HUGE favor with clockwork - Motorola Droid 3

can some1 just create a backup, erase data and make a nandroid of the phone so I could restore my phone, then obviously you can just reflash your first back up
THANKS

What's wrong with your phone...?

radio isn't flashed

Nandroid doesn't backup/restore the radio
Sent from my DROID3 using XDA App

still need the stock backup to flash the update correctly

anybody???

Why wouldnt you just use the sbf?

suzook said:
Why wouldnt you just use the sbf?
Click to expand...
Click to collapse
its not a real sbf...and I already tried that

LRiley said:
its not a real sbf...and I already tried that
Click to expand...
Click to collapse
No, its not, its the newer files moto uses. If that didnt work, a nandroid wont help either.

I want to try it so if anybody could give me a stovk nandroid backup it'll be appreciated

LRiley said:
I want to try it so if anybody could give me a stovk nandroid backup it'll be appreciated
Click to expand...
Click to collapse
I'll give it a try, i'm on the leaked OTA tho if that is ok. Your just gonna have to tell me how to get the file to you. My battery is only at 20% right now so i'm going to let it charge first.

Last time I checked it's a bit of a no-no to share nandroids, they are phone specific. Chance are if the SBF didn't help you, then a nandroid won't either.
Have you tried Fastboot?

neilrl79 said:
I'll give it a try, i'm on the leaked OTA tho if that is ok. Your just gonna have to tell me how to get the file to you. My battery is only at 20% right now so i'm going to let it charge first.
Click to expand...
Click to collapse
thanks heres my email [email protected]

Explain what you have tried already, ive noticed that people are trying to flash the xml like a sbf, YOU HAVE TO BE IN AP FASTBOOT MODE to begin with it never works if you start off in SBF mode because it never changes when it tries PRESS VOL + and VOL - AT THE SAME TIME AS POWER AND YOU WILL GET THE MENU press Vol - until u get to AP FASTBOOT then press Vol + , NEXT UNZIP SWU.ZIP TO THE SAME FOLDER NAME IT DROID 3 AND PLACE IT ON YOUR DESKTOP, OPEN RSD LITE it should show the phone as connected if you have all of your drivers installed right of not go by motorola's site and download the drivers INSTALL THEM then plug the phone back up, it should now be showing in RSD lite click the ... and select the file at the top, the file is on your desktop in the DROID 3 Folder u just copied everything to, IT WILL BE THE ONLY ONE YOU CAN SELECT, click that file and click start and in about 5 mins everything will work as new.

techdigital said:
Explain what you have tried already, ive noticed that people are trying to flash the xml like a sbf, YOU HAVE TO BE IN AP FASTBOOT MODE to begin with it never works if you start off in SBF mode because it never changes when it tries PRESS VOL + and VOL - AT THE SAME TIME AS POWER AND YOU WILL GET THE MENU press Vol - until u get to AP FASTBOOT then press Vol + , NEXT UNZIP SWU.ZIP TO THE SAME FOLDER NAME IT DROID 3 AND PLACE IT ON YOUR DESKTOP, OPEN RSD LITE it should show the phone as connected if you have all of your drivers installed right of not go by motorola's site and download the drivers INSTALL THEM then plug the phone back up, it should now be showing in RSD lite click the ... and select the file at the top, the file is on your desktop in the DROID 3 Folder u just copied everything to, IT WILL BE THE ONLY ONE YOU CAN SELECT, click that file and click start and in about 5 mins everything will work as new.
Click to expand...
Click to collapse
...I did that already...

LRiley said:
...I did that already...
Click to expand...
Click to collapse
I emailed that out, did you get it?

LRiley said:
...I did that already...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=17427668&postcount=84
^Maybe try that.

neilrl79 said:
I emailed that out, did you get it?
Click to expand...
Click to collapse
didn't get it yet, it probably a big file so I'll wait for it
and other people not to be disrespectful but stop sending me suggestions I tried everything on this site already...

