Related
Battery Code to Live by...
Treat it like your mom = Great Battery Life
Treat it like a Hooker = Piss poor Life..
Dead HorseVibrant
READ READ READ READ READ READ READ READ READ READ READ READ READ READ
A. First Time Flashers, This MIGHT erase the internal SD= So Back-up before flashing
B. Disable Voodoo before Flashing
Fully Boot After Disabling Voodoo before Flashing Dead Horse
C. Disable any Lagfix before flashing back to a Voodoo Kernel
Fully Boot After Disabling LagFix before Flashing Voodoo
Dead Horse ULF OC/UV:
:Features:
***Chang log Dead Horse ULF OC/UV****
( Data Wipes / SDCard Wipes should be 100% Fixed now )
~ Now Overclock to 1.2GHz ( Removed all others until I find the source of the lag )
~ Clock settings ( 1.2GHz / 1GHz / 800MHz / 400MHz / 200MHz / 100MHz )
~ More Clean up of the ULF settings
~ Bumped the Speedmod back up to 332MB
~ Market issue's fixed ( Disappearing after Kernel flash &/or Settings>Privacy>Factory Reset )
~ Few error's in recovery fixed
~ Factory Reset now works from Android OS ( Settings>Privacy>Factory Reset )
~ Memory Error's showing 0MB after Kernel flash
~ Kernel is undervolted by -25mv from stock
~ Safety Net boot-up at 1GHz for those that can't fully push there phones to 1.28Ghz
~ Safety Net boot-up in recovery at 1GHz Max to limit issues if any.
~ Scaling edits
~ Fixed ADB Root while in Recovery
~ Full HD Working
~ Based on t959 ( Vibrant ) Source
~ Factory resets should be fixed
~ 2e Recovery removed, now 100% CwM Recovery Only
~ Random conversion fixed ( Random issues that asked to apply lagfix )
~ dhd.ko replaced
~ Wifi Calling fixed
~ few name changes in recovery settings to make more noob friendly
~ SetCPU Profile working ( Bit of wake-up lag to make this work, not too bad either )
~ Headsets with no Mic's now work for Phone Calls
~ symlink to fat.format is removed & binary replaced & repaired ( To Prevent issues with Voodoo )
~ Removed KB1 Modem
~ Correct Vold Files
~ ULF Lagfix Selection noob friendly now
~ Back light notification ( BLN )
~ Voodoo Color
~ Voodoo Sound v4
~ Voodoo sound for HAC Call settings Fixed
~ Battery Life is to par with Stock Kernels
Voltage Settings:
{1200000, 1300, 1100, 1},
{1000000, 1250, 1100, 3},
{800000, 1175, 1100, 4},
{400000, 1025, 1100, 5},
{200000, 925, 1100, 6},
{100000, 925, 1000, 7},
Kernel Version EB-Productions #53
Download ClockworkMod Ready .zip > Dead_Horse_ULF_OC_UV.zip
Thanks To:
xCaliburinhand
neldar
Cyanogen
Supercurio
Morfic
Team Whiskey
&
All the Testers.
Awsome will check it out.
So will this be ok to flash over voodoo? Is it the same style of ext4 support we're used to lately? I saw someone mentioned the recovery is different and such. Want to ask questions before I flash this.
Sent from my SGH-T959 using XDA App
How much battery life can we expect out of this with moderate use?
anthonys2r said:
How much battery life can we expect out of this with moderate use?
Click to expand...
Click to collapse
Well 10% for roughly two hours means 20+ hours
Sent from my SGH-T959 using XDA App
joe.kerwin said:
So will this be ok to flash over voodoo? Is it the same style of ext4 support we're used to lately? I saw someone mentioned the recovery is different and such. Want to ask questions before I flash this.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yeah can someone plz confirm if we can flash with supercurio voodoo kernel anabled?
