Hello,
I bought a Nexus one brand new from Amazon.
I accidentally dropped it onto a concrete floor.
After I dropped it, the camera stopped working(the led flash would flash at random times) and every time I called the screen would shut off and would never turn back on(had to do battery pull).
The led flashing at random times was getting annoying, so I covered the back with electrical tape. As soon as I did this, I noticed everything started to work again - including the camera. So I cut little slits in the electrical tape for camera flash and camera lens and this is how I have been using it for the past few weeks.
But today, I dropped it again and the same problem is back. No amount of electrical tape seems to fix it. I might try again and tape more strongly.
I can live with a broken camera and since I covered the flash with electrical tape, the random flashes won't bother me.
But the phone screen going off during a call and not turning back on is a problem that i have to fix. I simply cannot battery pull and restart the phone every time i make a call. Also during the phone call, when the screen turns off, I have tried: raising the volume button, pressing the power button, and touching the trackball - nothing works to bring it back on.
I tried various market apps for disabling the proximity sensor but nothing works
I am on 2.3.4 stock ROM but I can easily root. Is there any hope or do I have to buy a new phone?
look at my posts, i posted a way to disable the sensors.
anyway you have to send it to RMA. I did it with mine with the same problem.
pinkster said:
look at my posts, i posted a way to disable the sensors.
anyway you have to send it to RMA. I did it with mine with the same problem.
Click to expand...
Click to collapse
there some scratches on it including a cracked camera lens.
i don't want them to send it back when its obvious that it was my fault.
you sure it would be covered in the 1 year warranty?
Just flash stock rom and recovery and send it. You can't loose anything.
If they refuse just tape flash led and disable sensors.
Enviado desde mi Transformer TF101 usando XDA Premium App
Related
Hey guys,sorry for bringing this up.
Whenever i dial,screen goes black and doesn't come back on.
If i place it flat on a table,then it gets lit but as soon as i rotate the device it goes black again.
My HD7 recently started having this problems...
It started happening after i replaced the micro sd inside with a bigger one.
So my concern is that somehow it moved or got dust when i removed the back plastic cover? Where is it placed anyway?
I tried hard resetting 2 times but nothing works. It would be cool if there was a registry or app to take control of it. Can somebody help?
PS. i cannot send it back because i live in Albania (no official htc shops either around here)
Thanks!
Hello,
The proximity sensor is located on the top left of the device, you can see it when viewed under a bright light. Have you applied any screen protectors which can interfere with them? Replacing the sd card should not have any effect on the proximity sensor. When you rotate the device when the call is placed, the screen should go black by default cause of the sensor
@rhn thank you for your reply.
My phone does not have any screen protector or cover of any kind. Also,if i rotate it while in call it still remains black. As soon as i press the call button,screen goes black and wont come back until the call is ended by the person on the other side.
Really really annoying... Oh sometimes it even flashes after the call has ended...
Sounds like a hardware fault ...have you tried updating your rom?You can find a compatible rom in the rom development subforum..
Yep,tried that too. Just updated today and still the same issue.
It also happened after i changed the micro sd,so maybe something has moved in there. There's no other way than try to open the device and check it out,i guess :/
If you can think of something else,let me know
Warranty
Warranty replacement worked for me.
http://forum.xda-developers.com/showthread.php?t=864311
Thanks bofett, i cannot get a replacement. Warranty for this phone was for 5 days!!! (stupid i know....i totally regret picking it up) So that means i'm screwed...
Thank god i still have my great HD2 so i can start opening this phone without fear
Anyone notice their proximity sensor is very flaky?
The screen will not shut off when I close my wallet cover over it. It will shut off when I start talking on the phone, but then will not "wake" when I move it away to hang up. I actually couldnt find anyway to wake it up so i just waited until the other side hung up (it was a recorded msg).
