Anyone that can make stickers please read - Off-topic

Hello, I need some help. Ive been searching all around the web for a site that will let me upload a pic I have and turn it into a sticker. Either they are too small or need to buy in bulk. Im looking for just one single sticker, about 8inches in height and 12inches in width. Maybe a little smaller then that. Is there anyone here who makes stickers and can do this for me?

Do 'em yourself. http://www.staples.com/Staples-Sticker-Paper/product_490429

Thanks ill look into that. But i need it a gloss finish
Sent from my double barrel Shooter. BANG!

http://www.amazon.com/Glossy-Inkjet-Photo-Sticker-Paper/dp/B000VKV2H4

I think you can search the store about stickers and ask if there are stickers of the size you need, so you will get a better answer.

Maybe do a Canva order?

Related

New case!

OK then,
I was going to get a new housing for my sad looking Ameo. They come in the standard Ameo silver or a rather smart HTC black. I already have a silver case, but here is the question.
Do the black housings, wear, scratch, or paint rub away easy? I don't want to get one and find it looks crap after six months. They ain't cheap! before anyone else says it, I know it depends how you treat it. I'm on about normal wear and tear use. How does yours look now? are there any signs of the metal underneath showing?
Regards
Jay
Black Case On The "advantage"...
Hey Jay,
I have a HTC Advantage x7501, with the black case of course, and have been using it with "typical" every-day use now for about 6 months. I have never even seen one of the silver cased "Ameo" versions of the device in person, so my review is a bit "one-sided," if you will... Also, I have a friend with whom I work with that also owns the same model as I. With saying all that, and without having experienced the silver model, I would bet the silver model would hold up a bit better on the finish due to the fact that if the silver gets scratched, the metal beneath it looks much closer to the silver finish than the black. I have a couple small blemishes on mine, and I am very particular with my mobile devices, but after using day-by-day at work and home, it has managed to get marked up just a bit. The biggest problem is, if you get a scratch on it, the metal below sticks out "like a sore thumb!"
I definitely believe that the black finish is a bit more professional looking, where sometimes the silver finishes can make a device look cheap or make it stand out.
Anyways, to give you my honest account on TWO Advantage x7501 devices (black finish) after 6 or so months of daily use, it is overall good, and neither one shows any major signs of wearing finish. Also, we both use a case that the device "slides" tightly in and out of each time you use it (without the keyboard attatched), and the device really hasn't shown any real signs of wear on the sides where it rubs the case. However, if you do happen to mark it up in any way, you will definitely notice it. Again, I am very picky, so keep that in mind, but so you have a better idea of what I am saying, I attatched a couple of pics so you can see what it looks like when or if you do scratch or mark it.
HOPE THIS HELPS!!!
-Ryan
Also Note: Only one of the devices I wrote about is pictured, but are very similar in condition, and were both purchased slightly used.
X7501 Cosmetics...
I have had my X7501 for almost 10 months now and it only has one very tiny mark on the top right corner (you have to look hard to even see it).
Since I'm also very particular about my devices (I always keep them looking new) I just used a Sharpie (permanent marking pen) to "erase" the offending mark. This works great and I would recommend it to anyone wanting to touch-up black anodized aluminum like the Athena housing.
Wow! thanks for the reply Guys, Ryan that was one hell of a reply. Must have took you a while to do that and I appreciate it. toyfreak, the idea with the marker pen is a great one. I think on just that idea alone I will get black. Its harder to touch up silver! It looks better too.
Regards
Jay
Indeed is surprisingly hard coating, I carry mine in my pockets and can't say I'm careful with it, rather the opposite, I have it since it came out and there is only a little wear in one of the corners, hardly noticeable, where the scratches are more visible, is on the silver border next to the screen, not that it look bad or anything.
Black housing - Where?
I would like to know where you can buy a black housing for your Ameo, mine needs a new one as well!
And what about your keyboard, can you get a black one too?
/HM
Silver / AMEO
Hi guys,
Proud owner of a wonderful brick since 6 months in grey color I should say that if I new I would have choosen a different color.
The grey AMEO housing is far from being "time resistant"...
Since few weeks the "video camera" around the front cam as disappeared and the "Alert" will soon do the same.
I allways take good care of my stuf and I'am bit disapointed for a 1.000 bucks machine to see it !
hmeyer said:
I would like to know where you can buy a black housing for your Ameo, mine needs a new one as well!
And what about your keyboard, can you get a black one too?
/HM
Click to expand...
Click to collapse
They are available on ebay, if you search athena case you should find them. any problems then let me know. There is a guy who does spares on there and he has them in black or Silver.
regards
Jay
Hi,
Just a quick update on the new housing. It's arrived, and I put it on. It looks great, so glad I got black. Thanks to those who took the trouble to answer this post so well.
If anyone needs a new housing for their device then let me know and I will let you know where to get them from. He claims to have a few left!
regards
Jay
responderman said:
Hi,
Just a quick update on the new housing. It's arrived, and I put it on. It looks great, so glad I got black. Thanks to those who took the trouble to answer this post so well.
If anyone needs a new housing for their device then let me know and I will let you know where to get them from. He claims to have a few left!
regards
Jay
Click to expand...
Click to collapse
I'm looking for a new housing, for the X7501 not the 7500. Please advise me where to find one.
tootallk2000 said:
I'm looking for a new housing, for the X7501 not the 7500. Please advise me where to find one.
Click to expand...
Click to collapse
Forgive my ignorance, What is the difference?
Jay
responderman said:
Forgive my ignorance, What is the difference?
Jay
Click to expand...
Click to collapse
The X7501 does not have the internal or 2nd camera, the X7500 does. So I would have a big hole in my unit if I used that one. I don't know if the inside layout is any different but that's the only visible thing on the external end.
I need a new housing too.
Anychance you could PM me a link or contact for this.
Thanks in advance.
tootallk2000 said:
The X7501 does not have the internal or 2nd camera, the X7500 does. So I would have a big hole in my unit if I used that one. I don't know if the inside layout is any different but that's the only visible thing on the external end.
Click to expand...
Click to collapse
7501 does have 2 cams. the 7510 doesnt
goodluckje said:
7501 does have 2 cams. the 7510 doesnt
Click to expand...
Click to collapse
LMAO dude have you been drinking? The 7501 has 1 camera and the 7500 and the 7510 has 2. I own the 7501 which is also cheaper than the 7500. I suggest you google them and you'll see the difference.
tootallk is correct. 7501 has 1.
back to the subjct of cases. i got the nutshell case mentioned elsewhere in this forum. definitely woth the money... and the wait. beautiful case and funtional.
wgary said:
back to the subjct of cases. i got the nutshell case mentioned elsewhere in this forum. definitely woth the money... and the wait. beautiful case and funtional.
Click to expand...
Click to collapse
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
madbird said:
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
Click to expand...
Click to collapse
oops my bad.
madbird said:
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
Click to expand...
Click to collapse
Here you go,
http://search.stores.ebay.co.uk/sk-...shopQQfsooZ1QQfsopZ1QQsaselZ239115870QQsofpZ0
Not cheap though!
Jay
P.S if im in trouble "Madbird" made me do it

