Hi, just a quick few questions.
I'm currently using the Voodoo kernel with a stock 2.2 Australian ROM. If I upgrade to 2.2.1 using Kies:
will this give me an official 2.2.1 kernel?
will I lose root?
and what evidence is left over that I had Voodoo i.e voided my warranty?
Thanks guys.
Hi recently I installed Darky 10.1 and IMHO my deodexed JVO was much better, and now when I noticed that hardcore have a final kernel for gingerbread I think deodexed JVO + speedmod for gingerbread will be a winner here.
How do I go back from Darkys Rom to stock JVO? Do I need to remove the lagfix? or I cant flash the stock JVO with bootloader and re-partition, then flash deodexed JVO?
Thanks!
Somebody? I'm really worried about if I need to disable lagfix or not (assuming Ill flash stock JVO with bootloader).
Hi all
finally i am on an official 2.3.3 JV6 rom
now i feel its lagging abit
i used voodoo lagfix on my previous rom
now i am searching for any lagfix or kernal (with root)
for my mobile (JV6)
please can anyone help me which one to use
Thanks in advance
Look in Android Development subforum here. You'll find custom kernels to do what you want.
eg. SpeedMOD, FuguMOD, etc.
which one do you prefer for the JV6?
Just want to know you opinion
aman11dhanpat said:
Hi all
finally i am on an official 2.3.3 JV6 rom
now i feel its lagging abit
i used voodoo lagfix on my previous rom
now i am searching for any lagfix or kernal (with root)
for my mobile (JV6)
please can anyone help me which one to use
Thanks in advance
Click to expand...
Click to collapse
Today's GB rom is smooth enough, no lagfix is needed.
If you need ext4, the famous Voodoo or Speedmod also is the solution for you.
19000ZSJV6 root Please??
i am on an official 2.3.3 JV6 rom
how i want to root my i9000..
can anyone pls help me..
I've tried many ways but still cannot rooted
Hi
I'm SGS(I9000) user in Singapore..
I upgraded my SGS to GB late week.(JV9)
But I can't find how to root for it.
And I wonder there is any speedmod or tegrak kernel for JV9..
Thanks be4!
Hi,
I finally got a Samsung Galaxy S after finding a great a deal on it. I'm aware that there are several ways on how to root this device. However, due to that I don't know which to use.
Currently I'm running on 2.2.1 Froyo XXJPY with Kernel Version of [email protected] #1.
I'm not totally clueless about rooting as I've done it already on my HTC Wildfire.
Could someone please advise me which is the most up-to-date and safest method of rooting? Link would be greatly appreciated.
Also, I'm a bit confused about installing ROMs. I used to use CWM on my HTC Wildfire which was incredebly easy to do. Would it be the same on my Galaxy S?
I'm planning to test out MIUI, DarkysROM and such ROMs. Would these ROMs have the LAGFIX feature integrated in them as well?
I apologise if a thread like this has already been posted a thousand times but I just can't come up with a definite answer.
Thanks in advance.
I have a galaxy s Vibrant the I9000M and I rooted and unlocked mine today using SuperOneCick and then The Galaxy s unlock by helroz on the app market took a grand total of 6 minutes
Thank you! Now, that's one down.
Now just want to know about flashing ROMs e.g. MIUI, DarkyROM and such.
Do I need to root my SGS first to be able to flash custom ROMs?
I also noticed that you would also have to flash firwares and kernels. Do I need to this before flashing custom ROMs?
Thanks in advance.
In order to flash a custom rom you need to have clockworkmod (CWM) recovery.
and from that its easy
As for the newer rom's here, they are all 2.3.x, so in order to get from 2.2.1 JPY, you will need to flash a stock rom 2.3.x with bootloaders via Odin.
use this link to read about odin and flashing with it. its a great guide
http://forum.xda-developers.com/showthread.php?t=723596
to find stock rom's - they are in the general section. and custom rom's in the dev section.
read a little and after that have fun!!
And keep in mind every rom has its little guide, read those before you flash any.
