Related
I posted a question last week and I was installing the ROM and windows crashed. My phone now has the bootloader screen (colored screen with USB in the corner). I had already upgraded to 2.17 which was fine. Any thoughts?
If you can still access the bootloader you have not fried your phone. Get it into bootloader - plug in your USB and connect to your PC and run the ROM upgrade again. If it fails again check the ROM is a good version ( re-download if your not sure) Failing that, do the process on a different PC.
BTW you do not need to run Activestink on the PC.
Best of luck :lol:
I was trying to flash rom,
after i get into download mode,
then i set up the odin n plug in the usb,
but odin didnt have any response (the id:com supposed to be yellow right?)
does anyone of u know how to fix it?
normalife said:
I was trying to flash rom,
after i get into download mode,
then i set up the odin n plug in the usb,
but odin didnt have any response (the id:com supposed to be yellow right?)
does anyone of u know how to fix it?
Click to expand...
Click to collapse
Does kies reconize phone? maybe a driver issue? usb debugging enabled? Have you had any probs before with odin? What version of odin? Maybe update it..
And another thing make sure you plug usb directly into pc not usb hub and with original usb cable.
tragusman said:
Does kies reconize phone? maybe a driver issue? usb debugging enabled? Have you had any probs before with odin? What version of odin? Maybe update it..
And another thing make sure you plug usb directly into pc not usb hub and with original usb cable.
Click to expand...
Click to collapse
Thanks for yr reply,
i already enable debugging, and plug the usb directly.
and the odin version is v1.70, i guess its the latest one.
actually it couldnt connect either with kies and my computer after i turn on the usb (the orange android logo on screen), both on my vista and xp..
normalife said:
Thanks for yr reply,
i already enable debugging, and plug the usb directly.
and the odin version is v1.70, i guess its the latest one.
actually it couldnt connect either with kies and my computer after i turn on the usb (the orange android logo on screen), both on my vista and xp..
Click to expand...
Click to collapse
Then, you should first install the USB drivers for your phone. It is not possible to connect to your phone neither through KIES or ODIN unless you install the drivers first.
rajuki said:
Then, you should first install the USB drivers for your phone. It is not possible to connect to your phone neither through KIES or ODIN unless you install the drivers first.
Click to expand...
Click to collapse
how should i install the drive? the computer should be install it automatically, isnt it? i just google that and download a software call samsung pc studio but it still cant search my phone..
normalife said:
how should i install the drive? the computer should be install it automatically, isnt it? i just google that and download a software call samsung pc studio but it still cant search my phone..
Click to expand...
Click to collapse
Try these http://graveyard.hu/SAMSUNG_USB_Driv...Phones_x86.zip
I hope you are running a 32 bit version of windows.
Hello,
My Samsung Galaxy S is listed as Unknown Device.
It started after an update to 2.2 via Kies and i did that with the regedit exploration. That was the 2.2 beta and then i updated it again with the official release this time also with the regedit exploit. I have formated the internal SD (i cant dismount it cause im on froyo i guess? atleast there is no option about it). Factory reset and so on.
Reinstalled kies 5 times, installed USB drivers again and again. I have tried it on different platforms with both XP (32-bit), Vista (32-bit) and Slackware Linux (32-bit). The computors just cant find drivers for the device.
I have tried all the different usb options in the phone settings nothing happends. I think i have tried everything that can be found here and on google...
The phone is Rooted and im now on PDA: I9000XWJP6, PHONE: I9000XXJPM, CSC: I9000XEEJP4.
Build Info: 2010. 10.
I believe the main thing here is that i dont even get the MTP application in the phone to recognize that a USB connection have been initialized. Nothing happend in the phone when i connect the USB no MTP screen or anything, just chargeing. I have tried 2 diffrent usb cords both that worked before so its not that.. The computor just says unknown device and Kies dont notice anything at all.
I have tried installing another firmware with Odin in Download mode and stil unknown device.
So i believe the phone have, in some way lost its internal usb drivers? I have also noticed that the battery "100% charged" icon does not disapear after i disconnect the usb or the charger. Also sometimes the icon continues to charge after i disconnect. Sometimes when i turn the phone of it starts by itself after like 2 min.
Anyways! What i was wondering is if there is a way to install an official firmware via update.zip volume-up+home+power?
When i try to install a customized rom with update.zip it says:
E:signature verification failed Installation aborted.
Cause of 3e bootloader? But i think its best to maby have a good stable firmware before i go customized?
So any help would be appreciated!!! heeeeeeeelp.....
Try installing theses drivers x64 x86 depending on what operating system you're on.
If that doesn't work try going into download mode and connect with odin. With the recovery problem you need to flash 2e recovery
You can also try and download and flash the latest version firmware to your phone and see if that helps.
Good luck and tell me how it goes
Serikiito said:
Try installing theses drivers x64 x86 depending on what operating system you're on.
