[Q] Formated internal SD - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello, after houers of reading posts i found out that no1 haz the same problem az me.
Basicly i formated my internal SD on my Galaxy s, ( conected the phone to a pc, right click format, the internal insted the external SD )
now my phone cant boot up, i cant run recowery mode, can only run download mode.
if i turn the phone normaly on it yust rebots ewry 5 sec.
Can somone pliz help me

igorvrecar said:
Hello, after houers of reading posts i found out that no1 haz the same problem az me.
Basicly i formated my internal SD on my Galaxy s, ( conected the phone to a pc, right click format, the internal insted the external SD )
now my phone cant boot up, i cant run recowery mode, can only run download mode.
if i turn the phone normaly on it yust rebots ewry 5 sec.
Can somone pliz help me
Click to expand...
Click to collapse
well you just probably need to flash a rom now!

How do i do that, since i cant ented recowery mode. all i can do iz enter download mode, and when i connect the phone to a pc its showin no internal internal memory 0 mb
or do i need to root it again like i did the first time i flasht it.

Does Odin not work when you're in Download Mode?
If it does, the stock Gingerbread Firmwares are here.

ok gona tray now, ty

ok so i tried to use odin, but when the phone wanted to rebot it dident turn on enymore, the computer cant recognize it enymore when i plug it on the usb, i cant ewen turn it on enymore while usb cable is pluged in, and i cant enter downloadmode either when the phone iz unpluged, only loop scren.

Take out the battery and try entering Download Mode again by holding the Volume Down, Home and Power button at the same time. Then download JVR from samfirmware.com. It will include Odin3. Select "MODEM_I9000XXJVR_REV_00_CL1044379.tar.md5" as PHONE, "CODE_I9000XXJVR_CL425308_REV03_user_low_ship.tar.md5" as PDA and "CSC.tar" as CSC. Remember to select "Re-partition".

No luck vith volumen down+home+power, the phone yust keps rebooting,and if i plug it on the PC by USB i cant ewen start the phone. Eny other idea (o and vhat rom shud i download to instal from odin if i can get it werking, or iz that all included in the package). Sry for the stupid questions but im realy confused now and frustraded and all bicoz 1 misclick.

Try taking the battery out for half an hour, then reinserting, and try down load m mode again, if that doesn't work repeat, but this time hold buttons before you insert battery, post back and let us know what happens
Sent from my GT-I9000 using XDA Premium App

Ok so i managed to get download mode werking by using a USB dongle i think this is caled JIG, now i need ure help, after formating my internal memory im not sure if i can do recowery, basicly i am a bit afrade to mess it up ewen more so if enyone vud tel me what to do next, do i need odin, and what rom do i need to download, prety sure i cant use darky for this. Or if there iz a threat about this cud somone pliz post a link, i am hawing truble finding it.
TY!!!

d0ggy said:
Take out the battery and try entering Download Mode again by holding the Volume Down, Home and Power button at the same time. Then download JVR from samfirmware.com. It will include Odin3. Select "MODEM_I9000XXJVR_REV_00_CL1044379.tar.md5" as PHONE, "CODE_I9000XXJVR_CL425308_REV03_user_low_ship.tar.md5" as PDA and "CSC.tar" as CSC. Remember to select "Re-partition".
Click to expand...
Click to collapse
But, do you tried this?
I think it is the right solution

igorvrecar said:
No luck vith volumen down+home+power, the phone yust keps rebooting,and if i plug it on the PC by USB i cant ewen start the phone. Eny other idea (o and vhat rom shud i download to instal from odin if i can get it werking, or iz that all included in the package). Sry for the stupid questions but im realy confused now and frustraded and all bicoz 1 misclick.
Click to expand...
Click to collapse
you could try the magic jig ??. its costs very little to make and it works every time for me, just do a search for jig in the forums its a brilliant tool and so simple to make and you have nothing to lose and it will not damage your phone, if you were closer i would send you mine. good luck and regards