Also has anyone confirmed if this is i9000 based?
backup all disable voodoo it can be re-enabled after flash is complete.
anthonys2r said:
How much battery life can we expect out of this with moderate use?
Click to expand...
Click to collapse
Using the Phone was never the Problem.. It was while you wasn't using it
The Power Management was screwed up and a few other things.
Regarding Disabling Voodoo Kernel, not Sure EXT4 is Supported but I've not Flashed it over a Voodoo Kernel though.. Worst case you would need to odin, I would wait for somebody to post result of a direct flash over before doing so.. Unless you don't mind ODIN just for testing purpose.
joe.kerwin said:
Well 10% for roughly two hours means 20+ hours
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
So far
What is that program/widget Eugene!
I searched battery left and found it, looks like a sweet app!
Sent from my SGH-T959 using Tapatalk
kaine13x7 said:
What is that program/widget Eugene!
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Battery Left Widget...
This is seriously amazing, (tested from other thread) and the battery life is insanely good! I'm at the moment, restoring my sms, ect, and playing music, and my battery is still at 100, Eugene, you have a GIFT for the Vibrant, PLEASE never ever leave.
cashyftw said:
This is seriously amazing, (tested from other thread) and the battery life is insanely good! I'm at the moment, restoring my sms, ect, and playing music, and my battery is still at 100, Eugene, you have a GIFT for the Vibrant, PLEASE never ever leave.
Click to expand...
Click to collapse
lmao! Well I'm down to 1 PS3, so I hope I don't brick this anytime soon..
BuLLeT_PrOOf_wAlleTz said:
Yeah can someone plz confirm if we can flash with supercurio voodoo kernel anabled?
Also has anyone confirmed if this is i9000 based?
Click to expand...
Click to collapse
I just flashed it, but I forgot if I had voodoo enabled or not, when I went to the lagfix menu, it said everything was in ext4, so I *think* I had voodoo enabled and it flashed fine. Just disable for safety precautions.
Also, this has the same CWM as the i9000 with the different lagfix options. It superceded the red voodoo recovery with that recovery.
Going to Bed.. Going to OC Add in Under Volting + Patchs & update to the Latest Voodoo in the Next day. Look for Update!
it says the zip file is only 10mb, is that right??
Get some rest eugene. You earned it. What a great community us vibrant owners have here.
Powered by Axura with a dash of Voodoo
hectorcist said:
it says the zip file is only 10mb, is that right??
Click to expand...
Click to collapse
sure...its a kernel not an entire ROM
So I haven't posted in probably a few months now, and I think it's time I do. Hopefully eugene will stick around because I have always liked his contributions, effort, and creations. Will wait for the updated kernel but it sounds exciting
hectorcist said:
it says the zip file is only 10mb, is that right??
Click to expand...
Click to collapse
yes cause its only a kernel not a rom
Hi I find that in MIUI whenever the phone rebooted the CPU runs at 1.5 GHz. How do I change this besides doing set on boot on any CPU app.
Sent from my CSL-MI410 using XDA App
nayneshdev said:
Hi I find that in MIUI whenever the phone rebooted the CPU runs at 1.5 GHz. How do I change this besides doing set on boot on any CPU app.
Sent from my CSL-MI410 using XDA App
Click to expand...
Click to collapse
This does not happen to me. I have SetCPU installed and am running @ 800 MHz. Whenever I reboot, it continues to use this setting
This is strange. I still have this problem. I got my phone on last monday itself and within the first hour i flashed MIUI. Then i saw that cpu was oced to 1.5 GHz, installed setCPU couldn't change the frequency even after granting root, then tried with CPUmaster that did the trick. Again some random reboot after a day and back with 1.5 GHz then CPUmaster also didn't work so installed no-frillCPU that allowed me to change the frequency. So far within three days i had three random reboots and no-frillCPU seems to work fine.
