Database Develop

Can't flash radio, no GSM error, need help

Hello
I downloaded the new radio this morning
when tried to flash it to my Trinity I've got "connection timeout" error
now when I start it there is an error "no GSM"
and it freeze in the HTC screen
I searched the forum for all day, flashed alot of radios, hard-spls and so on but didn't manage to flash a working radio
Please give me some instructions or a link the the right thread
I have original HTC rom with SPL-1.30 Olipro
Thanks

exactly the same problem here, need help guys, anyone?

checkout this site for more info that may help you. i had to downgrade/reflash to SPL 1.20 Olipro, flash the new Radio and then reflash to SPL 1.30 Olipro.

I managed to fix it
download this file
http://forum.xda-developers.com/attachment.php?attachmentid=43539&d= 1184192788
in ActiveSync go to connection settings
uncheck the allow USB connections
restart the device in bootloader mode and connect it to PC
run the .BAT file
the device will boot in bootloader SPL 1.2
now you can flash ROM\RADIO
good luck

yes, if you're having trouble flashing radio, please use Hard-SPL 1.20 olipro

wow guys thank you, you saved me 600 eur, i've read around the forum that htc wouldn't have given me warranty rights with the modified rom installed on the trinity, actually the radio update process is around 40% (while it wasn't going further 7% before). So i assume everything is working correctly.
After the radio i'll be installing the UDK4 WM6 again and everything should work correctly now (so to prevent any other less experienced guy to have similar problem, if he wants to upgrade both main rom and radio rom, i suggest is better to upgrade the radio rom before, don't you agree?).
thank you guys, i'll let you know my feedback as soon my trinity is up & running again

thanks you all guys, everything works correctly, i didn't know that we could reinstall any rom with a "bad flash / brick" problem without sending it in htc assistence.
The problem was regarding only the Radio ROM, that was completely missing after the bad upgrade. Didn't have to reinstallo the Main rom (UDK4 In my case).
Thank you all again, i wasn't able to sleep thinking about this thank you can have a good night now
Regards,
Michele!

racerx_ said:
yes, if you're having trouble flashing radio, please use Hard-SPL 1.20 olipro
Click to expand...
Click to collapse
Where to get this? I only find V1.30. Thanks!

download it here .. look at post #85

Thank you very much! I didn't find it!
Bye, Peter

I have a siilar problem. I had flashed radio 1.46 completily the progress were up to 100 %, but when I soft reset the device say "No GSM", only if I put off batery during 10/15 seconds it is all right,
Whats is hapenng????
Any solution????
Thanks

I have the same problem too...
Dispositive info no said nothing about radio version.
I've load Olipro but if I try flash it with a radio version it dont pass of 0%
What can I do?
Best regards

Same 0% problem
Ayasystems, I have the same problem of ROM update not going over 0%... how did you fix it?
Thanks in advance

nirgur said:
I managed to fix it
download this file
http://forum.xda-developers.com/attachment.php?attachmentid=43539&d= 1184192788
in ActiveSync go to connection settings
uncheck the allow USB connections
restart the device in bootloader mode and connect it to PC
run the .BAT file
the device will boot in bootloader SPL 1.2
now you can flash ROM\RADIO
good luck
Click to expand...
Click to collapse
How long does it takes to complete this part of the program?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It seems if he stucks with this part by me. How can I check if it is still working? What do I have to do now? Retry it again? Or..?

I tried many of the solutions here to fix my "no GSM" error message. I even sent it to Pocket PC techs. They "remolded" the chip.?? I don't know what that means or even if I said it right. I recommend their service. BUT, that still didn't solve the problem. I finally bent the sim card brackets down to hold the sim card a little tighter, and it worked. Haven't had any problems since. I spent months and about 100 US to fix this and thank God it works now.
I really think it was a combination of what Pocket PC techs did, plus bending the brackets down. I don't think any of the software fixes helped at all.
Hope this helps out. Blessings all!

It won't start anymore! Help!

