please from yestrday im trying to install froyo 2.2 i try a lot but i can t get it until noy some time i can t continue the instalation some time my G1 get blocked
the 1 question if i want to install it i will need to re-install all ( the spl flashing ...)
or just install the new ROM
2: if someone can recomand me a link to download the froyo 2.2 because o need to install the skype and they told me that the froyo is the only one that support skype
Which ROM did you try to flash and how are you flashing it?.....you dont need to flash spl or radio again if you have got SPL 1.33.0013d and Radio 2.22.28.25 or 2.22.27.08. Just flash a simple rom ( not a sense rom) using recovery.
Tell me your SPL, Radio and Recovery you have currently on your phone. You should also write this information in your SIGNATURE so that everyone can see it. You can edit your signature by clicking USER CP (see the top bar on this page below XDA developers logo) ----> Edit Your Signature (see on left hand side of the page, second box).
Write about Your SPL, RADIO, ROM, KERNEL, RECOVERY and any other information about your mobile. ( See my signature below this post or of many other people who are better than me)
NOTE: There are many VIDEOS on YOUTUBE which show full method of Flashing a ROM and many other things about G1. You can also tak help from them. If you still face problems feel free to send me Private Message (PM)anytime or simply post here. I will surely help you through this as much possible, dont worry.
Related
Hi all,
Excuse me if apparentely it's can seems I repeat old and answred question, but sincerely I have not yet sufficentely clear ideas on how I can flash my blackstone with an updated Rom.
I want remark that I have a decent knowledge on developing a program for W.M., but I confess that after read various threads and articles about, I remained in a great confusion yet!
The question:
I have a branded (Tim) Blackstone:
BLAC100 32M
SPL-1.13.0000
MicroP-BlackStone (Led) v6
Device Info:
ROM Version 1.13.401.0 (20428)ITA
ROM Date 10/25/08
Radio Version 1.09.25.14
Protocol Version: 52.49a.25.26W
This device ABSOLUTELY need to be upgraded to the Rom 1.56 (but first of all I WANT TO UNBRAND it).
After an initial problem (caused by the unricognized S/N), I dowloaded (using another S/N) from Htc the File:
RUU_BlackStone_HTC_ITA_1.56.408.0_Radio_52.62.25.34_1.13.25.24_Ship.exe
To upgrade my device, I want to preserve only the country and the language, because I read that it is necessary to preserve the A-Gps funtionalities (data changes country by coutry). Is it thrue?
I understood that I can't use it, cause the Tim brand of my device.
In my case only the brand is not matching, while the language and country are apparentely matching.
(But, why the "401" of my device is not matching with the "408" of file I downloaded? Can I use the file with this unmatching country code?)
1) - I have a great confusion on SPL, HSPL, SSPL, USPL.
2) - I have a great confusion because I not understood if Radio Rom upgrade and Rom upgrade are 2 different processes or not.
3) - Is the Rom version related (developed) for a specific Hardware version (as it is logical to think)?
4) - Is the Radio rom "country sensitive"? (As I think that each country have a different GSM Net).
5) - If want upgrade both radio and rom, what instrument exactely I need?
Please can you clear my ideas.... and doubts?
Thanks
Ignazio
Ok, you have managed to get an official HTC rom, you can also find some more here
If you use HSPL or USPL, this will allow you to flash the new rom. If you are intending on staying on the official rom, uspl will probably be the best option for you to use.
In response to your questions:
1) SPL - Second Program Loader is a boot loader after IPL (Initial Program Loader) often seen on smart phones and PDA's. SPL is similar to a BIOS in a computer and can be flashed and updated.
The difference between USPL and HSPL:
* HSPL is an user-modified SPL that you have to flash to your phone. It overwrites the existing SPL on your device with a "hacked" one so to say. It allows you to bypass the HTC certificate check and flash unsigned or CID-mismatching roms to your phone. You only have to flash it once and then you can flash roms anytime.
