Hi everyone!
Sad thing happend with me, 4 days ago i fell into a river and sadly ma diamond was in the pocket. I dryed it for three days, turned it on, everthing else works, besides the screen light. So i dissambeled the phone to bits and pieces, only i didn't took the LCD out(read it from somewhere that you can't put it back on afterwards so it will work). I reassambeled it and still same situation. If you look it from a angel you can see the icons and even touchscreen works. Only problem is still the backlight. So is there something i can do to make the backlight work again or i have to buy a new screen and is it hard to swap the screen ?
Hi,
Not sure if you will need to replace the screen, if you can get to the power settings you can see if the backlight has been manually turned down. If this fails and a screen replacement is required i will tell you how easy/difficult it is once i have replaced mine, due to unfortunate circumstances.
yeah, i got into the power settings, everthing is okey there like it should be , so i have to change the screen. Is there some kind on intrcutions for changing it? it would help me a lot
Hey guys, I was wondering if somebody would be able to maybe help me diagnose the fault\problem part with my non-working diamond...
Basically I went to a club one night and the place was unbelievably steamy / humid. My phone was working one minute and then the next it wouldnt display anything on the LCD. The backlight was working however.
Since then I havent been able to get an image on the screen although when trying to turn it on, it seems to go through its startup sequence (backlight -> vibration -> beep (i think))
I havent had any power to the phone since a day after it broke (a few weeks ago).
I'd like to get it back working again but dont know exactly what part i would need to replace. I'm fairly competent with electronics .
Any help/advite would be appreciated!
Haha, ok that's odd...
I've plugged it into my pc to get some data files off about an hour ago.. forgot about it and just looked at it now and the screen is displaying!
It is displaying and accepting input although it was flickering at first (like pixel shifting). but i pressed the power button to standby the screen and pressed it again and the display is fine with no flickering ?
Ive moved the phone about and shook it quite hard to see if there's any loose connection but the display still seems fine..
Anybody have any ideas as to what it may be?
I'm not going to deem it as fixed until I know what the problem was/is lol
cheers guys
Ok screen actually keeps flickering nonstop, and sometimes 'fades away' to gray/white/black
comes back after a few seconds though
Looks like a faulty connector?
Hello,
I'm not really sure if anyone encountered this before..
Suddenly today in the morning, I notice my Milestone's touchscreen is acting up.
I can't reach the menu button at the bottom of the screen. It always chooses Phone or Web Browser button instead :/
I use search to get to Dev Tools and Pointer Locations, and I realize there's a segment, about 1 third of the touchscreen, in the middle, unresponsive to touch.
I tried cleaning the screen, clearing cache, rebooting, it made it work temporarily, but then it returned again. I changed to stock 2.1 SBF, still no change. And now, its stuck in this state, I can't get it to work even temporarily..
I really dont want to send it to Customer Service, is there anyway to solve this?
Thanks!
Lesiroth said:
Hello,
I'm not really sure if anyone encountered this before..
Suddenly today in the morning, I notice my Milestone's touchscreen is acting up.
I can't reach the menu button at the bottom of the screen. It always chooses Phone or Web Browser button instead :/
I use search to get to Dev Tools and Pointer Locations, and I realize there's a segment, about 1 third of the touchscreen, in the middle, unresponsive to touch.
I tried cleaning the screen, clearing cache, rebooting, it made it work temporarily, but then it returned again. I changed to stock 2.1 SBF, still no change. And now, its stuck in this state, I can't get it to work even temporarily..
I really dont want to send it to Customer Service, is there anyway to solve this?
Thanks!
Click to expand...
Click to collapse
Same with me, i can't reach from menu in a bottom side to upper side, maybe 10mm dead space + 7mm right side from bottom side to upper side.
Please help me!!
Sorry my english is not good
It happen to me last 2 weeks while helping out a friend's Milestone. After i flashed a kernel, the whole screen is not working. Trying to flash back to stock ROM,custom ROM,etc but still the same.
By accident i press and hold both BACK key(the bottom left) and SEARCH key( bottom right) and ON the phone. I let go of the the two,BACK and SEARCH key after the phone is completely ON. To my surprise, it works!!! Until now the phone has no problem with the touchscreen.
I hope you guys can try this out or is it an coincidence,I don't know..
bietoff0728 said:
It happen to me last 2 weeks while helping out a friend's Milestone. After i flashed a kernel, the whole screen is not working. Trying to flash back to stock ROM,custom ROM,etc but still the same.
