Database Develop

[Q] How to flash Galaxy S M110S (Korean version) with Odin?

Hello all, I have a Galaxy S M110S (Korean version) from Anycall
Few days ago, I flashed it with i9000 firmware (XXJP3). It passed but it didn't recognize my Sim card so I can't make any phone call or SMS.
How can I recovery M110S firmware.
I have some firmware for this (DH07, DH09, DH19)... but when I flash it with Odin, it always fail. I tried with the pit file 512 or 513, tick & untick at re-partion but the same error appear.
Can anyone help me?
Thanks a lot!

Can anyone help me?

Mabumap2k6 said:
Hello all, I have a Galaxy S M110S (Korean version) from Anycall
Few days ago, I flashed it with i9000 firmware (XXJP3). It passed but it didn't recognize my Sim card so I can't make any phone call or SMS.
How can I recovery M110S firmware.
I have some firmware for this (DH07, DH09, DH19)... but when I flash it with Odin, it always fail. I tried with the pit file 512 or 513, tick & untick at re-partion but the same error appear.
Can anyone help me?
Thanks a lot!
Click to expand...
Click to collapse
No need to use PIT file - put firmware file (DH19 etc) into PDA field
Dont change any options
If your Korean i suggest to check out - matpclub.com - korean smartphone community

I fixed my bricked phone using JP3 firmware from samfirmwares.com and the Korean Froyo 2.2 update (which I found in Google)and used Odin. I'm pretty sure its not supposed to work but it did for me and now I have Froyo on my Samsung Galaxy S Shw-m110s The only problem now is there are two boot screens. The Regular galaxy S boot up and the Korean one lol

brother u have any link for this phone ı have same phone korean galaxy

my shw m110s anycall
i flashed it by odin flasher it was dg24
i flashed it with dg23 firmware and then it field i dont know what to do
plz help me

hi to all
the solve for this problem is using the Special
SHW-M110S Recovery Zip
from this site and use odin3 1.82 and change the bootloader
the bootloader is in the you download from the site and as to pit file
there's 2 pit file use m110s.pit
I try it from 2 min and it's work's fine
salam

Flash and PIT File for Samsung M110s
http://www.filesonic.com/folder/fa10d9e502c92717b

No links to show PIT M110S

mhammadleo said:
hi to all
the solve for this problem is using the Special
SHW-M110S Recovery Zip
from this site and use odin3 1.82 and change the bootloader
the bootloader is in the you download from the site and as to pit file
there's 2 pit file use m110s.pit
I try it from 2 min and it's work's fine
salam
Click to expand...
Click to collapse
hi, i cant find any recovery zip and i cant find m110s.pit...
links not work.
it really works fine?
please, tell me at greater length how i need to do to fix my phone, thank you
sorry my english(

karabey said:
Flash and PIT File for Samsung M110s
http://www.filesonic.com/folder/fa10d9e502c92717b
Click to expand...
Click to collapse
Hi mate link is not working please can u give me working link?
THANKS

Hello Guys
Well i have m110s 16 gig and it has ginberbread installed couple of weeks back i was copying files and it screwd my phone and since then it gives me an error that damage internal sd card. Guys ofcourse it's not hardware issue because i have seen the motherboard of m110s and thre is CHIP(rom) in there for storage and if i can flash my phone with different vertion of rom back and forth then it means the memory works just fine. I belive it could be problem with partion. because i can see only 98 mb of space which it allocates for cahe. I think possible solution could be stock Pit file or Bootloader or both of them. if i flash it with stock files i guess things would get ok.
But seriously guys it's annoying me now as i can just use it as phone and not smartphone.Can you guys help me out in this.
Thanks

HEEELP !!! My Galaxy Tab freeze in Samsung logo !!!!

Please help me !!!!
My glxy Tab P1000 work fine !!!
I try to upgrad to 2.3.3 by using firmware P1000JPJPC, using odin 1.7
In the first, i use P1_EUR.pit and i use "Re-Partition" ( the flash process is aborted – fail !!!)
I retry by using "P1_add_hidden.pit and i use "Re-Partition" ( The flash process success – pass) the tab restart in recovery and show error !!! in restart the tab is freeze in glaxy logo !!!!
I try many firmware (differente region and version) an all "PIT" fliles the sam result !!! freeze !!!
I use ROTO-JME for p1000 and the same result !!!!!
I try to remove battry, and not any result !!!
Please help me !!!! i read may tuto in this forum and other and i use many solution, not result !!!!!
For information, the tab is put in download mode !!! (no problem)
HEEEEEEEEEELP !!!

