[Q] No USB Connection - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi
I have recently updated to Ametris ROM RC2(http://forum.xda-developers.com/showthread.php?t=1189676) with speedmod kernel. I have Galaxy S I9000 with 2.3.4 XXJVR firmware.
After the update I am not able to connect via USB. I have updated to latest Kies and updated driver connection also. When i plug in , the phone charges, but there is no indication of usb connection(Even in development mode)
Pls help

karthik0808 said:
Hi
I have recently updated to Ametris ROM RC2(http://forum.xda-developers.com/showthread.php?t=1189676) with speedmod kernel. I have Galaxy S I9000 with 2.3.4 XXJVR firmware.
After the update I am not able to connect via USB. I have updated to latest Kies and updated driver connection also. When i plug in , the phone charges, but there is no indication of usb connection(Even in development mode)
Pls help
Click to expand...
Click to collapse
Make sure that on your phone mass storage is ticked.

Tried all possibilities and with different computers/ports. Finally, i canverted back the file system from ext4 back to rfs. Seems to work now

karthik0808 said:
Hi
I have recently updated to Ametris ROM RC2(http://forum.xda-developers.com/showthread.php?t=1189676) with speedmod kernel. I have Galaxy S I9000 with 2.3.4 XXJVR firmware.
After the update I am not able to connect via USB. I have updated to latest Kies and updated driver connection also. When i plug in , the phone charges, but there is no indication of usb connection(Even in development mode)
Pls help
Click to expand...
Click to collapse
Maybe a problem with the ROM? Is it worth posting the question in that link you supplied?

I am not allowed to post question in that thread

i had a simular issue, seemed to fix it self once i turned on USB DEBUGGING

Done that too

Put your phone in download mode then connect it to your pc. This will install the drivers automatically.
Sent from my GT-I9000 using XDA App

Related

[Q] HELP USB Problems with the computer

Hello Everybody!
I've had a lot of kind of firmware in my SGS, at the momment I've a Jimmy's/Hamster's lastest Rom but the problem is common with all of Roms. I've a problem with the recognition of my SGS in my computers, it was working fine and suddenly it's not working. I don't know why and I've tried with a lot of kind of drivers... the result is the same, the device is not recognized by Windows 7 and XP (the laptop).I've tried with KIES and Mass Storage Mode but nothing
Somebody know how to fix it o any idea?
I'm starting to think my mobile plug is broken or something like that, but when you plug the wire to the mobile in all modes, it seems working fine in the mobile screen, but in the computer is not recognized.
Thank you very much everybody...
Not an expert, but I found a similar problem and there has been a couple of solutions;
a) Connecting to a laptop which was using both USB's, but the power used by the other slot was too much for the phone to be recognised. Even though the phone was connecting and charging it would not be recognised in Kies. I removed the rest of the USB's unplugged phone reconnected and it was found.
b) Downloaded the latest KIES from samsung webpage, and installed. I closed Kies, then connected the phone and it came up as a USB device. Then I started Kies and was recognised.
Hope it helps...
I've just update my issue with more information, but I tested both possible solutions that you told me but it didn't solve my problem.
There are more information here, thanks in advance
I have a SGS:
GT-I9000
Fw: 2.2.1
Kernel version: 2.6.32.9 hardcore speedmod-k12g-256hz #50
Build number: Hamster Roms V6.2
PDA: I9000XXJPY
PHONE: I9000XXJPY
CSC:I9000OXAJPY
Build Info: 2010. 12
ClockworkMod Recovery v2.5.1.0 SpeedMod ULFK
The problem is that my PC doesn't recognize my SGS.
I've the last KIES version (I've tested download only the drivers, but i could get nothing...)
I've tested in two differents PCs, Windows 7 and XP but nothing.
I was testing a lot of ROMs but really I don't know when it stopped working. I think the last update with ODIN, when it was working, was to update to SO_zImage_opt_ext_root_JPM-JP6_V4_1_OC but I'm not sure. Later I've update my SGS from CMW many times.
I've tried to access by Mass Storage and Samsung Kies but nothing...
The are some extra symphtoms:
When I connect to the charger, in my SGS is activate automatically the MTP application for KIES.
When I connect to my PC, I receive the next warning: USB Device Not Recognized: one of the USB devices attached to this computes has malfunctioned, and Windows does not recognize it....
I've update my last firmware wit WIPE option from CMW, tested with and without LAGFIX but nothing.
I think that something is wrong about the compatibility or updating proccess, but I can't access to connect my UBS in my computer, neither to ODIN with DOWNLOAD mode because my PC doesn't recognize it.
Are there any way to get my PC recognized again my SGS?
Are there any way to know if the problem is anything incompatible with Kernel version and Firmware, or anything like that?
Is normal my SCS being different that PDA or PHONE?
If somebody knows, please help me.
Thank you very much

