considered stable and what is an alpha or beta and what is current. The information on my phone is below. Any help or suggestions to a few good roms with complete instructions would be appreciated. Is rom manager even an option for flashing?
I would understand if the mods close this thread but I am sure that I am not the only one overwhelmed by all this information. It is pretty amazing how many people contribute to the development of all the different Roms.
Thanks again for any help or guidance!
Okay first of all, I would like to apologize if this is being posted in the wrong forum, or if I am upsetting anybody by posting this. I have searched all over for a couple days trying to figure this out. This is my last resort, and I'm hoping you guys can help. All of your time and understanding is much appreciated!
So a little background. About a week ago, I rooted my AT&T Captivate 2.2(build number 1012 if that helps) using Superoneclick, and then flashed CM7.1 using clockworkmod. I was not satisfied with CM7.1(terrible battery for me, other various reasons). I then downloaded MIUI (not sure which version, the one available on the premium version of clockworkmod) and flashed it using clockworkmod. This started with the cm bootscreen, and then went to an MIUI bootscreen that played a little tune. The miui screen looped, and it would not go past this.
After rebooting and running into the same thing, I went to f\attempt to find a solution. I thought I backed up my rom, but it had been erased (issue with the external sd I think). I used an odin one click I found on here, but this odin one click brought me back to eclair 2.1, instead of 2.2. Up until now, I could get into both download and recovery mode using the three button method, and now I can't. I am not sure what to do exactly. I have read about getting it into download mode using adb, but I'm not sure if that would work in my situation, and I'm not too educated on adb or android sdk. I stayed up almost all night last night, and now have researched most of today, not making much progress.
Thanks again for your time!
Just to clarify have you used all button methods in order to try to get into download mode. Seems as though flashing bootloaders may have f'ed up you combos. I have a couple suggestions. I'll edit my post as I find the urls to post for you
Stock GB ROM you should be using -- http://www.mediafire.com/?05nemq5yyn5fuqf, this one has bootloaders, but preferably you should use stock odin roms that don't mess with the BL's (after this of course, since yours are messed up right now).
Now of course this depends upon you getting into download mode. If you can use ROMmanager (btw, I don't recommend you download your roms from rommanager, as that will not always be the most up to date and may not be the one for you) to get into recovery mode, then from there go to advanced then reboot download. However some kernels do not support this. Try the cable methods before trying this method.
First of all, I appreciate your help Mikel.canovas. I have used all the button methods. I can no longer get into recovery or download. (Romtoolbox enables me to get into recovery(2E), but not download). I now have root access, but am not able to sideload apps, and apparently rommanager free isn't available on the market. I did buy rommanager premium, but unfortunately now that I basically reset my phone, it doesn't show up as bought (known issue, apparently not resolved?), and even after I bought it again, it says I need the free version to even use the premium version.
Should I go through the process to be able to sideload apps? Or will romtoolbox do the trick? Rom toolbox gives me the option to install a rom from my sd card. Should I use that, and select the GB ROM you provided? I'm not sure I understood exactly how you want me to get that GB ROM onto my phone.
What I want to eventually have is either MIUI or rom fasty on my phone. If possible, could you give me some steps on how to reach that goal?
Thanks again for your time. Eclair on the captivate is not pleasant, especially since I had a taste of CM.
Well first off I highly recommend Mosaic over CM or Fasty, solely because of performance and battery life. However that is all subjective.
Ah since you're rom is sending to 2E recovery, you're not rooted with cwm. You need to flash another kernel that supports this. Afterwards, If you can get into CWM, I recommend putting CM onto your sdcard and flashing from there. After booting into CM hold down the power button, press reboot, choose reboot download. See if that works. If not, does adb reboot download work for you? If not again, I recommend trying another USB port, reinstalling drivers, trying different button combos. I've had issues getting into download mode in the past and, trust me, it is VERY frustrating.
Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?
korockinout13 said:
Well first of all, before you back into flashing stuff, don't flash to stock unless you have done everything possible with the tools on your phone. I'm assuming you gave it at least 5 minutes to boot up, as the first boot can variably take longer. You could go into recovery and wipe stuff, or you could have gone back to CM7. A flash to stock is probably never necessary in the situation you reported.