Related

Reboots when Usb connected

Flashed today my GT-I9000 to TO froyo I897UCJI6. I know i should not have done that now. But i really got pissed today at the gps of my phone and when i saw and update for galaxy s i just went for it, haven't checked the phone variant version. Thing is now my phone has no gps whatsoever it boots up fine but, sound only shows when i plug my headphones, accelerometer dont work correctly and so on....
So i though i`ll flash it back to stock. But the thing is once i connect the usb cable the phone just reboots and stays dead until the usb is disconnected.
I read the other threads but found no similar issues.
Here is a brief video of my problem
-http-://-www-.youtube.-com/-watch?v=MtcCvfCbAFk-
Remove all "-"
since i can`t post links
Anyone has any ideas how to get me back to stock?
Thanks!!
Damn i can`t even charge it!
Kinda weird indeed, try to remove the battery, wait a little, insert the battery and go to download mode (volume - / home / power) then start odin, put all files needed, and connect the usb, if it doesnt reboot hit start...
you got to enable adb debugging on your phone then open a command window and type: adb reboot download connect the usb to the phone and hit the enter key for the adb command before your phone fall asleep, then you are in download mode an can flash any rom with odin.
hope this helps, i flashed the same wrong firmware from the Vibrant.
Thanks Franklin, i tried the battery trick to no luck.
This is i cannot put my phone back to download mode because my "HOME" button is not mapped to do anything, seems like the "RETURN ARROW" button does the fuction when the system is loaded.
Any other ways to flash it back? Sd card or something?
Thanks for replies ;]
please try it my way it worked for me and i think it will work for you
I open the cmd navigate to c:\androidsdk\tools\ type in adb reboot download hit enter, it mounts daemon tools i plug in usb cable and 3 seconds later the phone goes blank and it stays unresponsive(no 3 key combination, not even the power button can turn it back on) i unplug the usb cable and the phone automaticaly shows the AT&T logo and starts up. The same happens when i plug my charger in!. Does that mean my SGS usb port is fried or something? Is there another way to flash my pnoe back to stock ROM?
I am so sorry i tried to make it better :[
Any clues?
no this is NOT a defective phone, its the result of the ROM and the 3 Button combo can´t work oh and you dont really mean deamon tools? and you musst plug the usb cable in the phone right before you hit enter or it can´t work!
I did that too. Like i said the phone turns it self off once the usb cable is attached.
Here is a brief video of my problem
-http-://-www-.youtube.-com/-watch?v=MtcCvfCbAFk-
remove all "-" from url.
dainiuxxx, this thread belongs in the Q&A section, not in development. Take a moment and read the "STOP, READ THIS BEFORE POSTING" thread at the top of both of these sections, it has clear guidelines for proper thread placement.
Sorry for that sirphukee.
Any help? Anyone?
Anyone that can help?
have you tried plugging it into another PC or Laptop?
Yup tried amothe laptop, reboot.
Wall charger, reboot.
So i`m kinda out of options?
yes, return it to the store, to get an exchange
a normal working SGS does not reboot when plugged into any USB port/charger
it's Shorted (damaged) for some reason
ok, return sounds good to me, but what will i have to say when they`ll switch on the phone and see the AT&T logo?
I`m in UK and my network is Orange UK.
Will they accept it back with no problems, i kinda doubt that....
uhh... you are in quite a pickle ...
try to remove the evidence, intentionally use a Update.zip ROM flash to kill the flash
or flash it to stock if you find a good ROM via Update.zip
use the WiFi to download the Update.zip ROM flash to the root of the internal SD to flash it.
ROM Manager can get the same results, you can WiFi install it from Market
AllGamer said:
uhh... you are in quite a pickle ...
try to remove the evidence, intentionally use a Update.zip ROM flash to kill the flash
or flash it to stock if you find a good ROM via Update.zip
use the WiFi to download the Update.zip ROM flash to the root of the internal SD to flash it.
ROM Manager can get the same results, you can WiFi install it from Market
Click to expand...
Click to collapse
Installed ROM manager from market, but seems it needs the phone rooted, right?
And rooting can be done only via usb cable, right?
Where do i find a Update.zip ROM via Wifi? and what are the procedures when i do find it?
OK,
so obviously the question now is HOW DO I F...k up my phone completely so no one could see what was done to it. When i`ll take it back to the shop.
dainiuxxx said:
Installed ROM manager from market, but seems it needs the phone rooted, right?
And rooting can be done only via usb cable, right?
Where do i find a Update.zip ROM via Wifi? and what are the procedures when i do find it?
Click to expand...
Click to collapse
you can ROOT the phone within the phone itself
by downloading Ryzaa One click lag fix from the market
instead of installing the lag fix, select the option to ROOT the phone
Same issue here. Amazing how easy it is to mess this phone up when you are really stupid. Oh well....
Tried the one click lag fix to root it, but cannot find a way to get into download or recovery mode. Tried every button combo I have seen suggested, but either gets stuck in a loop on the AT&T screen or just boots into the OS.
At the moment I feel my only option if we cannot find a way to get into download mode is to format the internal SD card and send it back to o2 (my provider), tell them it fried when Kies tried to do an update, cross my fingers and hope they send me a new one.