By accident i press and hold both BACK key(the bottom left) and SEARCH key( bottom right) and ON the phone. I let go of the the two,BACK and SEARCH key after the phone is completely ON. To my surprise, it works!!! Until now the phone has no problem with the touchscreen.
I hope you guys can try this out or is it an coincidence,I don't know..
Click to expand...
Click to collapse
thanks but no fix it for my phone
I had the same problem sometime last year, which I eventually fixed by clearing cache partition and rebooting a bunch of times.
Unfortunately, the problem re-appeared today. So far, rebooting and clearing cache hasn't worked.
By any chance, have any of you installed the WiiMote Controller App? I was convinced that was what was doing it to my phone. (maybe not, as I never re-installed it though)
I'm about to flash the sbf file, but as Lesiroth said, that might not work
i believe u r having GHOST TOUCHSCREEN syndrome
my touchscreen sometime do not response to my touch
it just went berserk!
the notification bar keep sliding up and down
if im in the menu, it goes up and down too!
sometime i cant unlock the screen bcos it do not respon
however, some chinese users found that this could be due to ripped/ torn ribbon
just google it
it is widely reported too!
I just want to say that I have fixed my Droid's touchscreen problem (or maybe it will re-appear in another six months).
Anyway, I just set the screen brightness to max and screen timeout to 30min and let the battery drain. I took the battery out for a second and then charged the phone with the USB that came with the phone over the wall socket.
I think the USB wire is the culprit (I was using a BB one for a while).
haroldz123 said:
i believe u r having GHOST TOUCHSCREEN syndrome
my touchscreen sometime do not response to my touch
it just went berserk!
the notification bar keep sliding up and down
if im in the menu, it goes up and down too!
sometime i cant unlock the screen bcos it do not respon
however, some chinese users found that this could be due to ripped/ torn ribbon
just google it
it is widely reported too!
Click to expand...
Click to collapse
my problem seemed to be disappeared after i soft reset n use stock rom
i tot launcher pro was the culprit but it is not
so i re-install LP n use for 1 day
d only problem i had was when i went for a jog, i tucked it on my waist (no in the pocket).
after that the screen stop working at all, i have to reboot by taking the battery a few time.
after 30 min or more, the problem was gone.
tis could be due to the stress applied to the screen when im joggin (as it it as "touched" while im jogging).
however, i removed beautiful widget n its addon too, dat could the source of the problem as well.
SOLUTION: soft reset, use stock rom / launcher for 1 day
if it still persist, it could a hardware problem
jtnw said:
I just want to say that I have fixed my Droid's touchscreen problem (or maybe it will re-appear in another six months).
Anyway, I just set the screen brightness to max and screen timeout to 30min and let the battery drain. I took the battery out for a second and then charged the phone with the USB that came with the phone over the wall socket.
I think the USB wire is the culprit (I was using a BB one for a while).
Click to expand...
Click to collapse
I am glad that you solved your problem. Unfortuntely the past week or so has been a really busy time for me, I could not focus on this problem. I will try your solution, although I still think it is a broken digitizer on my part.
maybe the problem is the digitizer..
try to change rom or wipe it first..
if the problem still persist i think its the digitizer..
use only the original charger..
OMFG that worked on my phone!!!
bietoff0728 said:
It happen to me last 2 weeks while helping out a friend's Milestone. After i flashed a kernel, the whole screen is not working. Trying to flash back to stock ROM,custom ROM,etc but still the same.
By accident i press and hold both BACK key(the bottom left) and SEARCH key( bottom right) and ON the phone. I let go of the the two,BACK and SEARCH key after the phone is completely ON. To my surprise, it works!!! Until now the phone has no problem with the touchscreen.
I hope you guys can try this out or is it an coincidence,I don't know..
Click to expand...
Click to collapse
----------------------------------------------------------------
A segment of my phone covering the home button went dead two weeks ago.. and duuuuude did this work!! its super smooth as ever!!! thanks a ton!!
Mine did the same exact thing! The entire strip from the home button to the top of the screen no longer works!
Sent from my SAMSUNG-SGH-I777 using XDA App
silverslasher said:
Mine did the same exact thing! The entire strip from the home button to the top of the screen no longer works!
