Which firmware is the most stable and bugless version of gingerbread 2.3.3 for galqxy tab?
Sent from my GT-P1000 using XDA Premium App
As far as custom roms for the 1000, overcome is the way to go.
Sent from my "better than an iPad" tab... Running Overcome GINGERBREAD!!!
If stock rom?
Sent from my GT-P1000 using XDA Premium App
Mine's DXJPE latest Official Stock Asian ROM...
Is this question treat OK? If I'm not mistaken, to compare a rom to others rom is against the rule right?
Im not comparing. Im asking which stable stock GingerBread 2.3.3 ROM is good so that I can use.
naimmkassim said:
Is this question treat OK? If I'm not mistaken, to compare a rom to others rom is against the rule right?
Click to expand...
Click to collapse
Why do I constantly see people call a normal post a treat...
Sent from my "better than an iPad" tab... Running Overcome GINGERBREAD!!!
naimmkassim said:
Is this question treat OK? If I'm not mistaken, to compare a rom to others rom is against the rule right?
Click to expand...
Click to collapse
The rule is for roms made by developers. No nasty gossip will hurt samsung's fellings!
DXJPI latest Asian ROM for stock... Overcome 3.1.0 Kratos for custom... so it simply depends on what flavor you want...
Sent from my GT-P1000 using Tapatalk
Related
Hi,
Is it possible to upgrade with the recently leaked European Gingerbread 2.3.4 image to the Bell's Vibrant I9000M?
I'm currently running Froyo 2.2, firmware UGKC1. Have downloaded the official 2.3.4 from samfirmware.com and already rooted and unlocked my phone.
gurwindersng said:
Hi,
Is it possible to upgrade with the recently leaked European Gingerbread 2.3.4 image to the Bell's Vibrant I9000M?
I'm currently running Froyo 2.2, firmware UGKC1. Have downloaded the official 2.3.4 from samfirmware.com and already rooted and unlocked my phone.
Click to expand...
Click to collapse
It is... i would suggest going this route instead of through the one from samfirmware.
I use darky's ROM. I upgraded to 10.1 (it is 2.3.3), then recently upgraded via CWM to Dark Core 2.7.3 (which has the 2.3.4 GB firmware). Beware that the core is beta at this time, and so far in 2 days i haven't had any real issues on my phone.
www.darkyrom.com, then check the forums.
We are quite in Sync. Co-incidentally I upgraded to Darky's ROM(10.1) about an hour back. I'll give a try to the Beta now. Pls do share your experience with the beta overtime.
Thanx
gurwindersng said:
We are quite in Sync. Co-incidentally I upgraded to Darky's ROM(10.1) about an hour back. I'll give a try to the Beta now. Pls do share your experience with the beta ove.rtime.
Thanx
Click to expand...
Click to collapse
So far so good... other than my battery. Although i do have a momax 2700mah battery, it only lasted 30ish hours before it died... including using superpower to manage night time usage. I should be getting more than that with this battery (and i have done the reconditioning with the battery since i got it).
Even with 10.1 i got a day and a half or so... but the half day doesn't work for me as i need it for a full day.
Now that i've done one round of recondition on my battery, i'm anxious to see how good the battery will last now.
10.1 works with the JVP kernel fine (at least some of the features for it). I had to upgrade gtalk to the video talk version myself though (although i'm sure it'll be included in the next darkyrom).
Let me know what you think of it...
Hey guys i am also on the I9000M through bell and would love to get the gingerbread on here but the last time i tried i couldnt connect to my 3g for wireless and i couldnt call out or recieve calls please tell me the guide you used because man that gingerbread was fast and smooth.
Right now heres what my phone status is
Model number GT I9000M
Firmware version 2.2
Baseband version I9000UGKC1
Kernel version 2.6.32.9
[email protected] #4
Build number FROYO UGKC1
Thanks in advance for any help
ps my phone is already rooted
you can get gingerbread, but you need to take the extra step of flashing the kc1 modem, or do the 850 band tweak on a euro modem
Sent from my GT-I9000 using XDA App
And is there a tutorial for that?
And thanks.
Sent from my GT-I9000M using XDA App
bambam1978 said:
And is there a tutorial for that?
And thanks.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Just flash kc1 in odin or search for 850 enabled modems.
Swyped from a galaxy far far away.
Can i fladh it with cwm and if i have to use odin which slot does it go in?
Thanks for the response.
Sent from my GT-I9000M using XDA App
bambam1978 said:
Can i fladh it with cwm and if i have to use odin which slot does it go in?
Thanks for the response.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Yes perka has a cwm flashable kc1 modem. If you use odin it goes in the phone column.
Swyped from a galaxy far far away.