Full Housing Cover

Ask this question because I want to give my sister,so interested in the red or white.Where is it available?
p.s. no search results on ebay
Bro, have you watched videos how to "change" a housing on such a phone ?!?? It's pretty tricky and requires LOTS of tools and to be really handy..... NOT easy AT ALL to change the housing... Much easier will be to get her a rubber/silicone case or something like that..... Changing the housing is pretty much mission impossible
Take a look at this - http://www.youtube.com/watch?v=cTOyjGol_iM - then decide if you're still up for changing the full housing
Bro,thanks for link,but I myself was not going to do it and trust the professionals,I need only buy.
You can buy it on ebay. They are mostly shipped from China/Hong Kong.
PS. Both the Incredible 2 and Incredible S housing work with each other. They share the same housing.
Red housing:
http://www.ebay.com/itm/OEM-HTC-Inc...Accessories&hash=item1c23f97efd#ht_1824wt_840
others:
http://www.ebay.com/sch/i.html?_nkw...ase&_osacat=43304&_trksid=p3286.c0.m270.l1313
http://www.ebay.com/sch/i.html?_trkparms=65%253A12%257C66%253A2%257C39%253A1%257C72%253A6063&rt=nc&_nkw=htc+incredible+s+replacement+housing&_dmpt=PDA_Accessories&_sticky=1&_trksid=p3286.c0.m14&_sop=15&_sc=1
if you want an official store you can try google, there are some places that sell it like repairsuniverse.com
kaijura, thanks, likely that something bad had happened with my ebay`s search