I can only enter Recovery mode

Hi,
I installed a bootloader with Odin And after that I needed to Install a GBOOT with Odin but I can't enter dowload mode I only can enter Recovery mode. What do I need to do ?
I used this http://forum.xda-developers.com/showthread.php?t=1117990
What phone do you have?
What recovery version are you running?
How do you get into recovery?
A tad more info would be useful please.
9. Whatever I flash, I end up in Recovery! What should I do?
Flash stock Vibrant bootloaders, then ODIN to stock JFD. You should be good to go here onwards... I only had this issue when I tried changing bootloaders over MIUI/CM7. Couldn't replicate on Samsung ROMs... (AS QUOTED ON THE LINK PAGE)
Thank you for your responds
The recovery mode I run is CWM v 5.0.2.7 .
The thing is Odin can't recognize my phone because I can't enter Downloading mode so I can't flash that.
Hope you can help me further
if you got any rom's stored on your sdcard you could try to flash that and then try to enter download mode, otherwise you could go to "mounts and storage" and mount usb storage there and move over an rom to flash.
Try to flash phone via cwm. Now we have jvz deodexed version on forum. Maybe after it will be ob.
Wysłano z GT-I9000 z użyciem Tapatalk
I've tried to flash a rom from my SD card.
@Emek can you explain it more clearly. I don't understand it.
Grtz William !
There is a rom on here you can flash using CWM. On the forum is a JVZ that you can flash without using ODIn, slap that on your sd card, goto recovery and install from sd and hopefully that should fix it
Sorry of being such a noob. What's a JVZ and which one do I need to flash.
Grtz William
I flashed this one Click
And It still doesn't work...
edit: Tried this one as well Click
It still doesn't work. I hope my phone isn't Bricked. Is he ?
They wont work as you need the correct gingerbread bootloaders installed first.
You ned to make or buy a jig then you can get the phone to access download mode again, and then using ODIN 1.83 reflash everything inlcuding the bootloader.
Jig instructions http://forum.xda-developers.com/showthread.php?t=819551
Failing that, see if you can buy a jig from ebay
Ok thank you. I ordered yesterday a JIG from ebay.
What do I need to do then. What do I need to flash exactly ... I don't want to screw it up another time. I liked the MIUI rom but he didn't recognize the external SD so that's the reason why I flashed other bootloaders.
So I would like to have MIUI with working SD card.
If the SD card doesn't work I won't to flash the original Android.
Grtz William
I would download and flash this for starters, it contains a bootloader as well make sure you click the bootloader section in ODIN.
http://forum.xda-developers.com/showthread.php?t=1380402
Then you can flash a custom rom afterwards, but dont change the bootloader once it works!
buttwad said:
I would download and flash this for starters, it contains a bootloader as well make sure you click the bootloader section in ODIN.
http://forum.xda-developers.com/showthread.php?t=1380402
Then you can flash a custom rom afterwards, but dont change the bootloader once it works!
Click to expand...
Click to collapse
I tried to flash it but Odin said that it failed. But the ****ing thing now is that when I connect my phone to the usb my computer doesn't recognize it and odin doesn't recognize it at well. Please help ! I just want that my phone works !
Anybody please...
