Hi,
i recived one pcs of hd7 that show only sync screan (black screen with mobile and pc picture)..when i press power and volume down and camera show inter usb host mode..only when in black screen can detect with zune and show error that you cant sync your phone in this mode..
i maked the gold card with xtc clip and extract ruu exe file and put the nbh file in the sd ram directory and flash it with gold card( with special hd7 cable) phone flashed ok and show update successfuly but same condition ...phone on but freez on sync screen..
Related
I have been using the X1_HardSPL_Utility program. My phone has always had a good connection with Windows Mobile Device Center (ie, whenever I plug it into the USB port, it automatically syncs). I follow the steps in the program, but when it launches the bootloader program on my x1, it just stays at the "Loading..." screen. Then I get an error from the hardspl program that says something about my phone isn't connected to WMDC. After I disconnected and rebooted my phone, now my phone can no longer be detected by WMDC when I plug it into the USB port. How can I fix this problem so that I can Hard-SPL my phone? or are there alternate methods, such as through the Micro SD card?
i've made the same wrong thing like you ... 5 days to find it out.
1. dont have a rom on your storagecard (well not in the root)
2. put the hardspl.exe on the desktop of your pc (also dont have a rom on the desktop)
3. start the hardspl.exe on the desktop with the usb pluged in.
and it will work and you will feel like me "like a dump noob".
SO YES - YOU HAVE TO START THE X1_HARDSPL.EXE FROM YOUR BLOODY PC, LAPTOP, ETC AND NOT FROM YOUR X1
Bennieficial said:
I have been using the X1_HardSPL_Utility program. My phone has always had a good connection with Windows Mobile Device Center (ie, whenever I plug it into the USB port, it automatically syncs). I follow the steps in the program, but when it launches the bootloader program on my x1, it just stays at the "Loading..." screen. Then I get an error from the hardspl program that says something about my phone isn't connected to WMDC. After I disconnected and rebooted my phone, now my phone can no longer be detected by WMDC when I plug it into the USB port. How can I fix this problem so that I can Hard-SPL my phone? or are there alternate methods, such as through the Micro SD card?
Click to expand...
Click to collapse
I had the exact same problem.
You need to:
Disable your internet connection(wifi/lan)
disable your virus detection and windows firewall (and any standalone fire wall you have)
Remove you MicroSD card
run hardspl (it should now complete the operation)
And flash to what ever rom you like (using the SD card method)
Re-enable your firewall/virus detection/internet connection (In that order)
thanks!! i got it working just fine now thanks to both of you guy's help!
ok one more problem. I am not able to get my X1 synced with WMDC anymore, just as it was doing before my failed attempts at Hard-SPLing my phone. How do I fix this?
ok do you have now the hardspl on the phone?
IF yes - it will sync.
1. dont connect the phone
2. delete the "Partnerschaft" in english perhaps the team in WMC (means delete the phone in MWC).
3. connect the phone it will say a "oh new phone" - give him the sync possibilities and it's done.
took a bit time the first time...................just checked it right.........hm got also problems.....yesterday it worked because he copied the changes ........but today!
So my issues starts out like this...... I had an energy rom on my at&t tilt 2 from 3-15-10. I wanted to up date it so i ran task 29 http://forum.xda-developers.com/showthread.php?t=649191 which is found here my computer didn't want to open it at first (using windows 7 os with avg virus protector) i finally got it to open by going in and launching romupdateutility.exe.. (When i clicked on the custom ruu my computer did nothing even after right clicking and run as administrator) but i did get it to work.. No I'm having the same issue trying to put flash my new rom. When i click Rhodium_softwareUpgrade my computer does nothing. Is this a Windows 7 issue can someone please help my phone is now stuck on either the white at&t world phone screen or i can get to the bootloader screen but nothing after those. Help please, and thank you.
you can flash using ur storage card, just rename the nbh file to RHODIMG.NBH (if I'm not mistaken), copy it tp the root of the storage card and enter the boot loader.
hope it helps
with phone off hold volume down key while pressing the power key now you should be on tri-color screen (bootloader) & at the bottom of the screen it should say serial now plug your phone up via usb cable now at the bottom of your screen it should say usb
now on your computer right click on the custom ruu of whatever rom your using & run it as administrator & you should be able to flash with no problem
On russian forum's 4pda Mirial flashed his Dexp w5 with help qfil on android.
Don't working 2g/3g service.
Dexp firmware with windows and android firmware
instruction for installation android on windows phone:
1 a)You should download android firmware and unzip on c:\firmware.
b) installing QPST_2.7.422.
c) should mode cabel and normal usb cabels.
d) installed qcom drivers without driver signing
shift and reset and f7
2 Run C:\Program Files (x86)\Qualcomm\QPST\bin\QFIL.exe
Select Programmer Browse choose prog_emmc_firehose_8x10.mbn and Load XML choose rawprogram_unsparse and open patch0 .
3 Removed micro sd and sim card. and connection phone to pc with mode cabel micro usb, after connecton to pc with normal usb cabel. You should see new device QDloader 9008 in device Manager.
4 In qfil press download.
5. finish and on phone.
6. Restore your imei with WriteDualIMEI(W+G_eMMC), but it don't working normal(
I can flashed this phone on Windows or android forever alone now?
All other functions of the phone works fine, besides modem.
Anyway to do this on Lumia devices like Lumia 625?
Rivo17 said:
Anyway to do this on Lumia devices like Lumia 625?
Click to expand...
Click to collapse
unsophisticated
I would like a Custom Rom for Lumia Nokia and Microssoft Lumia
and respect to this is a great work.....
power on modem(2g) on dexp w5 on android:
1. restored imei with WriteDualIMEI(W+G_eMMC)
2. Restored modem with qfil on picture.
3 power off phone and closed windows, and remove usb cabel and reboot phone and restored your imei with WriteDualIMEI(W+G_eMMC)
Hi, i tried reseting windows. The process begin 5%, 10%... After long time a message un the blues screen " there had a problemas .. No changes were made".
Now the windows dont start, i can see the first menú, i can run android, but when i tried fin windows the screen is black. I push the screen and it react,
I plug a keyboard, i repeat the reseting procesos, and i get always the same message.
but windows dont start. Pleased any advice.
same story, reinstalled from flash drive using image from 4pda
recovery/reset moves files and zeros the partition. maybe windows messed up or one got impatient? no matter.
download necessary firmware from teclast's chinese or english websites, enter the ID of your model to get links.
the english site uses onedrive to host files and the chinese uses baidu (you'll need to register free overseas account, just google).
you can actually use any other already prepared (bootable) windows usb installation, this is just easier as a stock recovery will reprint your key.
format a usb drive as fat32, make sure volume label/name of the flash drive is "WINPE".
copy all files from the windows folder you just downloaded.
make sure battery is fully charged, you will need a usb hub too.
connect a keyboard and the drive you just formatted to the tablry using the microusb adapter.
turn on tablet and tap delete repeatedly. once in the bios navigate to "save & exit" tab - "boot override" menu - select your USB.
wait. if you see a blue screen just repeat, its normal. process is automatic and tablet will reboot once the images are written.
PC shows s6 folder but nothing in it to use side sync or frp unlock ?