Related
I have a T-Mobile Dell Streak 7 4G version running stock froyo. I just got it and never rooted it or did any modifications. I was trying to update to HC. I downloaded and renamed the file according to instructions per TheManii in his guide. I then tried to boot into the android system recovery utility by pressing and holding the power button + volume up button. I instantly got stuck on the screen you see below. I don't know how to get out of it and don't know what to do. Any help on this is greatly appreciated. Thanks in advance.
androidowns said:
I have a T-Mobile Dell Streak 7 4G version running stock froyo. I just got it and never rooted it or did any modifications. I was trying to update to HC. I downloaded and renamed the file according to instructions per TheManii in his guide. I then tried to boot into the android system recovery utility by pressing and holding the power button + volume up button. I instantly got stuck on the screen you see below. I don't know how to get out of it and don't know what to do. Any help on this is greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
Have you tried to reset the DS7 with the pin hole reset button? Are you booting up with USB connected to your computer? If so, you to unplug the USB cable.
Im good now, thanks. Im trying to get HC on my streak but Im failing hard. I followed the guide.. Someone wanna dive in and help me out?
androidowns said:
Im good now, thanks. Im trying to get HC on my streak but Im failing hard. I followed the guide.. Someone wanna dive in and help me out?
Click to expand...
Click to collapse
You boot into recovery by pressing the Volume + button and the Power button simultaneously... to get into that fastboot mode you got "stuck" in you had to have pressed the Volume - button with the power button
Once in recovery you select option 2 I believe to update, the Streak will guide you through the rest
cdzo72 said:
You boot into recovery by pressing the Volume + button and the Power button simultaneously... to get into that fastboot mode you got "stuck" in you had to have pressed the Volume - button with the power button
Once in recovery you select option 2 I believe to update, the Streak will guide you through the rest
Click to expand...
Click to collapse
I'm not sure he got CWM onto his streak.
Ok, now im getting the fota model name mismatch message. HC didnt install. Can you add the steps for the work around this message Im getting. Thanks again, I really appreciate it.
androidowns said:
I have a T-Mobile Dell Streak 7 4G version running stock froyo. I just got it and never rooted it or did any modifications. I was trying to update to HC. I downloaded and renamed the file according to instructions per TheManii in his guide. I then tried to boot into the android system recovery utility by pressing and holding the power button + volume up button. I instantly got stuck on the screen you see below. I don't know how to get out of it and don't know what to do. Any help on this is greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
This is your problem.
You need to root it. Install Clockwork, reboot into recovery mode, and THEN install the package.
giveen said:
This is your problem.
You need to root it. Install Clockwork, reboot into recovery mode, and THEN install the package.
Click to expand...
Click to collapse
I thought CWM was different than rooting a device...
It is, unless you're installing cwm from rom manager (which i dont believe is recommended) you do not need to root as the normal method of installing cwm here would be via fastboot
TheManii said:
It is, unless you're installing cwm from rom manager (which i dont believe is recommended) you do not need to root as the normal method of installing cwm here would be via fastboot
Click to expand...
Click to collapse
OK, so fastboot flashing implies rooting? EDIT: Nevermind, I just digested the meaning of your post...
Download. Gingerbreak here http://db.tt/1fcrIUqS use it to get root then download. Rom manager. From the market and use it to flash clockwork recovery.
Ok, thanks for the help. I am now rooted. I am stuck on trying to update to HC. I followed the instructions per http://forum.xda-developers.com/showthread.php?t=1286295 but when I get to 'Software upgrade via Update.pkg on SD Card' I get stuck (refer to image below). What am I doing wrong? Any help is appreciated as always. Thanks!
It's named incorrectly, either rename it to update.zip or manually navigate to it
I renamed it to update.zip and still doesn't work. I don't know what's goin on lol.. I'm rooted and I have the file ready just sitting there. Someone help me install HC.
Scroll down to where it says choose zip from sd card, and hit power to srlect it. Choose the hc update.zip u wanna flash and voila!
Just a note,by t I know some people where having problems getting into fastboot and recovery. All you have to do is reset with the pinhole reset and everything is fine also if the battery is to low just plug it in to charger or it will just blink the led and not do anything...
Sent from my Dell Streak 7 w/HC using xda premium
I have a problem ...