* USPL is a temporary solution. It takes advantage of an exploit in the existing SPL and then loads a modified one to memory, effectively allowing the same thing as HSPL. However, since this is only memory-resident you have to do it each time you want to flash unsigned or CID-mismatching roms to your phone, because this exploited state is lost upon reboot. With USPL you must still have the right version of the HTC SPL that is compatible with the rom you want to use.
* SSPL is just another method of getting to change the spl and is only really needed if you experience problems using one of the other methods.
Hopefully this makes it a little clearer for you.
2) It depends. The radio is in most cases included in the rom. The rom you are looking to use included a radio. This is shown by the 1.13.25.24 in the name of your rom, so if you install that rom it will also update the radio in a single process. You can however also only upgrade the radio and then it is done as a separate process and will not affect the rom.
3) All the roms are initially developed for a particular hardware configuration I would imagine, but there are many fantastic chefs here on xda who take roms meant for other devices and are able to port some of the components to a cooked rom which can then be used on a number of different devices.
4) Yes, radios are country and area sensitive, so what works well for one person in a particular area would possibly not work as well for you.
5) You will need to use either hspl or uspl in order to upgrade your radio (if you are using one intended for an HTC). Some people have taken radios from other devices such as the Omnia, but in order to flash these radios you need to do a security unlock of your device and there are special tools that allow you to do this, but this is really only a last resort if you can't find an HTC radio that works for you.
The steps to follow in order to flash are described in the Dummies Guide to Flashing (see link in my signature) and if you have any further questions, please ask them in that thread.
Thanks for reply,
You cleared at least 70% of my doubts.
hurricane3000 said:
Thanks for reply,
You cleared at least 70% of my doubts.
Click to expand...
Click to collapse
Pleasure, so what are the remaining 30%?
Rom Problems..
hi..
i got my blackstone from service today because they changed my mother board.now i want to change my room to be more faster and have that winmo 6.5..i have read a lot but there are to many informations to understand..can someone tell me pls how i can change my rom,from first thing to the last and for that what rom to download?
step by step links or something would be great..i tryed myself but there is to many information for me to now what to choose..
thanks and i am looking forward for an answer
thekingro said:
hi..
i got my blackstone from service today because they changed my mother board.now i want to change my room to be more faster and have that winmo 6.5..i have read a lot but there are to many informations to understand..can someone tell me pls how i can change my rom,from first thing to the last and for that what rom to download?
step by step links or something would be great..i tryed myself but there is to many information for me to now what to choose..
thanks and i am looking forward for an answer
Click to expand...
Click to collapse
Read the Dummies Guide (link in my signature). If you have any more queries please post them in that thread as this one is likely to be closed down soon.
ROMS are a personal thing, so have a look at a few and read some of the more popular threads (ie the ones that keep popping to the top) and depending on the feedback received from users make a choice. Once you've flashed once it becomes addictive and you'll try a few before you find one that suits you.
another thing
after i follow all the steps from there all roms should work..after that finnishing them i start that rom update launcher that comes with every rom?
Continuing on Dummies Guide thread.......
As above, continue on dummies guide
Thread closed
Hi,
I Had Really Alot of problems with my network and the phone droped almost all my calls
so i decided that i will go back to my stock SPL and go for warrenty
coz i searched the fourm and i didn't find a soultion for this problem
I just need to know the steps that i have 2 do + i don't remember the stock rom that was in my HD ~
Thanks !
goto http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
there are all the stock roms available, find the one that suits your needs
goto http://forum.xda-developers.com/showthread.php?t=431217
this is hard spl topic, read the instructions (7 simple steps) to downgrade your spl to default.
IF YOU USED USPL YOU DO NOT HAVE TO REVERT ANY SPL
Yeah I Used USPL ,
So I Only Have To Istall An Official Rom and the spl will go back as it was ?!
The Probllem Is That I Don't Know What Is My First Official Rom :s ?!