Hi,
Many thanks for replying. Can I follow the video below made by a fellow XDA member direct from 2.2.1 to 2.3.4 via Odin?
http://www.youtube.com/watch?v=6lO3Y86N2p0&feature=BFa&list=FLqhM0qK4aVsLmWAA_YYhBCA&lf=mh_lolz
So I will Download stock JVQ from Samfirmware > Download Odin > Flash a stock 2.3.4 JVQ > Install chosen Kernel with CWM > Flash chosen ROM using CWM.
When would I need root then?
Is that right?
This reminds me when I had my Samsung Tocco. Pretty much same procedures.
Code Geass said:
Hi,
Many thanks for replying. Can I follow the video below made by a fellow XDA member direct from 2.2.1 to 2.3.4 via Odin?
http://www.youtube.com/watch?v=6lO3Y86N2p0&feature=BFa&list=FLqhM0qK4aVsLmWAA_YYhBCA&lf=mh_lolz
So I will Download stock JVQ from Samfirmware > Download Odin > Flash a stock 2.3.4 JVQ > Install chosen Kernel with CWM > Flash chosen ROM using CWM.
When would I need root then?
Is that right?
This reminds me when I had my Samsung Tocco. Pretty much same procedures.
Click to expand...
Click to collapse
That is right... basically when you flash a kernel with CWM you get root access. it's one of the features of a custom kernel. some of them activate it on there own and in some you need to activate it your self from the recovery (very simple).
And all the custom rom's come with root access, so in following the steps you wrote, you will get the root access with the custom kernel, and again in the custom rom.
Thanks for everyone's help. I'm now running Armetris 3.6.1 with Semaphore Kernel.
Just a question though, with my phone rooted, lagfix enabled, flashed with custom ROM and such, can I just simply go back to stock ROM? e.g. JVQ/JVR using Odin without any problems?
It is suggested to disable lagfix before changing rom's and kernel's
I know some how would say it is not a must when you use odin, but i always disable it before doing changes. I like to keep it safe.
sorry for this nooob question....
new to the samsung gt i9000, do i need to create a gold card before i do anything else????
sorry to be a bit thick but im used to htc
Hi,
Thanks for the reply. I'm currently running on Semaphore Kernel but I can't find any Lag Fix option on my phone? There isn't any on CWM Recovery as well.
I thought when you use EXT4 and convert it, Lag Fix would show up but I found nothing, so I just converted back to RFS.
So, I'm fine to directly go back to 2.3.4 JVQ even even I have a custom Kernel and custom ROM?
Thanks in advance!
Code Geass said:
Hi,
Thanks for the reply. I'm currently running on Semaphore Kernel but I can't find any Lag Fix option on my phone? There isn't any on CWM Recovery as well.
I thought when you use EXT4 and convert it, Lag Fix would show up but I found nothing, so I just converted back to RFS.
So, I'm fine to directly go back to 2.3.4 JVQ even even I have a custom Kernel and custom ROM?
Thanks in advance!
Click to expand...
Click to collapse
If you used the EXT4 app and converted to RFS then you have disabled the lagfix.
The lagfix changes the filesystem from RFS to EXT4. so when you converted to RFS yoh disabled it.
So,yes you are good to go.
---------- Post added at 02:57 PM ---------- Previous post was at 02:55 PM ----------
pat da punk said:
sorry for this nooob question....
new to the samsung gt i9000, do i need to create a gold card before i do anything else????
sorry to be a bit thick but im used to htc
Click to expand...
Click to collapse
Gold card?? what??
Also, If I were to flash a JVS Based ROM do I need to be on stock JVS and a JVS Kernel to flash it?
Once on I'm on JVS custom ROM can I just go back again to JVQ stock (Older firmware) without problems?
Really appreciate all your help Bork84!
Basically using odin you can change to JVS and JVQ no problem.
As far as custom rom, from what I know it does not matter on which 2.3.x you are, thay all have the same bootloders. so technically you dont need to be on stock JVS to flash a JVS custom rom.
but I am not an expert on that.
from my experience, i flashed to a JVR (2.3.4) custom rom via CWM from a 2.3.3 stock rom, and didn't had any problems.
So i cant give you a 100% answer