Help! Odin3 can't find ID:Com of I9000

My I9000's Rom is SuperAOSP 8.6, when the phone was connected with pc by USB, odin3 can't find it's ID:Com.
It means I never can update my phone's rom. Please help me!
dneking said:
My I9000's Rom is SuperAOSP 8.6, when the phone was connected with pc by USB, odin3 can't find it's ID:Com.
It means I never can update my phone's rom. Please help me!
Click to expand...
Click to collapse
Try different usb port, different usb cable and were you on the download mode when trying?
Look here for my experience and click the thanks if it helps. Mine's been fine ever since cleaning but the drivers could also be the issue (a lot of people have that issue).
http://forum.xda-developers.com/showthread.php?t=993860
For me, installing samsung kies program (which included drivers) did the trick, lol
I had that issue once. When I flashed deodexed JVK, my phone had problems detected by computers. And I mean computer"S". I installed and uninstalled several drivers and even clean my USB. Nothing worked. I was told that the ROM or something I did changed the phone's characteristics. Therefore, your phone ain't have drivers for it no more.
I sent my phone for repair. Thank God, they warranted it.
usb issues
Hello everyone.
I'm desperate, after upgrading from odin, a gingerbread 2.3.4, I can not connect via USB in any way, or download, or mass storage, kies ...
as I am not root, I can not install a new kernel from cwm
I can not do anything to have recovery 3e
Anyone know solution?
these are the data now:
Firmware: 2.3.4
Base band: I9000JVP
Kernel: 2.6.35.7-CL264642 se.infra I9000JVP-SEP-40 @ # 2
Compilation: GINGERBREAD.XXJVP
Its a long shot but heidall? Also try another usb port/cable? I've even installed ubuntu before to help diagnose.
Sent from my GT-I9000M using XDA Premium App

[SOLVED] P7300 can't connect via USB, Windows 7 64

Used to work fine, last time I connected was doing an upgrade about 3 weeks ago to the UCLA modem and kernel and 2.3.6 ROM.
Today I tried to connect via USB to transfer a new book I'd downloaded, and Windows didn't recognize the device. Has the error USB Device not recognized.
It shows on the device in the status area that MTP is installed, and it says on the device that USB is connected.
Tried everything. I have the latest version of Kies, uninstalled and re-installed. Deleted the device, let windows re-install it. The tablet charges fine via the same cable. I've tried different USB ports.
My Samsung Galaxy S2 Skyrocket connects on the same computer, seen by Kies, can transfer USB. Works on the same USB port!
And of course I have USB debugging turned on.
Any thoughts. I am certain it was due to the change of ROM.
Bump........
Hi Harry_fine,
Try it :
- Disable usb debug mode
- Lock the screen <-- very important step.If you don't do this, kies doesn't recognize the Tab*
- Connect Tab via USB to Win7 64Bit
- Start Kies
To get kies to recognize the tab, you need to have the original touchwiz launcher set as the default launcher
I seen this on other post. May be it can help you.
Good luck.
harry_fine said:
Used to work fine, last time I connected was doing an upgrade about 3 weeks ago to the UCLA modem and kernel and 2.3.6 ROM.
Click to expand...
Click to collapse
Are you sure you are in correct forum? I have never heard about UCLA modem or 2.3.6 ROM for GT8.9
Latest modem we have is KJ6 and Android version should be 3.2
Sorry, I was confusing this with my Galaxy S2 Skyrocket.
This is 2.6.36.3 kernel, Android 3.2, which I think is the latest official stock for the Tab. I think I used P7300XWKL4_P7300ATOKI1_P7300XXKJ6_HOME.tar.md5 for the upgrade.
Didn't work, same problem. Anyone else?
Tried a solution I found online, found some very long file extensions on the SDCARD, removed them, rebooted phone, and now no problem connected as a drive using MTP, and installing driver.
so what's the solution??
lastiko said:
so what's the solution??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=31929746&postcount=236
Simply install the drivers, reboot the PC, then connect the device.
subtil123 said:
Hi Harry_fine,
Try it :
- Disable usb debug mode
- Lock the screen <-- very important step.If you don't do this, kies doesn't recognize the Tab*
- Connect Tab via USB to Win7 64Bit
- Start Kies
To get kies to recognize the tab, you need to have the original touchwiz launcher set as the default launcher
I seen this on other post. May be it can help you.
Good luck.
Click to expand...
Click to collapse
it really works out.......thank you :good:
i have a galaxy note 10.1 and it didnt recognize not even the Adapter Cable.....
I have Samsung P7300
just want to root it, but my PC does not even recognize it. not even Kies..
done all the things searching on XDA and other sites, but still the same Problem,
I cant even find the MTP thing under USB Storage.
I can Connect my Samsung galaxy S Plus i9001 to it.
i have installed/uninstalled Drivers, and kies many times.
My problem is why there is NO MTP Option in this device, it is not even rooted.
.