Any ideas? I may just shut off the proximity sensor and wait till I can swap it in store. Of course this was right after i installed a tempered glass screen .... would that impact it at all??thx!
http://forum.xda-developers.com/showthread.php?t=2922645
It seems that certain brands of tempered glass screen protectors are causing the same issue that you describe.
k2buckley said:
http://forum.xda-developers.com/showthread.php?t=2922645
It seems that certain brands of tempered glass screen protectors are causing the same issue that you describe.
Click to expand...
Click to collapse
thanks. mine was from extremeguard. i removed it. wait and see until the next person calls me. i contacted ATT and they said i have 11 days to return it (no exchanges available), and to try a master reset first
didnt seem to work after moving the glass. did a full reset and now it works....
ill try the glass again tomrrow and see if it stops working again. bizarre.
k2buckley said:
http://forum.xda-developers.com/showthread.php?t=2922645
It seems that certain brands of tempered glass screen protectors are causing the same issue that you describe.
Click to expand...
Click to collapse
this fixed the problem. thank you for saving me time and anguish returning the phone
eb50 said:
this fixed the problem. thank you for saving me time and anguish returning the phone
Click to expand...
Click to collapse
You're welcome. I'm glad you got it straightened out
k2buckley said:
You're welcome. I'm glad you got it straightened out
Click to expand...
Click to collapse
My tempered glass has a cutout for the 2 sensors on the left, are there any sensors on the right of the speaker? My proximity sensor also is not working. I will probably return my tempered glass also if this is the case...
This is happening to me and I don't have a screen protector. It's really getting annoying.
I'm having issues as well.... Not using any screen protector or whatsoever...
Yeh same here.. Looks like the sensor is maybe too sensitive. Hope sw can fix this.
+1 for the issue.
Cannot hang up after a call because the screen is black. Have to push the power button to wake it up first.
No screen protector.
mikkelwe said:
+1 for the issue.
Cannot hang up after a call because the screen is black. Have to push the power button to wake it up first.
No screen protector.
Click to expand...
Click to collapse
I just restored a backup of the original rom and the problem went away. So it's probably an issue with cm. Was on cm nightly from 01-13-2014
Did you try going to settings , accessibility , power button ends call, toggle that on and off.
After completing the above mentioned step. Reboot your phone and try making a call. I hope the issue get resolved.
I tried this step on an unrooted phone, which was recieved just yesterday.
I got this fix from some other thread.
Is there a way to turn off proximity sensor without rooting? Looked through setting and must have missed it. Thanks in advance.
Still having this issue as well. I tried toggling the power button option then restarting my phone, it seems to help for a very short period of time (few hours maybe). I have tried several different screen protectors, the most recent ones having a cut out for the sensor and there is a decent gap between the two. Reloaded my phone several times and installed 5.0.1
The sensor doesn't really work to turn on the display when I go to pickup the phone and is spotty when making a call. In the first minute or so of the call, I can take the phone away from my head and it will register, illuminating the screen, after that it stops working.
I can't understand how it could be the screen protector at this point, it's no where close to obstructing the sensor.
Guess it's time to send this thing back. I must be nuts because I keep trying this power button suggestion and it just doesn't work for me longer than a few hours.
Same here, using a plastic rinkage screen protector no bubbles in it and the edge falls a good few MM from the sensor.
CM12 nightly builds still do it I'm on the 2/19th build with Franco kernel.
Best solution is get rid of the junk and get a Note 4. Mine is such a crap phone. It doesn't even do anything special except be big.
Hi,
Just to tell that I've got this pb since I installed the Spigen crystal protection, not even a tempered glass.
Before that I still had the original cheap film you get when you unbox, with the white corner.. the crystal is really nicer but it screws the sensor...
I believe it is software related. I have a tempered glass screen protector that does not cover the proximity sensor. I have noticed that about 60% of the time the screen does not turn back on when I move the phone away from my head. It seems to happen more when the phone call is longer than one minute. I also had a tempered glass protector that covered the sensor and had the same behavior. I did use an app to test the proximity sensor and with both screen protectors it worked 100% of the time using the app.
