Please help me how to reset my phone. i have wm6.5 then i install htc keypad + keyboard, then when i reset the phone, only smart mobility appears on the screen and nothings happen... please help.. i really need my phone...i try to connect it to my laptop but it is always not connected maybe because it stop on opening screen and after a while lines appears.. does anyone knows how to super reset the phone without any pc syncronization.. cannot detected... please please help ..thanks in advance....
Looks like you need to hard reset your phone. Follow the instructions in this link:
http://www.hardreset.eu/htc_touch_viva_opal_hard_reset_soft_reset_en.html
And don't try to install HTC keyboard or keypad on WM6.5 ROMs because they need to be bundled with the ROM by a chef. Try using "Finger Keyboard" instead.
Good luck..
hi GFX,
Thank you so much...my phone is now working...i will do your advice... thanks a lot
Could u post a vid on how to do it
Related
I REALLY NEED HELP...
i was updating the rom to 2.21 and i guess i accidently closed the program.. sooo now my phone turns on to this screen.. it shows 3 colors.. i can not do anything..
i really need help.. what can i do to go back?
Ok, there's a chance that you just turned your phone into a nice little paperweight however, I recommend trying two things. First, try to perform a hard reset by following these steps:
1: Press and hold both the Comm Mannager Button and the Voice Command Button
2: While keeping those two buttons pressed, press the Reset Button with your stylus
3: After about a second you will be prompted for confirmation. Press the Talk Button to confirm
If that fails, try performing the ROM upgrade again. If THAT fails...well either my assumption is correct or you're gonna need someone more proficient than me to help you ^_^
i tried doing that.. that didnt work..
when you try to install the rom again.. the phone has to be connected with active sync.. and right now its not.. but if u look at the screen on the phone.. it says usb.. but it doesnt connect..
so idk what to do now..
i have another mda..
this one has the original ROM and it works.. is there anything i can do?
please help
harut9161 said:
i tried doing that.. that didnt work..
when you try to install the rom again.. the phone has to be connected with active sync.. and right now its not.. but if u look at the screen on the phone.. it says usb.. but it doesnt connect..
so idk what to do now..
i have another mda..
this one has the original ROM and it works.. is there anything i can do?
please help
Click to expand...
Click to collapse
If you have the bootloader screen(rainbow) it should be retrievable.
Just to be sure you enter the bootloader screen hold camera button and turn on.
The device should be able to connect to your pc, but not by activesync.
If it wont try disabling any firewalls or antiviral on the pc and try again.
Once the pc recognizes your device - run the rom upgrade again.
Fan-freaking-tastic!!!!
Thanks meschle !!!!
I had loaded a cingular rom onto a tmobile thinking all HTC roms should work alike (i know idiot sign is already on my forehead) and the phone was working but very slowly and sync did not work...
I checked and I could get to the bootloader screen (rainbow) as you suggested and then was able to load the original firmware just fine... Phew.. Saved my having to explain a $500 brick to folks.. lol
I have a question on this however, if I want to upgrade the radio or something other than T-MOBILE rom.. what do I need to look for to be sure it will work on my T-MOBILE ?
Cheers
and Thanks
Hi guys!
I have been trying everything that I could find on XDA to fix my problem.
I got this HTC clone a few weeks ago, and it was working fine.
I decided to install a UI on it and it worked fine. After a while I got bored of the UI, so I decided to uninstall it. After the uninstall, the device indicated that it needed to be restarted. I did that, but after it rebooted, it started to reinstall Windows Mobile 6.1. I was annoyed by this, but was like, whatever, and let it continue.
Where the real problem started was when the device froze up (I left it alone for over an hour, but there was no change).
I then had to pull the battery. After I put the battery back into the T5355 it just keeps getting stuck on the "TOUCH Diamond2" screen.
I tried all the hard reset and soft reset tricks I could find and have no been able to either setting it back to factory or bootloader mode.