I dont recommend P1000JPJPC because its beta version and has many bugs.
Use P1000JPJM5 then use KIES to update your CSC to P1000OJPJM8 (OFFICIAL).
Download .PIT :
http://www.multiupload.com/ZL9HDOGI5V
P1000JPJM5 :
http://hotfile.com/dl/109292691/6006995/P1000JPJM5.rar.html
1. In Odin select re-partition then in DOWNLOAD MODE install .PIT (P1.PIT only !)
Now your TAB will restart then you'll see SAMSUNG
2. Now goto DOWNLOAD MODE again and install PDA, PHONE & CSC file
(dont select re-partition this time).
DONE

hope you solve your problem buddy

omr911 said:
I dont recommend P1000JPJPC because its beta version and has many bugs.
Use P1000JPJM5 then use KIES to update your CSC to P1000OJPJM8 (OFFICIAL).
Download .PIT :
http://www.multiupload.com/ZL9HDOGI5V
P1000JPJM5 :
http://hotfile.com/dl/109292691/6006995/P1000JPJM5.rar.html
1. In Odin select re-partition then in DOWNLOAD MODE install .PIT (P1.PIT only !)
Now your TAB will restart then you'll see SAMSUNG
2. Now goto DOWNLOAD MODE again and install PDA, PHONE & CSC file
(dont select re-partition this time).
DONE
Click to expand...
Click to collapse
thanks for your reply, i already try this firrware, and i retry your method step by tep, the same probelem !!! the tab is freeze in galaxy logo !!!!
I do not understand !!!!

Did you wipe all things?
Which errors do you have in recovery mode?

dynamitor said:
thanks for your reply, i already try this firrware, and i retry your method step by tep, the same probelem !!! the tab is freeze in galaxy logo !!!!
I do not understand !!!!
Click to expand...
Click to collapse
Just install PDA, PHONE, CSC and leave .PIT then your TAB will reboot and freeze at SAMSUNG.
Just wait and don't do any thing it happens after flashing.
SAMSUNG logo takes time

gtUser1000 said:
Did you wipe all things?
Which errors do you have in recovery mode?
Click to expand...
Click to collapse
after flash firmware P1000JPJPC, thi error

Try installing Overcome ROM. It's one of the best.
Go here and follow the guide http://p1000.teamovercome.net/?page_id=64
The guide is very well done and easy to follow. Just make sure you don't skip anything. All the needed files are there.
Good luck and keep us posted how it went.
Sent from my GT-P1000 using XDA Premium App

did you edit a file or the zipfile?
May you have damaged the zip or the config file, it looks like it isnt linux conform anymore.
if you didnt change anything you should try to redownload it or use a rom like the overcome ones.

May i know if you are from a Froyo or Gingerbread? I guess you are from Froyo,and the problem at your bootloader and can follow the guide from overcome posted about,hope it helps

omr911 said:
Just install PDA, PHONE, CSC and leave .PIT then your TAB will reboot and freeze at SAMSUNG.
Just wait and don't do any thing it happens after flashing.
SAMSUNG logo takes time
Click to expand...
Click to collapse
I wait, wait and ait few hors !!! teh same problem !! freeze !!!

Did you solve your problem ?
Are you still able to go to Download Mode ?
It might be bootloader problem.
Try this http://forum.xda-developers.com/show....php?t=1205990
Good luck

ayong chia said:
May i know if you are from a Froyo or Gingerbread? I guess you are from Froyo,and the problem at your bootloader and can follow the guide from overcome posted about,hope it helps
Click to expand...
Click to collapse
I start from a Froyo, and i folow tuto from overcom step by step, the problem, is after restart !!! after download and flash "001001-GB-Stock-Safe-v5.zip" with "gt-p1000_mr.pit", the tabs show error in picture 01, no the same error show in tutorial from overcom !!!!
In overcom tuto, the install update is successfully !!! in my tab, the istall updte is aborted !!!! show the picture !!!!
After, the tab freeze in galxy tab logo !!!!!

tupo05 said:
Did you solve your problem ?
Are you still able to go to Download Mode ?
It might be bootloader problem.
Try this http://forum.xda-developers.com/show....php?t=1205990
Good luck
Click to expand...
Click to collapse
My tab go in download mod normaly !!!! and i folow the tutorial, the same problem, read my previouis post !!!

dynamitor said:
My tab go in download mod normaly !!!! and i folow the tutorial, the same problem, read my previouis post !!!
Click to expand...
Click to collapse
Hummm That's weird man. Are you sure you are following all the steps in the tuto ? Including the part about bootloader and some possible patch ? Because that could be the problem you are having. Just read the guide carefully please and try again.

thanks for your help my friends, i finaly repir my galaxy tab !!!
the solution :
i flash my tab with this firmware "P1000JPJPD_P1000OJPJPE_P1000JXJP4_HOME.tar.md5" and "gt-p1000_mr.pit"
aftern no error in recovery !!! and the tab start normaly !!! and after i try to reflash my phone with "001001-GB-Stock-Safe-v5.zip" for teste only !!! after no errore in recovery !!! I noticed the first firwmare are repair my tab !!!!
i find this stock firm in this thread :
http://forum.xda-developers.com/showthread.php?p=18410689
and link for this firmare is :
http://www.multiupload.com/IVKH1NMW7C
and I hope that my experiences and your posts will help others!

