I'm currently still running on the WWE original rom, as yet haven't seen any need to upgrade. I'd like the GPS functionality, but don't NEED it just yet...so I can wait.
However have just moved house and my network signal is now marginal at best, has anyone seen any improvements in GSM radio signal with any of the newer roms ?
cheers
anyone have any views?
When HTC first sold the P3600 they said they disabled the GPS chip set because it interfered with the GSM radio. From what I’ve been reading in some of the posts, some people are still experiencing a desensitized radio section after upgrading to the new GPS enabled ROM. Maybe this is why it is taking HTC so long to release the official ROM.
I’d like to hear from posters who have upgraded to the new ROM to see who has or has not seen their signal strength decline after the GPS ROM upgrade.
Mine is fine, still 3-4 bars. I use GSM850 out here in the wilds of Canada, though.
I had the same problems with signal after upgrading to dopod rom. However, I also updated radio to 1.38 and now GSM signal seems to be much better. Not excellent but reasonably good.
I've compared mine Running the Dopod Rom with radio 1.38 with a friends running the original non gps HTC rom and got the same signal,we were both using the Greek Cosmote network "Gsm 1800"and we had both selected the gsm band and disabled 3G .
Could all UK T-mobile users provde feedback on how they are finding the reception on the T-mobile network? As an ex-Kaiser user, I'm finding reception is quite poor, the Diamond usually showing a couple of bars less than the Kaiser. Additionally, HSDPA performance is poor and intermittent.
Mine shipped with 25.03 and I am not impressed with the signal or data at all. I am finding it is dropping calls where my Vario II was fine.
The battery usage is quite high too so I am recharging at the moment and I think I will take the radio to 25.05 tonight....Not sure whether I should try another OS ROM.. seems too many to choose at the moment
Cheers
Aidan
I have tried all of them and now on 25.11 which seems to hold a 3g signal longer but not very strong (2bars ish) better than 25.06 but not a huge difference. I am prob thinking of moving back to 25.06 because it got more better signal for gps purposes, as i said not a huge difference in phone signal.
In all honesty Im what dissappointed i couldnt get a strong 3g signal on motorway. Oh well just wait for the next new radio to test
Anyone experience no phone signal after flashing a ROM to your Pure? I got the device two days ago and immediately went to flash it using one of Duttys roms and also from Tess (IV). With both attempts I get no signal bars whatsoever. That being said I get an "H" where the "3G" used to be. I know that some of you have talked about the HSDPA but even though I have been doing this awhile I am stumped as to why I would get no signal bars. As long as HSDPA doesnt result in more charges from my provider I could care less about that. Hope that makes sense and I hope that someone has some information for me!
Thanks!
jbonham said:
Anyone experience no phone signal after flashing a ROM to your Pure? I got the device two days ago and immediately went to flash it using one of Duttys roms and also from Tess (IV). With both attempts I get no signal bars whatsoever. That being said I get an "H" where the "3G" used to be. I know that some of you have talked about the HSDPA but even though I have been doing this awhile I am stumped as to why I would get no signal bars. As long as HSDPA doesnt result in more charges from my provider I could care less about that. Hope that makes sense and I hope that someone has some information for me!
Thanks!
Click to expand...
Click to collapse
Hi, yes, I have seen the situation on some ROMs where I get 'no bars', but the phone seems to be operational anyway. My suspicion is that it's a problem with the root software from Microsoft, not the ROM chef, since it goes across ROMs.
3G vs. H has no bearing on the problem. The H just shows that the phone is connecting via the higher-speed data linkup. Some providers charge more for H, others don't. You'd have to check with yours.
Thanks for the quick reply. Is there a way to figure out if AT&T charges extra for the "H" connection speeds?
Also, are there any roms out there that have figured out a way to slightly increase the size of the virtual keyboard for easier typing? Both roms I have used so far have kept the keyboard the same and not sure if there is actually a way to increase the size. Lastly, I am reading up on roms trying to find one that I would like but one piece of information eludes me. Does the rom I am researching support landscape mode in Start and all other aspects? Right now I get landscape in web browsing, email and that is about it. I may be missing something here but thought I would ask for clarification.
A note about the Tess IV rom is that I really loved it. It was super smooth and very fast unlike the shipped rom from AT&T.
I found the original rom to be bulky and slow in responsiveness when moving between features or applications. I am sure that is why others moved away from it as well.
AT&T does not charge extra if you enable HSDPA. This is my second AT$T WM device and I have enabled "H" on both.
jdwilson said:
AT&T does not charge extra if you enable HSDPA. This is my second AT$T WM device and I have enabled "H" on both.
Click to expand...
Click to collapse
How do you enable "H" or force it on?
The type of signal is dependant on whats available in the area you are in. As far as I know you don't force "H" to come on, your phone just accesses the best available signal you allow. If " is it then.....