Derp
So you ask for help then tell us you don't want our help...
Welp anyways we'll be here once you come back for more help...maybe

Yonnor said:
So you ask for help then tell us you don't want our help...
Welp anyways we'll be here once you come back for more help...maybe
Click to expand...
Click to collapse
uhm...I didn't ask for help, I asked for a nandroid...

Related

[Q] [Need Help!!]Captivate bricked!!

I have read the similar threads, none is like mine...
I can enter the download mode, but when I use final one click to restore, it doesn't work. When I tried to enter the recovery mode (hold two volume buttons and power button), there is a figure, which is the cellphone connected with the computer, and there is a yellow triangle exclamation mark.
Help me! I really don't know what to do now...
==========SOLVED, special thanks to sf1120, and also want to thank a lot of people who gave me advices!===============
the solving method is on #16! Thanks for your concern!
michaelgening said:
I have read the similar threads, none is like mine...
I can enter the download mode, but when I use final one click to restore, it doesn't work. When I tried to enter the recovery mode (hold two volume buttons and power button), there is a figure, which is the cellphone connected with the computer, and there is a yellow triangle exclamation mark.
Help me! I really don't know what to do now...
Click to expand...
Click to collapse
What exactly happens when you try?
have you used odin before?
What build is your phone
Miui
3 button hold, when screen goes black, plug in usb and let go buttons. You will get download mode, now odin back to stock and flash new rom.
michaelgening said:
I have read the similar threads, none is like mine...
I can enter the download mode, but when I use final one click to restore, it doesn't work. When I tried to enter the recovery mode (hold two volume buttons and power button), there is a figure, which is the cellphone connected with the computer, and there is a yellow triangle exclamation mark.
Help me! I really don't know what to do now...
Click to expand...
Click to collapse
mcord11758 said:
What exactly happens when you try?
have you used odin before?
What build is your phone
Miui
Click to expand...
Click to collapse
I upgraded from 2.2 to 2.3. But the system seemed unstable. So I decided to downgraded it to 2.1, by using the "one click odin", but it has been unrooted. I tried everything but couldn't root the system, thus I decided to directly flash the kernel. When it freezed, I unpluged the USB and then it happened.
Do I still have the change to save it?
xdahgary said:
3 button hold, when screen goes black, plug in usb and let go buttons. You will get download mode, now odin back to stock and flash new rom.
Click to expand...
Click to collapse
Can you show the the steps of how doing that?
I can enter the download mode, but whatever I did with odin, it failed. What did you suggest to do with odin?
What, what, what!
I am sorry I am not sure I understand what you are trying to say. As long as you can get into dl mode you can be saved. I recovered from that screen twice on monday. What happens when you run odin one click? Have you successfully used it before
michaelgening said:
I upgraded from 2.2 to 2.3. But the system seemed unstable. So I decided to downgraded it to 2.1, by using the "one click odin", but it has been unrooted. I tried everything but couldn't root the system, thus I decided to directly flash the kernel. When it freezed, I unpluged the USB and then it happened.
Do I still have the change to save it?
Click to expand...
Click to collapse
Miui
mcord11758 said:
What, what, what!
I am sorry I am not sure I understand what you are trying to say. As long as you can get into dl mode you can be saved. I recovered from that screen twice on monday. What happens when you run odin one click? Have you successfully used it before
Miui
Click to expand...
Click to collapse
I was telling you the whole story, maybe talked a little too much...sorry
I used odin successfully before. But at this moment I don't know what to do. When in the dl mode, I open odin and plug in USB, it has been recognized, and then what should I do? My odin is 1.7
michaelgening said:
Can you show the the steps of how doing that?
I can enter the download mode, but whatever I did with odin, it failed. What did you suggest to do with odin?
Click to expand...
Click to collapse
Michael, check the build number of your phone (look at the sticker that lives under the phone's battery). If it's anything past 1010 (and in some cases, 1008), ODIN 1-Click will not work. You'll need to find and download ODIN3 and the proper .PDA and .PIT files.
You will, however, still need ODIN 1-click to do a Master Clear of the phone, so don't get rid of it.
