Hi. I am having this weird problem with my Android Kaiser. After switching to Android, I am not happy with my kaiser. The camera doesnt work, the dialer lags 2-3 seconds after pressing and its really slow. So I wanted to switch back to WM6.
Now, when I go back to my tri-color bootloader, and try to flash the WM6 ROM from there, it goes 'loading' and stays like that ! I tried another official ROM and the result is the same !!
I tried MTTY, but doesnt work.
I really need some help please !! please please please help !!
Have you searched, I've seen tons of this threads here. Please post in one of them. On that note, thread closed.
Related
Guys I have a big problem, please try to help me.
Ive been having my Touch Diamond for over a year now. I started to flash it 6month ago. I followed all the steps with Hard SPL and radio and then ROM.
I have been using BSB6.5 roms since the first day. But now recently when I upgraded to bsb6.5.1b, my phone after a couple of hours or (if am lucky) one day hangs, then I soft reset it then it takes long time to start then suddenly ALL applications and programs in the phone starts and then the phone warns me about program memory and then it hangs. I tried to flash over and over again but the problem still come back. Could someone please help me ? Someone had the same problem?
(I ALREADY SEARCHED FOR A THREAD WITH THE SAME PROBLE)
wow that is strange, try going back to a wm 6.1 rom than back to your 6.5 roms. Sometimes this causes quite a few weird problems like yours.
and remeber to hard reset at least twice between roms
I´ve read before in a thread how to reset the phone (boot, Hardspl, rom) back to its original form/condition. I tried to search and find that thread but i couldnt find it. Do you got an idea where I can find it ? I thought maybe I can try to do everything from scratch will help.
Is this wot you need big http://forum.xda-developers.com/showthread.php?t=537496
ooh yes...thanks man appreciate
i would recommend you try the mtty method once:
http://forum.xda-developers.com/showthread.php?t=540290
good luck
yeah he has a point big, use mity to format your device, maybe you solve the problem without having to flash stock spl
Hello
I've tried some roms that i download from here and i had a lot of problem with all of them.
problem in graphics problem with the phone the get stuck a lot even the phone doesnt work.....
WIFI and BL working but phone is not.
Anyone know how can i put this operation system without probs?
Thank
Installing new ROMS, make sure you hard reset right after the phone reboots from a fresh ROM Load. People have noted here that problems almost always surface without the Hard Reset on a fresh ROM.
Try it and let us know
Yea i did it and it wont work and when i triend to put the older version 6.1
it do the same Graphic probs
The big problem is that he dont recognize the Sim phone it wont connect .
Sorry And also the button isnt working too sometimes.... im in trouble anyone?
a very basic question: the SPL version currently on your phone?
Wow, dude read the dummies guide, please. The stickies are there for a reason!
http://forum.xda-developers.com/showthread.php?t=505377
As above 2 posts it sounds like a common issue with SPL's not matching. Read dummies guide thread (post above) and post further queries in that thread
Thread closed
Hi guys!
I have been trying everything that I could find on XDA to fix my problem.
I got this HTC clone a few weeks ago, and it was working fine.
I decided to install a UI on it and it worked fine. After a while I got bored of the UI, so I decided to uninstall it. After the uninstall, the device indicated that it needed to be restarted. I did that, but after it rebooted, it started to reinstall Windows Mobile 6.1. I was annoyed by this, but was like, whatever, and let it continue.
Where the real problem started was when the device froze up (I left it alone for over an hour, but there was no change).
I then had to pull the battery. After I put the battery back into the T5355 it just keeps getting stuck on the "TOUCH Diamond2" screen.
I tried all the hard reset and soft reset tricks I could find and have no been able to either setting it back to factory or bootloader mode.
I was able to find a post that described how to place the boo.ini, flash.bin, and loader.bin file onto my micro sd card. I was able to to get the boot.ini an flash.bin files, but can't seem to find a loader.bin file (it that the actual OS rom?). I then found a post that showed how to use HiSilicon IDT to force the install of the OS Bin file (C02_HTC_20091102_R2127_英全视角B包.bin).
I followed the instructions on placing the T5355 into "Download" mode and pushing the OS bin fine to it.
I am able get the IDT software to detect the T5355 and start pushing the install, but the damned thing ends up giving an XLDR error.
PLEASE! PLEASE! Somebody help me! This phone is brand new and really want to get it working again.
Model: HTC(?) T5355
Please help me someone!!
Is there anyone out there that can help me???
I am so frustrated and can think of what else to do!