I rebooted the phone manually to check whether the issue is with random crash/reboot and found that the isssue persists. Seems to be built into the kernel itself as i have not done set on boot. Shall try with set on boot ? will this be safe ?
nayneshdev said:
This is strange. I still have this problem. I got my phone on last monday itself and within the first hour i flashed MIUI. Then i saw that cpu was oced to 1.5 GHz, installed setCPU couldn't change the frequency even after granting root, then tried with CPUmaster that did the trick. Again some random reboot after a day and back with 1.5 GHz then CPUmaster also didn't work so installed no-frillCPU that allowed me to change the frequency. So far within three days i had three random reboots and no-frillCPU seems to work fine.
I rebooted the phone manually to check whether the issue is with random crash/reboot and found that the isssue persists. Seems to be built into the kernel itself as i have not done set on boot. Shall try with set on boot ? will this be safe ?
Click to expand...
Click to collapse
I'm using SetCPU in MIUI 1.11.11 with native kernel, SetCPU is working well. I Set to use 1209 MHz max and 122 MHz min for daily use (ofcourse setted onboot), and set several profile also.
No random reboot.
For changing frequency in SetCPU, just SLIDE ABOVE THE SLIDER, NOT ON THE SLIDER. Works for me.
I was in RC2, and flashed with 318E A02 just before MIUI 1.10.21 then MIUI 1.11.11 from the day released.
I did wipe from one ROM to others, except from MIUI 1.10.21 to 1.11.11....
CacingKalung said:
I'm using SetCPU in MIUI 1.11.11 with native kernel, SetCPU is working well. I Set to use 1209 MHz max and 122 MHz min for daily use (ofcourse setted onboot), and set several profile also.
No random reboot.
For changing frequency in SetCPU, just SLIDE ABOVE THE SLIDER, NOT ON THE SLIDER. Works for me.
I was in RC2, and flashed with 318E A02 just before MIUI 1.10.21 then MIUI 1.11.11 from the day released.
I did wipe from one ROM to others, except from MIUI 1.10.21 to 1.11.11....
Click to expand...
Click to collapse
Oh so that's the issue that I have to slide above the slider in setcpu. Anyways thanks both of u for the reply. Well m not trying that out happy with nofrills CPU. No more crash reboots. I am just loving MIUI and don't even had crossing thought of going to stock rom even though the incoming call volume issue persists. Any suggestions towards that end?
Sent from my CSL-MI410 using XDA App
Ok so today I installed uckernal v5 and guess what whenever I reboot the device it runs at 1 ghz. So somehow it had to do with kernel I guess.
Sent from my CSL-MI410 using XDA App[/Qent from my CSL-MI410 using XDA App
nayneshdev said:
Ok so today I installed uckernal v5 and guess what whenever I reboot the device it runs at 1 ghz. So somehow it had to do with kernel I guess.
Sent from my CSL-MI410 using XDA App[/Qent from my CSL-MI410 using XDA App
Click to expand...
Click to collapse
UC5.1 kernels worked well with all the ROMS (RC2, MIUI) but faced some problems with WiFi in edowar's latest ROM. But edowar's stock kernel can do 1.4 GHz so no point pushing it to 1.5 GHZ.
Just my 2 cents.
Hi ,
I have a few begineers questions , I have a galaxy s that is running gingerbread 2.3.6 , is rooted and had a voodoo kernel (with recovery option) . I was thinking of possibilities of overclocking , can that be done with the setup I have ?
thanks in advance
You can easily overclock your phone with a root access with an application like this :
bit.ly/fnUFCD
There are lots of applications existing.
You can see on your kernel thread on this board what frequency is supported.
try Tegrak overclock or NSTools. Find other apps on Market.
Sent from my GT-I9000 using XDA App
thanks for the info guys , installed busybox and android overclock , but appears the kernel is not able to be overclocked as I got a message and the max frequency showing is 1000 mhz , would anyone be able to recommend a kernel that would suit - would like to keep things preety simple and straightforward at the mo
cheers
saintetienne said:
thanks for the info guys , installed busybox and android overclock , but appears the kernel is not able to be overclocked as I got a message and the max frequency showing is 1000 mhz , would anyone be able to recommend a kernel that would suit - would like to keep things preety simple and straightforward at the mo
cheers
Click to expand...