I installed gingerbreak, I root the s7.
After I installed ClockworkMod - rom manager, but the tab does not restart ClockworkMod, but in the recovery of dell.
Why?
---------- Post added at 12:51 PM ---------- Previous post was at 12:12 PM ----------
ok! solved!
I installed honeycomb!
I followed method 2 (thanks a lot manii)
I have a tmobile 4g s7 ... I downloaded update for us ... 4g
it works for now ...
I did it all with root permissions and ClockworkMod
androidowns said:
I renamed it to update.zip and still doesn't work. I don't know what's goin on lol.. I'm rooted and I have the file ready just sitting there. Someone help me install HC.
Click to expand...
Click to collapse
I made a very easy procedure following the "http://forum.xda-developers.com/showthread.php?t=1286295"
Recovery.img updated the topic mentioned and then did the update for pkg.
I found this procedure "update recovery.img" on the site streaksmart.com
update recovery.img
Download the Android SDK and extract it on your C: drive. I renamed the folder "Android" for simplicity and moved it to the root of the drive, but you can do whatever you want.
Turn it back on by holding the volume down (-) and the power button at the same time to enter fastboot mode.
Connect the Streak 7 to your computer.
Open a command prompt (in Windows, press Start > All Programs > Accessories > Command Prompt) and navigate to your Android SDK/tools folder. For me, it's in C:\Android\tools so I type cd c:\android\tools in the command prompt.
Then type "fastboot flash recovery recovery.img" and press Enter.
was what I used to update the recovery, after using the upgraded pkg topic mentioned above.
Thanks to everyone who helped. DS7 3.2 ftw!!
I looked everywhere and tried everything but i have not find the solution.
I bought this Dell Streak 7" at the Discount Wed site used.
And it already had the Rom manager Pre Installed, Superuser, ect.
The Weird thing is that i tried to flash a recovery within the Rom Manager and when i wanted to Boot onto recovery theres was none.
I need some one please that had the same issue like me to help to this process of flashing a recovery.
chipis said:
I looked everywhere and tried everything but i have not find the solution.
I bought this Dell Streak 7" at the Discount Wed site used.
And it already had the Rom manager Pre Installed, Superuser, ect.
The Weird thing is that i tried to flash a recovery within the Rom Manager and when i wanted to Boot onto recovery theres was none.
I need some one please that had the same issue like me to help to this process of flashing a recovery.
Click to expand...
Click to collapse
Rom manager cannot boot your device into recovery( at least not for me)
you can boot into recovery by powering off then press both: volume up and power. you will see a screen with choices you will need to choose number 2 and it should boot into recovery.
I would suggest that you start over completely which will wipe the whole system. And use a rooted stock or custom rom from this forum. There is substantial amount of information on doing this in this forum and you will have to read, research before doing anything.
You can achieve this by reading the second post in general forum and skip to post 10.
chipis said:
I looked everywhere and tried everything but i have not find the solution.
I bought this Dell Streak 7" at the Discount Wed site used.
And it already had the Rom manager Pre Installed, Superuser, ect.
The Weird thing is that i tried to flash a recovery within the Rom Manager and when i wanted to Boot onto recovery theres was none.
I need some one please that had the same issue like me to help to this process of flashing a recovery.
Click to expand...
Click to collapse
Wish you would do a search here in the forum
If you did then you'd find a custom Clockwork Mod for your Streak but you're gonna have to not be lazy and learn to flash it with fastboot commands
And.even then you can't boot directly into Clockwork Mod. You have to go through stock recovery first
You have some reading to do
Sent from my cm_tenderloin using Tapatalk 2
cdzo72 said:
Wish you would do a search here in the forum
If you did then you'd find a custom Clockwork Mod for your Streak but you're gonna have to not be lazy and learn to flash it with fastboot commands
And.even then you can't boot directly into Clockwork Mod. You have to go through stock recovery first
You have some reading to do
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Well thanks for the help, but somehow it dont boot into stock recovery
and now it has bootloops for trying many things and dont work for me.
Bad thing i not good on commands and dont know how to flash it that way.
datfat said:
Rom manager cannot boot your device into recovery( at least not for me)
you can boot into recovery by powering off then press both: volume up and power. you will see a screen with choices you will need to choose number 2 and it should boot into recovery.
