Related
DID I JUST BRICK MY PHONE??
tried flashing the i9000 rom... got messed up sometime after flashing csc and pda.... now i can boot to recovery menu and get odin to recognize but im getting an error
copy_multi_carrier from: ATT
multicsc : can not acces to /system/csc/ATT/system/
copy_common_data
then it stalls.. my power button doesnt work to reboot system now...
Even though odin recognizes i hit start and nothing happens..
can anyone help.. i will donate and make it worth your time..
No you didn't brick your phone, you need to follow the I9000 guide in the stickied threads. You need to load a Captivate kernel before fully rebooting your phone.
First off get your phone back into download mode. Pull battery and usb cable, restart Odin, then follow this method to get you into download mode, put in battery, hold down both volume buttons, keep holding them and plug in the USB cable.
First when you flash a I9000 rom make sure you uncheck autoreboot on Odin.
When this done when you flash the Rom it will say Restet in Odin. At that time pull your battery and USB cable.
Restart Odin and load the Captivate kernel. Put you battery in, hold both volume buttons, keep them held and plug in the USB cable, should go into download mode. Start Odin, and it should be fine to let it autoreboot.
I missed something it will be in the stickied thread.
Sent from my SAMSUNG-SGH-I897 using XDA App
can you clear something up is Android System Recovery the same as download mode??
ok this thread can be deleted.. im a noob.. kjpdx throw me a link to donate.. i figured it out by myself but atleast you replied..
Two different modes. Download mode shows an Android holding a shovel and Recovery mode is where you would install update.zips.
Needs to be in Download mode when installing roms and kernels with Odin.
Sent from my SAMSUNG-SGH-I897 using XDA App
Dont worry about it, glad i could help.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hi:
I have the same problem of my Galaxy S. It is stuck in this screen saying
copy_multi_carrier from: ATT
multicsc : can not access to /system/csc/ATT/system/
etc. etc.
I boot it to the download mode as instruction, but the Kies always shows connecting device, and it never gets connected. The Odin shows no com port or device for me to load the firmware. Can anyone help? Any help will be appreciated.
uehsgerg said:
Hi:
I have the same problem of my Galaxy S. It is stuck in this screen saying
copy_multi_carrier from: ATT
multicsc : can not access to /system/csc/ATT/system/
etc. etc.
I boot it to the download mode as instruction, but the Kies always shows connecting device, and it never gets connected. The Odin shows no com port or device for me to load the firmware. Can anyone help? Any help will be appreciated.
Click to expand...
Click to collapse
You can't have Kies and Odin running at the same time =P
^lol that solved my problem too! thanks!
Zilch25 said:
You can't have Kies and Odin running at the same time =P
Click to expand...
Click to collapse
Will try it later. Thanks
It is fixed. Thank you for the help. I just need to lauch Odin first prior to plug-in my phone. Now, I don't have bricked Galaxy anymore. Thanks
KJPDX said:
No you didn't brick your phone, you need to follow the I9000 guide in the stickied threads. You need to load a Captivate kernel before fully rebooting your phone.
First off get your phone back into download mode. Pull battery and usb cable, restart Odin, then follow this method to get you into download mode, put in battery, hold down both volume buttons, keep holding them and plug in the USB cable.
First when you flash a I9000 rom make sure you uncheck autoreboot on Odin.
When this done when you flash the Rom it will say Restet in Odin. At that time pull your battery and USB cable.
Restart Odin and load the Captivate kernel. Put you battery in, hold both volume buttons, keep them held and plug in the USB cable, should go into download mode. Start Odin, and it should be fine to let it autoreboot.
I missed something it will be in the stickied thread.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Thanks! I couldn't get download mode and this is the only thread online to help. I received this error when trying to install the voodoo lagfix while running cognition 2.2 beta 7. (for some reason, my cognition did not have the lagfix built in)
cliffgardner said:
Thanks! I couldn't get download mode and this is the only thread online to help. I received this error when trying to install the voodoo lagfix while running cognition 2.2 beta 7. (for some reason, my cognition did not have the lagfix built in)
Click to expand...