Once I was playing with downloading and recovering mode I got into recovery mode then I was unable to get back to normal phone or downloading screen
what I did I pull out battery put out my sim.
I pressed volume up and down and home button togather and then pressed on button it worked out for me you should try that might work for you may be or maybe not.
shez555 said:
Once I was playing with downloading and recovering mode I got into recovery mode then I was unable to get back to normal phone or downloading screen
what I did I pull out battery put out my sim.
I pressed volume up and down and home button togather and then pressed on button it worked out for me you should try that might work for you may be or maybe not.
Click to expand...
Click to collapse
I bought a JIG so I can get into download mode right now so then I flashed the ROM that Buttwad proposed. But ODIN said the proces of flashing failed and no when I connect my phone to my pc my pc even don't recognize my phone so I can't put anything on my phone. What do I need to do. I am desperate.
u can acces the phone sd in recovery..
Am I blind or have you actually FLASHED a Vibrant bootloader over Galaxy S??
Seems like you have issues with key combinations. Try using the Volume down with power button and see if it could get you to the download mode.
Also, if your device is being detected by the phone, use "adb reboot download" to reboot the phone into download mode.
Here is the situation: I had the MIUI rom on my phone but my phone didn't find my external SD. So i searched a bit on the internet and I found a guy who had the same problem and he said that I needed to flash the Vibrant bootloaders so I did that. But then everytime I started up my phone I came in Recovery mode. I couldn't even acces downoading mode anymore. So first I tried to flash two other roms(This one And this onebut the problem stayed the same. So I bought a JIG and then I tried to put this bootloaderon my phone but Odin said ERROR after a while. So then I tried to flash this one.
But now I can't even enter recovery mode. When I start up my phone I see a pictogram with my phone and the pc with the sign that I can't connect them.
And my computer also don't find my phone anymore so I can't flash anything anymore.
Please Help !
I will give 8 euros to the person who can tell me step by step(easy) what I need to do to make my phone working.
how to install miui?

Does he got any chance to survive ?

Hi everybody,
After i tried to install an ICS ROM, I forgot to add the Gapps files on my SD, so on the Recovery Menu i unmount it, put the Gapps files, mount it, and then i reboot cause the phone don't recognize the SD first.
So i get my first boot loop, and discovered the Download Mod that i use with Odin3 to reset my phone to factory.
Odin failed. So now i got my phone that don't turn on at all, i try to pull out the battery, make the combinaison of the Download Mod before i put back the battery while it's USB plug on my PC... nothing work...
So i'm asking now if there's any solutions ? i see that they were hardware stuff to recover my phone but i don't know if there's anything to do first...
Thanks you to read me, and may answer me
flash a stock rom via odin.
Thanks
Thank you, but i can't access to any menu (Recovery or Download mod) :/
" make the combinaison of the Download Mod before i put back the battery while it's USB plug on my PC... " try more times .... if it doesn't work, you'll have to buy or make yourself a usb jig
Thanks
Thank you for your answer... If there's nothing left, i'm gonna try until it's work !