The biggest problem I have is that I can't use ActiveSync. If I could use that I wouldn't have much trouble.
Does anyone know how to use HiSilicon's IDT properly? The instructions I was working off of are in Russian. I think that a need a loader.bin file for the T5355 that I can put on my micro sd card...or maybe not...I don't know.
I just really want to get this device back to factory settings.
Please someone take pity on me!!!
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
I don't think you would be experiencing these problems with an original topaz
Please take care this is a HTC CLONE
Pisca said:
Please take care this is a HTC CLONE
Click to expand...
Click to collapse
oups, I'm high resolution on monitor, I thought it was saying "done" not "clone" ) ... there's a thread dedicated to china clones, look here http://forum.xda-developers.com/showthread.php?t=619643
run with a rom in bootloader, it shud work
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
Click to expand...
Click to collapse
DalvuS, thanks for the reply, but the issue is that I can't seem to get into bootloader mode . I wish I could. The T5355 seems to be stuck in the middle of wm 6.1 install. I need to somehow wipe the install and be able to push a reinstall back to the device.
I don't think you would be experiencing these problems with an original topaz
Click to expand...
Click to collapse
Exca that comment doesn't help me. It just makes me more sad. I was gipped when I bought the phone . I thought I paid for a "real" Diamond 2.
If you can't to catch the bootmode, looks like hardware problem.
You can't to repair it at home, imho. Try the specialized service.
..............
... and: are you sure about key combination for bootloader screen for CLONE?
Hello people, how can i dump my rom from my phone (mfu w71) for backup, because i cannot find any rom in english only in chinese. I started to dump the chinese rom with some chinese kitchen (K3系列ROM工具), but i'm stuck. I do not know to do anymore i have extracted ROM, SYS folder. I think it would be good to start another section on this forum for the chinese phones.
Some help from experienced cookers would me be much apreciated.
My T5355 is up and working!!!
Thanks to everyone who replied to my post!!!
I discovered that the problem was that the PC I was attempting the install from was running an AMD based processor.
I tried on the family laptop (which runs an Intel processor) and the install worked!
I AM SOOOO HAPPY!!!
b0gdi good luck with your issue. Try doing a search here in XDA for "dump my phone".
nothing[switched off] -> press start -> command -> bootloader -> bootloader commands -> system start -> play
checking one by one by interfering would have done the trick
I'm glad to hear that... so now you're ok
NEXT !
help me please
i Have Flash my phone 100 times with IDT for WM6.5 and WM6.1 all the versions my phone is T5355 Hot D2 but in one day i flash a rom that kill my phone the phone are conntinue to work but no screen picture only light i have try some russian Rom that kill my phone
the phone was been on guerant so i send him back to my supplier thay fix the phone but the factory said that thay need to change the screen so now thay really change the screen and the phone back to me with WM6.1 some New version 20.1.2010 some think like this i have made a call but the phone hang up and not make calls so i try to put him Back the WM6.5 English ROM that i use with this phone before i try to Flash Russian ROM that brake me the picture of the phone and block me the Bootloader Combination of SEnd+End+Power so that way i send him to repair .
so i try the English Rom that i have use before he DOwnload the Flash Fine but now the screen are stop to show picture But the Bootloader are work fine
so i try all the Roms that i have and all the same the screen dont want to show picture
some body have a same problem or can help me with this ?
After flashing athenarom, a winmob 6.5 rom, when i turn on my phone, it doesn't go further than the touch diamond screen. HELP PLEASE ?????!!!!!!
I think you bricked your phone look up on google how to un-brick a phone or try go to theunlockr.com
Haha, I figured it out. I just did a hard-reset and now it works !
Please help me how to reset my phone. i have wm6.5 then i install htc keypad + keyboard, then when i reset the phone, only smart mobility appears on the screen and nothings happen... please help.. i really need my phone...i try to connect it to my laptop but it is always not connected maybe because it stop on opening screen and after a while lines appears.. does anyone knows how to super reset the phone without any pc syncronization.. cannot detected... please please help ..thanks in advance....
Looks like you need to hard reset your phone. Follow the instructions in this link:
http://www.hardreset.eu/htc_touch_viva_opal_hard_reset_soft_reset_en.html
And don't try to install HTC keyboard or keypad on WM6.5 ROMs because they need to be bundled with the ROM by a chef. Try using "Finger Keyboard" instead.
Good luck..
hi GFX,
Thank you so much...my phone is now working...i will do your advice... thanks a lot
Could u post a vid on how to do it