Database Develop

[Q] Bell Galaxy S i9000m running on Rogers... Gingerbread?

Hi All,
I bought the Bell version of the phone (Vibrant) because I wanted the front facing camera... Then unlocked and rooted it and inserted my Rogers SIM and have had no issues for quite a while. I successfully loaded Froyo when it became available on Kies without any sd problems. (had to re-root but no big deal).
Now I understand that Bell has released Gingerbread via Kies, but when I open Kies, it doesn't recognize my firmware at all... just shows blank.
I un-rooted and erased all data to see if that would allow me the upgrade but still nothing...
Can anyone offer any assistance or have the files that I can install using a different method?
Much appreciated,
Jamie

Use the search Luke....
Seriously, there is a huge thread detailing Bell's KG3, including dumps you can flash with Odin instead of using Kies. The best part? Even though it is only 9 posts down from yours, I ever got you the link http://forum.xda-developers.com/showthread.php?t=1211939
If you don't want to use KG3, just flash any of the Gingerbread roms in the development forum and flash an appropriate modem. 99% of those threads include flashing instructions.

shadoslayer said:
Use the search Luke....
Seriously, there is a huge thread detailing Bell's KG3, including dumps you can flash with Odin instead of using Kies. The best part? Even though it is only 9 posts down from yours, I ever got you the link http://forum.xda-developers.com/showthread.php?t=1211939
If you don't want to use KG3, just flash any of the Gingerbread roms in the development forum and flash an appropriate modem. 99% of those threads include flashing instructions.
Click to expand...
Click to collapse
Thanks,
I did read most of that thread but can't find anyone else who's using a Rogers SIM on an i9000m... I don't like or use Kies very often and I'm getting annoyed that it won't seem to even read my current firmware. MyPhoneExplorer seems to read it just fine but Kies seems to only want to be some kind of media toy.
I will borrow a Bell SIM to see if it will recognize long enough to use the Kies update, and if that fails I'll flash with Odin.
I assume I'll have to root again once I flash?

robinsonj said:
I assume I'll have to root again once I flash?
Click to expand...
Click to collapse
Yes you will.

make sure you have the latest version of kies, also make sure your csc is set to BMC (open dialer *#272*"your imei"*), select BMC and isntall that will factory reset your phone btw... after that it should work... I am not sure that a Rogers Sim card is affecting it, have you tried just pulling the SIM altogether and connecting? Are you running any custom ROMs currently or have you in the past? Maybe flash back to UGKC1 with Odin if you are and then use Kies to update.

Ended up finding some detailed instructions on "MostlyIrrelevant" for installing 2.3.4 with a Rogers (and Bell) supported Modem. a couple more steps to install the ROM, but it's a deodexed version of the international release with the bloatware removed and TW Launcher removed and replaced by TouchWiz... nicely also has CWM and Titanium in it too, so flashes are much easier from now on. (small workaround to get Bluetooth working but the solution was also in the comments section.) Next step to get back a couple pieces of Samsung bloatware back on... mostly SocialHub and Samsung e-mail... so I can connect all my contact lists and e-mail accounts into one place. I bookmarked the link to Pharaohnough's posting of the apks for these apps (THANKS!) that I want back but will have to wait 'till after work to try them.

Rogers tab 7" convert to phone questions

hi all
i picked up a used rogers galaxy tab 7".upgraded to 2.3.3 official via kies.
GT-P1000R
rooted it.
unlocked it.
now i wish to use the phone capabilities and have a few questions.
i see in a couple posts that you no longer have to flash a complete rom,just a modem.
is that info correct?
i see that the jm2 modem seems to work best with the rogers tab,so do i just flash the modem with odin and that gives me the voice capability.
or do i need to flash a complete rom(European)?
also there is no dialer program so where do i get that at?or does it come with the modem flash.
is there a better modem than jm2 for the rogers tab?or the bell i9000 modem?
i am in canada
thanks,jeff

kbg1 said:
hi all
i picked up a used rogers galaxy tab 7".upgraded to 2.3.3 official via kies.
GT-P1000R
rooted it.
unlocked it.
now i wish to use the phone capabilities and have a few questions.
i see in a couple posts that you no longer have to flash a complete rom,just a modem.
is that info correct?
i see that the jm2 modem seems to work best with the rogers tab,so do i just flash the modem with odin and that gives me the voice capability.
or do i need to flash a complete rom(European)?
also there is no dialer program so where do i get that at?or does it come with the modem flash.
is there a better modem than jm2 for the rogers tab?or the bell i9000 modem?
i am in canada
thanks,jeff
Click to expand...
Click to collapse
you need a euro based rom (official or custom) and bell i9000 modem.