[Q] Cannot connect to kies

hey guys
i am not able to connect to kies.
It always show some error asking to activate usb debugging and says connect in pc studio mode
i uninstalled and reinstalled kies but still not working
when i connect my phone to pc it recognizes the hon and also starts charging
plz help
sitanshu91 said:
hey guys
i am not able to connect to kies.
It always show some error asking to activate usb debugging and says connect in pc studio mode
i uninstalled and reinstalled kies but still not working
when i connect my phone to pc it recognizes the hon and also starts charging
plz help
Click to expand...
Click to collapse
Disable USB debugging.
i have disabled usb debugging but sam problem continues ..
this has happened after i got an update on kies
Update Kies and also try different USB ports.
tried all things but cannot connect to kies
the message is shown as
reconnect the device in samsung kies mode
current connections not supported by kies
i have disabled the usb debugging mode from setting>application>development>usb debugging
can someone help me with this
thanks
I have the same problem. Anyone know what to do?
Same problem here.. think it's modded ICS rom related... hope it'l get solved once official ICS gets released...
Sent from my GT-N7000 using xda premium
im on stock LA4
On my build I've found that my front usb ports fail when connecting to kies 99% of the time, but back ports are pretty reliable.
I take it you don't have root or cwm? These will affect kies connection. Also if you've frozen any samsung apps, it's likely kies will fail. To be honest, even when I was fully stocked it failed often, buggy as hell.
Another thing to try, put it in usb storage mode, connect in a back port so it loads drivers, disconnect. Then attach in same port in normal mode. Sometimes this can help. If no luck, try kies wifi after having attached in usb storage mode.
Good luck.
Sent from my GT-N7000 using xda premium
No root and kies wifi also fail :/
Had the same problem. Windows 7 home, 64-bit.
Today I shut down the Samsung Note, then put it on again and ..... no problem with the connection to KIES. I hope it will connect again tomorrow and on.
Actually i unonstalled the kies firat and then all samsung drivers(this is imp. And must)......reinstalled them and connected the phone
Now all good kies recognises my phone
Sent from my GT-N7000 using xda premium
ICS and Kies are not compatible.
Sent from my SGH-I777 using XDA
CaliCal said:
ICS and Kies are not compatible.
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Kies is there only on Samsung issued firmware..
Kies will not work on anything that is custom .. be it GB or ICS
Seems this problem has resurfaced. I am on ICS - upgraded via Kies, then rooted.
Now Kies gives me the 'usb debugging' error, regardless of what is set for USB debugging and will not connect.
This is an updated Kies - and it appears there is an updated HK ICS rom out.
Comments?
Thanks

[Q] Galaxy s CM9 ADB USB problem

Hey guys!
My Galaxy S I9000 is running on CM9 nightly 08, and kernel IcyGlitch b6, and on my netbook i'm running win xp 32bit; the problem is that i'm not able to get my device connected with adb through usb port. I've tried installing automatically and manually the drivers, but without success. Also i've installed Kies (latest version), but whenever i connect my device, kies tries to start the connection, but it stays in that state without connecting to the device.
How did i manage to get adb (through usb) working?
Thank you anticipately!
capez said:
Hey guys!
My Galaxy S I9000 is running on CM9 nightly 08, and kernel IcyGlitch b6, and on my netbook i'm running win xp 32bit; the problem is that i'm not able to get my device connected with adb through usb port. I've tried installing automatically and manually the drivers, but without success. Also i've installed Kies (latest version), but whenever i connect my device, kies tries to start the connection, but it stays in that state without connecting to the device.
How did i manage to get adb (through usb) working?
Thank you anticipately!
Click to expand...
Click to collapse
Hi , as you are running a port of the nexus ics firmware you need the samsung nexus drivers on your netbook (SCH 1515 is the nexus), i9000 drivers from samsung are now no use .Please make sure you have usb debugging enabled on your phone also.
I installed that driver, but it doesn't work
I have the same problem too. So odin for gt i9000 is not suitable also? I'm confused. I'm using slimICS.
Sent from my GT-I9000 using Tapatalk
ADB works for me!
I had the same problem with ADB, did not change the driver but did change the USB mode to Media device (MTP) . Settings - Storage - Menu - USB
This then worked fine for me.
I cannot find what you said; the only way i found MTP was in recovery, under DEVIL option
capez said:
I cannot find what you said; the only way i found MTP was in recovery, under DEVIL option
Click to expand...
Click to collapse
Go to settings>storage>options>usb computer connection>media device (MTP)
Which rom are you using?
SlimICS 3.4. If you're using an ICS rom, there should be an option.
Sent from my GT-I9000 using Tapatalk
network problem with cm9 ics 4.0.4 for galaxy s
hi guys
i am facing network problem with CM9 rom for galaxy s.mobile network cannot recongnised .it show NO NETWORK
any help

Categories

Resources