YEEESSSSSSS I finally got exactly what I wanted! Thank you everyone!!!!
Sent from my GT-I9000 using XDA App
I want to upgrade my Samsung Galaxy s Vibrant BELL to Gingerbread 2.3.4
Can some one help me,
I want to upgrade my Samsung Galaxy s Vibrant BELL to Gingerbread 2.3.4
I need instruction and right tools to download for upgrading
I need instruction and right tools to root my phone
I need instruction and right tools to flash my phone.
joelhon said:
Just flash kc1 in odin or search for 850 enabled modems.
Swyped from a galaxy far far away.
Click to expand...
Click to collapse
Do you do the KC1 modem AFTER the GB firmware flash or during?...
ccrows said:
Do you do the KC1 modem AFTER the GB firmware flash or during?...
Click to expand...
Click to collapse
I could say after if you using Odin.
But before starting ask yourself what do you really want....
Just the 2.3.4 stock or a custom rom (like Darky's), rooted?, Aply a new theme?
ENO_qc said:
I could say after if you using Odin.
But before starting ask yourself what do you really want....
Just the 2.3.4 stock or a custom rom (like Darky's), rooted?, Aply a new theme?
Click to expand...
Click to collapse
So far just the stock. I'm growing impatient waiting around for Bell...
Sent from my MB860 using XDA Premium App
Actually I just want 2.3.4 with BLN and I would be happy...
Sent from my MB860 using XDA Premium App
ccrows said:
Do you do the KC1 modem AFTER the GB firmware flash or during?...
Click to expand...
Click to collapse
Anyone?...
Sent from my MB860 using XDA Premium App
ccrows said:
Anyone?...
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I answered you two post ago.....
Sent from my GT-I9000 using Tapatalk
Do you have to be on a froyo firmware to flash cyanogenmod7 and miui?
Thanks
Sent from my GT-I9000 using XDA App
Yes, but more specifically froyo bootloaders. Miui does to as it is based on CM7. There are heaps of guides around that include instructions on how to go to Miui or CM7. This one explains how to go to CM7: http://forum.xda-developers.com/showthread.php?t=1101534[/URL
And this one for Miui: [URL="https://docs.google.com/document/pub?id=1ItSONRa9nzI7MKeKqwIdHCTRA3RRiOM_6LcJGnK4p6Y&pli=1"]https://docs.google.com/document/pub?id=1ItSONRa9nzI7MKeKqwIdHCTRA3RRiOM_6LcJGnK4p6Y&pli=1
seeraj15 said:
Do you have to be on a froyo firmware to flash cyanogenmod7 and miui?
Thanks
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Ezbase 2 is the best start point for a journey to cm7, why not try insanity cm? Come join the insane
GTi9000 insanity cm012/glitch
I will after I have used darky's for a.little longer. The roms I have tried are gingerreal and darky's 10.1. The roms I have tried are dark core and the one that came with gingerreal and I can't tell a difference in nh the.performance.
Sent from my GT-I9000 using XDA App
I think I will stick with darky as I found that battery life is quite a bit better on gingerbread than froyo
Sent from my GT-I9000 using XDA App
Yes, if you want to have a good battery life, you shouldn't use CM7 or MIUI. Cause if cmpare battery life to Samsung-based ROMs it's not so good (but it's getting better from day to day ).
So which other roms can I flash straight away which are gingerbread based other than darkys and gingerreal?
Sent from my GT-I9000 using XDA App
Just look in the 'Galaxy S Android Development' section.
Take a look at
http://forum.xda-developers.com/showthread.php?t=886000
Salve XDA Devs !
Firstly, thank you for all the useful stuff in the forums
Now i want some suggestions, wich is the best stock 2.2/2.3 ROM ?
Thank you !
Either Cyanogenmod or Tornado Rom
Sent from my GT-I9000 using XDA Premium App
CM7 or (Galnet's) MIUI.
i said stock rom
Darky's 10.2 RE
ppl i said stock :|
i want an official 2.2 or 2.1 or even 2.3
Stock is crap.
But if you really like stock, then 2.3.4.
Sent from my Transformer TF101 using XDA Premium App
Jetpack Rom with TalonDev
B3nnyTh3KiD said:
Jetpack Rom with TalonDev
Click to expand...
Click to collapse
He wants a STOCK-ROM, no customised stuff!!!
cm7 or stock samsung for me . room cooked bad
If you really want to use stock ROM go for XXJVR
Hello fellow note users....
I will be going away for a few days, no wifi and a rubbish data package, and quite a bit of time away from charger....so....
Is it worth upgrading to 4.0.4 from 4.0.3?
BEST kernal? Have been using the notecore kernal
Stock or custom?