hi
i have the bell i9000 modem already downloaded but not flashed.
which european rom would work best with the rogers tab.
i prefer 2.3.3
thanks

kbg1 said:
hi
i have the bell i9000 modem already downloaded but not flashed.
which european rom would work best with the rogers tab.
i prefer 2.3.3
thanks
Click to expand...
Click to collapse
that i don't know, 'cos i am on 2.3.5 with af974's ROM since day 1

kbg1 said:
hi
i have the bell i9000 modem already downloaded but not flashed.
which european rom would work best with the rogers tab.
i prefer 2.3.3
thanks
Click to expand...
Click to collapse
Careful what you flash though, if it's from XDA any ROM should do you okay but Samsung official ROMs may contain locked boot loaders. Catch up on some reading before doing anything.
Also i suggest that you do a complete backup of your tab before flashing anything else so that you could revert back in case of issues. Stock ROGERS firmware is hard to find. And if you do a backup I wouldn't mind a copy of it as long as you keep your personal information out. As a matter of fact, what i am after is a un-rooted fully stock ROGERS ROM. As i have deleted my original backup, and would like to revert completely back to stock, I would be very thankfull if you could help. But none the less you should do a complete backup, something like the roto or nandroid backups.
Try the OVERCOME rom, it's a great place to start as a noob to flashing, they have very detailed tutorials and the ROM is good.
EDIT: And the OVERCOME rom does work with the bell i9000 modem just fine for phone calls. Although the volume on the tab is not the greatest for a speakerphone.

theREDlegion said:
Careful what you flash though, if it's from XDA any ROM should do you okay but Samsung official ROMs may contain locked boot loaders. Catch up on some reading before doing anything.
Also i suggest that you do a complete backup of your tab before flashing anything else so that you could revert back in case of issues. Stock ROGERS firmware is hard to find. And if you do a backup I wouldn't mind a copy of it as long as you keep your personal information out. As a matter of fact, what i am after is a un-rooted fully stock ROGERS ROM. As i have deleted my original backup, and would like to revert completely back to stock, I would be very thankfull if you could help. But none the less you should do a complete backup, something like the roto or nandroid backups.
Try the OVERCOME rom, it's a great place to start as a noob to flashing, they have very detailed tutorials and the ROM is good.
EDIT: And the OVERCOME rom does work with the bell i9000 modem just fine for phone calls. Although the volume on the tab is not the greatest for a speakerphone.
Click to expand...
Click to collapse
darned,i rooted and unlocked it earlier this week.
i definitely would have done a stock backup for you.
can i unroot?i used oden and one of the cf rooting images.
unlocked using galaxy s unlock from market.
can i even revert back to stock?if so i will do a backup.
i have done nothing else to the stock rogers 2.3.3
i searched my hardrive but kies must delete the firmware after flashing.
jeff

kbg1 said:
darned,i rooted and unlocked it earlier this week.
i definitely would have done a stock backup for you.
can i unroot?i used oden and one of the cf rooting images.
unlocked using galaxy s unlock from market.
can i even revert back to stock?if so i will do a backup.
i have done nothing else to the stock rogers 2.3.3
i searched my hardrive but kies must delete the firmware after flashing.
jeff
Click to expand...
Click to collapse
Thanks for the offer. But no need to go through all of that unless you can un root with something like super one click (fast and easy, but I don't think that will work for you). If your tab is still under warranty you might want to learn how to root and unroot and restock and such (its all covered in the forums). Otherwise I don't want you playing with your tab and have a "bad" flash trying to help me out. Do read up in the dev section before you start flashing custom ROMs.
That said if you do feel comfortable flashing and decide to make a backup for yourself I definitely wouldn't mind a copy.
RED

hi
not scared of bricking the tab,i have been flashing samsungs for the last couple years,captivates etc.my last tab i did a supposed gps fix which ended in a bootloop.
i managed to get it back but with a modified 2.2 firmware.then kies would not let me upgrade to 2.3.3(unofficial firmware error)
my problems have always been actually returning to stock.
in recovery i have the orange clockwork recovery that has an option to do factory reset.will this take me back to unrooted and unlocked???
if so consider it done.
i will need direction to do a full backup after that.
jeff