I would suggest that you start over completely which will wipe the whole system. And use a rooted stock or custom rom from this forum. There is substantial amount of information on doing this in this forum and you will have to read, research before doing anything.
You can achieve this by reading the second post in general forum and skip to post 10.
Click to expand...
Click to collapse
Thanks Your Help Is very appreciated, I just did that and dont do nothing just reboots normally. No Stock Recovery. OR iam dong it wrong
I press Vol + and then power and goes through the dell light color ect.
Well through all the normal reboot
Here another thing that i cant used the devised because now it has bootloops, I tried SaveMode and the device runs great that way, but when i go to settings to Factory restore it reboots but then again with the bootloops.
So in another words i have to flash a recovery and another Rom or theres another easy way besides Commands?
chipis said:
Thanks Your Help Is very appreciated, I just did that and dont do nothing just reboots normally. No Stock Recovery. OR iam dong it wrong
I press Vol + and then power and goes through the dell light color ect.
Well through all the normal reboot
Here another thing that i cant used the devised because now it has bootloops, I tried SaveMode and the device runs great that way, but when i go to settings to Factory restore it reboots but then again with the bootloops.
So in another words i have to flash a recovery and another Rom or theres another easy way besides Commands?
Click to expand...
Click to collapse
Well I have some possibly bad news for you....
Unfortunately most that have tried to do a Factory Reset from within Android end up with their Streak 7 in what is called Read Only mode for which the only fix is sending it to Dell.
To boot recovery you have to hold BOTH the Volume + and Power buttons at the same time until its in recovery.
From stock recovery you then choose factory reset. I would recommend you do nothing more than that until you learn fastboot and adb commands. Like I told you earlier, you have a lot of reading to do
Sent from my cm_tenderloin using Tapatalk 2
Ok Finally, at least got to Flash A Recovery but When i go press Vol + and power at the same time it does not go thru the recovery mode.
I have to flash a stock recovery ? If so can some one provide me the link that great.
I tried the APX fastboot and the Tablet recognize the command thru command promt.
chipis said:
Ok Finally, at least got to Flash A Recovery but When i go press Vol + and power at the same time it does not go thru the recovery mode.
I have to flash a stock recovery ? If so can some one provide me the link that great.
I tried the APX fastboot and the Tablet recognize the command thru command promt.
Click to expand...
Click to collapse
First, APX and Fastboot are two completely separate systems.
Second, Press Volume+ and Power, then chose the section option there that says "Install a package" that should take you into recovery.
giveen said:
First, APX and Fastboot are two completely separate systems.
Second, Press Volume+ and Power, then chose the section option there that says "Install a package" that should take you into recovery.
Click to expand...
Click to collapse
Ok this what i did, I installed the drivers. and ones it installed i looked at the Device Manager and it saids ADB Thats when the Tablet its on Fastboot ( Where the Red letters and white )
Then I went to the Command Manager and This Type in "fastboot flash recovery NAME-OF-RECOVERY-IMAGE.img
And The Command Promt actually Flashes Sucessfully.
Something its wrong, or i not pressing the right buttons to getting to Recovery.
Vol + and power then The Dell Logo flashes follow by the Dell Animation With Kind Blue Flash But it goes straight to normal reboot.
chipis said:
Ok this what i did, I installed the drivers. and ones it installed i looked at the Device Manager and it saids ADB Thats when the Tablet its on Fastboot ( Where the Red letters and white )
Then I went to the Command Manager and This Type in "fastboot flash recovery NAME-OF-RECOVERY-IMAGE.img
And The Command Promt actually Flashes Sucessfully.
Something its wrong, or i not pressing the right buttons to getting to Recovery.
Vol + and power then The Dell Logo flashes follow by the Dell Animation With Kind Blue Flash But it goes straight to normal reboot.
Click to expand...
Click to collapse
You have to hold the buttons until it actually boots into recovery
Sent from my cm_tenderloin using Tapatalk 2
chipis said:
Ok this what i did, I installed the drivers. and ones it installed i looked at the Device Manager and it saids ADB Thats when the Tablet its on Fastboot ( Where the Red letters and white )
Then I went to the Command Manager and This Type in "fastboot flash recovery NAME-OF-RECOVERY-IMAGE.img
And The Command Promt actually Flashes Sucessfully.