Glad to hear that you are up and running dude.
Sent from my GT-P1000 using XDA Premium App

Freeze on SGS3 logo

Hi
A friend has flashed the following CF-Root "CF-Root-SGS3-v6.4.tar" by mistake.
Then... stuck on Samsung's logo and "Galaxy SII" appears. He tried to flash via Odin the firmware I8190XXALK6 - Novembrer, 2012 but the problem still remains.
The Download mode is available but not the Recovery mode.
What can he do to solve this issue?
Thanks for your precious help! Don't hesitate to ask me for further information.
Galaxy SIII Mini
Android 4.1.1
GT-I8190

Flash the attached file in pda.

Thanks for your help.
I'm goign to transfer that file to my friend.
I'll keep u informed.

The phone boots without any issues except that the SGS II logo is still here.
A new flash through Odin could solve it?
Thanks again.

try to flash full firmware.

Have you Full Firmware (pda, csc,modem)?

http://www.hotfile.com/dl/181522827/74b9c77/I8190XXALK6_I8190XEFALK1_XEF.zip.html

are the 3 Files?

one file include all.

where add this file?
I have a bad flash and i now it is my internal sd not as should be.
I wanted all files for my phone for Odin (Pit file, Modem, CSC)
.

there is not pit file.
just put the tar file inside zip in pda and flash.

My mistake.
the boot logo not include in firmwares, i made one for u.
it shold work.

Memphis_ said:
The phone boots without any issues except that the SGS II logo is still here.
A new flash through Odin could solve it?
Thanks again.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=35135484#post35135484

you are my hero :victory:

Thanks avicohh
I've just transfered your link to my friend.

please help with S5830i

hello every one
i have tried to flash a stock rom previously with odin
but it seems i flashed an incompatible stock rom
now everytime the device restart it stuck on the loggo screen
then a black screen appears and thats it
and now when i try to flash the right one
odin stuck at SetupConnection..
how to fix this
thats all what happens
pleeeeeeeeeeeease help me

guys
i am using odin 1.48 and also i have 1.45
they both giving me the same results ... after checking of boot imag,pda,phone,and csc
after that there is file anylises , then setup connection.. but then it shows all thread complete..(sucseed0/failed 1)
i think the problem is with connection between device and odin
and i am not sure if my device running in download mod since the screen doesn't show
do i have other options to flash stock roms instead of odin?
pleeeease help me
any help would be soo appreciated
regards

BADroid-z said:
guys
i am using odin 1.48 and also i have 1.45
they both giving me the same results ... after checking of boot imag,pda,phone,and csc
after that there is file anylises , then setup connection.. but then it shows all thread complete..(sucseed0/failed 1)
i think the problem is with connection between device and odin
and i am not sure if my device running in download mod since the screen doesn't show
do i have other options to flash stock roms instead of odin?
pleeeease help me
any help would be soo appreciated
regards
Click to expand...
Click to collapse
Try odin v3 and download newest firmware from samfirmware. You extract the zip and put the file in pda. Then press Start.
How long did you wait after the black screen? Maybe it is a black screen because it has not the right bootanimation enabler. Try waiting 5 minutes after black screen.

BADroid-z said:
hello every one
i have tried to flash a stock rom previously with odin
but it seems i flashed an incompatible stock rom
now everytime the device restart it stuck on the loggo screen
then a black screen appears and thats it
and now when i try to flash the right one
odin stuck at SetupConnection..
how to fix this
thats all what happens
pleeeeeeeeeeeease help me
Click to expand...
Click to collapse
ur probably soft bricked device go to sammobile and download latest firmware in ur country then download Odin v3.07.zip [google ] and flash PDA from sammobile ... ur done

[Q] Galaxy Note stucks Sometimes

hello guys
i have put a new pit file on my galaxy note (Q1_20110914_16GB.pit) cuz i had wiped with stock rom ! and i think i did a superbrick !
now it shows only 8.54GB internal space but i dont care!!
but it just freezes and i have to reboot but after a while it freezes again and again !
i can normally boot the OS and i can go to recovery mode and download mode but when i want to install new rom it works only with this pit file (Q1_20110914_16GB) if i put the original pit file it stucks on odin on factory.
i run a test for the emmc bug with cwm this a program that checks the blocks and at 324mb stucks and the second test stucks on 2943mb or MiB im not sure ..
does smb have same problems??
pls help
thank U
best regard

I think the PIT file you are using is the default PIT file. As you have done scans, you might need to use a custom pit. Head over to hg42 thread in general section and try the pit. You can also ask for advice in that thread.