Click to collapse
Semaphore is the best http://forum.xda-developers.com/showthread.php?t=1112908
thanks again , my phone is showing jvz suffix at end of kernel - show the semaphore jvz is the way to go ?
I am trying to avoid an expensive paperwight
Semaphore kernel can work on all gingerbread roms. So it is safe to flash semaphore 2.5 on your phone.
Sent from my GT-i9000 running ICS using XDA App
sefira said:
Semaphore kernel can work on all gingerbread roms. So it is safe to flash semaphore 2.5 on your phone.
Sent from my GT-i9000 running ICS using XDA App
Click to expand...
Click to collapse
Absolutely right
thanks guys , will take a look tonight , think I used heimdall frontend previously , that ok or any better options ?
cheers
saintetienne said:
thanks guys , will take a look tonight , think I used heimdall frontend previously , that ok or any better options ?
cheers
Click to expand...
Click to collapse
You can use CWM
install zip from sd ?
cheers
Plumped for odin in the end - all done , thanks to everyone for your help
Will overclocking the phone significantly reduce battery life? Or cause any degradation of the phone due to excess heat?
Kops said:
Will overclocking the phone significantly reduce battery life? Or cause any degradation of the phone due to excess heat?
Click to expand...
Click to collapse
Battery use will obviously be higher with the processor on more clock speed but there's no problem with the temperature. Remember, always overclock in minor steps,check stability and in this way you would get a stable phone
am just asking for the fastest & stable ... dont give me an answer that tells you have to try & what am i looking for bla bla bla
what is the fastest stable rom ?
Kernel ?
I/O Scheduler ?
Governor ?
Voltage ?
any other setting or apps that will help ?
PLZ PLZ
just give me the fastest & stable no need to tell me more ... simple & thakns
Recommend. Miui!!!!! ( made in China )
jaln1987 said:
Recommend. Miui!!!!! ( made in China )
Click to expand...
Click to collapse
whats that got to do with my question ?
Slim 3.6
Semaphore 1.1.1sbm
smartass v2/sio
LMK 75mb
sd card cache 1024mb
network tweak
chainfire sensitivity
deep idle ON
remove unwanted apps
Option to OC (i use 1.1ghz) but its not really needed
Sent using TCP/IP
gsw5700 said:
Slim 3.6
Semaphore 1.1.1sbm
smartass v2/sio
LMK 75mb
sd card cache 1024mb
network tweak
chainfire sensitivity
deep idle ON
remove unwanted apps
Option to OC (i use 1.1ghz) but its not really needed
Sent using TCP/IP
Click to expand...
Click to collapse
keep on restarting & force closing
although i wipe everything before installing ..... ???
any idea ?
& i cant find SIO ... only noop & deadline & simple I/O
same is for the LMK
gsw5700 said:
Slim 3.6
Semaphore 1.1.1sbm
smartass v2/sio
LMK 75mb
sd card cache 1024mb
network tweak
chainfire sensitivity
deep idle ON
remove unwanted apps
Option to OC (i use 1.1ghz) but its not really needed
Sent using TCP/IP
Click to expand...
Click to collapse
aha ok i see
i did them all but still no sio ... installed scripts but no sio
should i uninstall the original script ?
Not sure but i remember something about lmk causing issues. Could be wrong but maybe try that on default.
I'm running slim ics 3.6, semaphore 1.1.1sbm but with everything default and am happy. Been using semaphore/slim ics combo for a month or so with no force closes at all.
Sent from my GT-P7500 using Tapatalk 2
You know, that question is a bit like asking "what is the healthiest dinner?" and expect to get to same answer from everyone.