Click to collapse
That reason is that voodoo doesn't work with 2.2
For the sake of your wallet, I would read the threads more carefully before flashing new roms if I were you. I'm not trying to be a ****, but this issue was addressed many times in the cognition thread. I'm all for learning from others on this forum after they make the mistakes
So I recently made a thread how adb wasn't working and that evolved into not being able to get into download mode. Now after not being able to get into download mode for days, I'm still stuck on cm7 with no way of getting back to stock. 3-button recovery won't work, the only way to get into recovery is adb reboot recovery. No button and cable methods work to get phone into download mode as well as adb reboot download. I even recently tried http://www.youtube.com/watch?v=lojU5bvGz3c which is a makeshift usb jig. I successfully made it but it would only turn the phone on. WTF. I'm afraid to buy a real usb jig from online because it most likely will cause the same thing. What is there to do? I'm completely lost. The phone works, the rom is okay I just cannot get back to stock and get rid of cm7. There are lots of issues I need to fix and cannot because of this. Any ideas?????
EDIT: Now I'm completely f'ed. I tried flashing cm7 instead of MIUI again to try once more if I would have better luck on just cm7, but during flash in cwm the phone turned off because the battery compartment was loose and now the phone boots up and goes into recovery shows some code then turns off again
(This post just in case anyone missed the reason in the edit)
Reason: EDIT: FIXED! Don't know what happened. Rearranged resistors and tried again and finally got it
Click to expand...
Click to collapse
I just went back to cm7/miui and it happened again. Nothing to get into download mode is working. What's wrong with cm7 on my phone?
mikel.canovas said:
I just went back to cm7/miui and it happened again. Nothing to get into download mode is working. What's wrong with cm7 on my phone?
Click to expand...
Click to collapse
What's your process to get CM7/Miui installed?
On a side note, ADB won't connect to your device unless you have the Nexus S drivers installed on you computer when CM7/Miui is installed
When I was last on cm7 adb reboot download doesn't work.
Drivers installed
Just sayin
Sent from my unbrickable cappy *bam*
yeah, i distinctly remember the first CM7 build threads that came up here saying that adb reboot download DOES NOT work, and you DO need working 3 buttons or a jig
not sure why that was removed from the threads
A jig should work
You might be coming into contact with the resistors (I can't watch that youtube video from work--firewalled--so I don't know what the setup looks like). Any contact with the them will make it not work. Try insulating them more with some heavy packing tape.
I cut up my mini-usb plug from my car charger (didn't need it), and peeled off all the plastic so I could easily touch the correct two pins with the jig when the hacked up mini-usb is plugged in. Works like a charm. Sometimes if you aren't touching them just right, or if one end of the pin is touching the wrong point the power will come on.
Try harder with the jig, I guarantee you it will work (and you shouldn't have to buy one--it's too easy to do yourself for less than $2 and about 5 minutes).
Good luck!
Just a thought. Are you installing GB boot loaders before flashing CM7/Miui? If so, the way to get into Recovery/Download mode changes. Recovery is vol+/power, Download is Vol-/power.
Just thought I'd toss that out there...just in case
kangi26 said:
Just a thought. Are you installing GB boot loaders before flashing CM7/Miui? If so, the way to get into Recovery/Download mode changes. Recovery is vol+/power, Download is Vol-/power.
Just thought I'd toss that out there...just in case
Click to expand...
Click to collapse
That is only for I9000 GB bootloaders.
On I897 GB bootloaders its still the same as eclair/froyo!
Sent from my SAMSUNG-SGH-I897 using xda premium
b-eock said:
That is only for I9000 GB bootloaders.
On I897 GB bootloaders its still the same as eclair/froyo!
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Yeah, I know, but without all of the details. I figure it doesn't hurt to ask
Sent from a autonomous device
Thanks a ton for the info on GB i've been beating my head trying to get my Mesmerize flashed to a rooted EH09. The vol down button was teh trick i needed.
No download Mode after I897 GB Bootloaders on CM7
Hi there, i've got a question. If i can't get into download mode using the 3 button combination nor the Vol- + Power nor the connect+press buttons+insert baterry trick , do i have chance to get into download mode using the YIG? Thank you
I've lost the 3combo after installing the GB bootloaders with CM7 but the Odin Connection was lost on the SBL, The phone is not even Powering on anymore
If your phone has no signs of life at all, then sadly you are hard bricked...
But it can be fixed through jtag or the unbrickable mod.
So is there hope?
4-2ndtwin said:
If your phone has no signs of life at all, then sadly you are hard bricked...
But it can be fixed through jtag or the unbrickable mod.
Click to expand...