I just have this phone, the SPV M700 for a few days. With the Orane brand on it. I also have the SPV M500 (Magician) with big-storage rom on it. So I thought I would know how to do this, but apparently I dont?
I want to update and want to remove the CID and Sim-lock. But first things first, so I want to run Hard-SPL.
So I have downloaded the Hard-SPL file and run it. When I do this, everything goes like it should till the tri-color screen on my pda. After that I get this error in windows (XP):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
En I got this screen on my PDA:
So something goes wrong. I have this also when I try to flash to a Orange rom (I have an Dutch rom on the PDA but I also get this message when try to flash it to an English ROM from Orange. And every other rom) When I put out the battery for 3 sec or just simply do a soft-reset everything seems to work like it did before the I tried flash.
Can someone plz help me, I don't know what to do!

I again got the error with Hard-SPL but someone said to me he had that to and he just went to the next step. So I did to. This time it seemed to work because progress balk was going until 22%. Then it stopped. I did a repair as it was described in the flashing program and now it doesn't start anymore. It goes until this screen and not further:
I can do a hard reset but it still stucks on the same screen. WHAT NOW??

I first get this screen, and just before the text (M 05 / B 05 / D 1.23) disappears, the text NO GSM comes in the blue-area above the D 1.23
This is there for I think half a second and then I have the screen as in my post above.

I have read that I can try 3 things.
NeilM said:
You can try 2 other things!
Download the Radio ROM again- you may have had a downlaod glitch in the 1st one. V1.38 is the best one to try.
Download and install the offical HTC WM5 ROM- this should be a full ROM including Radio, so sometimes completes more effectively. If you are brave, you can them retry the WM6 flash!
Click to expand...
Click to collapse
and
zohaer21 said:
since bricking a hermes i stopped taking chances doing rom upgrades via usb..
the method that is most reliable ad safe is... via SD card
extract RUU_signed file from the upgrade pack (use winrar) and then copy it to the root of a blank sd (mini or micro etc) and rename to TRINIMG.nbh ..enter bootloader and follow the steps.. its fast and most reliable
Click to expand...
Click to collapse
I think that trying the first thing is the best? Retrying to install a new Radio Rom. He suggest to use version V1.38. Is this still the best rom to try it with? Or can I better take a newer/older one?
And where can I find these Radio Roms?

An update how far I am now, I have read about Splxploit
nirgur said:
I managed to fix it
download this file
http://forum.xda-developers.com/attachment.php?attachmentid=43539&d= 1184192788
in ActiveSync go to connection settings
uncheck the allow USB connections
restart the device in bootloader mode and connect it to PC
run the .BAT file
the device will boot in bootloader SPL 1.2
now you can flash ROM\RADIO
good luck
Click to expand...
Click to collapse
How long does it takes to complete this part of the program?
It seems if he stucks with this part by me. How can I check if it is still working? What do I have to do now? Retry it again? Or..?
Click to expand...
Click to collapse
I have done that. I didn't came further than the screenshot above. So I started unbrick.dat again and this time it doesn't go further than this:
Even after another retry to start it, it doesn't go further. It doesn't reach the same status as this picture:
(picture is from http://trinityguides.info/index.php?option=content&task=view&id=22 )
What do I have to do now? I'm stucked again..

Markos said:
An update how far I am now, I have read about Splxploit
I have done that. I didn't came further than the screenshot above. So I started unbrick.dat again and this time it doesn't go further than this:
Even after another retry to start it, it doesn't go further. It doesn't reach the same status as this picture:
(picture is from http://trinityguides.info/index.php?option=content&task=view&id=22 )
What do I have to do now? I'm stucked again..
Click to expand...
Click to collapse
where come you from ?
please write a PM in dutch to me
I will help you

YESS! I have done it, I don't know how but it works again I don't have a clue what I have done. I have done so many things and everytime I get a different respons with the same actions.. But it works!
But now, I want to remove the sim-lock. I have followed the actions in the topic. When I do the automatic way (run AUTO_Unlock_v1.bat) I get this error:
And if I do it this way:
pof said:
If you don't want to install automatically, or for some reason the process doesn't work for you, here are the manual instructions:
Transfer SSPL/SSPL-TRIN.exe to your phone and run it
Tri-color screen will appear
Disable activesync (file -> connection settings -> uncheck "allow USB connections")
Connect your phone to your computer using the USB lead.
Run RUU/ROMUpgradeUtility.exe
Follow the flashing process (Check the "I understand..." and "I completed..." boxes and update!)
Allow your phone to reboot.
Transfer TRIN_Unlock_v1.exe program to your phone and run it
Click the Unlock Button, select unlock option. Select if you want SIM/CID unlock.
Click "Unlock!" and wait until process finishes.
When done, turn off your phone for 10 seconds and reboot after that.
Click to expand...
Click to collapse
I'll get the same Error, ERROR [302]
What goes wrong?? Everything goes like it should, but when I click on Update I get the Error [302]
*dutch:
ik kom uit het gezellige brabant Weet je toevallig ook hoe ik de sim-lock kan verwijderen?

