I have a Sprint Tab running stock Tom and OC kernel. After using Chainfire 3D and using the install driver using CWM option, I no longer have a modem working. Used Odin and EA24 bin to revert to stock and it hangs on modem.bin. if I use Heimdell same issue at modem.bin. Using Heimdell and just flashing zimage to recovery and ????? Brain fart...forgot other spot...gives me a complete flash but still no modem(3g). Also noticed airplane mode is also checked but unchecking doesn't help. Baseband and hardware say unknown...how can I wipe this sucker COMPLETELY and start fresh...something is wrong...thanks
Sent from my Liberty using XDA App
Related
Odin gets stuck when trying to flash JV1....
Gladly I can still use download mode so I'm able to restore my galaxy s....
But I really want to install gingerbread... any ideas on how to install it?
I uploaded an image of the part where the flashing gets stuck... in the image iim using pit 512 but I have also tried with 803 and I get the same result... after odin fails I can disconnect my galaxy s... and boot into download mode again
Have you tried to download odin 1.3 maybe this one is corrupted. Try to restart pc, run odin, put all files, connect the device.
Sent from my GT-I9000 using XDA App
I 've had the same problem. Flash with Odin 1.3 should work.
I tried with odin 1.3 too...
And it didn't work either =/
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
renatofontes said:
I tried with odin 1.3 too...
And it didn't work either =/
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
themate1987 said:
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i am on darkeys 9.3 now how can i flash ultibread 1.4 pl guide me step by step
I will PM when i get home
naishadh said:
i am on darkeys 9.3 now how can i flash ultibread 1.4 pl guide me step by step
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
themate1987 said:
I was also stuck and i flashed darky's odin rom. Than i have flashed stock gingerbread, flashed 2.2 speedmod kernel and finally i have flashed ultibread via cwm.......so try flashing other rom
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Sadly that didn't work either... D:
I'm downloading the JV1 rom directly from samfirmware and if ir doesn't work again I'll try flashing from another computer =)
Well now that JVK has been released I tried flashing that too...
And I can't
It's really weird the bootloaders just don't seem to want to get into my phone x3
I tried using odin and heimdall using the version with the safe bootloaders and it never flashed completely.
Gladly my phone hasn't been bricked... maybe it's because odin and heimdall don't ever get close to flashing the bootloader?
Anyway... I have a mexican galaxy s... I think the name of the model is I9000T
Can someone help?
I just get replacement phone from Samsung
FW : 2.2
Baseband I897UCKB2
Build # : froyo.uckb2
I use Heimdall to restore back, noticed that is ROOTED e
install ROM MANAGER, and flush it with samsung captivate.
Now when I do the recovery and choose reinstall, to get to cwm menu, it is failing with some kind of signature error message.
please help
Easiest way is get sgs kernel flasher from market. Download a kernel with it baked in and flash it via kernel flasher. I use one of existz's kernel. Most modified kernels fix the 3e error.
Sent from my SAMSUNG-SGH-I897 using XDA App
thanks, i tried to flush samurai using sgs kernal flasher, but it ws stuck at some att and multicolor screen.
so back to hemmi again.
any more help?
Mmm do you have cwm?
Sent from my SGH-I897 using xda premium
Im lost as to what you are trying to do then.
Sent from my SAMSUNG-SGH-I897 using XDA App
i did install busybox and rom manager and flush it but same issue
all I want is to install custom rom.
can i use any type of odin or have to use hemmi?
So...what are you needing help with. The 3e recovery?
Sent from my SAMSUNG-SGH-I897 using XDA App
maxximboy1 said:
thanks, i tried to flush samurai using sgs kernal flasher, but it ws stuck at some att and multicolor screen.
so back to hemmi again.
any more help?
Click to expand...
Click to collapse
that screen is becuase that is a gingerbread kernel, so gingerbread bootloaders are required for cwm to function.
either use heimdall to flash gingerbread boots, or flash a froyo kernel like speedmod...