Click to collapse
So if i open the phone and do the unbrickable mod is there a chance to solve the problem? thank you in advance
Yes, according to those that have done jtag or the unbrickable mod, these methods are successful. To get better info though, I would recommend going to those specific threads.
4-2ndtwin said:
Yes, according to those that have done jtag or the unbrickable mod, these methods are successful. To get better info though, I would recommend going to those specific threads.
Click to expand...
Click to collapse
Thank you man i'm going to talk with Adam to see if i can solve the problem.
guilleglad said:
Hi there, i've got a question. If i can't get into download mode using the 3 button combination nor the Vol- + Power nor the connect+press buttons+insert baterry trick , do i have chance to get into download mode using the YIG? Thank you
I've lost the 3combo after installing the GB bootloaders with CM7 but the Odin Connection was lost on the SBL, The phone is not even Powering on anymore
Click to expand...
Click to collapse
I don't think you need jtag (but you can look into it). If your phone is able to at least power on, you should be able to use a Jig to get it into download mode. That is what I did with mine when all the options fail.
good luck.
0gravity1 said:
I don't think you need jtag (but you can look into it). If your phone is able to at least power on, you should be able to use a Jig to get it into download mode. That is what I did with mine when all the options fail.
good look.
Click to expand...
Click to collapse
If the phone doesn't show any signs of life (wich it wont if he failed on sbl) Jtag or Unbrickable Mod would be your 2 best bet. (Id use Unbrickable mode since it will protect you from future issues.)
Sorry haven't checked this thread in a while. My process for going to cm7/miui is flashing stock eclair through odin one click, then rooting and installing cwm. From there I just flash the latest nightly or whatever it is. Nothing I'm doing seems to be wrong
The problem is that I should be able to get into download mode without having to use a jig every single time. 3 button combo should work, but it doesn't when using cm7/miui for some reason
My Captivate is currently in a state where it can boot up and it reaches the Cognition boot screen and does nothing further. When trying to use the 2 button+usb cord method to enter download mode the phone loads the charging battery but the animation is frozen.
Would this be considered a soft or hard brick? I'm not familiar with the factors that constitute the differences between the two. Is is a soft brick because the phone can still turn on or is it a hard brick because download mode is unreachable?
I was a user of Cognition 5 v1.00 but as support of the rom by the developer seemed to waiver I felt myself looking for a new GB Rom for my phone. I first flashed Cognition 4.5.3 onto my phone in order to have a stable Rom on my phone until I could decide upon the GB Rom I wanted to try. I decided to flash CM7 and began following the steps outlined in the thread. I formatted my system, data, and cache partitions but upon reboot I reached the point where I am currently.
I have not yet tried the jig as I do not have it on hand at my school apartment. Button combos, the usb cord, and the one click unbrick have not solved the problem and I would like to know if their are any other methods I could use to enter download mode until I am able to procure my jig and try that method.
Any help would be greatly appreciated.
Soft Bricked
You are whats considered soft bricked. Id recommend pulling out battery, SIM and SD. Open odin with with admin rights. Plug your phone to the computer, press volume up and down and insert battery. If that doesn't work then I would suggest making/buying a jig and flash back to stock (eclair, froyo or GB). As to how to get CM7 to work I can't offer any help since i haven't used it in a while and flashing method changed. I can recommend Atomic Fusion, KF1 based and very nice (after u theme it)
Clay
+1 I agree with prbassplayer. You have to get into dl mode and if none of the key combos work, then a jig is probably the only way. I use one and it works great in exactly the situation you seem to be in.
edit: Sorry for the double post, forget this and read next. :-/
Clay?
+1 I agree with prbassplayer. You have to get into dl mode and if none of the button combos work for you then the jig may be you're only option. I use it and it works great in exactly the same situation you seem to be in.
You might have crossed up some files and such from going back and forth between GB and Eclair. So need to flash back to stock and start over with fresh install.
If you're still interested in CM7, after rooting, you can install Rom Manager and follow the install process in the CM7 OP or check out their website, it'll walk you thru the whole thing.
Hope this helps
prbassplayer said:
You are whats considered soft bricked. Id recommend pulling out battery, SIM and SD. Open odin with with admin rights. Plug your phone to the computer, press volume up and down and insert battery. If that doesn't work then I would suggest making/buying a jig and flash back to stock (eclair, froyo or GB). As to how to get CM7 to work I can't offer any help since i haven't used it in a while and flashing method changed. I can recommend Atomic Fusion, KF1 based and very nice (after u theme it)
Click to expand...