I was able to find a post that described how to place the boo.ini, flash.bin, and loader.bin file onto my micro sd card. I was able to to get the boot.ini an flash.bin files, but can't seem to find a loader.bin file (it that the actual OS rom?). I then found a post that showed how to use HiSilicon IDT to force the install of the OS Bin file (C02_HTC_20091102_R2127_英全视角B包.bin).
I followed the instructions on placing the T5355 into "Download" mode and pushing the OS bin fine to it.
I am able get the IDT software to detect the T5355 and start pushing the install, but the damned thing ends up giving an XLDR error.
PLEASE! PLEASE! Somebody help me! This phone is brand new and really want to get it working again.
Model: HTC(?) T5355
Please help me someone!!
Is there anyone out there that can help me???
I am so frustrated and can think of what else to do!
The biggest problem I have is that I can't use ActiveSync. If I could use that I wouldn't have much trouble.
Does anyone know how to use HiSilicon's IDT properly? The instructions I was working off of are in Russian. I think that a need a loader.bin file for the T5355 that I can put on my micro sd card...or maybe not...I don't know.
I just really want to get this device back to factory settings.
Please someone take pity on me!!!
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
I don't think you would be experiencing these problems with an original topaz
Please take care this is a HTC CLONE
Pisca said:
Please take care this is a HTC CLONE
Click to expand...
Click to collapse
oups, I'm high resolution on monitor, I thought it was saying "done" not "clone" ) ... there's a thread dedicated to china clones, look here http://forum.xda-developers.com/showthread.php?t=619643
run with a rom in bootloader, it shud work
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
Click to expand...
Click to collapse
DalvuS, thanks for the reply, but the issue is that I can't seem to get into bootloader mode . I wish I could. The T5355 seems to be stuck in the middle of wm 6.1 install. I need to somehow wipe the install and be able to push a reinstall back to the device.
I don't think you would be experiencing these problems with an original topaz
Click to expand...
Click to collapse
Exca that comment doesn't help me. It just makes me more sad. I was gipped when I bought the phone . I thought I paid for a "real" Diamond 2.
If you can't to catch the bootmode, looks like hardware problem.
You can't to repair it at home, imho. Try the specialized service.
..............
... and: are you sure about key combination for bootloader screen for CLONE?
Hello people, how can i dump my rom from my phone (mfu w71) for backup, because i cannot find any rom in english only in chinese. I started to dump the chinese rom with some chinese kitchen (K3系列ROM工具), but i'm stuck. I do not know to do anymore i have extracted ROM, SYS folder. I think it would be good to start another section on this forum for the chinese phones.
Some help from experienced cookers would me be much apreciated.
My T5355 is up and working!!!
Thanks to everyone who replied to my post!!!
I discovered that the problem was that the PC I was attempting the install from was running an AMD based processor.
I tried on the family laptop (which runs an Intel processor) and the install worked!
I AM SOOOO HAPPY!!!
b0gdi good luck with your issue. Try doing a search here in XDA for "dump my phone".
nothing[switched off] -> press start -> command -> bootloader -> bootloader commands -> system start -> play
checking one by one by interfering would have done the trick
I'm glad to hear that... so now you're ok
NEXT !
help me please
i Have Flash my phone 100 times with IDT for WM6.5 and WM6.1 all the versions my phone is T5355 Hot D2 but in one day i flash a rom that kill my phone the phone are conntinue to work but no screen picture only light i have try some russian Rom that kill my phone
the phone was been on guerant so i send him back to my supplier thay fix the phone but the factory said that thay need to change the screen so now thay really change the screen and the phone back to me with WM6.1 some New version 20.1.2010 some think like this i have made a call but the phone hang up and not make calls so i try to put him Back the WM6.5 English ROM that i use with this phone before i try to Flash Russian ROM that brake me the picture of the phone and block me the Bootloader Combination of SEnd+End+Power so that way i send him to repair .
so i try the English Rom that i have use before he DOwnload the Flash Fine but now the screen are stop to show picture But the Bootloader are work fine
so i try all the Roms that i have and all the same the screen dont want to show picture
some body have a same problem or can help me with this ?