My att plan is the basic plan with the $30.00 data (unlimited) that is required when you buy it. No charges for "H" access for me.. good god, with the way I use slacker all the time, that would bankrupt me in a week.. lol
jbonham said:
Anyone experience no phone signal after flashing a ROM to your Pure? I got the device two days ago and immediately went to flash it using one of Duttys roms and also from Tess (IV). With both attempts I get no signal bars whatsoever. That being said I get an "H" where the "3G" used to be. I know that some of you have talked about the HSDPA but even though I have been doing this awhile I am stumped as to why I would get no signal bars. As long as HSDPA doesnt result in more charges from my provider I could care less about that. Hope that makes sense and I hope that someone has some information for me!
Thanks!
Click to expand...
Click to collapse
I'm using the ENERGY Leo ROM, and notice the same.
Thing is that while H is showing I get no bars and no phone connection. Then the phone automatically switches over to 3G and dials out. This can take up to 10 secs - so, can be annoying!
Could this be a locational thing, as I notice this happening in one location only - perhaps where the signal is not strong enough to utilise the H connection.
Or, is it that H is used for data and 3G only for telephone calls?
H is actually HSDPA and is the 3G data connection. 2G equivalent would be EDGE for example. You will only pick it up if A) Your device supports it, B) Your carrier provides it!!, and C) Your are in a stong enough signal area.
You mention that you flashed to a custom ROM but have you flashed your device to an updated Radio ROM? This is the part of the phone that deals with communications including Voice, Data, WiFi etc. Using a good one makes a world of difference.
Check this thread out for all Versions.. http://forum.xda-developers.com/showthread.php?t=547276
Flashing a Radio is the same procedure that you would use for a custom ROM. Of course, many of you may already know all of the above but some people may not!
DirkGently1 said:
H is actually HSDPA and is the 3G data connection. 2G equivalent would be EDGE for example. You will only pick it up if A) Your device supports it, B) Your carrier provides it!!, and C) Your are in a stong enough signal area.
You mention that you flashed to a custom ROM but have you flashed your device to an updated Radio ROM? This is the part of the phone that deals with communications including Voice, Data, WiFi etc. Using a good one makes a world of difference.
Check this thread out for all Versions.. http://forum.xda-developers.com/showthread.php?t=547276
Flashing a Radio is the same procedure that you would use for a custom ROM. Of course, many of you may already know all of the above but some people may not!
Click to expand...
Click to collapse
No, I thought the updated custom ROM would also update the radio.
What is your reccomendation for the radio?
How do I find out radio version I've got?
I dont have any specific useage beyond taking calls, and updating Twitter, weather etc.
What version do you think is best?
alexdpaul said:
No, I thought the updated custom ROM would also update the radio.
What is your reccomendation for the radio?
How do I find out radio version I've got?
I dont have any specific useage beyond taking calls, and updating Twitter, weather etc.
What version do you think is best?
Click to expand...
Click to collapse
Some ROMs do include the radio, such as Dutty's HG 9 & 10 ROMs.
The radio version is usually included in the name of the ROM.
For best radio, it depends on your carrier and location.
To find your current version, soft reset, it is listed at the bottom next to "R" upon booting.
DirkGently1 said:
H is actually HSDPA and is the 3G data connection. 2G equivalent would be EDGE for example. You will only pick it up if A) Your device supports it, B) Your carrier provides it!!, and C) Your are in a stong enough signal area.
You mention that you flashed to a custom ROM but have you flashed your device to an updated Radio ROM? This is the part of the phone that deals with communications including Voice, Data, WiFi etc. Using a good one makes a world of difference.
Check this thread out for all Versions.. http://forum.xda-developers.com/showthread.php?t=547276
Flashing a Radio is the same procedure that you would use for a custom ROM. Of course, many of you may already know all of the above but some people may not!
Click to expand...
Click to collapse
I checked my radio ROM - it was .17.
Just updated the radio to .91 - immediate improvment in access to 3G cellphone signal.
Of course, I need to use it for a couple of days to get an accurate feel for improvement.
BTW. I'm based in the UK.
I've had varying success using different versions but .57 has always been head & shoulders above the rest for me.
As always your mileage may vary
Recently my signal is constantly switching from G, 3G and H (sometimes full bars with no signal icon). I'm at work so not in a new poor reception area. It'll switch even if I move the phone a couple of inches in one direction. Generally getting poor reception tho.
What I'm wondering if whether to speak directly with TMob or whether it's a) atmospheric issues or b) something to do with my Darky ROM flashed modem (BUJP5)
I have a sneaky suspicion TMob won't help if they discover the phones seriously modded.
It's causing me a lot of grief
Thanks in advance for any advice
Well, I guess I'll sort it out myself.
It appears that it might have been a couple of things; Juice Defender seemed to screw up reconnecting to 3G leaving me with full bars but no signal plus the Preferred Network Type was set to Unknown. I've now changed this to GSM/CDMA auto (PRL) and my signal seems to have stabilised (still a lousy strength tho)
Clue to problem board is littered with problems from one rom and thats it
.
Its the rom remove that before trying anything clean wipe and stock install .
jje