michaelgening said:
I was telling you the whole story, maybe talked a little too much...sorry
I used odin successfully before. But at this moment I don't know what to do. When in the dl mode, I open odin and plug in USB, it has been recognized, and then what should I do? My odin is 1.7
Click to expand...
Click to collapse
So it is not the one click. Do you have the correct pit and pda.files. Did you check repartition?
What 2.3 where you flashing?
Have you tried odin one click
Miui
kevalin said:
Michael, check the build number of your phone (look at the sticker that lives under the phone's battery). If it's anything past 1010 (and in some cases, 1008), ODIN 1-Click will not work. You'll need to find and download ODIN3 and the proper .PDA and .PIT files.
You will, however, still need ODIN 1-click to do a Master Clear of the phone, so don't get rid of it.
Click to expand...
Click to collapse
Hi Kevalin, if I was doing right, the number under "S/N" is 1008, does that mean I can use odin 1-click? Why did nothing happen... I always met weired things, I guess this is one more...
mcord11758 said:
So it is not the one click. Do you have the correct pit and pda.files. Did you check repartition?
What 2.3 where you flashing?
Have you tried odin one click
Miui
Click to expand...
Click to collapse
Well... I use this "I897UCJF6-final-OCD-REV0" to downgrade it, is this the odin one click?
After the captivate was unrooted, I could do nothing to root it again. Although after reinstall packages, I saw the "superxxxx"(sorry forgot the name), I still couldn't install apps from third-party.
I followed the video in this thread "http://forum.xda-developers.com/showthread.php?t=978150" completely to flash my cell, I didn't understand why he told to replace a .tar with a .zip, so I was totally lost, but it worked.
kevalin said:
Michael, check the build number of your phone (look at the sticker that lives under the phone's battery). If it's anything past 1010 (and in some cases, 1008), ODIN 1-Click will not work. You'll need to find and download ODIN3 and the proper .PDA and .PIT files.
You will, however, still need ODIN 1-click to do a Master Clear of the phone, so don't get rid of it.
Click to expand...
Click to collapse
Sorry I didn't notice 1008 you mentioned. I am trying odin3 one click to do a master clear, but since it freezed, I don't expect any from this.
Could you show me what .pda and .pit files should I need? Thanks a lot!
michaelgening said:
Sorry I didn't notice 1008 you mentioned. I am trying odin3 one click to do a master clear, but since it freezed, I don't expect any from this.
Could you show me what .pda and .pit files should I need? Thanks a lot!
Click to expand...
Click to collapse
You need to connect in download mode and hit start. You can not master clear in dl mode
Sent from my Google Nexus S using XDA Premium App
mcord11758 said:
You need to connect in download mode and hit start. You can not master clear in dl mode
Sent from my Google Nexus S using XDA Premium App
Click to expand...
Click to collapse
tried, didn't work, I guess it's the pit or pda files. Any other suggestion?
Thanks anyway!
What happens?
Do you open odin first?
Then download mode?
Does odin recognize your device?
When you hit start, what happens?
Sent from my Google Nexus S using XDA Premium App
michaelgening said:
Sorry I didn't notice 1008 you mentioned. I am trying odin3 one click to do a master clear, but since it freezed, I don't expect any from this.
Could you show me what .pda and .pit files should I need? Thanks a lot!
Click to expand...
Click to collapse
here you go.
http://forum.xda-developers.com/showthread.php?t=818439
sf1120 said:
here you go.
http://forum.xda-developers.com/showthread.php?t=818439
Click to expand...
Click to collapse
I found the similar one for Tmobile, and was going to try it... thank god u brought me this. I really appreciate it! Report to you soon...
mcord11758 said:
What happens?
Do you open odin first?
Then download mode?
Does odin recognize your device?
When you hit start, what happens?
Sent from my Google Nexus S using XDA Premium App
Click to expand...
Click to collapse
when I hit start, nothing happened. i did according to what sf1120 told me, and it has been solved, thank you all the same!
sf1120 said:
here you go.
http://forum.xda-developers.com/showthread.php?t=818439
Click to expand...
Click to collapse
healed man! Thanks a loooooooooooooot!
btw, would you instruct me how to install the the kernel that is .zip in this link "http://forum.xda-developers.com/showthread.php?t=962780"? What does it mean by saying "FLASH THIS WITH CLOCK WORK MOD"? Do I enter the recovery mod and install the zip from sd? Thanks in advance!