Topic can be closed. I have superCID, no SimLock anymore and a cooked WM6 on it!
*Markos loves xda-dev

[Q] Stuck in cyclic restart after Radio ROM upgrade!?!

Hi, i am from Turkey,
I have a Touch Diamond (Diam100) bought from Norway. I just loaded a new radio ROM onto my phone (I am security unlocked and sim unlocked and hard SPL'd, thanks to Olinex!) and everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load
However - it is completely stuck in a cyclic reboot. I get the HTC startup screen and then it just reboots again and again. I tried a hard reset and got the confirmation message that it was restored OK, press volume up to boot. However it does the same reboot again and again
I tried some thing like that:
*Try to install "RUU_Diamond_HTC_NOR_1.93.409.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship" stock rom, but it freezes at %13
*Try to install stock radio rom "Diamond_Radio_1.00.25.05" bu it freezes at %95!
*Try to install stock spl, everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load but the problem seems again!
i can install cooked roms, but after restart this problem happens again and again!
Can you help me please? I love my phone very much.. (
(sorry for my poor english)

Hi, try MTTY your phone. log in to use search in these fora and find "The definitive MTTY thread". It's a bit of...homework to do but will get you out of this.Your issue is caused by certain undeleted items which remain after a rom flash as far as i've learned.I hadn't have to do it until after several ROM flashes but guess sooner or later everybody faces it.Well it's time you did it too...
Cheers

[email protected] said:
Hi, try MTTY your phone. log in to use search in these fora and find "The definitive MTTY thread". It's a bit of...homework to do but will get you out of this.Your issue is caused by certain undeleted items which remain after a rom flash as far as i've learned.I hadn't have to do it until after several ROM flashes but guess sooner or later everybody faces it.Well it's time you did it too...
Cheers
Click to expand...
Click to collapse
hi, i tried it step by step. but nothing happens

Hi,
Dude, that's frustrating, however as i understand it's a stock SPL you've presently got on your phone, right? I don't know which SPL version you've had before but just in case, try to update to HSPL version 1,93. Then try flashing a ROM you like.If problems persist MTTY your phone again after having upgraded HSPL.
And a word of advice based on own experience: Not all radios are compatible with all ROMs and vice versa...
Hope you're soon going to get this right,
Regards from Greece

merinos said:
Hi, i am from Turkey,
I have a Touch Diamond (Diam100) bought from Norway. I just loaded a new radio ROM onto my phone (I am security unlocked and sim unlocked and hard SPL'd, thanks to Olinex!) and everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load
However - it is completely stuck in a cyclic reboot. I get the HTC startup screen and then it just reboots again and again. I tried a hard reset and got the confirmation message that it was restored OK, press volume up to boot. However it does the same reboot again and again
I tried some thing like that:
*Try to install "RUU_Diamond_HTC_NOR_1.93.409.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship" stock rom, but it freezes at %13
*Try to install stock radio rom "Diamond_Radio_1.00.25.05" bu it freezes at %95!
*Try to install stock spl, everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load but the problem seems again!
i can install cooked roms, but after restart this problem happens again and again!
Can you help me please? I love my phone very much.. (
(sorry for my poor english)
Click to expand...
Click to collapse
before you upgrade the radio, whether it has been unlock device with the XDA Unlock Application ..? try to hard reset your device after that make sure the device go to the boot loader (3 colors screen) and reflash with the official ROM!! then unlock the device and immediately you can do to upgrade the radio (at the time of upgrading the radio make sure the SIM card removed)

