Hello my camera of the hd7 just stop working, wen i press the camera button apears a black screen then automaticaly goes to start screen , any ideas how can i solve this problem ?
Thank you very much!
Sent from my HD7 T9292 using XDA Windows Phone 7 App
You can´t
I had the same problem.
http://www.youtube.com/watch?v=Cs_nJu7vciw
I simply returned it to my mobile provider and i´ve got a brand new one. No questions asked. Waranty is such a cool thing if you got one.
Normaly there is atleast 1 year waranty on that phone (EU-law)
Regards
Peter
Well i have no waranty i upgraded my phone to 32giga sd card any help is welcome!
Thank you
Sent from my HD7 T9292 using XDA Windows Phone 7 App
Downgrade it back to 8 Giga and just hope that the waranty is not expired.
Thats how i can help you. There is no other way.
Just hope they will not notice that you messed with the phone. If you did a nice clean job with the card excange than you possibly have good chances.
If you search on here there are directions regarding this problem. It involves removing the back cover around the camera and snapping the camera module back into place. Same thing happened to me and that fixed it for me.
Here you go.
Its got nothing to do with the rom or any update and software , i had the same problem n i did a lot of tests on the software but no luck !
then i opened the top back cover of the hd7 , removed battery , open top 6 screws , (no need to open the bottom cover and 2 screws with void label ) , gently remove the plastic cover , you will see the camera module there push it down to the board and youll hear a click , ITS OK NOW
Courtesy of Hamidnankali Thank him for figuring this problem out.
Thank you my friends. I will try that as soon as i get home ;-) and then i will report if that solved my problem!
Sent from my HD7 T9292 using XDA Windows Phone 7 App
Hello again! Great news my HD7 is working again as new! Many thanks , this forum is great!
Sent from my HD7 T9292 using XDA Windows Phone 7 App
Glad to hear that it solved your problem.
Thank you ;-)
Sent from my HD7 T9292 using XDA Windows Phone 7 App
Yes Indeed
Quint8 said:
Here you go.
Its got nothing to do with the rom or any update and software , i had the same problem n i did a lot of tests on the software but no luck !
then i opened the top back cover of the hd7 , removed battery , open top 6 screws , (no need to open the bottom cover and 2 screws with void label ) , gently remove the plastic cover , you will see the camera module there push it down to the board and youll hear a click , ITS OK NOW
Courtesy of Hamidnankali Thank him for figuring this problem out.
Click to expand...
Click to collapse
Can you please tell me the torx screw sizes? Seems to be two sizes of screw on the back side. And is there no need to remove the kick stand screws? Looks like it also need to be removed, for a total of 8 screws.
There is no two sizes of screw, its only one;-)
Sent from my HD7 T9292 using XDA Windows Phone 7 App
I had to remove the kick stand
Sent from my HD7 T9292 using XDA Windows Phone 7 App
Related
Hi friends,
My SGA getting old because of lot of times put onto bed and floor.So if i asked Samsung show room whole panel(case)its very costly.So im planned to change Back Panel only.Where can i get the panel alone.Pls suggest me.
Check e-bay, people who broke their screens or something else often buy new phones, proceeded by the selling of parts of their old phone, which would be the GT-S5830 in this case. Otherwise you can search online shops. Samsung will change the entire body and that'll be too costly.
Alternatively:
Get a (tight fitting) silicon cover. It protects your phone, solves the problem of having cracked/dirty/loose back panel and also is easily replaceable.
Happy to help.
Thank u fr ur reply friend...ll try in ebay...
Sent from my GT-S5830 using xda premium
ezhil.kpm said:
Thank u fr ur reply friend...ll try in ebay...
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Good luck!
hey
Me and my one just fallen down the stairs about 4 weeks ago. Since then I did not have the heart to send it to Avarto (german repair center). But I am even not quite sure if I need to sent it in.
So the following is damaged on my device:
-As you can see on photo 1 the left side is definitely crooked
-The display is coming out of the device a bit (Photo 2) I can press it it but it does come out again. Touch doesnt seem to be affected by this issue though...
That are the only things I could notice anything else works fine. But what in about 3 Months? may the display come off the panel or something? What do you think? Should I sent it in to Avarto? Some other users said that Avarto just sent their phone back after 1 week repaired, other said that their phone was completely damaged...
Thanks for help!
Robin
BTW: I can still use my original HTC Case
Picture One:
Picture Two:
Avarto said that I need to pay 29€ if they sent it back unrepaired.
That's awful, I would repair it myself since you won't get warranty for that anyway!
Sent from my HTC One using xda app-developers app
hey guys, so i have the LG Optimus 2X, P990-HN, i'm with Fido (doubt it matters) anyway, there was a large crack in my screen, and i just dealt with it for a long time, but eventually the glass FELL OUT, the rest of it worked, but i couldn't leave it, so i ordered a new Digitizer from DealExtreme.com and it was about $50 CAD, reviews tell me it worked, googled it nobody else had complaints, so i doubt it's a fake or anything, all the way from singapore, i put it in and i can see everything clearly through it, beautiful, but zero response from the touch screen. none at all in any area, what could it be? also, if i take the screen out to re-seat it do i need to apply heat and completely remove it, and if so will that make it garbage and need a new one? will the heat kill it? i'm quite upset because it costed 50 bucks and took a long time to get here, and i finally put it in and it doesn't work, all help appreciated!