galaxy tab sgh-t849 I need professional help

I just got this tab and like every other android i get I rooted it. I used superoneclick -- worked fine. then downloaded cwm and flashed the recovery. of course when i went into recovery it was 3e so i couldnt actually use cwr without the bypass fix. Anyway -- i used some recovery fix -- which i think was for a vibrant -- wasn't thinking. Once it rebooted into recovery it showed some yellow letters then went blank. The computer still recognizes it but the tab won't boot. i can reset it by turning it off and on but it only shows tmobile splash and the yellow letters scrolling in recovery then goes blank again. please help. i've been reading everything but no one seems to have had this problem.
thank you very much
Put it in a blender, jk, send it back to samsung.
Sent from my SGH-T849 using XDA App
atomiq said:
Put it in a blender, jk, send it back to samsung.
Sent from my SGH-T849 using XDA App
Click to expand...
Click to collapse
is that really my best option??
i figured there would be some manual way to reflash the recovery or maybe complete firmware with a recovery built in. it will still go into download mode -- like i said the computer still recognizes it but I just don't know where to start. ive never used odin and not a pro at adb/sdk but i can usually follow directions pretty well. i've rooted g1's, mytouch 3g fenders slides, inspires, atrix, vibrant, captivates so i'm not giving up yet. i know someone is willing to help.
from the off position, when you press and hold volume down then a moment later without letting up from volume down also hold power button until lights turn on, what does it do?
download all below zips, and unzip them
run it usb driver. say yes to everything. plug in tab to computer in download mode. let it install tab drivers
unplug tab.
open odin
Watch the first box on the left. ID:COM
plug in tab to comp in download mode.
That box should light up yellow, that means your tab in connected and ready to go.
place unzipped stock rom in PDA.
Press Start.
When done it should say all threads completed, and your tab should restart on its own.
Let it boot, and welcome back to stock Tmobile
uploads are taking a bit, be patient.
Do you want stock 2.2, or 2.3?
yes -- it goes into download mode
sounds promising -- thank you -- i will keep you updated on the progress.
prefer 2.2 where it was.
thanks so much
REMOVED!!!!!
here is dropbox of everything you need. It is a stock firmware, no root.
once we get you back up and running, we will go from there.
please let me know the moment you have downloaded this zip, as it sucks my bandwidth.
Drop box removed. Avaiable upon request
Sent from my GT-P1000 using XDA Premium App
so? i would like to request the download then...
the files being removed?
gottarootit said:
so? i would like to request the download then...
the files being removed?
Click to expand...
Click to collapse
i will put it up again for an hour. Gimmie a second, gonna add stock tmobile 2.2 also
here ya go, JMK is stock Gingerbread, And the other is 2.2. If you are going to 2.2, you dont need to worry about any of the modems in the zip folders.
just open odin and and place stock tar file
REMOVED!!!!!!
ssserpentine said:
here ya go, JMK is stock Gingerbread, And the other is 2.2. If you are going to 2.2, you dont need to worry about any of the modems in the zip folders.
just open odin and and place stock tar file
REMOVED!!!!!!
Click to expand...
Click to collapse
beautiful --- just flashed with odin and went through with no problems. once back up i re-ran the root and unlock. now i'm gonna wait to flash cwr until i'm good and sure i know what i'm doing. btw -- i flashed a new kernel with recovery before the full restore and that didn't help. i'm not positive but i guess thats how you get clockwork rec to work.?
thanks so much.
can someone help me with the same issue. I am getting no boot on this tablet. I have tried the volume button and power with no luck. Can someone send me a link for the stock sprint restore.
gottarootit said:
beautiful --- just flashed with odin and went through with no problems. once back up i re-ran the root and unlock. now i'm gonna wait to flash cwr until i'm good and sure i know what i'm doing. btw -- i flashed a new kernel with recovery before the full restore and that didn't help. i'm not positive but i guess thats how you get clockwork rec to work.?
thanks so much.
Click to expand...
Click to collapse
Which did you go with? 2.2 or 2.3.3?
Let me know what your tab currently says in settings, about device.
Hold down the back arrow, and while still holding a second later, press you powerbutton. Let go.
Shoulda taken a screen shot. Uoload it here or just write it down.
I can guide you from there.
"42"
mnbgibbs said:
can someone help me with the same issue. I am getting no boot on this tablet. I have tried the volume button and power with no luck. Can someone send me a link for the stock sprint restore.
Click to expand...
Click to collapse
get the samsung usb drivers. Included in keis, but google and download just usb driver if you dont have kies.
Instal.
Plug in tab.
Let drivers instal.
Download and open Odin.
There is.a box on the left below an open window, is it blank? (no yellow color?)
If so, your okay so far. If not and it has a yellow, still good.
Plug in tab to comp.
Did a yellow box appear? Or a second one if ine allready there?
hi, i bricked my t849 by wrong flashing..still can go to download mode.can you upload file again to recover my PDA
sharaz191 said:
hi, i bricked my t849 by wrong flashing..still can go to download mode.can you upload file again to recover my PDA
Click to expand...
Click to collapse
i posted the link for ya there .. check it
after update stuck at galaxy tab logo...any other help sir
ok download stock rom froyo and not Gingerbread
where can i find froyo version?

