I tried rooting my US Cellular Tab with the VZW rom, as others had said it worked. But now I need to switch it back and my backup of the original rom is corrupted. Could anyone direct me to a copy of the stock rom?
Thanks
Related
Hi all, I am in somewhat of a confused state right now and hope you can help...
I have one of the first I9000s that O2 shipped here in the UK. My phone reports firmware of PDA/Phone I9000ADJF1 and CSC I9000O2UJF2. As I am in the UK I would have expected this to be one of the I9000XX firmwares and cannot seem to find any reference to the AD firmware anywhere.
Can someone shed any light on what the AD firmware is? Could it be that it is O2 specific and if so, do you think that flashing an XX firmware would cause a problem? I am just a little concerned about flashing this when 2.2 is officially out, hence the questions.
Please forgive my ignorance if the answer is simple, this is my first android phone
Bob
Before you do anything...
PLEASE back up your phones rom and host it online!
there are several of us on this forum who have o2 UK phones and have since upgraded losing our original firmware. If you upgrade and dont back up your original rom you cant send it back for warrenty!
So at least make a backup using odin, or if anyone else knows the way to extract the rom please say now lol.
Other then that I9000ADJF1 is fine for flashing I9000XWJM2 or any of the other european ones. the AD just stands for '02'
Will ROM Backup within ROM Manager do as a backup? I had to Root the phone, then backed up ROM to SD card. I got same ADJF1 Rom.
use clockwork recovery from ROM Manager (from the market) and do a nandroid backup
bommel0815 said:
use clockwork recovery from ROM Manager (from the market) and do a nandroid backup
Click to expand...
Click to collapse
Ye. This is what i did. I just wander what it will contain rppted image. I will probably enable to unroot it later. Will all get back to normal(unrooted phone with warranty) then official froyo arrive?
Hey guys, I have a i800 from uscc, a regional cdma carrier in the us, I cant find a stock rom to download. If anyone has the stock rom or a stock nandroid image backup id appreciate it. thanks
Me too! Got my tab bricked and I can't flash any modem to it. When I flash Sprint modem.bin file, tab gets bricked. Any suggestions or has anyone got US Cellular Galaxy Tab and can do a ROTO or Nandroid backup? Any help with these files is greatly appreciated. Thanks!
Somehow while Rooting and Updating I lost all 3g service on my Verizon Tab. This is a replacement Tabe sent to me by Verizon. When I tried to restore the info from my prior Tab this one came up "No Service" I tried going back to stock, all the previous backups still on my SD card. Nothing works. Anyone know what I need to do to get the 3g back......
Oh ya
The baseband version is unknown
http://forum.xda-developers.com/showthread.php?t=955342
You need these I had a similar situation, but these are all the files you need including the modem for 3g
I followed those instructions when I tried to go back to stock. Do I just need to add the modem file in the modem spot in Heimdal or do I need to put all the original file back as well?
i did a complete reload when i did mine using heimdall
Hold down power and volume down to get into download mode.
factoryfs.rfs in factoryFS
zimage in Kernel(zimage) and recovery
this is important read carefully before selecting
there are 2 param. files you want the param. lfs it goes in param.lfs slot
cache in cache
and modem in modem
Those are the only files you will need. It worked from me I have been working on themeing the tab using the deodexed roms posted in development so i have really got stuck before and these have saved me everytime. Hoping to post and accurate battery mod ported from sbrissen over on the fasc forum he has been helping me on it and i think i have a stable version
hope this helps
chris
No luck, tried flashing the files twice no change. Still no 3g and the baseband still says unknown.
you said after you restored from your previous tab, What happened to the previous one? the same thing? and how did it get that way?
On the previous tab I was running KhasMek's K-leanMod v3’s Rom and KhasMek Voodoo Plus v5 Now with Full Voodoo CwM Kernel. I wanted to go back to stock so I could get the latest Verizon update. I wanted the Bluetooth HID access. After I converted back to stock I was unable to load the update. It would download but not install. The Verizon tech was unable to help me so they sent me a new one. I realized that I forgot to disable the lag fix before I went back to stock.
This time I Rooted (using super one step root), installed Titanium backup and installed my backed up apps. When I rebooted I lost the 3g service.
did you remove root and tb b4 you tryed flashing the stock files? Also did you have voodoo active if so deactivate before flashing back to stock.
Has anyone found a way to flash back to the original at&t rom when the current rom used is overcome?
I downloaded a stock firmware, but will it work? I need it to work with the at&t splash screen and everything?
I hear mixed reports on this, but nothing successfull yet?
Can anyone help me here?
Thanks
I would also like a at&t stock rom that works. Does anyone have one?
I'm about to retire my rarely used AT&T to Craigslist and I wanted to flash it back to stock. I have a number of roms and files on my computer by I can't seem to find my original backup when I received the device. Does anyone have a flashable copy of the original Samsung AT&T firmware? I looked on Samfirmware.com and they don't have anything.
I suppose I can just use the generic 2.3.x but I'd just like to put it back stock if possible. Its running some horrible 4.0 ROM right now and it was more usable in 2.3.x form.
aygriffith said:
I'm about to retire my rarely used AT&T to Craigslist and I wanted to flash it back to stock. I have a number of roms and files on my computer by I can't seem to find my original backup when I received the device. Does anyone have a flashable copy of the original Samsung AT&T firmware? I looked on Samfirmware.com and they don't have anything.
I suppose I can just use the generic 2.3.x but I'd just like to put it back stock if possible. Its running some horrible 4.0 ROM right now and it was more usable in 2.3.x form.
Click to expand...
Click to collapse
can you send now running firmware file? or send the link for following guide
Did you find original firmware for i987?
I am trying to use my i987 AT&T US Galaxy tab on their "Tablet" $15 month plan and it won't work. The lady at the store tried many different things, but as soon as I plug a cell phone SIM in, it works fine.
I am guessing since it is upgraded to a PN1000 through overcome and even running all the CM versions, AT&T somehow sees it as a phone rather than a Tablet. I am thinking I have to all the way back to the original 987i firmware to get this to work, so I need help finding it. If anyone thinks it is the Modem.bin file and there is a version that makes it work with a standard data plan for tablets, please let me know.
Thank you
aygriffith said:
I'm about to retire my rarely used AT&T to Craigslist and I wanted to flash it back to stock. I have a number of roms and files on my computer by I can't seem to find my original backup when I received the device. Does anyone have a flashable copy of the original Samsung AT&T firmware? I looked on Samfirmware.com and they don't have anything.
I suppose I can just use the generic 2.3.x but I'd just like to put it back stock if possible. Its running some horrible 4.0 ROM right now and it was more usable in 2.3.x form.
Click to expand...
Click to collapse