Hello. Yesterday morning when i woke up suddenly my touch screen did not respond any more. I try reinstalling windows or hard reset but now i can not even get over tap the screen.Please help me. You already helped me once when i was going to throw it away because i thought it's a hardware problem and it was a software one.I did the soft reset and leave it for a day then it worked but when i wanted to charge, it happened again and i have the same problem now.Any way a thing it's certain it is a software problem.If you have other advice please help.
another problem
I tried installing lots of roms hoping it will be fine. but now i installed a 6.1 version of wm and when i try installing wm 6.5 it stopes in loading screen and the pc gives me an error conection.What about this?
Moved as not ROM Development.
Place a welcome.not file on root of storage card can be a .txt file but change the extension doesn't want to be welcome.not.txt this will get you past all the configs on setup.
Please be more specific
Where can i find a welcome.not file?
linucu said:
Where can i find a welcome.not file?
Click to expand...
Click to collapse
You make it out of a .txt file
Have done it 4 u.
Thank you but that was not the problem
I did as you said and it worked but that was not the problem.The problem is my touch screen not responding.And it's not a hardware problem because if i did as i have been told to fully charge the phone, then do a soft reset and leave it for a day it was as new.But when i try to charge it again i got the same not responding screen. Now after all this i have another issue and that is when i try doing a soft reset the phone resets and it sopped on gray screen with Loading... and the pc gives me error connection. So i get this only i put a 6.1wm. Is this the reason for not letting me change the wm to 6.5 one? i will go crazy with these strange things that are science but have no explanation. Where is the science then? What you did was to allow me to use the phone without touch screen. Well...thank you, but i know there is a way to get the phone normal again and that is what i need you to help me with. Thank you. Catalin
Are you Hard-SPL'd?
Regards problem if software then flashing a different ROM even stock should be able to tell you, i know you think not hardware but if repetitive then maybe you just fluked the being ok again.
Anyway flash another stock ROM, then if fine flash a 6.5, you don't have to use computer as can flash via SD.
First of all thank you
Thank you because you try to help but please talk so i can understand. What is stock rom?
"even stock should be able to tell you" what is stock?
And now i have another one. It can not connect to active sync.
tell me please how can i Flash form SD?
I can not insatll anything from pc
So i don't understand why it does not allow me to do anything like hard spl, or flash rom, or anything to install from pc. It connects to active sync and lets me access the card but when i try installing something it stops.
never mind,
I manage to reset it Holding the VOL + RED + POWER
which gets you to the hard reset green screen.
still need to coke this phone with a better rom.
anyone know which one is the best and had hebrew?
=====================================================
can anyone tell me please how to hard reset this phone?
I tried to install hebrew langauge (eyron) and the phone don't start.
all I see is the green windows mobile 6.1 screen
please help me!
best regards,
ran
Clear Storage in system is hard reset. Try megade 1.7.5. All working.
mooki9 said:
never mind,
I manage to reset it Holding the VOL + RED + POWER
which gets you to the hard reset green screen.
still need to coke this phone with a better rom.
anyone know which one is the best and had hebrew?
=====================================================
can anyone tell me please how to hard reset this phone?
I tried to install hebrew langauge (eyron) and the phone don't start.
all I see is the green windows mobile 6.1 screen
please help me!
best regards,
ran
Click to expand...
Click to collapse
hi
u need to search before posting kindly do so
read this : http://forum.xda-developers.com/showthread.php?t=534581
see the 2nd posting i have explained in detail how to hard reset and other things u need to know
Hi. I am having this weird problem with my Android Kaiser. After switching to Android, I am not happy with my kaiser. The camera doesnt work, the dialer lags 2-3 seconds after pressing and its really slow. So I wanted to switch back to WM6.
Now, when I go back to my tri-color bootloader, and try to flash the WM6 ROM from there, it goes 'loading' and stays like that ! I tried another official ROM and the result is the same !!
I tried MTTY, but doesnt work.
I really need some help please !! please please please help !!
Have you searched, I've seen tons of this threads here. Please post in one of them. On that note, thread closed.