Need HELP, think im Bricked!!

I was trying to Install the 1% battery for axiom... and now im stock on the DUAL CORE screen.. already tried to restore my backups via stock recovery(holding power and up/down button) but when i click on the folder nothing shows up.
Will Appreciate Any help!
whodat70003 said:
I was trying to Install the 1% battery for axiom... and now im stock on the DUAL CORE screen.. already tried to restore my backups via stock recovery(holding power and up/down button) but when i click on the folder nothing shows up.
Will Appreciate Any help!
Click to expand...
Click to collapse
sounds bad... might have to return to stock..
try RSD Lite
Extract this Flashme.zip to the desktop
Open RSD Lite click the ... and select default flash targa
Click Start let it run until it says finished or you have to do it again
Go make some coffee
I really Dont Care if i have to go back to stock as long i can get it fix...
Do you know any link that shows step by step instructions? im a noob brother!!
but im already downloading those links! thank u bro!
that Flashme zip... in what step i have to use it?
whodat70003 said:
that Flashme zip... in what step i have to use it?
Click to expand...
Click to collapse
Just extract it to desktop
make sure you have some juice in your battery... as a matter of fact take the battery out while you get set up
iNsAnEmOd said:
Just extract it to desktop
Click to expand...
Click to collapse
Already Downloading!! my question is in what Point when RSD is running i have to use that flashme file?
You had this Issue Before? yes i do have my battery out!
Man, still downloading that flashme zip... 23 min. to go!
Thank you so much brother for taking your time Helping me!
whodat70003 said:
Already Downloading!! my question is in what Point when RSD is running i have to use that flashme file?
Click to expand...
Click to collapse
DUUUDE...... you don't use the "zip" you EXTRACT THE "ZIP" TO THE DESKTOP AND USE THE FILES INSIDE.
COMPLETE BREAKDOWN
When "flashme.zip" is finished download do these thing in this order
Click the zip and put EVERYTHING that is inside on the DESKTOP
When that is done
Open RSD Lite
Click the ... at the top
In the window that pops up go to the DESKTOP if it isn't already on it
Find "default_flash_targa.xml" and select it
Put your phone in AP FlashBoot Mode
(How To)
Power Down Phone
Hold Volume Down Button And Hold Power Button For 2 Sec
Let Go
(Updated Drivers if you don't have them.)
Click Start and LET IT RUN UNTIL IT SAYS FINISHED OR YOU'LL HAVE TO DO IT ALL OVER
Go make some coffee
It's really that easy
---------- Post added at 11:57 AM ---------- Previous post was at 11:55 AM ----------
Yeah dude I bRicK mY bIoNiC at least twice a week.
Hey Bro, Found This Instructions!
You think they Right?
Noob guide:
ok. We'll approach this like there is nothing installed on your pc.
1.Open the moto-tools folder and install the 5.2.1 drivers. (32 or 64) depending on your pc........In the 6th zip
2. I turn off wi-fi on my pc now. (so drivers won't auto update-paranoia probably) Then i plug my phone into the pc and toggle through all usb modes to install all the drivers.
3. Install rsd lite 5.5 from moto-tools........In the 6th zip
4. unzip the flashme zip to a folder on your desktop
5. Open rsd lite (some people have more success running it as admin. )and press the |…| box next to the search bar. Browse to the folder you extracted everything to on your desktop.
6. select the default_targa_flash_xml file but don't start yet.
7. power down your device.
8. Hold both volume buttons while pressing power
9. use down volume to toggle to ap fastboot and press volume up to select.
10. run the xml file.
11. pray like hell
whodat70003 said:
Hey Bro, Found This Instructions!
You think they Right?
Noob guide:
ok. We'll approach this like there is nothing installed on your pc.
1.Open the moto-tools folder and install the 5.2.1 drivers. (32 or 64) depending on your pc........In the 6th zip
2. I turn off wi-fi on my pc now. (so drivers won't auto update-paranoia probably) Then i plug my phone into the pc and toggle through all usb modes to install all the drivers.
3. Install rsd lite 5.5 from moto-tools........In the 6th zip
4. unzip the flashme zip to a folder on your desktop
5. Open rsd lite (some people have more success running it as admin. )and press the |…| box next to the search bar. Browse to the folder you extracted everything to on your desktop.
6. select the default_targa_flash_xml file but don't start yet.
7. power down your device.