Click to collapse
Thank you for the input. At this point it seems that the jig is the only option as I've already tried the usb cord volume up and down process to no avail. I already own a jig, I just need to find a way to my parents house to go grab it.
They aren't hard to make to be honest and if u have a micro usb cable u don't care for it only cost w/e resistors cost for you there.
Using the SDK to use adb commands to get into download mode isn't an option as mentioned in this thread here?
http://forum.xda-developers.com/showthread.php?t=819105http://forum.xda-developers.com/showthread.php?t=1198270&highlight=soft+brick#
TheDeveron said:
Thank you for the input. At this point it seems that the jig is the only option as I've already tried the usb cord volume up and down process to no avail. I already own a jig, I just need to find a way to my parents house to go grab it.
Click to expand...
Click to collapse
If you've already installed the GB bootloaders, the button combination has changed. I believe it is just volume down-power for gingerbread. Try that or volume up-power then release once the logo starts to see if that gets you into download or recovery.
trekie86 said:
If you've already installed the GB bootloaders, the button combination has changed. I believe it is just volume down-power for gingerbread. Try that or volume up-power then release once the logo starts to see if that gets you into download or recovery.
Click to expand...
Click to collapse
That's if he installed I9000's bootloaders. Im assuming he is on I897 bootloaders if he came from Cog 5.
TheDeveron said:
My Captivate is currently in a state where it can boot up and it reaches the Cognition boot screen and does nothing further. When trying to use the 2 button+usb cord method to enter download mode the phone loads the charging battery but the animation is frozen.
Would this be considered a soft or hard brick? I'm not familiar with the factors that constitute the differences between the two. Is is a soft brick because the phone can still turn on or is it a hard brick because download mode is unreachable?
I was a user of Cognition 5 v1.00 but as support of the rom by the developer seemed to waiver I felt myself looking for a new GB Rom for my phone. I first flashed Cognition 4.5.3 onto my phone in order to have a stable Rom on my phone until I could decide upon the GB Rom I wanted to try. I decided to flash CM7 and began following the steps outlined in the thread. I formatted my system, data, and cache partitions but upon reboot I reached the point where I am currently.
I have not yet tried the jig as I do not have it on hand at my school apartment. Button combos, the usb cord, and the one click unbrick have not solved the problem and I would like to know if their are any other methods I could use to enter download mode until I am able to procure my jig and try that method.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
download mode thru adb is a good idea...
or gb key combo for download mode as someone else also menioned...coz u r already on gb bootloaders..
prbassplayer said:
That's if he installed I9000's bootloaders. Im assuming he is on I897 bootloaders if he came from Cog 5.
Click to expand...
Click to collapse
but i think gb bootloaders...be it i9000 or i897....hav the same key combo to get to download mode..i m sorry if i m wrong..as i m on i9000 bootloaders...
^^^ you are wrong, the captivate boots have the same combos they've always had eclair/froyo/gingerbread
Only the I9000 boots have different combos.
studacris said:
^^^ you are wrong, the captivate boots have the same combos they've always had eclair/froyo/gingerbread
Only the I9000 boots have different combos.
Click to expand...
Click to collapse
as i already said...may be i m wrong..
thanx for the info...though i m on cappy ..but first gb botlaoders i had was i9000 while flashin apex..and m still on it....so didnt pay attention
i m using xda classin.so dont hav thanks button..so thanx here only..
killer_raj said:
download mode thru adb is a good idea...
or gb key combo for download mode as someone else also menioned...coz u r already on gb bootloaders..
but i think gb bootloaders...be it i9000 or i897....hav the same key combo to get to download mode..i m sorry if i m wrong..as i m on i9000 bootloaders...
Click to expand...
Click to collapse
No on Cog it is not. You can use the 3 button method just fine.
FYI GB bootloaders are not designed for CM7. CM7 used Froyo based bootloaders for its roms.
I've been browsing for a while all over google and this site and still can't find anything that can help me so I'm asking.
I'm a basic Captivate user with no experience with flashing and rooting, but I saw Serendipity7 and thought the instructions were simple enough to follow on the weebly site. I downloaded the ROM files and the Installation files and extracted them. I followed the instructions perfectly by installing the drivers for my phone, opening Odin3 1.7, selecting the PDA, PHONE, CSC and PIT files then put my phone in download mode. I waited for the ID:COM to pop up then hit start. The blue bar on my phone and the one in Odin started working for about 30 seconds to a minute, not even the first box was done, then my phones screen turned straight blue, and Odin3 said it failed. The popup in the corner of the computer screen then said that my phone is no recognized for some reason.
