Related
I had loaded the ginger clone rom and all was well. I then however wanted to swap kernels so i loaded up seitrons cwm 1.5.6 and proceeded to flash through cwm. this has now become the worst day of my life. the phone will not boot past the galaxy s screen. i cannot not get into recovery and both computers now say usb device not recognized when in download trying to flash odin. i am worried that something is corrupted on my phone because not matter how many times i uninstall and reinstall the drivers no luck. i think it is officially bricked and im sol. maybe some great minds can figure it out here.
It's not bricked - issue is trying to get your computer to recognize your phone when in download mode so you can flash it back.
What OS are you running? Also - where did you download the drivers from? Some seem to work better than others.
If you can get to the galaxy screen you might still be able to to get into recovery. pull out the battery and use the 3 button combo. Hold down both volume button then power and let go of the power button after it turns on. then just reinstall the rom
I'm willing to bet you can also get into Download Mode either with button combos, or a JIG. Once in Download, you can use Odin to restore to JF6, and have a working phone to flash around with again.
i can get into download mode no problem. and i think it is quite possible drivers are corrupted on the phone itself. my wifes phone works on the same exact setup. no usb device not recognized error. i have tried the drivers from here and samsung directly with no luck. 3 button combo does not work. sim out sim in battery out and in. but like i said it will just not register with the comp and hers will. so im going to att and seeing about replacing it. but i will see how that goes. ive done this lots of times with no issues ever.
download works
3 button combo does not so no recovery
usb device not recognized error
thanks for the help and keep it coming i will try everything if i haven't already.
Try current usb port
Sent from my SCH-I897 using XDA App
Think I'm in worse shape. Tried flashing just the kernel to get BLN working again (last ROM I put on somehow loaded a non-compatible kernel). Now the phone boots the white ATT screen and just sits there. Can't get it into D/L mode with 3-button and doesn't respond to computer I have been using to flash ROMs for a couple weeks now...
Am I hosed? ANY help would be greatly appreciated...
You could try to use a JIG to force your phone into Download Mode
Okay...well, got into D/L mode finally. Used Odin to get it back to factory. Used the One Click rooter again, except now it boots to recovery 3e, which doesn't let my power button work as the okay button Pulling the battery to reset it, but it will no longer go into D/L mode to use Odin again. It keeps booting to the recovery Utils, which I cant get out of...*sigh*
Thoughts?
at least your able to do something i still cannot get my phone into recovery or to be recognized by the computer. it is not the drivers so i have no idea. i can only think that something got funked up with the kernel flash.
if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms
have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good
magnumrt562 said:
have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good
Click to expand...
Click to collapse
i actually tried this yes. i had a blackberry cable from the storm (shivers) that was laying around. tried that but no luck with that or my wifes cable as well. but a good tip for others nonetheless
Pirateghost said:
if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms
Click to expand...
Click to collapse
I just want to quote this to stress the importance.
Thank you, didn't realize that (still sorta new to this)...
I downloaded a zip (I thought from here somewhere) that extracted into the 4 files. Anyone got a link to the JH6 set of files?
I also downloaded DG's "One Click Odin", but it doesn't seem to really do anything when I run it unless I manually load all the files. Also, I don't see a "Master Clean" like the post refer too
are you sure you downloaded the right odin? in the one click version, theres no option to load files at all. only a "start" and "master clear"
make sure the odin one click is open before you connect your phone.
http://forum.xda-developers.com/showthread.php?t=731989
You guys rock! I don't know how, cause I could have sworn I D/L'd it from that link before and I got the generic Odin, but it looks like I have the right one now! Thank you for your patience with us noobs as we start getting into this new world!
glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol
zippox180 said:
glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol
Click to expand...
Click to collapse
I was having the same problem. Have you tried powering off, start odin, hold both the volume up/down, then plug in the usb to your phone?
Hi everyone! I have Captivate(1008 batch) with Phoenix Ultimate firmware. Today I tried to flash it with batch Gingerbread. Seems like my mistake was that I forgot to turn off lagfix. Odin halted. Now I'm getting "phone-!-PC" screen each time I connect phone to PC...
I can not get cappy into download mobe(tried all 3 ways)
Odin doesn't see phone...
Do I have any chaces to repair my phone or it's a brick? Is there a chance that jig will help?
There's a new thread in the dev section about a one click unbrick from that screen. I read that it's just downlad the software, plug in phone and click run.
AdamOutler made this -
http://forum.xda-developers.com/showthread.php?t=1153310
Ok, thanks I'll try that! BTW which fimware should I flash if my cappy is back to download mode? As I understand Phoenix formated my phone memory into ext4 filesystem. Is that possible to flash stock Gingerbread on ext4 filesystem?