Sent from my Nexus 6 using XDA Premium HD app
Anyone else seem to have a problem with the ambient light/proximity sensor on their N6? I've noticed that a lot of times when i make calls, the screen won't shut off when i put the phone to my head... often with that resulting in my cheek touching something, and the person on the other end not being able to hear me. If i leave the phone at an angle against my ear so my cheek doesn't touch the screen, eventually the screen will shut off, but won't come on when i take the phone away from my ear, resulting in me having to press the power button to turn the screen back on.
Had that happen to me yesterday ... Rebooted and it hasn't happened today.
Sent from my Nexus 7 using Tapatalk
I'm having a issue now. Phone call comes in and screen stays on. I did a reboot, factory reset even installed custom ROM. It was working the other day. Anyway to calibrate this thing? Or do we have a bad sensor.
Also now my phone won't rotate screen.
Sent from my Nexus 6 using Tapatalk
Do any of you happen to have a screen protector on? As there have been some users that have been reporting issues with certain screen protectors. I believe most are tempered glass protectors that are the cause of the problems.
I took mine off and still nothing.
Sent from my Nexus 6 using Tapatalk
v4npro said:
I took mine off and still nothing.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Did you try going to settings , accessibility , power button ends call, toggle that on and off.
We own two new Nexus 6 devices that are rooted and decrypted. We have the same issue where the phone screen stays on during a call. Rebooting fixes for a short period (hours or so) but the problem comes back. Other threads show this to be an issue with other phones (nexus 5) with Lollipop. Not sure of a fix. These devices are only a few weeks old so it is not a dust issue.
Having the same issue that just suddenly started. Rebooting does not seem to help.
Happening here too. Frustrating.
My screen turns off when taking the phone to the ear but it doesn't turn on again after i take it away from my ear.
It's pretty bad on my phone. The screen turns on when I am on a call making the notification bar drop down. Also, the phone doesn't wake up when I pull the phone away from my fasce 80% of the time. When I am on a call the phone randomly vibrates like I am getting a notification and when I look I have nothing. With all of this going on, making phone calls on this device is a nightmare.
Restore clean wipe did nothing.
nexus 6
The below mentioned fix is for brand new Nexus 6.
Did you try going to settings , accessibility , power button ends call, toggle that on and off.
After completing the above mentioned step. Reboot your phone and try making a call. I hope the issue get resolved.
I tried this step on an unrooted phone, which was recieved just yesterday.
I got this fix from some other thread.
aditya2529 said:
The below mentioned fix is for brand new Nexus 6.
Did you try going to settings , accessibility , power button ends call, toggle that on and off.
After completing the above mentioned step. Reboot your phone and try making a call. I hope the issue get resolved.
I tried this step on an unrooted phone, which was recieved just yesterday.
I got this fix from some other thread.
Click to expand...
Click to collapse
I'm using an app a Dev created just for this issue and it's fixed.
Nexus 6
Krunk83 said:
I'm using an app a Dev created just for this issue and it's fixed.
Nexus 6
Click to expand...
Click to collapse
What app
Orzly works fine... It doesn't cover the sensor. The Slimwrap orange vinyl (leather) face was a problem for me, had to enlarge the cutout to get suitable performance. I believe the sensor is longer than it is wide, the opposite of the factory cutout? It frames the face of the phone nicely with this screen protector on and I didn't want to take it off. The 24mm added height changes the profile of the phone alot, it no longer rests on the speaker bars/guards. This must also have effected placing the wrap on as well. The larger cutout box for the sesnor is a detractor, but the sensor works 100%. This is good , as it is my intention to run nekid with this phone but its size precludes using a case with any of the pockets I currently own.
fazbender said:
Orzly works fine... It doesn't cover the sensor. The Slimwrap orange vinyl (leather) face was a problem for me, had to enlarge the cutout to get suitable performance. I believe the sensor is longer than it is wide, the opposite of the factory cutout? It frames the face of the phone nicely with this screen protector on and I didn't want to take it off. The 24mm added height changes the profile of the phone alot, it no longer rests on the speaker bars/guards. This must also have effected placing the wrap on as well. The larger cutout box for the sesnor is a detractor, but the sensor works 100%. This is good , as it is my intention to run nekid with this phone but its size precludes using a case with any of the pockets I currently own.