Is There Anything I Can Find from using the s/n or something !
basically spl will not return to normal as it actually did it the first time you reset your phone, anyway yep you just need to install stock rom. not to be rude mate but did you actually check the links I provided? in the first one there is a list of all stock roms, which of course depend from vendor, country, language etc. If your rom was for example in arabic + english there is only one you can download, therefore that must be the one. if not, you will have to read, read, read and then read the related threads for those roms until you find your one.
you could also goto htc site and try to download, if present, a rom update for your device. you will have to enter the IMEI of your phone and if your code is accepted, you will be 100% sure that you are allowed to flash that rom in your phone. and your warranty will be ok
I wish people didn't user Rapidshare who offer neither:
There are no more download slots available for free users right now. If you don't want to become a premium member, you might want to try again later.
That's about the sum of it. Sadly I too have a dead screen I need to restore to factory.
Hello everyone and sorry for starting a new thread with so many threads already about installing custom ROMs. So sorry again....
First of all I want to say that I have installed Saturday my first custom ROM.
1. I installed HardSPL
2. I installed ROM (I got an error first time because my usb got diconnected - tricolour boot screen and an error code - could not see it; second time everything worked fine and I have now a new great looking ROM
3. I did not installed Radio.
1st question: Do I have to install Radio everytime I install a new ROM or is it ok if I keep my old Radio? - the phone works just fine.
Second question: Do I have to HardSPL everytime I install a new ROM?
Please be kind and reply to my questions even if it must have been already posted in some thread.
rarely can i answer a question but yours are easy LOL
You don't need to do your radio because the radio you have is untouched by roms.
Likewise if you do a radio it wont change your rom.
Radio's probably will not make much diffrence.
Once you have Hard spl it is done.
You can then flash as many roms as you want , but Hard Spl is just once
No and No.
Thank you guys.
The radio is stored on a different part of the memory then the ROM, so it doesn't get replaced when you flash a ROM (unless the ROM specifically includes it, like the new "official leaked" ATT ROM). And custom ROMs will never include the radio, that I know of.
A newer radio version MAY get you better battery life or GPS reception. But it can be very specific to your geographic location. It your choice whether to update your radio or not, its certainly not required. If you want, you are free to experiment, as you can always go back to the old radio if the new one doesn't work out. The process for flashing a new radio is essentially the same as flashing a ROM, except the actual process if done very fast.
As already mentioned, you only need to HardSPL once. The only way phone will become SPL locked back to factory condition is if you specifically do so using the provided relocker program on the SPL thread (for instance, to return the phone for warranty repair).
hey guys please help me i'm update my x1 using sony ericsson update service...
wenever i try updating it says "Phones software modified cannot update" and i've never modified anything... & never updated before...
plz help...
my x1 specs...
os version 5.2.21891(21891.5.0.88)
manila version 2.5.20113030.0
rom version 07.feb.2011
rom date 11/20/09
radio version 1.14.25.55
protocol version 52.65.25.34u
im using default or stock rom (ENERGY ROM)...
and rom version shows date not version...
plz help me guys...
thanx in advance...
noone answering him? Oo
dude, you're running a custom-rom, that's why seus is blocking you. read up on how to manually flash a rom, because that's what you have to do.
caliban2 said:
noone answering him? Oo
dude, you're running a custom-rom, that's why seus is blocking you. read up on how to manually flash a rom, because that's what you have to do.
Click to expand...
Click to collapse
aah...can u help me out??? to manually flash a rom????.... a link or something??? what i've to do???
guys no 1's helping???
It happened to me once.
Regarding you have "manila version 2.5.20113030.0" and your OS version, you have a custom ROM installed, and this means also you have HSPL installed in your device.
To get your device recognized by SE update service, you have to flash a *stock* ROM, and also a stock SPL.
After doing these two steps, your device will be recognized.
You must be familiar with flashing ROMs, and you should search the whole forum for stock ROMs and SPL, before attempting to flash anything..(I'm not responsible for any damage)
As a suggestion, refer to this thread for a detailed info on the subject
and also this thread for Stock SPL (see "extra how to: how to restore Stock SPL for warranty reasons." section)
ElectroDoc said:
It happened to me once.
Regarding you have "manila version 2.5.20113030.0" and your OS version, you have a custom ROM installed, and this means also you have HSPL installed in your device.
To get your device recognized by SE update service, you have to flash a *stock* ROM, and also a stock SPL.