Have you tried the service center ? One probable way to check if the new one really works is to connect the old one back and see if touch works.. You might have accidentally pulled out some other connection .. just my guess
Sent from my LG-P990
vkk178 said:
Have you tried the service center ? One probable way to check if the new one really works is to connect the old one back and see if touch works.. You might have accidentally pulled out some other connection .. just my guess
Sent from my LG-P990
Click to expand...
Click to collapse
if i take off thte new screen with a hair dryer, will that ruin the screen though?
Not sure about that . Is the new screen stuck on to the device like a sticker ? I recall seeing some YouTube videos on Optimus 2x surgery
Sent from my LG-P990
The digitizer , screen and the glass are usually a single unit .. yes any one of them is worn out , it can be replaced ... but u have to find d place where it s done ..
Sent from my GT-I9300 using xda app-developers app
skanda93 said:
The digitizer , screen and the glass are usually a single unit .. yes any one of them is worn out , it can be replaced ... but u have to find d place where it s done ..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
yes i ordered a digitizer though, replace it and it didnt work, what the hell could it be i just dont understand, and i can do it myself but i don't know the problem
I have done this twice with OK success. It is important to connect all electronics correctly - check YouTube for guides. But even if you did all correct be digitiser might be defect. Either you being it to service centre or redo digitiser install. Maybe, you can check before closing the phone, and if not working correctly check with your old digitiser. Heating and reheating should be no problem (although nothing is without risk). Good luck.
Sent from my LG-P990 using xda app-developers app
oneearleft said:
I have done this twice with OK success. It is important to connect all electronics correctly - check YouTube for guides. But even if you did all correct be digitiser might be defect. Either you being it to service centre or redo digitiser install. Maybe, you can check before closing the phone, and if not working correctly check with your old digitiser. Heating and reheating should be no problem (although nothing is without risk). Good luck.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
hey, thanks for helping me out. i think the digitizer MUST be defective, i took it apart and put the old SHATTERED one in, and it works FINE, aside from you know... being shattered. then i plugged the other NEW one in, and no response from the touchscreen. the ribbon wire looks to be fine, the connection to the logic board was fine, everything was hooked up right (or the other one wouldn't have worked right?) so if i cant SEE anything wrong with a digitizer, what could even be wrong with it, it MUST be defective, but what can really be defective about a digitizer? what can go wrong on something with so little to break...?
Don't know what is wrong, but it must have been defect before you got it. Try to return it to the seller/shop as soon as possible and get your money back.
Sent from my LG-P990 using xda app-developers app
watch the video
if this was useful please click in THANKS button !!! :good:
reserved
How does this work?
I thought solder flux was just to keep the surface clean while soldering. How does this 'repair' the solder on the pins?(assuming that's the problem)
I am going to try this very soon, the wifi on my hd7 broke 1,5years ago and I have never found a solution. I have sent it to HTC, but they just sent it back saying it wasn't broken.
You're better of just buying a broken hd7 or look on eBay and replace that board. My hd7 had the same problem. I ended up upgrading to a Nokia 521. My aunt gave me her hd7 that had a cracked screen, but I never switched the boards out yet.
Sent from my RM-917_nam_usa_100 using XDA Windows Phone 7 App
I have a problem with my phone . A technical one .
in portrait mode the touchscreen is not responsive at all but in landscape everything is just fine.
ofc , i tried other roms , wipped OS , reinstalled it , but it always happens .
it usually work for a day or two (in portrait , but it works like hell , extremely laggy , it double-triple taps when i touch the screen , it does not unlock and i need to take out the battery in order to use the phone again)
Now i am just using the phone with the qwerty out and that is an inconvenient sometimes ..
What could the problem be ( i must mention that i dropped the phone on the floor severel to a hundred times ) , i might think there is a problem with the phones sensor , maybe something at the cables which connect the front side of the phone with the back one or maybe the touchscreen ( but i dont think it is its fault )
some advices b4 im take it to a mobile phone service ?
No advices such as "contact verizon bla bla bla"i am from romania .
Your ribbon cable may have a tear in it. Sorry.
Sent from my Droid using xda app-developers app
MrObvious said:
Your ribbon cable may have a tear in it. Sorry.
Sent from my Droid using xda app-developers app
Click to expand...
Click to collapse
Finally ! Can you help me with something ? Can you tell me what do i need to buy in order to replace it ? The guys from the services in Romania told me in romanian what it is broken but i have no idea in english...
Maybe this thing ?
http://www.etradesupply.com/oem-motorola-motoroi-x-digitizer-touch-screen-without-adhesive.html
Honestly you would be best taking it apart yourself to see what part it is.
Sent from my Nexus S using xda app-developers app
i can not do that , i need special tools which cost money . i will try my luck .
Dorin21 said:
i can not do that , i need special tools which cost money . i will try my luck .
Click to expand...
Click to collapse
Should just be a standard Torx screwdriver set.
MrObvious said:
Should just be a standard Torx screwdriver set.
Click to expand...
Click to collapse
Yes, but to replace the digitizer on the Droid3 there is one especially small torx driver required that most kits do not include. I think it is a T3, maybe a T2.5, but in any case I had to look hard to find one online.
Repairing the Droid3 at this level is quite difficult, even with the correct tools, especially if there has been any wear or corrosion of those tiny torx screw heads. They can easily be ruined rather than backing out.
Best left to professionals maybe, and then you have to wonder if it is worth the time and trouble for a Droid3 ?
Sent from my Nexus 7 using Tapatalk 4
I succeded to fix my droid 3, hard work, costed my about 30 usd aaand i gave it to my mom to upgrade to an s2. Good bye old friend
Sent from my GT-I9100 using xda app-developers app