Something its wrong, or i not pressing the right buttons to getting to Recovery.
Vol + and power then The Dell Logo flashes follow by the Dell Animation With Kind Blue Flash But it goes straight to normal reboot.
Click to expand...
Click to collapse
For fastboot , press and HOLD (Volume Down) and (Power), press and hold till its at a black screen with red text.
Then in device manager install the Dell Streak 7 Bootloader (we call them fastboot) drivers.
Command will NOT flash, and be done
It will say something like this
"reading recovery.....OKAY
writing recovery.....OKAY
completed in xxxx seconds"
giveen said:
For fastboot , press and HOLD (Volume Down) and (Power), press and hold till its at a black screen with red text.
Then in device manager install the Dell Streak 7 Bootloader (we call them fastboot) drivers.
Command will NOT flash, and be done
It will say something like this
"reading recovery.....OKAY
writing recovery.....OKAY
completed in xxxx seconds"
Click to expand...
Click to collapse
ok Thats exactly what i have on my computer.
So what the best way, because i cant boot into recovery mode it goes straight to the normal boot, some how its not installed the recovery mode i guess.?
chipis said:
ok Thats exactly what i have on my computer.
So what the best way, because i cant boot into recovery mode it goes straight to the normal boot, some how its not installed the recovery mode i guess.?
Click to expand...
Click to collapse
ok how do i installed recovery. I follow the step but iam kind of noob on this.?
Having trouble doing anything with my nook hd+, i have it running on cm 10.2. the problem is that after i tried updating twrp from 2.6.xx to 2.7 with the flashify app it i rebooted it to try it out but instead of booting it got stuck in a boot loop. it powers on for about 3 secs and cuts back off and continues doing this until i hold down the power button and turn it off. i have tried everything i could think of but nothing works!! if anyone could help that would be great. ps im new to most of this
parkerchad82 said:
Having trouble doing anything with my nook hd+, i have it running on cm 10.2. the problem is that after i tried updating twrp from 2.6.xx to 2.7 with the flashify app it i rebooted it to try it out but instead of booting it got stuck in a boot loop. it powers on for about 3 secs and cuts back off and continues doing this until i hold down the power button and turn it off. i have tried everything i could think of but nothing works!! if anyone could help that would be great. ps im new to most of this
Click to expand...
Click to collapse
Holding power + home doesn't bring up recovery either?
You'd then need to adb flash the recovery or make an sdcard bootable and put the sdcard recovery on there which would then be started by the device and then you can fix from there. Go with the one you have already available first.
sandsofmyst said:
Holding power + home doesn't bring up recovery either?
You'd then need to adb flash the recovery or make an sdcard bootable and put the sdcard recovery on there which would then be started by the device and then you can fix from there. Go with the one you have already available first.
Click to expand...
Click to collapse
no ive tried holding power + home but all it does is turn off the nook and i have tried using a bootable sd card but the nook doesnt seem to want to boot up on that either. As of using adb i have tried to use it but it will not connect to the device for me to flash anything to it. It may be to my lack of experience using adb or fastboot.
parkerchad82 said:
no ive tried holding power + home but all it does is turn off the nook...
Click to expand...
Click to collapse
You are holding power too long. Hold power and n together for a few seconds releasing power first followed by releasing n. It should boot to recovery (either stock or CWM).
Sent from my SCH-i705 using Tapatalk
leapinlar said:
You are holding power too long. Hold power and n together for a few seconds releasing power first followed by releasing n. It should boot to recovery (either stock or CWM).
Sent from my SCH-i705 using Tapatalk
Click to expand...
Click to collapse
i have tried all sorts of button combinations including like you just said. the nook powers on for maybe 3 secs shows the word "nook" and cuts back off not enough time to do anything with
parkerchad82 said:
i have tried all sorts of button combinations including like you just said. the nook powers on for maybe 3 secs shows the word "nook" and cuts back off not enough time to do anything with
Click to expand...
Click to collapse
Your emmc is messed up. I suggest you go to my HD/HD+ CWM thread and make a new bootable CWM SD per item 1a and then use that to install a plain stock zip from item 6. That should repair the files on emmc and you can start over with CM11.