8. Hold both volume buttons while pressing power
9. use down volume to toggle to ap fastboot and press volume up to select.
10. run the xml file.
11. pray like hell
Click to expand...
Click to collapse
thanks dude.. I took all that time.... go for it
iNsAnEmOd said:
DUUUDE...... you don't use the "zip" you EXTRACT THE "ZIP" TO THE DESKTOP AND USE THE FILES INSIDE.
COMPLETE BREAKDOWN
When "flashme.zip" is finished download do these thing in this order
Click the zip and put EVERYTHING that is inside on the DESKTOP
When that is done
Open RSD Lite
Click the ... at the top
In the window that pops up go to the DESKTOP if it isn't already on it
Find "default_flash_targa.xml" and select it
Put your phone in AP FlashBoot Mode
(How To)
Power Down Phone
Hold Volume Down Button And Hold Power Button For 2 Sec
Let Go
(Updated Drivers if you don't have them.)
Click Start and LET IT RUN UNTIL IT SAYS FINISHED OR YOU'LL HAVE TO DO IT ALL OVER
Go make some coffee
It's really that easy
---------- Post added at 11:57 AM ---------- Previous post was at 11:55 AM ----------
Yeah dude I bRicK mY bIoNiC at least twice a week.
Click to expand...
Click to collapse
LOL I know i don't have to USE the ZIP... i was just asking u at what point i had to move it to the phone when RSD was running!
Thanks for the Instructions BRO!
whodat70003 said:
LOL I know i don't have to USE the ZIP... i was just asking u at what point i had to move it to the phone when RSD was running!
Thanks for the Instructions BRO!
Click to expand...
Click to collapse
ITS NOT SUPPOSED TO BE ON YOUR PHONE!!!! You're thinking to hard about this man
UbERnOoB
iNsAnEmOd said:
ITS NOT SUPPOSED TO BE ON YOUR PHONE!!!! You're thinking to hard about this man
UbERnOoB
Click to expand...
Click to collapse
Lol.
Sent from the Evil Empire
Ok!! Did everything and looks like is fixed.... but after my phone reboot it i did all the sign in google accounts and all that set up... i have data.. everything looks good. But... RSD is asking me to"Manually power up this phone" option but everything looks fine. What should i do? can i just close it?
One more Question.. Can i ROOT this bad boy again? what method should i use?
whodat70003 said:
Ok!! Did everything and looks like is fixed.... but after my phone reboot it i did all the sign in google accounts and all that set up... i have data.. everything looks good. But... RSD is asking me to"Manually power up this phone" option but everything looks fine. What should i do? can i just close it?
One more Question.. Can i ROOT this bad boy again? what method should i use?
Click to expand...
Click to collapse
Let RSD run until it says finished
R3l3AS3DRoot and 43V3R Root
MotoFail Root
iNsAnEmOd said:
Let RSD run until it says finished
R3l3AS3DRoot and 43V3R Root
MotoFail Root
Click to expand...
Click to collapse
Hey Bro, I wanna Thank you for taking you time helping me.
ps. RSD status is the same after 20 min. but phone seems to be just fine bro.
whodat70003 said:
Hey Bro, I wanna Thank you for taking you time helping me.
ps. RSD status is the same after 20 min. but phone seems to be just fine bro.
Click to expand...
Click to collapse
no prob...
200th post...
Man, I dont know what happen! After i had everything working fine... i was already on .886 using my phone just perfect then i rooted and no problem so far but then i got the ota update from .893 click install and i dont know what happend bro.. now im on this AP Fastboot flash mode (s) Invalid CDT screen... try to run that Flash-targa.xml file with RSD and it fails!
What should i do bro?
whodat70003 said:
Man, I dont know what happen! After i had everything working fine... i was already on .886 using my phone just perfect then i rooted and no problem so far but then i got the ota update from .893 click install and i dont know what happend bro.. now im on this AP Fastboot flash mode (s) Invalid CDT screen... try to run that Flash-targa.xml file with RSD and it fails!
What should i do bro?
Click to expand...
Click to collapse
Man you didnt have to do that again
Extract this FixCDT.zip to desktop and run the batch file.
Next time look through xda for help cuz you might have to run RSD Lite again.
iNsAnEmOd said:
Man you didnt have to do that again
Extract this FixCDT.zip to desktop and run the batch file.
Next time look through xda for help cuz you might have to run RSD Lite again.
Click to expand...
Click to collapse
Downloading now!
Thank you bro, I really thought this was the end of this phone.
What is it that i didnt have to do bro?