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
ive the same problem, and i believe that's because of moisture. because every time when its raining except the problem with right side of screen im not even able to use the phone touch screen doesn't work at all and the phone just does something by itself! this issue started with small vertical bar from right side of screen and it growing everyday now im not able to use right side of screen till home button.
i want to know do i have to replace touchscreen or i can fix it with something to absorb humidity?
thanks in advance
So, My diamond woke up me this morning, as usual. but problem...
my Diamond's screen didn't respond. and seems like under screen there is like vaccum. whole digitizer is pushed down, haven't had this kind of problem before. How can I get rid of that?
Last night things worked great.....
You can`t get rid of this problem. It`s a HTC known issue.
A friend who ownes a Touch Pro has the same problem. If he puts his headset to recharge during the night face down , it will cause the interior of the touchscreen to vacuum wich renders his phone operable , but without touchscreen capabilites ( for a short while ).
I replied thinking you left your phone face down during the night. If not , then my solutions is invalid.
well i left my phone charging whitout pouch onto glass table, so that screen was down.. yes the problem disappeared but about 2-3 weeks my phones screen was dead because here(in estonia) january s temperatures are as low as -30C and screen needed heat to come out of vaccum. it happens occasionally(never happened before). to conclude it I bought new screen and changed screen myself
Hello
One night I was using the phone without doing anything special , some video watching . Phone went dark, tried to reboot. Blank Screen and the capacitive buttons flash. Left it to charge all night, in the morning it started but after I pressed the lock button blank screen but phone still working and receiving input.
Took the battery and SD card out left it for 30 seconds then started it again, Stuck at LG logo. Repeat , phone started ... Pressed lock button once then again to unlock , screen wouldn't start.
Used LG Mobile Update recovery tool to restore it ... Didn't solve problem. Sometimes it does not even start , just flashes buttons, other times it does without screen and last all works even the screen until first time goes dark , in the last two cases I can use LG On-Screen Phone without trouble, in doing so I installed a proximity sensor test app to see if it was causing my screen to not come back on , the sensor looked fine.
Facts:
1. Two day old Optimus Black p970, worked like a charm until stated problem
2. The app that checked proximity sensor showed the sensor to be free when my hand wasn't on it
3. The warranty laws in my country are idiotic so I would do or buy anything rather than send it so they can give me a new one in 3 months.
4. Tried another battery from another Optimus, fully charged nothing different.
5. Stock rom.
Do any of you fine people have some ideas on how to fix this? Thanks in advance
Hi there...
Sometime ago [1 year and a half or so~] I worked at a cell refurbishing facility [there were samsung, motorola and palm devices from sprint] and that problem you have was quite usual. Blank screen, still the phone is somehow usable like reciving calls...
There's this thing called "flex" which is the connector between board and display and that is what we fix, most of the time not even "fix it" just getting it in the right place...
This happen because of excesive use in those sliding or clamshell devices, in OB could be for overheating, you could try to fix it yourself or pay $20 usd [that's what it cost here]
Would that connector explain the fact that sometimes it doesn't start at all? hmm I am thinking now and I guess if it moves and somehow the phone feels it has not display connected it could fail to start... Anyhow thank you
actually yes, it could be only for the flex [some devices don't start at all when not having display or keyboard if there's any] but since our OB is not sliding nor clamshell type probably was overheating.
you say you have stock rom, well now I'm using CM7 but when I was at stock and after using the phone a few minutes it felt warm and some more minutes [like playing gunbros where you need to use both hands and a lot of movement] it was really hot and had to stop playing for a while.
what I'm trying to say is that because of overheating flex could have moved, but because of overheating too may have move something else, you couldn't belive the huge number of micro-things that reside in the board.
so if it's only the flex, it's an easy task to do, just unplug and plug again, but if it's something else it's quite hard to know just looking at it, you need to do some electric measures and stuff, the recomendation is to take it to a tech center or something
Hi. I Have same issue. Two times when i press power buton, butons flashing and screen still black. Phone not responding. I must remove baterry.
Sent from my LG-P970 using Tapatalk
Hi there, got the same problem too with my optimus black. Screen goes flickering, shut down don't do any good, and the phone temperature is kinda hot. But in my case it work after I clean some cache and data in the phone storage through LG OSP. After that, the phone temperature back to normal and the phone screen back to normal also. I believe that in my case the phone is overheated.