UPD: Unfortunately software unbrick doesn't help I got "Phone is not connected" message. My PC doesn't see phone at all
The Jig should work, assuming you don't have mixed bootloaders. If you do have mixed bootloaders, JTAG service will be what you need.
If you do manage to get back to download mode, use the JF6 Odin 1-click.
You can get it here: http://forum.xda-developers.com/showthread.php?t=731989
Here's another suggestion that I did with a 1008 that I had a while back. open Odin 1 click to prepare for download mode. (make sure it's not one with the three button fix - if you one click from gingerbread to 3 button fix stock, it is a certain hard brick).
Remove battery, count to 10, replace battery.
hold the vol up and vol down buttons at the same time until you see the screen flash. It should flash every 5-7 seconds as long as you continiuosly hold the buttons.
When you see the screen flash, insert usb cord (with it already connected to computer).
This got me to download mode. It mat take a few tries. sometimes it's a challenge to get to DL mode from this screen. This procedure worked on my 1008. Hope it works.
A jig may work too, but it n ever worked for me on the 1008.
Thank you guys. Hope your suggestions will help!
With the phone and PC screen the Jig will work for sure try and make one or u can buy it.
You can also try this, Remove the battery open odin 1 cick and plug the cable to the usb port at the back of the PC and then the phone and now put the battery see if the odin lits up if yes you are done.
I solved the problem(even without jig). So writing my solution, hope this will help someone.
1) I went home to use another PC. Installed Samsung drivers there.
2) I tried different key combos. Vol Up + Vol Down didn't worked but Vol Down + USB entered Download mode.
3) One guy from russian android forum told me to try with Odin 1 click 2.1 stock firmware. Only this version of firmware connected to my soft bricked phone.
One more time thanks everyone for your replies
For future reference.
If your phone turns on (you can see anything on the screen), then you do not have a perminate brick, and a jig will work.
And your filesystem/lagfix does not matter with odin 1click. It resets everything to the way it came, nomater what you came from. (It even works on cm7 witch repartisioned it and used MTD).
I have the same problem as you. I can't get get the one-click unbrick to work (doesn't detect a device). I ordered a jig yesterday, hopefully it comes soon. I have a 1010 though, which I heard had more problems than others.
use a JIG
i made my custom JIG for 60 cents, save my Cappy after a failed cyanogen install.
I followed instructions on a link via the cyanogenmod website, to try and get cm7 on my phone. The instructions were on a wiki website which I now know is not reliable!
I got to the stage "flashing cyanagonmod" to find out that the zip files had to be in the internal sd card BEFORE starting the whole process!
I can still access download mode and recovery. But my phone gets stuck on the "Samsung galaxy i9000" intro screen.
I tried restoring and factory reset but still no joy...
any help is very appreciated!
Download some odin flashable ROM, and flash that in download mode.
where do I find an odin ROM and how do I know which one to use?
corrected: samfirmware.com
If you want a custom rom, then look through here however your going to have to read which is odin flashable...
This is a guide and rom i have used myself. Click here
BTW this is obviously assuming you are on SGS I9000 the second link should be quite clear...
here's a nice link to finding stock firmwares and using Odin:
http://forum.xda-developers.com/showthread.php?t=1102881
Talon26 said:
samsungfirmware.com
If you want a custom rom, then look through here however your going to have to read which is odin flashable...
This is a guide and rom i have used myself. Click here
BTW this is obviously assuming you are on SGS I9000 the second link should be quite clear...
Click to expand...
Click to collapse
Thanks for your post. Only problem is ODin doesn't recognise when my phone is plugged in? i.e. there isn't that yellow box showing...help!
Ok so im guessing your trying the 3 button combo for download mode (vol up + home + power). Alternatives to force download is a homemade jig, which is easily obtainable from ebay for a relatively cheap price. Other ways you can try is holding the combo for as long as you can, some have reported it may even work after 3 mins. Another method is hold the combo and then whilst holding it insert the battery. Also the last method but have the usb plugged into with odin open, then put the battery in. Many many ways... just search
Is that what you mean or that you CAN get to download mode and Odin and the computer does NOT recognise when you plug it in. If this is try re-installing the drivers using kies, its under the tools menu. Try a different version of odin, plug phone in then try the combo (with battery already in, then without). Have you closed all Kies applications background processes? (use task manager in windows). Use another computer..