[email protected] said:
Hi,
Dude, that's frustrating, however as i understand it's a stock SPL you've presently got on your phone, right? I don't know which SPL version you've had before but just in case, try to update to HSPL version 1,93. Then try flashing a ROM you like.If problems persist MTTY your phone again after having upgraded HSPL.
And a word of advice based on own experience: Not all radios are compatible with all ROMs and vice versa...
Hope you're soon going to get this right,
Regards from Greece
Click to expand...
Click to collapse
hi, i can not change the hspl, i tried again and again, but nothing changed.
(hspl olinex 1.93 signed and unsigned versions)
i tried to change the hspl to stock spl, installation was going and everything was ok (%100 inst.) but after restart, spl 1.40 olinex in bootloader mode again!
i don't know how can i change this 1.40 spl. i think the main problem is spl and radio rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hakim Rahman said:
before you upgrade the radio, whether it has been unlock device with the XDA Unlock Application ..? try to hard reset your device after that make sure the device go to the boot loader (3 colors screen) and reflash with the official ROM!! then unlock the device and immediately you can do to upgrade the radio (at the time of upgrading the radio make sure the SIM card removed)
Click to expand...
Click to collapse
hi, my device is security unlocked, and hspl version is olinex 1.40.
i can not acsess to os, it just stay in the touch diamond screen .
thanks for the solution.

merinos said:
hi, my device is security unlocked, and hspl version is olinex 1.40.
i can not acsess to os, it just stay in the touch diamond screen .
thanks for the solution.
Click to expand...
Click to collapse
you have to do is to Hard Reset your device and reFlash

[Q] HTC HD7 Bootloader Problem - Help Please

So I have been trying to upload my HD7 to the new Mango build.
My friend who I work with did the same he has the same phone, he updated his following the instructions on your site and then went to do the same to mine after. But I got an error. When I go back into the bootloader mode I get this..
RED Section - PD29100 SS-BC (4k)
Green Section - *empty*
Blue - *empty*
White - *empty*
Is there anyway to reflash the RAM on reinstall the bootloader? Or do I have to wait untill the update comes out and update through Zune?
I have also tried the RUU flash ROM but it I have no luck because of this bootloader problem.
Any help would be great thank you.

I have same problem, damm

well three then.. anyone get any luck?

I still have no information about how to fix this, I ve tried every possible Google search I can think of and I have no information at all.
Where has all the help gone?

i´ve triedd by Zune use recovery gives error
spl dont seem´s to work..
"rtc to rtm" update must use Zune dont work either
i was using last HTC mango rtm and was trying to get new DFT...
Only HD7 having trouble?

Boot Loader Problem
So I have been trying to upload my HD7 to the new Mango build.
RED Section - PD29100 SS-BC (4k)
Green Section - *empty*
Blue - *empty*
White - *empty*
Is there anyway to reflash the RAM on reinstall the bootloader? Or do I have to wait untill the update comes out and update through Zune?
I have also tried the RUU flash ROM but it I have no luck because of this bootloader problem.
If there is any solution would be great thank you.

did you know the term "BRICKED"?.... Sorry but this is what you have done. You have wiped out your SPL so no, those are bricks, no zune update or anything will fix that as far as i know... Appologise for the bad news...

Hi
your windows phone start normaly? or when power on phone enter bootloader?
any way 2 soultion for fix problem,
1- ithink fix (80%) your problem by this ( GOld Card) if you can enter usb host
and download orginal room
for more information see this page
http://forum.xda-developers.com/showthread.php?t=893152
warning
if gold card process complete succsecfully fix bootloader and flash orginal room
else
maybe fix bootloader without room or dontfix bootloader and erease perv room
2- u can fix problem 100% work but you need to riff box and jtag
formore information search jtag and riff box
plz report if fix your problem
sorry for bad english
good luck

Thaks for your help, but that "Gold Card" seems a litle complicated..
and since the phone is working good ,except when trying enter SPL mode
ill try to use it like this for a few days and then go to some HTC support to try fix the SPL boot loader.

ricardo1410 said:
So I have been trying to upload my HD7 to the new Mango build.
RED Section - PD29100 SS-BC (4k)
Green Section - *empty*
Blue - *empty*
White - *empty*
Is there anyway to reflash the RAM on reinstall the bootloader? Or do I have to wait untill the update comes out and update through Zune?
I have also tried the RUU flash ROM but it I have no luck because of this bootloader problem.
If there is any solution would be great thank you.
Click to expand...
Click to collapse
Ricardo, dude did you want to true a copy my post word for word more then you have already?