Sent from my BN NookHD+ using XDA Premium HD app
If you mess up the internal emmc recovery, your nook will behave exactly as described.
(trust me, I've been there).
The cure is to (re)flash a working recovery from a sdcard recovery.
Some people complain that it's hard to get their device to boot from sdcard.
Sometimes it helps to plug in your nook to entice it to boot from sd.
After downloading CM11 and GApps, I put it in my SD card and went into my recovery cwm9 by using an app. I got in and tried to flash my zips but I couldn't find them. Before I actually tried to flash them I did this first:
Wipe cache ( only required on first installation )
Wipe Dalcik cache ( only required on first installation )
Format /system and optionally /data ( Only necessary if coming from stock or a different ROM )
So when I rebooted I was greeted by getting stuck at the T-mobile boot splash.
I don't know how to get into recovery manually. I can't try to use download mode because I used fastboot. When I get into fastboot I tried using ADB to boot into recovery but device is not found when I'm in fastboot.
Please help me, I literally just got this phone and wanted to flash a custom rom because the LG stock is disgusting.
nemesis101x said:
After downloading CM11 and GApps, I put it in my SD card and went into my recovery cwm9 by using an app. I got in and tried to flash my zips but I couldn't find them. Before I actually tried to flash them I did this first:
Wipe cache ( only required on first installation )
Wipe Dalcik cache ( only required on first installation )
Format /system and optionally /data ( Only necessary if coming from stock or a different ROM )
So when I rebooted I was greeted by getting stuck at the T-mobile boot splash.
I don't know how to get into recovery manually. I can't try to use download mode because I used fastboot. When I get into fastboot I tried using ADB to boot into recovery but device is not found when I'm in fastboot.
Please help me, I literally just got this phone and wanted to flash a custom rom because the LG stock is disgusting.
Click to expand...
Click to collapse
See FAQ thread for getting into recovery.
[SIZE=+1]Q14: I've flashed a custom recovery but what are the key combos to get there?[/SIZE]
Power off the device
Press and hold Power + Volume down
When the LG logo appears on the screen, quickly release the Power button, still holding the Volume down button, and press and hold Power again until the "Factory Reset" screen appears. Don't worry, this won't reset the device.
Use the volume keys to navigate up and down and Power to select. Scroll down and select "Yes" and repeat once more. It may take up to 10 seconds for the device to boot to recovery.
I've now gotten into the recovery and installed both cyanogenmod and GApps. I've actually had to change the rom found here:
http://forum.xda-developers.com/lg-l90/development/rom-cyanogenmod-11-lg-l90-lg-d415-t2871371
I've had to change the updater script that contained "w7" to "w7ds" because it said my device wasn't w7 and that it was w7ds.
I've rebooted and now it's just stuck on the cyanogenmod boot screen.
What do?
nemesis101x said:
I've now gotten into the recovery and installed both cyanogenmod and GApps. I've actually had to change the rom found here:
http://forum.xda-developers.com/lg-l90/development/rom-cyanogenmod-11-lg-l90-lg-d415-t2871371
I've had to change the updater script that contained "w7" to "w7ds" because it said my device wasn't w7 and that it was w7ds.
I've rebooted and now it's just stuck on the cyanogenmod boot screen.
What do?
Click to expand...
Click to collapse
You've got an older recovery it seems. Download Philz-Touch from my thread, the link you posted, or get TWRP from this thread
Since you're having booting issues, use fastboot to flash the recovery.
Thing is when I'm in fastboot, ADB won't detect my device. I've only gotten it to detect my device once and that's when I was unlocking my bootloader. I don't know how to do it again.
So what do I do? BTW, thanks for helping me.
Edit: I formatted everything again and tried to reinstall the cyanogenmod and GApps. Seems like I just had to wait for the boot screen.
nemesis101x said:
Thing is when I'm in fastboot, ADB won't detect my device. I've only gotten it to detect my device once and that's when I was unlocking my bootloader. I don't know how to do it again.
So what do I do? BTW, thanks for helping me.
Click to expand...
Click to collapse
Put device in fastboot mode. ADB can't detect the device when it's in fastboot mode.
Type:
Code:
fastboot devices
You should see a listing similar to "adb devices" output.