There's a problem that I've came on while downgrading to stock 2.3.3 from MIUI 1.11.11 2.3.7 with CWM. I've wiped partillion chache and dalvik chache, installed rom XWJVH (it went correctly) rebooted, it stuck on booting screen. Restarted into download mode tried to install another kernel (cf-root 3.2 because it worked in past) and got fail in Odin.
Is my phone fully bricked? 'Cuz I can't get into CWM anymore.
HELP PLEASE!!!!!!!!
If u can get into download mode, you will be fine. Just flash a full stock rom with odin.
If u still have no joy, flash eclair jm9 (from samfirmware.com), it will resurrect most fxxk ups.
Sent from my GT-I9000 using xda premium
woolf clubs said:
If u can get into download mode, you will be fine. Just flash a full stock rom with odin.
If u still have no joy, flash eclair jm9 (from samfirmware.com), it will resurrect most fxxk ups.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Ok, let's try but on other combinations Odin said connecting after starting a process (tried 1.3, 1.7, 1.8 versions to flash 2.3.3 and 2.3.5, none worked) but whar if it will not work? What next, because on recovery it gives "black screen of death" as said in this topic:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Series
But at least download mode works.
P.S. I get modem and code files in jm9 download, which to put in pda? csc?
Is odin detecting your phone, yellow light?
Sent from my GT-I9000 using xda premium
yes it detected.
AND YES its going now, I've put pit file in and it is working now!!!!!!!
PASSED in odin, booting up........ boot logo......... please boot up!
something wrong, boot logo loop.
flashed cf-root 4.3 and I hope for the best.
P.S. nooooooooo, boot loop again
P.P.S. thank you anyway, at least boot loop is easier to work on.
Have you tried jm9 yet?
Sent from my GT-I9000 using xda premium
Taxiozaurus said:
flashed cf-root 4.3 and I hope for the best.
P.S. nooooooooo, boot loop again
P.P.S. thank you anyway, at least boot loop is easier to work on.
Click to expand...
Click to collapse
I am a little bit confused, and you too...
To bring back to life your phone you have flashed jm9, eclaire....ok.
But why have you flashed a CF-root 4.3?
It's for JVS gingerbread rom.
Edit: If your 3 keys combo still works, try to flash a stock 2.3.x
If the problems happen while using MIUI, better you select eclair rom first. Then you can upgrade to GB that have bootloader.
From MIUI directly to gingerbread will have fuzzy screen problem.
Hey Guys,
I flashed a Tar file ROM using Mobile Odin and enabled Everroot, CWM, Super User. Everything went fine and the install went great. For some reason my keyboard wasn't functioning well (showing 'null') and I saw in the forums that flashing the CSC file from Mobile Odin will fix that issue and it did fix it.
The problem now is, every time I boot the phone in recovery mode..It always says updating CSC successful and It doesn't show other CWM options which I used to have in cf-root like Backup, Restore etc. Anyway to fix this? Do I have to install a different version of CWM?
Yes. Find cwm for your kernel. Then use it with already rooted option
Sent from my GT-N7000 using XDA App
you need to use a cfroot kernel or a custom kernel that supports CWM
I installed CM10 on my P7300 about two month ago and it was working great until last week. After about 10 seconds after booting into CM, the tablet enters a bootloop. I wiped everything using CWM and installed CM from zip file again but it didn't fix.
I prefer to revert to stock rom but I kinda got lost in Development section of the forum.
What should I do?
Flash the stock rom using Odin. You can get the rom from sammobile.com. you'll download a zip file. Use 7-zip to extract the .tar.md5 file from it. Use that file in odin. Put it in PDA in odin. Only have auto-reboot and f.rest checked. Flash it. That will return you to stock. You might have to do a factory reset on the recovery afterwards if you get into a boot loop
Back everything up before you start. Pictures, music, etc should not be touched during this process. But all your apps and settings will be lost.
Good luck
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Find your preferred stock ROM at samfirmware (requires easy registration) and flash with Odin (1.85) should do the trick.
Sent from my GT-P7310 using xda app-developers app
It did the trick
Good.