Oh please find me the part number for this thing

This is kind of very off topic, hope to find the answer here before having to create an account on a electronics forum...
I just started messing around with arduinos, circuits and such, and I NEED to buy more of those things like the one in the pic
https://drive.google.com/file/d/0BxY7-Pw7Nh5mc2pUbzlNQUFxYnc/edit?usp=sharing
https://drive.google.com/file/d/0BxY7-Pw7Nh5mZ1plVU5qd29sam8/edit?usp=sharing
https://drive.google.com/file/d/0BxY7-Pw7Nh5mZWJvLWVZNS11Qkk/edit?usp=sharing
this one I extracted from a shock prank pen now I wanna know the part number/name so that I can learn about this thing and buy more of them, Im pretty sure that it is a step up transformer of some kind, it takes 3 lr41 batteries
Here I strapped the blue cover off looking for any numbers but could not find any... the only print on this thing is on the white circle soldered on the top and it has to marks 'lxm' and '6B'
https://drive.google.com/file/d/0BxY7-Pw7Nh5mQUE4N1VmcUEwb1E/edit?usp=sharing
Thanks in advance

S6 Edge Skins by Skinit

Hi everyone came across this site, was wondering has anyone tried skins from here:
http://www.skinit.com/device-skins/phone-skins/samsung/galaxy-s6-edge?p=7
Let me know what you guys think :good:
https://drive.google.com/folderview...VlX243bGM2bUVTRkdWcjQwdDJTRFF2Wk0&usp=sharing
Are these back plates your designs ? and how do I get one
I have one on my phone right now! I love them and so does my wife. They are a little pricey compared to Deacalgirl and others but they are top notch quality and fit perfect. I have a couple that I swap out every so often. If you peel them off and stick then on the paper it came in you can reapply then later.
Da Edge
So they are reusable? I was reading on their FAQ that they don't stick the same after removal. How are you able to reuse them? I was looking to buy a couple and swap them out.
oushadow said:
So they are reusable? I was reading on their FAQ that they don't stick the same after removal. How are you able to reuse them? I was looking to buy a couple and swap them out.
Click to expand...
Click to collapse
Yes, as long as when you take them off you are careful. I make sure to put it on the sticker backing that I pull the new one off of. They kind of "heal" themselves a little so if you get a finger nail mark or something like that it will usually come out. I recommend them, they are nice!
Da Edge
Why this thread is here in the first place?
neonsector said:
https://drive.google.com/folderview...VlX243bGM2bUVTRkdWcjQwdDJTRFF2Wk0&usp=sharing
Click to expand...
Click to collapse
Do you have a plain template for these?

[Q] Google live cases, anyone have one?

Tried searching and didn't see a thread. Does anyone have a Google live case, or has anyone ordered one? Basically a customized case for $35. You can also install the live case app and it will do some kind of android home screen wallpaper wrapping trick that matches the case.
Photos live case - upload a photo to make a case
Places live case - use stylized google map to make a map case
Reading reddit it seems like some people are getting nixed when they upload a photo due to copyright claims. I'm looking at the map cases, they look pretty sweet, not sure I want to drop $35 on a case I might not like, though.
EDIT - I also wish there was an option to have "Nexus" printed somewhere on the back of the case, like maybe in subtle white/black font along the bottom.
SeriesOfTubes said:
Tried searching and didn't see a thread. Does anyone have a Google live case, or has anyone ordered one? Basically a customized case for $35. You can also install the live case app and it will do some kind of android home screen wallpaper wrapping trick that matches the case.
Photos live case - upload a photo to make a case
Places live case - use stylized google map to make a map case
Reading reddit it seems like some people are getting nixed when they upload a photo due to copyright claims. I'm looking at the map cases, they look pretty sweet, not sure I want to drop $35 on a case I might not like, though.
EDIT - I also wish there was an option to have "Nexus" printed somewhere on the back of the case, like maybe in subtle white/black font along the bottom.
Click to expand...
Click to collapse
I have one. Just came in the mail 2 days ago. It actually fits pretty well, I prefer it to the Ringke Slim I was using. The print looks great. Not sure how well it will stand up to wear, only time will tell. The NFC button is pretty hard to activate, so i just gave up on that. If you have the extra cash and want a unique case I'd say its worth it.
$35 for a case its a little bit expensive, they should down the price, specially to the adopted cases.
SeriesOfTubes said:
EDIT - I also wish there was an option to have "Nexus" printed somewhere on the back of the case, like maybe in subtle white/black font along the bottom.
Click to expand...
Click to collapse
If you are using the photo case - just add the "Nexus" (or whatever) text to your image before uploading

Categories

Resources