Also have you read this
Edit: Forgot to add, can you get into Recovery? Then use your nandroid backup which you should always do before flashing.. If you dont have a back up try use ADB to force download mode "adb reboot download"
Need to know what options you have available in-order to help, what can you do? Is there any response from your phone with pressing buttons or key combinations??
Hello everybody!
I've tried to find a solution, but without success.
Today I tried to install CWM on a french Galaxy S.
I've rooted the phone with z4root and after I started on download mod with adb.
Then with Odin3 I installed this file "Root-XX_OXA_JVK-v2.7-CWM3RFS.tar".
After that the phone rebooted automatically, unfortunately it's rebooting eachtime on the galaxy s logo.
The problem are that I can't boot on download mod or on CWM.
When the phone is off and I plug it on charger, it doesn't charge!
I think my phone is bricked.
Do you think you can help me or it's dead?
Is there a hard reboot procedure or something like that?
Thanks
I have exactly the same problem!
Are you sure you can't enter recovery? Volume up+home+power.
Sent from my GT-I9001 using xda premium
Yes i'm 1000% sure!
I can acess the Download Mode, but Odin/Heimdall does not recognize the USB connection...
Keep Trying
I know this is weird but keep hard resetting it. Try like 20 more times before you give up. Worked for me in the past I know it is weird. I had just flashed a new factory ROM.
I swear i have tried to enter the Recovery 20-30 times!!
It's fine
Hello,
I've bought an USB JIG for my SGS GT i9100 and I've been able to install ICS SLIM using Odin v3 1.7.
Very easy...
I advise this solution..
Thanks for your help.
Italia99 said:
I swear i have tried to enter the Recovery 20-30 times!!
Click to expand...
Click to collapse
did u try vol down + home + power button to go to download mode? if it can do that, the problem is just find some driver to make odin recognize your phone. search for "usb driver for samsung galaxy s" in google
then you can bring back your phone to live by downloading any rom you want and flash it via odin
ps. but if you cannot go to download mode, JIG USB with 301 K ohm will help you look at http://www.youtube.com/watch?v=Rdn5GoRjhn0
Same problem here, I actually didn't see this in my search and made a new thread about it (feel free to delete). My computer had KIES on it so it had the drivers already and it's the same computer I went through the download mode before with so I have the drivers. I tried to reinstall them but still nothing.
I fear I may need to buy out my contract :crying:
Tical84 said:
Same problem here, I actually didn't see this in my search and made a new thread about it (feel free to delete). My computer had KIES on it so it had the drivers already and it's the same computer I went through the download mode before with so I have the drivers. I tried to reinstall them but still nothing.
I fear I may need to buy out my contract :crying:
Click to expand...
Click to collapse
I am sure that I am right with this. "If you root, do not use KIES" so you have to uninstall KIES and download separate USB driver.
Then it should see your phone when connect with ODIN
Hope you got your phone back alive soon
USB Connection
Italia99 said:
Yes i'm 1000% sure!
I can acess the Download Mode, but Odin/Heimdall does not recognize the USB connection...
Click to expand...
Click to collapse
Did you checked usb drivers, if not try to connect another samsung android device to your pc first. if another phone connected properly then problem in your phone only.
i suggest check this thread, if you think you completely lost your device - http://forum.xda-developers.com/showthread.php?t=819551
coepeq said:
I am sure that I am right with this. "If you root, do not use KIES" so you have to uninstall KIES and download separate USB driver.
Then it should see your phone when connect with ODIN
Hope you got your phone back alive soon
Click to expand...
Click to collapse
Sorry, I should have been more specific. When I reinstalled the drivers I had actually uninstalled KIES and installed just the drivers.
I do have an update though but still can't get it to boot completely. Late last night I decided to try to get download mode to work one last time before passing out and pressing Vol-, Home and Power actually brought me to the recovery screen for the first time in my phone's life! "F YA!" was the only thing I could think at the time so I first went through and formatted/wiped every option I could find then installed the CM9 that I knew worked and now I get to the alien with the matrix-esque background and it stops there. I plugged it in and left it on that screen all night and that guy was still staring at me this morning. I tried download mode again but my computer still doesn't recognize it.
Hello XDA peeps,
So here is my situation, some days ago (like 3-4 months ago) I installed CM 10.1 on my Captivate. Everything went well and I can even open my phone and use it. But the problem was, after installing that ROM, I no longer can get into recovery mode or download mode. I tried everything possible, the button combo method, button combo and battery pull in method, button combo and USB pull in method and also tried ADB "restart recovery / reboot download" I think, (does not remember because it was 3-4 months ago). Tried everything correctly and stopped trying when I could not get into download mode or recovery mode. The last option I have is a USB jig, but the thing is I don't have it and I will need to buy it from abroad if I want it.
