when i start sgt-p1000 it just starts with a
phone
exclamatery mark
and pc icon, and i cannot enter download mode
Dont know what to next please help.
You are in download mode - your tab needs you to connect to a pc running odin3 software, and you need to flash a rom file.
How did you get your tab to this place?
Related
hi all ia have this galaxy s2 gt 1900 g indian version ..
i read this article to easily root i follwed it to the t below steps..my version is 2.3.3 XWKH8(or was it xwkdd..forgot..hell)
"Tools Needed:
ODIN Downloader (Download it from here)
USB Data Cable
XWKDD Kernel (Don’t extract it after download, it will use in the Odin process)
Download SuperOneClick
Download Samsung’s KIES 2.0 (Download links: Link1 , Link2 )
And Ofcourse, A Personal Computer(PC) or Laptop.
Procedure:
Step one: First of all make sure that you have download and install all the needed software. Then, Put device in USB debugging mode: Settings ->Applications -> Development -> USB debugging.
Step Two: Reboot your device in the download session mode. To get enter in the download mode of Samsung Galaxy S2, switched off the device and turn it on again by holding Volumedown button + Home button and Power button simultaneously. You will surely reach to the download mode. You can get yourself confirm by identifying same as below mention picture as on your phone screen.
Step Three: Open the ODIN Downloader which you had downloaded and installed it on your pc.
Step Four: Now, with the help of USB Cable connect the device to the computer while keeping the Odin open then wait for the few seconds then odin notified you that the device is connected to the computer. Select the checkboxes next to “Auto reboot” and “F. Reset Time” and kept default else options. After all this, press “PDA” Button and select the XWKDD_insecure.tar file which you have downloaded on your pc before.
Now Press “Start” button, after this pressing the start button ODIN will flash the kernel and after flashing it phone will reboot."
>>> however the phone is not booting...its getting stuck in samsung logo with yellow traingle below...wht could be wrong
pls help
i again went in dowlnloading mode..it says custom binary download: yes (3) counts,..i treid odin 3 times mayb bcoz of that
I think you're lost.
This is the forums for Galaxy S1 GT-I9000
The Galaxy S II I9100 forums can be found here: http://forum.xda-developers.com/forumdisplay.php?f=1055
Hello,
I have been using some release candidates of ICS which were available here on my i9000. Everything worked out generally fine. Sometimes my phone crashed and then it wouldn't want to go further than my i9000 and afterwards the google screen. Both screens would just repeat endlessly without the phone doing anything.
When this happened, I was always able to go back to recovery mode and uninstall everything and reinstall the rom. This would always solve my problem.
Now here is my current issue: on Saturday my phone crashed again, but now I can NOT enter recovery mode any more. Whenever I plug in a usb cable or normal cable to charge my phone it shows the calculating sign and after a few secs it's gone and starts all over again instead of showing the green battery slowly getting full.
The only thing which works is getting into download mode. So I tried to get odin to work. I installed kies to get the usb drivers and I opened odin (on both windows and a mac), but it does NOTHING.
Is there any other way I can reset my phone to get it somehow working again? Is there another way to get into recovery besides the buttons or using odin? I know of ADB but that requires the phone to be on....
When you plug your phone in (and enter download mode) what device type does windows detect it as?
Because you can get to download mode normally a "good" sign that it isn't bricked (and even when "bricked" it can be un-bricked)
Edit
Just tested mine, entered download mode and odin shows it connected on Com6, device manager shows it connected as a "Samsung Mobile Modem"
try and install the samsung modem drivers separately then try and connect connect
Hi,
first, be sure that all Kies-services are disabled via Taskmanager otherwise ODIN wont work correct!
then Bring your SGS1 to the Downloadmode, connect the USB_cable at the phone.
fullfill all sections you need in ODIN (PDA-Kernle, CODE-modem, CSC-CSC, pitfile512) klick repartition on
then connect your SGS1 via USB to the PC
Odin will show "connected"
Press start.
http://www.youtube.com/watch?v=1RoZU5ZPMS4
if your still stuck checkout this video might help good luck
Hi
I wanna return to stock 3.2 via pc odin.
But whenever i tried to open download mode, saying continue "Charging process" is starting.
I am using AOKP ics 35
Thanks.
Suggestion
Hey do you have the samsung drivers also installed on your computer? It wont go to ready/start mode in odin3 until the drivers are installed if you do that you should have no problem returning to stock with odin...I just had to do that last night in order for odin to recognize my tablet...I would post links but I cant yet :?
Here is a copy of the Samsung driver attached.
http://netload.in/datei6vGwThaewb/SAMSUNG_USB_Driver_1.5.4.0.zip.htm
It's about 23MB in size. Download to desktop, unzip, and install
I bricked my galaxy mini (gt-s5570) one year ago while trying to flash a rom to it. Now when i try to unbrick it odin wont recognize it while it is in download mode. Widows does atleast realize that i connected a device but it is not recognizing it. i have tried multiple borts on my computer but none seem to work. Also while in download mode i only see the picture and "Downloading...", no "do not turn off target!" like i see in many pictures. Anybody know how to fix this? i have tried multiple unbrick tutorials but either i get stuck in "setup connection.." in odin while in ramdump or in android system recovery on my phone.
You don't need to say "do not turn off target" in your mini, it's normal.
Try download drivers (from Kies) and try again, or you can try with another PC.
hello, I tried to return to the android 2.3.3 from android 5.1 using Odin, however I failed and whenever I turn on my S1 it shows the icon of connect you phone to pc, I can access download mode yet not the recovery mod, please help me (my dad want to use the phone and android 5.1 wasn't easy or stable for him)
Thank you guys.
You need to try and flash again using ODIN while under download mode. Is there a specific error message that pops up? Did you make sure all files in the stock ROM has been selected in the right categories?
gsstudios
icon of connect you phone to pc this means u bricked your device so only it shows icon like this so no pbm just try to connect your USB cable to system as like before u use odin(Turn off device->Connect one edge of USB in system-> then long press button combo along with usb Cable inserted) Again it "shows icon of connect you phone to pc"
but the device will be connected to system and check odin yellow color glows means no pbm flash stock if not means try USB jig