Droid 3 Stuck at M Logo - Bricked?

Hey guys,
I just recently got a refurb Droid 3 after my old one had the backlight go out, I hand't had a chance to bootstrap it and put ICS on it. But I was able to get it rooted. I restarted my phone today and ever since it has been stuck at the M logo screen and I've tried everything I can find to remedy this.
I updated this morning to the most recent OTA update (5.7.906 I believe) and then rooted it.
To fix the issue I've tried a few different things. I tried Pete's SBF to 5.7.890 but I was getting an error about the cbt.bin file. I found that with the recent changed to 5.7.906 you aren't able to directly flash over it to go back to 5.7.890. I then found another post on here which had a script to go back to 5.7.890 from 5.7.906. I ran that and still had the same result.
Any other ideas or anything that I am missing?
I can get into fastboot, I've been using the scripts with moto-fastboot. Normal boot is just leaving me at the M logo, booting into recovery yields the same result.
Any help would be appreciated since I have no clue what else I can do at this point...
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Juicy555 said:
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Click to expand...
Click to collapse
I don't have a BT Tools selection. I do have BP Tools though. I selected it and it just sits there on the M logo as well...
I've tried a few of Pete's scripts with no luck so far (worked on the old Droid 3 when I put it back to stock before shipping it back).
Juicy555 said:
seems like a soft brick... should be fixable...
With the phone off, hold me, then the power button... then go down to BT TOOLS and select it ( volume up is the select button _ so when u do that it doesnt go to it?
try following this thread
http://forum.xda-developers.com/showthread.php?t=1336980
heres a download link
http://minus.com/lbkaxv58pO5MDp
Click to expand...
Click to collapse
Gave the one that you linked a try, get "Preflash validation failure" for Recovery and Boot.
Any other ideas?
imperpetual said:
Gave the one that you linked a try, get "Preflash validation failure" for Recovery and Boot.
Any other ideas?
Click to expand...
Click to collapse
it will not flash if your phone is not charged to at least 50%.. make sure its charged...
Juicy555 said:
it will not flash if your phone is not charged to at least 50%.. make sure its charged...
Click to expand...
Click to collapse
It is charged. When it's not charged it gives the "LOW BATTERY" error.
click the link in my signature
and follow the directions in my thread and you will be fine
you updated your phone to. 906 all of the older sbf's wont work..but mine will as it is specifically for. 906
ovelayer said:
click the link in my signature
and follow the directions in my thread and you will be fine
you updated your phone to. 906 all of the older sbf's wont work..but mine will as it is specifically for. 906
Click to expand...
Click to collapse
Your 1 Click SBF ran fine and completed without errors but I'm still getting the same result, stuck at M logo.
Is there something I could be missing which is making it not boot that most SBFs don't include? That's the only thing I can think of at this point.
imperpetual said:
Your 1 Click SBF ran fine and completed without errors but I'm still getting the same result, stuck at M logo.