Copy recovery image to the same folder fastboot is in. Then type:
Code:
fastboot flash recovery recovery.img
or
Code:
fastboot boot recovery.img
First one will only write the recovery image to the device. The second on will write the image to the device and should then boot the device to the recovery.
EDIT:
Yes, the first boot takes a couple minutes.
Seems I just had to wait for bootscreen.
How do I turn data on and off?
nemesis101x said:
Seems I just had to wait for bootscreen.
How do I turn data on and off?
Click to expand...
Click to collapse
easiest way to explain. Go to Settings and toggle Mobile Networks off/on.
There are several ways. I'm guessing you're new to CyanogenMod ROMs?
shinobisoft said:
easiest way to explain. Go to Settings and toggle Mobile Networks off/on.
Click to expand...
Click to collapse
Well, yeah, but a faster way. Like in LG in the notification bar there was a button that would turn data on and off. Does cyanogenmod have anything like that similarly?
nemesis101x said:
Well, yeah, but a faster way. Like in LG in the notification bar there was a button that would turn data on and off. Does cyanogenmod have anything like that similarly?
Click to expand...
Click to collapse
Quick Tiles. Pull down statusbar and press upper right corner image. There should be a tile already there for data
Sent from my LG-D415 using Tapatalk
shinobisoft said:
Quick Tiles. Pull down statusbar and press upper right corner image. There should be a tile already there for data
Sent from my LG-D415 using Tapatalk
Click to expand...
Click to collapse
Yeah, I got it.
Thank you for all your help!
I use this guide: http://forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690
But I cant find recovery.img on my phone and I use another recovery. Now I want to go in Recovery Mode but I have only LG logo and in left up corner is:
[490] fastboot_int()
[590] USB init ept @ 0xffdc000
[610] udc_start()
Besides when I restart phone, my phone turn on normally. I think that the fault of a bad file recovery.img. Someone can send me recovery.img on D-405N? Or help me with this problem? Best Regard, Damian.
damianww said:
Besides when I restart phone, my phone turn on normally. I think that the fault of a bad file recovery.img. Someone can send me recovery.img on D-405N? Or help me with this problem? Best Regard, Damian.
Click to expand...
Click to collapse
here is the thread with latest twrp http://forum.xda-developers.com/devdb/project/?id=6543#downloads
olinojephanko said:
here is the thread with latest twrp http://forum.xda-developers.com/devdb/project/?id=6543#downloads
Click to expand...
Click to collapse
But which is on my D-405N?
damianww said:
But which is on my D-405N?
Click to expand...
Click to collapse
all of them, its for all lg l90 D4xx devices.
I recommend using this one TWRP_2.8.4.0_160115_L90.img
Ok It's done, thank you. But i have another problem... I put on my SD card ROM but Team Win Recovery Procjet doesn't see zip file. Why? SD card must be in Ext2?
sd card should be in fat32
make sure you are looking into right directory, in twrp you can choose between internal and external sdcard. if you cant see it on external memory try putting it into internal.
I have another problem... -.- I install ROM but when i turn on phone is LG logo, T-mobile logo and I wait and nothing. Someone can help me?!
which rom did you install?
maybe try to do full wipe and reinstall it
olinojephanko said:
which rom did you install?
maybe try to do full wipe and reinstall it
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-l90/development/rom-crystal-pa-8-0-crx-team-t2928842
But how can I go into Recovery Mode? System stopped on T-mobile logo..
just pull your battery out
and this how you can get into recovery, its from that thread for unlocking bootloader etc
HOW TO BOOT INTO RECOVERY PRESSING VOLUME AND POWER KEY
You can reboot to recovery via flashify app or following key combination: -
Power of your phone press both Volume Down + Power Button same time, As soon as the LG logo appears release both buttons and immediately press and hold same buttons (Volume Down+Power) again. Now Factory data reset screen will appear saying "Erase all user data & restore default settings?". Use volume down key to select "Yes" and press power button to confirm and now you should be in recovery.
Click to expand...
Click to collapse
olinojephanko said:
just pull your battery out
and this how you can get into recovery, its from that thread for unlocking bootloader etc
Click to expand...
Click to collapse
I make factory reset and i have Crystal PA (I don't install that after factory reset O.O) Thanks a lot!!