Anyway, if you can get into recovery, maybe try getting a kernel that allows you to reboot into download from recovery. Although that will depends on what kernel you are on right now, as I know speedmod kernel has that option, but you would need to get to download to flash that.
And as another poster wrote, have you tried all button combinations?
Click to expand...
Click to collapse
Or download SGS Kernel Flasher from the market. You can then flash kernels with the app. without having to go into download mode. Very handy.
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
If nobody beats me to it, I will post you some links tomorrow when I'm on my laptop.
Oh, and miui won't really give you better battery life than CM7. It basically is CM7 with a different UI. I loved CM7 a ton, so if you are having issues with it, let me know! With the right kernel and other settings, battery life is pretty decent, as long as you charge nightly.
Sent from my ICS i897 Captivate
wwcjr91 said:
Once again guys, thank you for your time. A little more information:
Kernel:
2.6.29
[email protected]#12
Baseband:
I897UCJF6
Let me know if you need any other information.
I am able to get into download mode using the terminal emulator in rom tool box. (The free version of rom manager is no longer on the market)
I was hoping one of you could give me a step by step of what I need to do, with links to downloads.
And yes, I have tried all off the three button methods. Also, I probably should have researched more before I flashed back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on
Alright, thank you, I will be checking back tomorrow.
Eventually what I want is to have the working 3 button combos again for both download and recovery mode, and either the miui, mosaic or rom fasty on my phone.
Easy flash GB BL's and you won't have to worry about 3 button problems!
If you didnt do a Master Clear, now would be the time. Make sure you back up anything you want to keep. MC will erase EVERYTHING on your internal SD
Remove your Micro SD, and your SIM
Download:
OneClick Root
SideLoadWonderMachine This also has CWM, 3ButtonFix and ROM Manager in the zip
Make sure you have Debugging enabled
Connect to your PC
Run One Click Root, and follow the instructions, reboot
Run Sideload Wonder Machine and direct it to install ROM Manager
Copy the update.zip(CWM) and 3Button Fix to your phone
Open ROM manager and "reboot to recovery"
You'll go thru the boot twice to get to CWM
In CWM install the 3 Button Fix
I usually pop out the battery and check it before I put the ROM in.
VERY IMPORTANT!!!!! DO NOT TRY TO USE THE 3ButtonFix while you have a GB ROM installed you WILL brick your phone. It only works on 2.1, and 2.2 ROM's
using this one click package I now am able to manually enter download and recovery :
http://forum.xda-developers.com/showthread.php?t=1129821
However, The recovery is still 2e..
kangi26 said:
What is the build number of your phone? It's located under your battery, looks something like 10.06,10.07, 10.08 and so on
Click to expand...
Click to collapse
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.
wwcjr91 said:
1012, do you think any of my problems would have to do with the build number? WHen I got it, it had froyo with the working button combinations.
Sorry, I didn't see that until now.
I now have clockwork recovery, and I'm about to try out fasty. Thanks again guys.
So can I delete this thread? And if so, should I? I've found plenty of threads that seem outdated, and fill up the search engine.
Click to expand...
Click to collapse
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info
kangi26 said:
The only reason I asked about the build # is because the 10.08's were pretty commonly known to have 3 button issues. Also, anything above 1012 and using Odin1 Click could soft brick. I was just checking as I was offering info
Click to expand...
Click to collapse
Trying to fix my buddys cappy. Its rooted on T-Mobile and running stock 2.1 rom. I'm not a Samsung guy so how do I get cwm and a 2.3 rom? The build number is ECLAIR.UCJH7
Sent from my Incredible 2 using xda premium
Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Post #3 has the "leaked" KK4 (Been confirmed to be the same as official).
4-2ndtwin said:
Go to this Stickied Thread in the Development Forum... http://forum.xda-developers.com/showpost.php?p=18370235&postcount=1
And u will have to use one with the Bootloaders included, because to run a gingerbread firmware u gotta have the gb bootloaders.
Click to expand...
Click to collapse
Since its already rooted do I need a computer?
Sent from my Incredible 2 using xda premium
Yep. Because these are Odin or Heimdall One Clicks.
You can't just flash to a GB firmware/rom from Eclair/Froyo without using Odin or Heimdall to at least get the Gb Bootloaders. You cannot just go through CWM recovery unless u already have the GB Bootloaders.
Of course u can get it all through mini Kies, the official GB 2.3.5 KK4 update that is.