Click to expand...
Click to collapse
Thanks I was just having a crazy time trying to install the front, similar case (glass protector in front) and ended up cutting a hole for the proximity sensor about 2 times the factory height, everything (seems) normal now. I used this program to help make the minimum cut, and align correctly. Did you run into any issues with the thin left & right vertical part of the front cover? Mine seems to "wrap" around the glass protector, not sure if it will stay there though
Android 5.1
Build Su 4tl-44
Camera app version 5.0.21.2
Flash led on my recently bought Droid Turbo stopped working.
It was OK for 5 days. At one night I tried to switch on the flash light to use it as a torch. At first it turned on and blinked three times then went off.
Then I tried again to switch on but the right led just blinked once and turned off. Left led do not have any response.
I switched on the camera and take a picture. Led behaviour was same (right led just blinked once for a short time then switch off while left had no response).
Then I changed the 'Flash' settings in camera from Auto to On and again tried to take a shot but the Led behaviour remains the same.
Any help in this regards would be appreciated...
After googling i found a solution that suggested that draining the battery completely and fully charge after that will solve the problem.
However, i tried this method twice but it did not solve the problem.
Moreover, i tried some typical things like uninstalling the updated camera app to factory.
Factory resetting the phone and clearing the cache from recovery.
But none of the tricks solved the problem...
Now Fingers crossed....
Solved
I had the same problem. It was strictly mechanical.
I removed back panel and clear from dust and it solves it. I recommend to replace 2 sided tape too. MOTO XT1254
Two taped
[/SIZE]
[email protected] said:
I had the same problem. It was strictly mechanical.
I removed back panel and clear from dust and it solves it. I recommend to replace 2 sided tape too. MOTO XT1254
Click to expand...
Click to collapse
The tape actually MUST be replaced because as you said, the flash is a piece connected to the back casing of the phone. If it's not securely connected the insides of the phone, the points that touch the flash board won't be touching consistently and you'll wind up having to take it apart again. You've got to go the extra mile and buy GOOD 2 sided tape as well.. The cheap stuff turns loose as soon as the temperature gets to high or to low. To many people bring their phones in because their fix stopped working.
While pressing both flash LEDs firmly turn on the torch
It's supposed to be water resistant, but I've never dunked it intentionally under water. Bought this in 2017. Unfortunately, I had an accident and it fell inside a sink full of hot water (while I was taking care of a patient) and it stayed there for a minute or two.
What happened are the following:
Power button no longer works - It was a little wonky as it kept turning the screen on and popping up the camera. I tried to turn it off, but it kept turning back on.
Stock camera app - doesn't work anymore. whenever I try to activate the app, it just crashes.
Rear camera hardware - focusing is gone. Using another app (camera zoom fx) I can access it, but pics are blurry. It can't focus on images 12 feet away.
Front cam hardware - there was a mist that fogged the camera. but it seems to be working fine after.
Screen - the screen was relatively ok after the dunking. However, water got inside the S-pen port. I immediately removed it and started drying the phone for 48 hours. I tried to return the s-pen after, but it seemed to trigger something and the screen started flickering. it lasted for a day but it's now completely normal.
Aside from those, everything is fine with the phone. I managed an online backup to Samsung account and everything.
If you're still here, here are some of my questions. I appreciate all your help.
1. I've now turned it off for a complete drying. Now I can't turn it on. Is there a way to turn it on? Is a USB C jig available to do this?