Different roms are more stable for certain usage. That said, AOKP roms are most stable for me, I've had no issues at all on infinitum.
Non ics roms would be Darky 9.5, rock solid with working call recording. This is pretty widely recognized as a very stable rom.
Sent from my GT-I9000 using Tapatalk 2
asoom69 said:
aha ok i see
i did them all but still no sio ... installed scripts but no sio
should i uninstall the original script ?
Click to expand...
Click to collapse
you set smartass and sio using semaphore app. set min memory using ASS app from settings.
Sent using TCP/IP
I am using the Doc's Master Rom V11. So far I have no major problem. Only 1 issue, It always prompted me that i have Low On Space where in fact. I still have 1GB of phone memory..
adytum said:
You know, that question is a bit like asking "what is the healthiest dinner?" and expect to get to same answer from everyone.
Different roms are more stable for certain usage. That said, AOKP roms are most stable for me, I've had no issues at all on infinitum.
Non ics roms would be Darky 9.5, rock solid with working call recording. This is pretty widely recognized as a very stable rom.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
infinitum is great but in some games & apps its slow
thats why am looking for a very fast rom & kernel >>>>>
gsw5700 said:
you set smartass and sio using semaphore app. set min memory using ASS app from settings.
Sent using TCP/IP
Click to expand...
Click to collapse
i set it to smartass but still no sio ... not a big deal ok ...
but all these is from smerphone app ... when you go to nstools there is much less option & the highest cpu is 1000mhz
mean while in smerphone you can get it up to 1300 mhz but as soon you leave the apps it goes back to 1000 ... but every other setting stay as i choose ... & when you try to make the profile default as your profile the phone completely shut down
so i did as most of people think which is the fastest ... but still 2 things i cant do
sio
highest cpu ( 1300 ) am stuck with (1000 )
scubadude said:
Not sure but i remember something about lmk causing issues. Could be wrong but maybe try that on default.
I'm running slim ics 3.6, semaphore 1.1.1sbm but with everything default and am happy. Been using semaphore/slim ics combo for a month or so with no force closes at all.
Sent from my GT-P7500 using Tapatalk 2
Click to expand...
Click to collapse
i didnt say it was from lmk ... i was saying i didnt find lmk ... after i install the extra scripts i find it
Calient_Boy said:
I am using the Doc's Master Rom V11. So far I have no major problem. Only 1 issue, It always prompted me that i have Low On Space where in fact. I still have 1GB of phone memory..
Click to expand...
Click to collapse
i am on same rom and it never gives that issue, you may try low space warning msg fix.
Sent using i9000 running Doc's Master 4.0.4
asoom69 said:
i didnt say it was from lmk ... i was saying i didnt find lmk ... after i install the extra scripts i find it
Click to expand...
Click to collapse
goto ass>performance>free memory> you can use it as lmk
Sent using i9000 running Doc's Master 4.0.4
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE BY FLASHING THIS KERNEL
Hi all, i was build kernel for cooper ics based, and have tested by xxxMADxxx
Feature :
Kernel update to 2.6.35.14
800MHz max ,128 min set default with Ondemand and noop for i/o sched
Running All Scripts in /system/etc/init.d
Tweak on Ramdisk
Deep sleep for battery life
UnderVolt module
Overclock support with added some clock
BLN support
swap and ext4 support
added more and more governors scaling & iosched
How to :
put cooper-2.6.35.14-aroma.zip to sdcard
go to recovery mode
mount /system
then flash that zip
Thank's to :
Amarulz to make Aroma installer
TJ Style,Squadzone , Phiexz and Delano (for my reference)
xxxMADxxx to be tester
BNC Family
Link :
http://www.mediafire.com/download.php?zsl6ea83ecvx5j3
PLEASE DON'T MIRROR MY LINK
Tell me if you find bug :good:
reserved
Downloaded will try on nim's MIUI 2.8.3
Sent from my GT-S5830 using xda app-developers app
hi
i read the feature list but still can you tell me howz battery life with this kernal...and is all features in rc1 works with this kernal..?