Doing a hard reset will NOT un-root or re-lock your device (as far as I know). The factory reset will clear the data and cache and should not touch the system. You have to un-root your device using the method you rooted it with or something along those lines.
As far as a backup is concerned, creating a system backup has been covered in the forums before. There is plenty of detailed instructions on performing a backuphave a look at the Roto Backup method.

Just picked up a galaxy tab ( rogers )
gt-p1000r
firmware 2.2
all stock
no root
no unlock
I would like to "give back" something
for all the HELLp you guys have given via these forums
( i swear all my grey hair started once i dumped my blackberry and went samsung and found this site! )
Anyway
If you are still looking for the a copy of the STOCK system before I start to play...
I will try to figure out how to make a copy for you

[Q] Who can solve this problem?

Ok, this is a question or questions for all of you who have experience with flashing ROM's and all other stuff. i got I9000, and I saw a couple beautiful running new ROM's running around with all kind of stuff. I've flashed my phone before with ODIN and I know how this works...but...my phone was broken a few months ago ( motherboard was malfunctioned) and I needed my warranty back so I needed my stock ROM back on. My problem is this...I couldn't fint it anywhere!! You must be thinking by now:" Oh what a noob, stock firmwares are available online etc"..but mine is not...believe me! The team in T-Mobile Croatia, from I'm coming were gracious and they have replaced my motherboard under warranty because problem was within motherboard. But this is where problem starts... My stock ROM 2.3.3. Gingerbread PDA is available online (I9000BOJV9), PHONE also (I9000XXJVO), but there is no CSC (I9000GCROJV7). If I want to put on for example Ice Cream Sandwich, I need to have rooted phone to do that in CWM, and also to make backup of my stock ROM since there is no CSC stock available to download. And again I'm bumping against the wall. There is no suitable CF Root for BOJV9...That means no new ROM for me...Or...someone is smart out there...

Why do you need stock rom? install for example darky ressurection and make back up

martynas900 said:
Why do you need stock rom? install for example darky ressurection and make back up
Click to expand...
Click to collapse
I need stock ROM so I can flash my phone with it in case something goes south with phone and that I can bring back warranty on it...

You don't need root for working with Odin, only download mode (3 buttons combo). You can flash any other rom, CWM it and then flash ICS.
CSC is irrelevant. I don't use it at least 10-15 last flashes and everything works fine. I had to modify one for my SGT and I saw there is nothing important in it. But while I was still using it, I just copied it from /system/csc and after flash returned back using Root explorer or Es file manager. SIM (Simobil) is allso hard to find.
Now I see that ICS is not using CSC at all. Can't find it.
When you talk about GB (I9000BOJV9) PDA, is it really just PDA or is it full ROM? On samfirmware (don't know the new adress, don't use it any more since ICS) are usualy full roms, CSC included.
Like I wrote, copy /system/csc, store it somewhere safe, and if you need it again just copy it back.

Stock I9000T 2.1 update 1

Hi guys
As the title states I'm looking to update my wifes phone.
Firstly Im not sure if there is supposed to be a search for update feature like on my Sensation but i cant find one on the phone.
Its still on 2.1 update 1 Eclair DVJH3
Can someone be kind enough to tell me how/where i should look to update the firmware to something more current?
Do i have to root and installed one of the ROMs here or can i update to GB somehow?
Many thanks

This is stock for Puerto Rico, I9000TUBJV8 Android 2.3.3 -> http://www.hotfile.com/dl/146647677/7091d1f/I9000TUBJV8_I9000TUWAJV4_PCT.zip.html pass: samfirmware.com
I9000TUBJV6 Android 2.3.3 -> http://hotfile.com/dl/145761633/aaad3cc/I9000TUBJV6_UUBJV6_UBJV6.zip.html pass: samfirmware.com

Looks like you are on Telstra??
If you are still on the stock ROM and want to stay on stock ROM just use Samsung Kies. No rooting required and does not void warranty