hard bricked, any advice before i use usb jig

soooooooo. I have a i9000m and i wanted to flash it using odin because cwm wasn't working and i googled for vibrant. so i didn't really pay attention to the title when it said ``captivate only`` http://forum.xda-developers.com/showthread.php?t=731989 it went through the odin process but phone didn't restart. it just turned off and stayed off so I unplugged and now, it just shows the at&t world phone white background screen. and keeps restarting. cant get to recovery or download mode. odin doesn't see it either. I read many forums and I think Im going to have to go with the usb jig but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
pankajs37 said:
but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
Click to expand...
Click to collapse
If you click the link below ( My Android Collections), you can try Easy Reboot Recovery..using ADB or the Android Recovery Tools, they have options for various functions, preset by developers
yeah....using adb is the only possibility i would take into consideration too
xsenman said:
If you click the link below ( My Android Collections), you can try Easy Reboot Recovery..using ADB or the Android Recovery Tools, they have options for various functions, preset by developers
Click to expand...
Click to collapse
thanks
pankajs37 said:
soooooooo. I have a i9000m and i wanted to flash it using odin because cwm wasn't working and i googled for vibrant. so i didn't really pay attention to the title when it said ``captivate only`` http://forum.xda-developers.com/showthread.php?t=731989 it went through the odin process but phone didn't restart. it just turned off and stayed off so I unplugged and now, it just shows the at&t world phone white background screen. and keeps restarting. cant get to recovery or download mode. odin doesn't see it either. I read many forums and I think Im going to have to go with the usb jig but before I do Im just wondering if there's another method to get into download mode or some program or adb that can find the phone. thanks
Click to expand...
Click to collapse
I accidentally Flashed a vibrant rom on my i9000. When I finally did get it into download mode with the JIG, I flashed back to stock firmware with ODIN and It totally ruined my phone.... The screen went all crazy and it kept rebooting faster than odin could do anything to it.
Just be careful. Im really not sure what happened But its pooched now for sure. JTAG is my only option on that one
if u dont own JIG or u dont know how to use ADB . the other way is
remove battery from phone /sim card / sd card
take the USB connect with ur Laptop or PC ( dont use it with charger it will not work)
connect with ur phone , then u will see the black screen being lil bit lighter
pres the 3 combos button to enter download mode and then flash ur ROM
this always worked for me , i hard bricked 4 times already my phone :/

[Q] Galaxy SIII I9305. Not start anymore.