Cotulla said:
Issues with MANGO RUU ROMS.
List of such ROMs:
It's not full list. Maybe some other ROMs affected by this too.
Thread about this ROMs.
RUU_Gold_S_HTC_Europe_3.02.401.01_Radio_5.69.09.29 a_22.50.50.21_Signed_GOLD_RELEASE.exe
RUU_Mozart_S_HTC_Europe_4.06.401.00_5.69.09_RELEAS E.exe
RUU_Mozart_S_HTC_RUS_4.06.411.00_5.69.09_RELEASE.e xe
RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.0 9.29a_22.50.50.21_Signed_SCHUBERT_RELEASE.exe
RUU_Spark_S_HTC_Europe_4.06.401.00_5.69.09_RELEASE .exe
About issue:
After running RSPL on MANGO OSPL, you can't flash device via SPL.
Windows Phone 7 OS is still booting and working.
Instead of full SPL screen you will see only one the first line:
You device will be "HALF BRICKED", because you can use OS, but can't flash anything else.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
At the current moment it's IMPOSSIBLE to recover such devices. And I am not sure it will be ever possible.
What you must NOT do:
Before running RSPL wizard check your SPL screen.
There current SPL version at top: "X.Y.Z 2250 "
When wizard asks you to choose your current SPL version, be sure it's present inside versions list.
If your current SPL version doesn't present in the list, you can choose nearest version, BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
Generally it means that you must NOT run RSPL wizard after MANGO RUU ROM installation. You must flash older version (with 7004 or NoDo) and then run RSPL.
Installed OS version doesn't important. Only SPL version important.
Click to expand...
Click to collapse
here is what we did wrong..
read carefully this thread:
http://forum.xda-developers.com/showthread.php?t=1195647

IJS1985 said:
ill try to use it like this for a few days and then go to some HTC support to try fix the SPL boot loader.
Click to expand...
Click to collapse
htc can,not help you, and you should go warranty and 50$ for jtag i

wow that is bad news.. i have bought my HD7, 2 weeks ago, i can return it in the firts month but it was the last of the store.. and i think they wont have it any more.. WP7 is desapearing from stores around here..
and i have no idea were i can get a jtag around here..

Updates
Is possible when microsoft lunch the updates to fix this issue ??
Thank you

same problem here

Stupid
Same error - ROM device fails during installation! Screen in three colors and text on one line: - PD29 *** SS-BC (4K).

Yeah, Sorry guys, but you absolutely HAVE to downgrade to WP 7.0/NoDo. You cannot install RSPL/HSPL while you use a MANGO rom. At all. No exceptions. You'll end up with a working, but non update-able device.
So to future SPL installers, DOWNGRADE YOUR MANGO DEVICE TO NoDo FIRST!

acidhax said:
Yeah, Sorry guys, but you absolutely HAVE to downgrade to WP 7.0/NoDo. You cannot install RSPL/HSPL while you use a MANGO rom. At all. No exceptions. You'll end up with a working, but non update-able device.
So to future SPL installers, DOWNGRADE YOUR MANGO DEVICE TO NoDo FIRST!
Click to expand...
Click to collapse
How 2 do this?

Any luck the Mango update?
havent seen ¡t yet

Bad news
The only solution is to repair bootloader via JTAG method! The warranty does not apply!
I do not think MANGO update will solve the problem ... they told me.

Fix bootloader without goldcard

Requirement:
-Y Cable
-USB Memory (I used USB adapter and SDcard 8Gb)
1.- If you don't have Y cable you can make it
2.- Test your Y cable
2.1.- Put the USB adapter on your pc to test it, if the windows read the SD card, your cable working!!.
3.- Format the SDCard (FAT32)
4.- Copy the NBH file to USB(I used RUU_Schubert_HTC_Europe_1.54.401.01_Radio_5.51.09. 29_22.32.50.10U_by_ansar)
5.- Rename the file (SPL_signed.nbh --> SCHUIMG.nbh)
6.- Conect the cable with USB adapter (turn off phone)
7.- Put your phone on "usb mode" (Vol Down + Camera botton + Power)
the phone will start read the memory immediately, sometimes the phone don't start on "usb mode", for a few minutes don't happen nothing, after that the phone autorestart and read the sdcard
When the phone upload the SCHUIMG.nbh, you will fix the bootloader and Downgrade after all process used DFT_XSPL_WP7FG1 and change the Rom!