Pank789 said:
hi
i read the feature list but still can you tell me howz battery life with this kernal...and is all features in rc1 works with this kernal..?
Click to expand...
Click to collapse
i was include deep sleep on my kernel that can make better for battery life ..
that kernel was tested on cm9 rc1 you can see on SS
Nice!
Still 2.6.35 but not bad at all.
What about 920 mhz OC version?
Plus what governors available??
masterex567 said:
Nice!
Still 2.6.35 but not bad at all.
What about 920 mhz OC version?
Plus what governors available??
Click to expand...
Click to collapse
yup cause i see 2.6.35.14 stable version on kernel.org ..
cmiiw ..
i was added 921 MHz clock not 920MHz maybe that more stable ..
and for governors that to much if i'm write here ...
maybe 21 governors on my kernel ...
you said that you have fixed deep sleep
so does that include the fixing of the deep sleep problem after using camera app and Bluetooth?
please reply dude.
Ace King 34 said:
you said that you have fixed deep sleep
so does that include the fixing of the deep sleep problem after using camera app and Bluetooth?
please reply dude.
Click to expand...
Click to collapse
yup cause deep sleep script include on my kernel not in init.d ..
maybe you can try this kernel and give me report about that ..
cause i don't have device but on my gio that work
There's such a governor as DARKSIDE and msm7k ? Care to explain ?
"Friends forever." - Ventus
CallMeVentus said:
There's such a governor as DARKSIDE and msm7k ? Care to explain ?
"Friends forever." - Ventus
Click to expand...
Click to collapse
you can search about that on google
i don't know what specify about that scaling governor but that good governor
Oh Great!.
Will test asap.
I'm not running cm9 now, but i'll flash it to try this out.
Good work. :good:
I've tested the kernel on latest rc1 but after 3 reboots deep sleep wasn't working after all...
Working great on MIUI!
Sent from my GT-S5830 using xda premium
Confirming what has been said before, this kernel breaks deep sleep, clean install and fresh boot and no deep sleep.
Sent from my GT-P1000 using Tapatalk 2
PsychOlli said:
I've tested the kernel on latest rc1 but after 3 reboots deep sleep wasn't working after all...
Click to expand...
Click to collapse
Stilm said:
Confirming what has been said before, this kernel breaks deep sleep, clean install and fresh boot and no deep sleep.
Sent from my GT-P1000 using Tapatalk 2
Click to expand...
Click to collapse
ive tried this kernel for two rom (MIUIV4 & CM9 RC1) and i confirmed to you about DEEP SLEEP IS WORKING but after using CAMERA,yes its not work...Must reboot to make that work again..
Tried this kernel on CM9 RC1 and i must say I was impressed with it.
deep sleep works.
Ram disk mod is cool.
and the governors are also a lot in number
Ace King 34 said:
Tried this kernel on CM9 RC1 and i must say I was impressed with it.
deep sleep works.
Ram disk mod is cool.
and the governors are also a lot in number
Click to expand...
Click to collapse
nice to know that sir ...
xxxMADxxx said:
ive tried this kernel for two rom (MIUIV4 & CM9 RC1) and i confirmed to you about DEEP SLEEP IS WORKING but after using CAMERA,yes its not work...Must reboot to make that work again..
Click to expand...
Click to collapse
Didn't use anything at all, flashed and let it stand by. After about 1hr went to check on cpu spy (only app installed) and deep sleep didn't kick in. Guess that was me then.
Sent from my GT-P1000 using Tapatalk 2
Stilm said:
Didn't use anything at all, flashed and let it stand by. After about 1hr went to check on cpu spy (only app installed) and deep sleep didn't kick in. Guess that was me then.
Sent from my GT-P1000 using Tapatalk 2
Click to expand...
Click to collapse
Same thing here