Lexrsk said:
Looks like you are on Telstra??
If you are still on the stock ROM and want to stay on stock ROM just use Samsung Kies. No rooting required and does not void warranty
Click to expand...
Click to collapse
Hi Lexrsk
Yes its a Telstra branded phone.
It doesnt really matter if i put a custom ROM on it as work will give her a new phone if i stuff it up, no questions asked. Its just so slow at the moment.
She was set up on the cloud through work and one thing the cloud people asked her when trying to set up her email on the phone was "Is it a telstra phone?"
Im not sure if they use some sort of telstra program on the phone to assist with setting up email on her phone for use via the cloud. So i dont know if installing a new ROM could screw this up. Any ideas on this?
Thanks again

Hi Lex,
Just wanted to let you know I updated the phone using Kies. Downloads kept crashing but finally got it updated to Gingerbread from Eclair.
Phone was taking over 4mins to start up but now taking less than 50sec also working alot smoother.
Thanks again for the info. I had no idea about that software.

I've being in the same boat, but Kies tells me that my can't be updated the like the rest of the SGS's. Kies can be more of a pain at times.
Lexrsk said:
Looks like you are on Telstra??
If you are still on the stock ROM and want to stay on stock ROM just use Samsung Kies. No rooting required and does not void warranty
Click to expand...
Click to collapse

ptiggerdine said:
I've being in the same boat, but Kies tells me that my can't be updated the like the rest of the SGS's. Kies can be more of a pain at times.
Click to expand...
Click to collapse
Current Telstra branded firmware is
PDA:JV6/PHONE:JV4/CSC:JV3(TEL)
PDA: I9000TDVJV6
PHONE:I9000TDVJV4
CSC:I9000TTELJV3
And I have a Odin single file TAR if you require

Lexrsk said:
Current Telstra branded firmware is
PDA:JV6/PHONE:JV4/CSC:JV3(TEL)
PDA: I9000TDVJV6
PHONE:I9000TDVJV4
CSC:I9000TTELJV3
And I have a Odin single file TAR if you require
Click to expand...
Click to collapse
I would love it if I could have it please?

Current Telstra branded firmware is
PDA:JV6/PHONE:JV4/CSC:JV3(TEL)
PDA: I9000TDVJV6
PHONE:I9000TDVJV4
CSC:I9000TTELJV3
And I have a Odin single file TAR if you require
I'd like to second that! There doesnt appear to be any repository containnig the stock SGS telstra branded firmware (all links I have found have expired). I lost my backup with a hard drive corruption and have been looking for this for a while. Much appreciated if you would share

If you're upgrading from 2.1 to 2.3, a new bootloader has to be flashed as well

snipercision said:
I would love it if I could have it please?
Click to expand...
Click to collapse
ngodber said:
I'd like to second that!
Click to expand...
Click to collapse
Here you go 1 Telstra Froyo and 1 Telstra Gingerbread ROM.
Froyo Password: whirlpool Thanks for blacra for advising that a password is required to unzip (If this password does not work PM me and i will post a new zip)
GingerBread

[Q] Changing Network Locked Tab to Generic

I've got a Galaxy Tab from when it was release on Orange UK due to at the timew being Staff there and got it for a good deal.
The problem I have is that OUK Tabs only go as far as Froyo and now my apps are starting to not get updated due to the old OS.
So what I'd like to do is turn it into a gereric UK Tab so that I can install the standard Gingerbread firmware. At the moment, I don't want to start playing with different ROMs, just get it to a point where Kies will install the newer official firmware.
I've already got it SIM unlocked (on the off-chance I put a non-Orange SIM in it) but I'm not sure on the rest. I assume I need to root it before I do anything else.
This site is full of good stuff, unfortunately I'm not 100% certain I've understood what I need to do. Is there a step-by-step guide on how I get it turned into a generic model? I don't mind getting my hands dirtying, so am not asking for an app that will do all of it for me (unless of course there is one), I just need some instructions on how to do it.
Thanks in advance.

I would recommend you to use overcome method.
use Odin to flash official stock gingerbread JQ1.
Download GB stock safe v5 and the PDF guide.
jump to page 7 and flash according to the picture.
Sent from my GT-P1000 using xda app-developers app