Hi! About two weeks ago my phone did not recognize my SIM card. Phone is rooted of course. So I restore my org ROM and sometimes my SIM vas recognized and sometimes not. I decidet to buy a new SIM and SD card reader. After replacing it problem did not go away, so I start diging depper and I found it that my IMEI is null/null. For last week I was trying to do every tutorial, guide and other things on net and of course this great forum to fix it. No luck unfortunatly. Today when I hold HOME+VOL BUTTON+POWER trying to connect in odin mode, here come the wierd thing phone was enter some kind of SDCARD MODE and copy some thing from SD card, there was about four rows of text something like SDCARD MODE, COPYING (I do not know what) FROM SDCARD, COPY FROM SD CARD COMPLETE, (I do no know what). Then phone turned off and do not power up anymore. I was tryin to remove battery. Phone was connected to computer while this wierd thing happen. Have anybody an idea of what happend?
Sorry for my english.
fr!Xy, Regards from Slovenia
fr!Xy said:
Hi! About two weeks ago my phone did not recognize my SIM card. Phone is rooted of course. So I restore my org ROM and sometimes my SIM vas recognized and sometimes not. I decidet to buy a new SIM and SD card reader. After replacing it problem did not go away, so I start diging depper and I found it that my IMEI is null/null. For last week I was trying to do every tutorial, guide and other things on net and of course this great forum to fix it. No luck unfortunatly. Today when I hold HOME+VOL BUTTON+POWER trying to connect in odin mode, here come the wierd thing phone was enter some kind of SDCARD MODE and copy some thing from SD card, there was about four rows of text something like SDCARD MODE, COPYING (I do not know what) FROM SDCARD, COPY FROM SD CARD COMPLETE, (I do no know what). Then phone turned off and do not power up anymore. I was tryin to remove battery. Phone was connected to computer while this wierd thing happen. Have anybody an idea of what happend?
Sorry for my english.
fr!Xy, Regards from Slovenia
Click to expand...
Click to collapse
Recovering IMEI And Data Connection
•Make sure you have Samsung Kies or the Samsung USB Driver installed on your PC.
•Download and Extract: Odin3 3.04.zip - 457.11 KB to your PC if you don't already have it.
•Download and Extract: Param_Bin_I9305.zip - 612.14 KB to your PC. http://d-h.st/Fhb
•With your Phone Switched Off, press and hold: 'VOL DN' + 'HOME' + 'POWER' to enter Download Mode.
•Connect your phone to your PC via USB Cable and start Odin.
•Check your phone is connected by seeing if a COM Port in a Blue box is present under ID:COM.
•Press the 'PDA' Button and select the 'Param_Bin_I9305.tar.md5' file you extracted from the Zip Archive earlier.
•Press the 'Start' Button and wait for it to finish flashing. If successful, you will see a Green Box with 'PASS!'.
•Wait for your phone to reboot then go to your Dialer and press: *#06#. You should now see your IMEI and your Data Connection will be back
Thanks for your help. I tried this for 10 times but no help. But at the moment my phone doesent even power on so I cannot enter odin mode or do anything on it.
Do maybe someone know solution for my problem!?
ensure that the battery is not drained,flash costs much~
you should verify whether the forementioned method have been finished correctly.
method of the guy upstairs has a base,if you didnt achieve,it will not work.
it is the drivers installed in first step, that makes your dead phone recognized in fastboot mode,way to check whether it installed well is the blue(green?) box in the sixth step,if you didn't see it,proved that what you were doing was nonsense.
All above has been done and still can't start,well,
Sent from my GT-I93
SD card mode copy's everything from the sd card to the bootloader or the emmc.. Not sure which one.. But it renders it complete hard brick (not able to turn on at all)
Sent from my GT-I9305 using xda app-developers app
So. Is there any hope for my phone? Or mybe I try to send it to service? If its hard bricked they will not reciognize that phone was rooted and have lost IMEI... Is that right? Or will they see that phone was rooted etc?
fr!Xy said:
So. Is there any hope for my phone? Or mybe I try to send it to service? If its hard bricked they will not reciognize that phone was rooted and have lost IMEI... Is that right? Or will they see that phone was rooted etc?
Click to expand...
Click to collapse
Send it in, you have nothing to lose
OK! I will let you know when phone arives.
sd card mode
After flashing my gt-i9305 from CM 10.1 to Liquid Smooth (Liquid Smooth worked great) and after another reboot, my Phone turned into "sd card mode" or something, and now, i can´t boot to Liquid Smooth, Cwm, Bootloader ,Fastboot, the Led doesn´t work, no usb connection (Odin)!
Today i builded a Usb Jig... on my S2 the Jig was working very well, but on my S3... nothing !
how could this happen? I've followed the instructions, and it was not the first time I've flashed a custom Rom!
Thanks for any support!
fr!Xy said:
OK! I will let you know when phone arives.
Click to expand...
Click to collapse
Your S3 lte basband chip need replacement.
Sent from my GT-N5100 using xda app-developers app
Do anyone know if this can hlep?
HTML:
http://www.ebay.com/itm/USB-Jig-Dongle-For-Samsung-Galaxy-S-III-S3-GT-I9305-LTE-Download-Mode-unbrick-/251386220228?pt=US_Other_Cell_Phone_Accessories&hash=item3a87c94ec4
Usb Jig has only one function on SGS3 and that is to get to download mode where three button cannot .

Categories

Resources