Is there something I could be missing which is making it not boot that most SBFs don't include? That's the only thing I can think of at this point.
Click to expand...
Click to collapse
okay right after you use the 1click sbf
go HERE
download the. 906 update
place it on your external sdcard..
reboot into STOCK recovery and install the update
reboot
try that
ovelayer said:
okay right after you use the 1click sbf
go HERE
download the. 906 update
place it on your external sdcard..
reboot into STOCK recovery and install the update
reboot
try that
Click to expand...
Click to collapse
I'm fairly certain that could work, if I could ever get into the Stock recovery....I'm not able to boot into anything. Going to try a few other things, if nothing else works I'll just take it in and see if I can get yet another warranty replacement.
Thanks for the responses, if you have any other ideas just let me know.
I think the main thing that needs to be addressed is that I need to be able to get into recovery and then I will be set to fix it. Right now it just sits at the M logo for Recovery (and any other options from the boot menu).

CM 10.1.3 Accidentally Installed on Stock Help!!!

I forgot to activate rom slot 1 when flashing so it installed on the stock rom, which said if this was done it would not work, and now the phone will power off at the motorola logo. I made a backup with cwm and it is on my computer as a few .md5 and .win files. It also wont let me load safestrap even though i hold down the buttons to go into bootloader. Please help i really need it fixed
Violentbacon said:
I forgot to activate rom slot 1 when flashing so it installed on the stock rom, which said if this was done it would not work, and now the phone will power off at the motorola logo. I made a backup with cwm and it is on my computer as a few .md5 and .win files. It also wont let me load safestrap even though i hold down the buttons to go into bootloader. Please help i really need it fixed
Click to expand...
Click to collapse
Can you get to AP fastboot? If so, you can then use this utility found here. http://forum.xda-developers.com/showthread.php?t=2207384
You would want to do the full wipe install of jelly bean, so option 1. This should make your phone basically factory new, where you'll have to reroot it and redo safestrap/CM.
RoninRyan said:
Can you get to AP fastboot? If so, you can then use this utility found here. http://forum.xda-developers.com/showthread.php?t=2207384
You would want to do the full wipe install of jelly bean, so option 1. This should make your phone basically factory new, where you'll have to reroot it and redo safestrap/CM.
Click to expand...
Click to collapse
I would try that, but when I start AP fastboot, it reads: battery low, cannot program. I have left it plugged in for 24 hours and still the same message. When I select BP tools, the battery icon shows up with a "?" sign in it instead of a charge percentage.
EDIT- It has begun recharging when I chose BP Diag, and I will update when I attempt to run the razr utility
I would like to say the utility worked! I am very happy that it was fixed. Thank you very much!
Violentbacon said:
I would like to say the utility worked! I am very happy that it was fixed. Thank you very much!
Click to expand...
Click to collapse
Glad to hear. Happy rom flashing.

Categories

Resources