u mean use a sdcard to usb adaptor?
any pictures to show?

does this work on semi-bricked devices?
has anyone tried this?

biernes_atrece said:
does this work on semi-bricked devices?
has anyone tried this?
Click to expand...
Click to collapse
Yes this can work for semi/small bricked devices.
It's basicly the the same process and principal as the goldcard method except that you don't use the goldcard tool and image to turn the SD card into a goldcard.
You should also use your devices specific stock/shipped rom. The rom in the OP is for Europe devices.
You can find out which specific rom you need to use by the last 3 digits of your "Firmware Revision Number" eg, .401 = HTC Europe operator. .531 = TMOUS operator.
If you want you can post back your devices Firmware revision # and I can tell you which rom you need to use.
If you use a device specific Pre-NoDo or NoDo rom and downgrade the devices SPL to at or below 3.xxx you can then install XSPL (RSPL/HSPL) to the device and then flash a custom rom of your choice.
There's the goldcard tutorial here, which also will repair semi/small bricked devices too and it has the links to the stock/shipped roms.
http://forum.xda-developers.com/showthread.php?t=1597837
If you need any help just let me know!

xdrc45 said:
Yes this can work for semi/small bricked devices.
It's basicly the the same process and principal as the goldcard method except that you don't use the goldcard tool and image to turn the SD card into a goldcard.
You should also use your devices specific stock/shipped rom. The rom in the OP is for Europe devices.
You can find out which specific rom you need to use by the last 3 digits of your "Firmware Revision Number" eg, .401 = HTC Europe operator. .531 = TMOUS operator.
If you want you can post back your devices Firmware revision # and I can tell you which rom you need to use.
If you use a device specific Pre-NoDo or NoDo rom and downgrade the devices SPL to at or below 3.xxx you can then install XSPL (RSPL/HSPL) to the device and then flash a custom rom of your choice.
There's the goldcard tutorial here, which also will repair semi/small bricked devices too and it has the links to the stock/shipped roms.
http://forum.xda-developers.com/showthread.php?t=1597837
If you need any help just let me know!
Click to expand...
Click to collapse
thanks for reply.
my frn is 2250.21.51201.728
but i cant do a thing right now since i sold my laptop and wanted to buy a new one. i only got the surface right now.
ill tinker with my phone after i get the new pc

biernes_atrece said:
thanks for reply.
my frn is 2250.21.51201.728
but i cant do a thing right now since i sold my laptop and wanted to buy a new one. i only got the surface right now.
ill tinker with my phone after i get the new pc
Click to expand...
Click to collapse
Oh ok.. Well when your ready and if you need help just let me know.
.728 = HTC Asia SEA operator.
So you can use this rom to extract the ruu_signed.nbh file and rename it to SCHUIMG.nhb for the Y cable method or goldcard method.
http://www.mediafire.com/?w5x5y51fst2gccy

Here some pictures!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Work in semi-bricked!

my device firmware revision number is 2250.21.40505.502
its bought from AT&T us
and imported in india...
pls tell me which rom I must used to recover my device...
thanks

Try this: RUU_Schubert_HTC_Europe_1.54.401.01_Radio_5.51.09. 29_22.32.50.10U_by_ansar

Again and again, the troll...
Magpir said:
u mean use a sdcard to usb adaptor?
any pictures to show?
Click to expand...
Click to collapse
This user really shows some attention deficit or a mental disorder, sometime he's a "newbie" and other times he's an expert at ROM flashing...
Some examples of the not so newbie:
Magpir said:
4.5 allows u to downgrade to nodo
1) flash downgrade to nodo
2) run the cotulla DFT tool
3) install custom rom
Click to expand...
Click to collapse
Magpir said:
u dont need to downgrade to NODO or any earlier version but however take care not to unkowingly update yr bootloader by flashing a stock rom
This happens if u update yr phone in zune or flash a stock rom that comes with the bootloader inside it
because zune updates come with bootloader
Updated bootloaders will lock yr phone and prevent u from flashing custom roms
Click to expand...
Click to collapse
Diagnostic: posting just to increase his numbers...
Total Posts: 1,536
My advice help whoever ask for help, except this so called "newbie"...
Now I know why some developers have left XDA...