Now my phone opens to the boot screen that says
"GALAXY S
gt-i9000
SAMSUNG"
and it just sits there. I can't get into download mode, and when I plug it to charge the screen with the battery level freezes and sits there.
Can somebody help me? I am a serious noob here that assumed simple directions were easy to follow (who knew they weren't?).
Thanks a million
Looks like Odin failed(again) you need to try to get into download mode again. Might need a jig.don't ask me about the jig tho cause i never had to use one. And I got mine when it came out.
Sent from my SGH-I897 using XDA Premium App
That happened to me once after flashing Firefly. Because we had a postal strike at the time I couldn't order one but I followed this guide and made my own and it worked perfectly. http://forum.xda-developers.com/showthread.php?t=819551
Yea, just try to reflash. There are 3 ways to get into download mode again. See this post. Number 3 always worked for me the best.
http://forum.xda-developers.com/showthread.php?t=819105
If you keep having problems with Odin, try Hemidell.
http://forum.xda-developers.com/showthread.php?t=1191094
You have I9000 bootloaders pull the battery reinsert and download mode should be volume down and power no usb cable insertion needed...
Yea you're definitely gonna be able to fix that quickly. Redo flash get into download mode either holding down volume down and inserting usb or hold down and hit power.
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.
Were the GB bootloaders even installed?
Sent from my GT-I9000 using XDA App
Thanks everyone who helped out, one thing tho...
None of the key combos are working for me so I'm just gonna us the jig fix to get into download. I know I need to use a 300k ohm resistor but does it matter if I use a 1%, 2% or a 5% resistor?
Thanks again
^ I've used 1/4 watt 5% tolerance with success.
I got into issue while flasing samsung captivate from 2.2 to 2.3 using the thread mentioned here ( http://forum.xda-developers.com/showthread.php?t=1300843)
I also went through threads to unbrick using the below threads but could not bring the phone out of it
I can get to Downloading .. prompt but cannot recover the phone
Kindly help me with this
Here are the links i used
http://forum.xda-developers.com/showthread.php?t=1242466
http://forum.xda-developers.com/showthread.php?t=1153310
chandu_b said:
I got into issue while flasing samsung captivate from 2.2 to 2.3 using the thread mentioned here ( http://forum.xda-developers.com/showthread.php?t=1300843)
I also went through threads to unbrick using the below threads but could not bring the phone out of it
I can get to Downloading .. prompt but cannot recover the phone
Kindly help me with this
Here are the links i used
http://forum.xda-developers.com/showthread.php?t=1242466
http://forum.xda-developers.com/showthread.php?t=1153310
Click to expand...
Click to collapse
See if this thread will help.
This other thread may help towards getting into recovery mode.
Hello
Thankyou for the reply
I was able to get the phone to "Downloading mode" but its not working from there
I tried the links you pointed out and phone seems to be still stuck
When i boot my phone normally, i still have "mobile .. Exclamation .. PC " icon
I can put my phone to Downloading mode with android icon and Odin recognises my phone
But im not able to recover the phone from that state
Can you guide me to thread which can help me from those steps
Shls i download bootloader or without bootloader ...any steps are appreciated
I was once in the spot you are in, even to the point of having the same screen and not getting to Recovery.
I solved my problem with this Heimdall One-Click from the thread you originally referenced:
I897UCKK4 Stock, Wipe, with option to install Bootloaders, Param,and Repartition-Heimdall One-Click.
Man.. you are my hero
My fone is up and running now with first time flash. i see some pixel thing u mentioned but everything is sweet
Could you kindly help me show steps to upgrade the fone to latest software ,, lollipop or kitkat
thanks again
I took mine up to CyanogenMod 10.2, which is JellyBean 4.3.
Since then I have reflashed it with GamerzRom v4, based on CyanogenMod 10.1 - JellyBean 4.2.2. It's thread is here.
I am using my Captivate as a media player and Sports App/Activity tracker. In fact I have disabled much that came with the ROM, an act to pare down what is running on it. I haven't tried any of the KitKat or Lollipop ports available in the forum. Recommending any of them would be pure guesswork on my part. The best I can do is suggest reading a portion of the threads for the ROMs available, being clear about what you expect your phone to do, and try the best fit. There is no reason you couldn't try several.