After doing these two steps, your device will be recognized.
You must be familiar with flashing ROMs, and you should search the whole forum for stock ROMs and SPL, before attempting to flash anything..(I'm not responsible for any damage)
As a suggestion, refer to this thread for a detailed info on the subject
and also this thread for Stock SPL (see "extra how to: how to restore Stock SPL for warranty reasons." section)
Click to expand...
Click to collapse
Hello please help my Sony Ericsson X 1 Rom 1.05.931.10 Radio 1.06.25.29 Manila 2.5.20212114.0 Wi-Fi connection is working, but I can not open a webpage or use any program that uses the Net also how enter the Settings text messages do not know where please help please
sorry for late reply... but can u thread me to stock rom and stock spl plzzz....
Unfortunately, the Xperia X1 is now an old device, and the links to its stock items are rare and not working any more.
I managed to find links for the stock ROM (Generic UK WWE, latest version provided by SE which is R3A)
Here it is:
Part 1
Part 2
After you download the two parts, rename the file extension from .image to .nbh, and if you are using the SD card method, rename the file to kovsimg.nbh
Be sure to read about flashing ROMs and changing the SPL, if you did it the wrong way you may damage your device.
thanx i'll try and tell u soon...
hello,
I hope someone could help me as i have no idea how to my G1 back to stock.
i tried to flash my g1 to an froyo build but i couldn't do anything anymore. now i try to get it back to stock rom.
the only thing i still can do on my phone is i can get into recovery mode...
i can't get to the rainbow screen.
i have an dutch G1 but i cant get any other of the specs anymore cause i dont know how to get them on this phone.
i hope someone could help me as i tried to search a lot on Google and XDA but i could not find anything related to this ****ty problem.
thanks in advance for the one who could help me.
greets Ollievssn
Power + Back takes you to recovery, too? Did you check whether your home button is stuck?
Power + Back also works.
but what can i do with this?
EDIT: i pluged in my USB cable and i saw it was Fastboot. But i still dont know what i can do with this
If you have a working fastboot mode, you can do almost everything, i.e.
- flashing a new recovery / rom
- flashing new radio / spl
- ...
A tutorial you can find here
Probably it's enough to flash a new rom to solve your problems. In that case, you should first select the rom you would like to run, then to flash the requirements (i.e. SPL, radio, etc.) and than the ROM.
What SPL / radio do you have installed? Can you post what's written on the fastboot screen?
The thing written (wrong spelling i guess) on my fastboot screen is:
DREA110 PVT 32b
HSPL10.95.3000
CPLD-4
RADIO-2.22.19.26 1 or I (i couldn't tell from the screen)
Oct 20 2008
Ok, you have installed the so called "HardSPL", which is a custom SPL which unfortunately doesn't allow you to flash recovery / radio / SPL using fastboot.
Now you have different possibilities:
1) keep your spl / radio and flash a rom which supports your SPL/radio. The old enomther roms, CM4/5 should work without problems
2) keep your spl / radio in combination with custom partition tables. In that case, you should be able to run CM6 or other Eclair/Froyo based roms, too.
3) Update your SPL and/or radio and you will be able to run all roms available for the G1
In your case, updating the SPL is to be done in recovery mode. This is a bit more risky that doing so in fastboot, because flashing is done while setting the "reboot into recovery" flag. If for some reason the recovery cannot be started correctly you will have a brick.
There are some tutorials here in the G1 area guiding you through these steps, unfortunately I don't have the links available at the moment, but if you search for it, you should find it easily.
Btw. if you really want to return to tock, you can also flash an original image ...
i really want to return to stock rom but i dont know how
There are some OTA images available which you can flash. The easiest way would be the "dreaimg.nbh", but this will give you only Android 1.1.
There are some other images available (at least one which give you Android 1.5), but at the moment I don't have the link. Additionally all the original roms do provide only a limited number of languages, so probably you need to check first, whether your language is supported by those ota-images ...
Probably tomorrow I will have a look whether I can provide you with a / some link(s).
That would be great.
but for now i will keep trying to find something, and thanks to your notes i probably will be able to find something