Some more information: When I try to put it in download mode, it gets in a boot loop (I see the AT&T logo and then reboots), the boot loop stops when I leave the buttons. And also when I switch on the phone, it does display the battery charging animation.
And also I've heard some people saying that it might be because I flashed some incompatible kernal or something. (This might be true, because I also don't remember what I did to flash the ROM )
So, I want to fix this now because I want to update my phone to the CyanFox 4.3 ROM which seems very cool . Is there anyway I can fix this recovery mode or download mode on this phone so that I could flash a new ROM to my phone (without the jig if possible)
Thank you lots peeps.
vinte007 said:
Hello XDA peeps,
So here is my situation, some days ago (like 3-4 months ago) I installed CM 10.1 on my Captivate. Everything went well and I can even open my phone and use it. But the problem was, after installing that ROM, I no longer can get into recovery mode or download mode. I tried everything possible, the button combo method, button combo and battery pull in method, button combo and USB pull in method and also tried ADB "restart recovery / reboot download" I think, (does not remember because it was 3-4 months ago). Tried everything correctly and stopped trying when I could not get into download mode or recovery mode. The last option I have is a USB jig, but the thing is I don't have it and I will need to buy it from abroad if I want it.
Some more information: When I try to put it in download mode, it gets in a boot loop (I see the AT&T logo and then reboots), the boot loop stops when I leave the buttons. And also when I switch on the phone, it does display the battery charging animation.
And also I've heard some people saying that it might be because I flashed some incompatible kernal or something. (This might be true, because I also don't remember what I did to flash the ROM )
So, I want to fix this now because I want to update my phone to the CyanFox 4.3 ROM which seems very cool . Is there anyway I can fix this recovery mode or download mode on this phone so that I could flash a new ROM to my phone (without the jig if possible)
Thank you lots peeps.
Click to expand...
Click to collapse
Download and recovery mode aren't affected by ROM flashing. If you can run your phone just fine, then your kernel is fine.
Now my guess is that one of your button isn't working properly, or that you're using the wrong combo. That being said, when you hold the power button (while phone is powered on), you should have an extended menu that gives you the option of booting in recovery or download mode, have you tried those?
As for a jig, you can make one if you don't wanna order one. It's fairly simple and we have a guide in here on how to for just a couple bucks.
BWolf56 said:
Download and recovery mode aren't affected by ROM flashing. If you can run your phone just fine, then your kernel is fine.
Now my guess is that one of your button isn't working properly, or that you're using the wrong combo. That being said, when you hold the power button (while phone is powered on), you should have an extended menu that gives you the option of booting in recovery or download mode, have you tried those?
As for a jig, you can make one if you don't wanna order one. It's fairly simple and we have a guide in here on how to for just a couple bucks.
Click to expand...
Click to collapse
Thank you for your reply. Yes I did try that also. But it just does a normal restart. I tried the the ADB "reboot recovery" also. It also didn't help. I even downloaded an app to reboot into recovery, but no help.
And yesterday I got a jig from my friend, it worked on his infuse but did not work on my Captivate. He said that it might be because he is using a 330K resistor. So I ordered a jig from ebay. It will take some time to reach here.
Is there anything else I can try? maybe push a recovery or something using ADB? Sorry if I am being noob here
Once again, thanks for your support.
At this point i would just wait for the jig. And yes, Samsung galaxy jig requires 301k.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
At this point i would just wait for the jig. And yes, Samsung galaxy jig requires 301k.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ok, I will wait for the jig and when I get it, I will post the result.
Once again Thank you for your help
Aaaand all of a sudden I was wondering, can this be a bootloader problem? Maybe my bootloader got locked somehow or something?
The best thing is still to wait for the Jig or make one, as BWolf56 suggested.
Once ya have the Jig and If u can get into Download Mode with it, I suggest that u flash the One Click Odin or Heimdall Stock Android 2.3.5 i897uckk4 that includes the Bootloaders. (See the stickied One Click thread in the Dev forum, Post #3). If that is successful, do not flash any Bootloaders again. U can then proceed to flash the KK4 Corn Kernel, the .tar version of the kernel v7.0A, through Odin and then use that CWM Recovery that is baked into that kernel to go on flashin other Roms, etc.
If u cannot get into Download Mode with the Jig, then ur micro usb port of ur phone may be the fault. (But still an app should work from the play store to reboot to download or recovery)...anyway that is all i got for now.
Keep us posted.
Sent from my SAMSUNG-SGH-I747 using Tapatalk