2. I left some sensitive data in the phone *coughbootypicscough*, is there a way to access the memory and wipe it? or maybe factory reset the phone without turning it on?
3. Can the cameras be replaced / fixed?
Hoping for all our help.
maxram said:
It's supposed to be water resistant, but I've never dunked it intentionally under water. Bought this in 2017. Unfortunately, I had an accident and it fell inside a sink full of hot water (while I was taking care of a patient) and it stayed there for a minute or two.
What happened are the following:
Power button no longer works - It was a little wonky as it kept turning the screen on and popping up the camera. I tried to turn it off, but it kept turning back on.
Stock camera app - doesn't work anymore. whenever I try to activate the app, it just crashes.
Rear camera hardware - focusing is gone. Using another app (camera zoom fx) I can access it, but pics are blurry. It can't focus on images 12 feet away.
Front cam hardware - there was a mist that fogged the camera. but it seems to be working fine after.
Screen - the screen was relatively ok after the dunking. However, water got inside the S-pen port. I immediately removed it and started drying the phone for 48 hours. I tried to return the s-pen after, but it seemed to trigger something and the screen started flickering. it lasted for a day but it's now completely normal.
Aside from those, everything is fine with the phone. I managed an online backup to Samsung account and everything.
If you're still here, here are some of my questions. I appreciate all your help.
1. I've now turned it off for a complete drying. Now I can't turn it on. Is there a way to turn it on? Is a USB C jig available to do this?
2. I left some sensitive data in the phone *coughbootypicscough*, is there a way to access the memory and wipe it? or maybe factory reset the phone without turning it on?
3. Can the cameras be replaced / fixed?
Hoping for all our help.
Click to expand...
Click to collapse
The fact that water was hot made it easier to gain access to the inside of the phone and personally I'm going to say it's now a hardware issue and the phone is likely no good anymore.. If you're worried about certain pictures on the phone just destroy the phone so no one could possibly take parts out of it and try to use them. Smash it with a hammer, drive over it, you get the idea.. Just get another phone at this point the reason I know it's a hardware issue is because of what your camera did so the water made it past the seals mainly because it was hot and loosened the glue to get past it.
MrMike2182 said:
The fact that water was hot made it easier to gain access to the inside of the phone and personally I'm going to say it's now a hardware issue and the phone is likely no good anymore.. If you're worried about certain pictures on the phone just destroy the phone so no one could possibly take parts out of it and try to use them. Smash it with a hammer, drive over it, you get the idea.. Just get another phone at this point the reason I know it's a hardware issue is because of what your camera did so the water made it past the seals mainly because it was hot and loosened the glue to get past it.
Click to expand...
Click to collapse
it actually still works. I tried hard not to turn it off because the power button is broken. Last night, I fell asleep and forgot to charge it and battery drained and phone turned off.
It still charges but I can't turn it on because the power button is broken.
I was hoping if anyone knows if a USBC jig can help and turn it on for a bit or any other way to trigger download mode and then restart.
Try to hold Volume down + Bixby button and plug the cable in, it may be goes in download mode amd than you can reboot you phone. If not try only with Volume down and cable.
zyxw-androidiani said:
Try to hold Volume down + Bixby button and plug the cable in, it may be goes in download mode amd than you can reboot you phone. If not try only with Volume down and cable.
Click to expand...
Click to collapse
I'll try that again. For now, I'm placing the phone inside a box with desiccant to ensure that it dries completely. Hopefully, it restores some function to the powerbutton.
maxram said:
I'll try that again. For now, I'm placing the phone inside a box with desiccant to ensure that it dries completely. Hopefully, it restores some function to the powerbutton.
Click to expand...
Click to collapse
Try opening and removing the simcard tray while the phone rest in the box with desiccant. Hopefully can remove water vapors better and faster.
Sent from my SM-G985F using Tapatalk