Whats the major differences between the
ics versions?
Where can i find stock 4.0.4 lol?
Thank you all!!!!
-GARY
Sent from my GT-N7000 using xda premium
biggary said:
Hello fellow note users....
I will be going away for a few days, no wifi and a rubbish data package, and quite a bit of time away from charger....so....
Is it worth upgrading to 4.0.4 from 4.0.3?
BEST kernal? Have been using the notecore kernal
Stock or custom?
Whats the major differences between the
ics versions?
Where can i find stock 4.0.4 lol?
Thank you all!!!!
-GARY
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
It is worth upgrading to 404 as battery life is better, transitions and window animations are smoother than 403.
I'm using CF Root 5.6 LRG kernel and stock odex rom with some bloatware removed.
Well its my personal experience.
You'll sure hear some people advise you to downgrade to GB :silly:
You can download 404 with Check Fus Downlaoder.
Is that kernal safe???
Sent from my GT-N7000 using xda premium
Q: Is it worth upgrading to 4.0.4 from 4.0.3?
A: Yes
Q: BEST kernal? Have been using the notecore kernal
A: There is no best kernel
Q: Stock or custom?
A: Whatever floats your boat.
Q: Whats the major differences between the ics versions?
A: Exactly 0.0.1
Q: Where can i find stock 4.0.4 lol?
A: Link
Edit:
biggary said:
Is that kernal safe???
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
No ICS Kernel is 100% safe.
When performing a Full wipe (Data/Cache), always flash the Abyss 4.2 Kernel first And reboot back into recovery!!!, and then wipe.
and what's the relevance between you going away and the urgent itch to upgrade?
No reason to upgrade lol....i just a flashaholic
Sent from my GT-N7000 using xda premium
@kaukassus.... Not a link for uk 4.0.4
Sent from my GT-N7000 using xda premium
biggary said:
@kaukassus.... Not a link for uk 4.0.4
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Its not officially released yet i think
Sent from my GT-N7000 using XDA Premium App
biggary said:
Is that kernal safe???
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Regarding CF Root 5.6 kernels. Samsung has released new sources but we still do not know if brick bug is fixed.
Better safe than sorry - always use GB kernels to be 102% sure and safe.
biggary said:
@kaukassus.... Not a link for uk 4.0.4
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Then 4.0.4 is not officially released in the UK yet.
How can I upgrade from 2.7.6 HYBRID_TMT_MIUI_1.0 BETA 6 international with CF 5.6 kernel?
Thanks
remolo said:
How can I upgrade from 2.7.6 HYBRID_TMT_MIUI_1.0 BETA 6 international with CF 5.6 kernel?
Thanks
Click to expand...
Click to collapse
I do not know if CF Root is compatible with MIUI.
Flash CFR 5.6 with mobile odin.
use only the kernel that came with the firmware, i doubt also that other kernels will work with MIUI.
Sent from my GT-P1010 using xda app-developers app
Gonna try paranoid android v5
Well, I recently got a SGH-i987 Samsung Galaxy Tab 7 inch and was wondering if it was the same as the one discussed in this section.
AT&T
GT-P1000
2.2 Firmware Build Number FROYO.XXJK5
Baseband I9000UGJK3
Kernel 2.6.32.9 [email protected] #1
I believe I did the mod to get the phone app on it to let it call as well if that matters.
Anyway, was wondering how I'd get a custom firmware on it...if at all. Don't really care if it loses 3G stuff. As long as it has Wifi at least.
Using the Overcome Guide, I've gotten to the Overcome ROM on Gingerbread. Is there any way I can get to ICS or JB now though?
Yes. Yours is P1000. Too many threads in dev section to follow. Just go for alroger's cm10.1 if you want, or AOKP soon ( I am on test release of stimpz0r's AOKP JB, can't tell you how good it is). But rest asssure it will be great.
Sent from my GT-N7100 using xda app-developers app
priyana said:
Yes. Yours is P1000. Too many threads in dev section to follow. Just go for alroger's cm10.1 if you want, or AOKP soon ( I am on test release of stimpz0r's AOKP JB, can't tell you how good it is). But rest asssure it will be great.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I've gotten to Miui v4 on http://forum.xda-developers.com/showthread.php?t=1613842 now from Overcome. So I guess my last question really is whether I need to go back to Overcome v4 Gingerbread like my second post THEN JB...and again for any other ROM, or if there is anything else special I need to know.
Hmm. It is an MTD ROM. This MIUI Rom was made around the time the newer MTD layout was introduced.
Can't remember if it uses the older or current layout. Ask Ronak or just restock.
Sent from my GT-N7100 using xda app-developers app