Thank you fro the reply
how did you get into recovery mode?
I tried pressing volume up/down and power button and all i see is att logo
Go into download mode and use odin one click to flash stock Rom.
There are many ways to boot into download mode, its different from recovery mode in case you bricked your phone and you're not able to access the recovery you could try going into dl mode and using a computer and a USB cable to fix it. I will post a tutorial link.
chandu_b said:
Thank you fro the reply
how did you get into recovery mode?
I tried pressing volume up/down and power button and all i see is att logo
Click to expand...
Click to collapse
It's been a couple of years, but I think I used one of the battery pull methods listed in the second link I posted. A quick clip from that post:
FROM A POWERED-DOWN STATE - BATTERY REMOVED
- Insert battery, then press and hold Vol+ and Vol-, then press and hold power. hold all 3 for 5 seconds.
- Press and hold Vol+/Vol-, Insert Battery, hold power. hold all 3 for 5 seconds
- Press and hold Vol+/Vol-, hold power, Insert Battery
- Insert battery, then press and hold Vol+, then press and hold power. hold all 3 for 5 seconds.- Press and hold Vol+, Insert Battery, hold power. hold all 3 for 5 seconds- Press and hold Vol+, hold power, Insert Battery
Click to expand...
Click to collapse
dawgdoc said:
It's been a couple of years, but I think I used one of the battery pull methods listed in the second link I posted. A quick clip from that post:
Click to expand...
Click to collapse
trled these and i still have att logo
Before you started all of this were you on GingerBread bootloaders?
If you were not on GB bootloaders, did you flash them when you used the Odin/Heimdall One-Click?
At this point I am thinking you should have a stock recovery on your phone. Even so, you should still be able to get into Recovery Mode, either stock or custom, with one of the listed methods. I am almost at the point of suggesting you reflash the Odin One-Click.
dawgdoc said:
Before you started all of this were you on GingerBread bootloaders?
If you were not on GB bootloaders, did you flash them when you used the Odin/Heimdall One-Click?
At this point I am thinking you should have a stock recovery on your phone. Even so, you should still be able to get into Recovery Mode, either stock or custom, with one of the listed methods. I am almost at the point of suggesting you reflash the Odin One-Click.
Click to expand...
Click to collapse
Thanks for the reply
I was on froyo 2.2 and while i was flasing to GB i got into issue
I used the steps you mentioned to recover the device from bricked mode
now i have stock rom and the phone is up and running fine but could not get into recovery to flash a new rom to move to 4,4
The solution may be to Odin flash a KK4 kernel that includes CWM recovery. I an searching for the Corn KK4 kernel, the one I used, but have yet to find it.
---------- Post added at 11:30 PM ---------- Previous post was at 11:22 PM ----------
dawgdoc said:
The solution may be to Odin flash a KK4 kernel that includes CWM recovery. I an searching for the Corn KK4 kernel, the one I used, but have yet to find it.
Click to expand...
Click to collapse
Found the kernel thread, read it carefully before proceeding:
http://forum.xda-developers.com/showthread.php?t=1403723
dawgdoc said:
The solution may be to Odin flash a KK4 kernel that includes CWM recovery. I an searching for the Corn KK4 kernel, the one I used, but have yet to find it.
---------- Post added at 11:30 PM ---------- Previous post was at 11:22 PM ----------
Found the kernel thread, read it carefully before proceeding:
http://forum.xda-developers.com/showthread.php?t=1403723
Click to expand...
Click to collapse
Thank you for the info
This fone is giving me very hard time
Suddenly, Odin cannot recognise the phone in Downlaod mode
It does recognise when fone boots up but not in download mode
Will figure that out and try kernel,, thank you
chandu_b said:
Thank you for the info
This fone is giving me very hard time
Suddenly, Odin cannot recognise the phone in Downlaod mode
It does recognise when fone boots up but not in download mode
Will figure that out and try kernel,, thank you
Click to expand...
Click to collapse
Before you flash more with bootloaders and modems I would suggest using the Phone Info *Samsung* app to verify what is on the phone. It is free in the Play Store, the dev is vndnguyen. I don't actually think there would be a problem one way or the other, but it's always good to know and this way you flash the correct kernel.