If that doesn't work try going into download mode and connect with odin. With the recovery problem you need to flash 2e recovery
You can also try and download and flash the latest version firmware to your phone and see if that helps.
Good luck and tell me how it goes
Click to expand...
Click to collapse
Hi m8!
Thx for the reply!
I have allready tried installing those drivers doesnt work for me.
I have tried Download mode with Odin to, it still says Unknown Device in Windows (i have Vista 32-bits, but tried it on XP and Linux to).
So anything that has to do with a USB-connection seems impossible at the moment...
The phone dont start the MTP application at all and windows dont install the drivers, it just says unknown device when trying to install.
I just unistalled Kies and removed everything from regedit with "kies" in it and then rebooted and downloaded a new fresh Kies file. Installed it and rebooted again while i wiped the phone, formated the SD and did a factory reset.. still "Unknown Device" :[
The problem seems to be the software in the phone.. so my question is: Is there is anyway to update or flash the firmware in the phone without any USB connection?
Is there maby any way to get 2e recovery mode without usb connection?
Endombed said:
Is there maby any way to get 2e recovery mode without usb connection?
Click to expand...
Click to collapse
There is an app in the Android Development section here that allows you to flash a kernel within Android. Never tried it myself but I believe it is now stable and you could use it to flash CF-Root internally
EDIT: Here you go...
http://forum.xda-developers.com/showthread.php?t=877444
Have you tried recovery mode? Big yellow triangle with Android man holding shovel. Then connect to PC with Kies running and click on firmware update button.
Thx man!
But it seems that i dont have root access anymore, so cant use that app either :/ i think im a hopeless case.. :[
Tehpriest said:
Have you tried recovery mode? Big yellow triangle with Android man holding shovel. Then connect to PC with Kies running and click on firmware update button.
Click to expand...
Click to collapse
Yes man.. i get the same thing with the Yellow friend that says "Do not turn of target!!!"..
"One of the USB devices attached to this computor has malfunctioned. And Windows does not recognize it."
and also
"Unknown Device Installed
The software for this device has been successfully installed.
Unknown device - - Ready to use"
Are you connecting through a hub or direct to the back port of the PC. A hub will cause problems. If direct then try this.. Plug in and wait till you get the unrecognised device info. go into device manager, identify the device it will either say Samsung or unknown device. right click and remove device say yes if it asks if you want to delete the driver. now restart the pc after unplugging the usb then after it has fully restarted and connected to the net plug it back in again. Hopefully it will look on the net for the driver and install the correct one.
Tehpriest said:
Are you connecting through a hub or direct to the back port of the PC. A hub will cause problems. If direct then try this.. Plug in and wait till you get the unrecognised device info. go into device manager, identify the device it will either say Samsung or unknown device. right click and remove device say yes if it asks if you want to delete the driver. now restart the pc after unplugging the usb then after it has fully restarted and connected to the net plug it back in again. Hopefully it will look on the net for the driver and install the correct one.
Click to expand...
Click to collapse
Yep tried that to.. i have even tried it on 3 diffrent computers 2 of them in all usb ports.. and everything els works that was connected in those ports.
I dont think its the software in the computer that is the problem.. :/
I believe there is some internal (in the phone) usb firmware problem, if thats possible?
i have exactly the same problem my usb by giving uknown device (i used it at 3 computer with kies software) it seems usb not working anywhere.
I believe our only solution is to find a way to install e2 recovery via the phone.
I have this problem also.
My SGS is rooted.
I tried everything. Googled many hour.
I din't know what more to do.
I have "Android system recovery <2e>" Is this an advantage?
I turned the phone in to my provider. this message is what i got from the repairservice.
Repair Details: The phone's charge connector is moisture/water -damaged, can not be repaired. returned without action.
WTF?!! i have been really careful with the phone. The only thing i can think of is that it has been really cold where i live (Sweden) and i had it in my pocket.. but i mean cmon! it goto withstand that!
I guess i have to wait for samsung to make it possible to update firmware via Wifi.
Neon2 said:
I have this problem also.
My SGS is rooted.
I tried everything. Googled many hour.
I din't know what more to do.
I have "Android system recovery <2e>" Is this an advantage?
Click to expand...
Click to collapse
With Recovery 2e i think it can be possible to update your phones firmware with the update.zip file but i think you need to have your phone rooted.
Repair Details: The phone's charge connector is moisture/water -damaged, can not be repaired. returned without action.
All makes of Smartphone seem to suffer from, condensation problem .
Or at least thats what the service centres
jje
Endombed said:
With Recovery 2e i think it can be possible to update your phones firmware with the update.zip file but i think you need to have your phone rooted.
Click to expand...
Click to collapse
I think so. I have my phone rooted and also ROM Flash Manager installed. The issue now is to find an european stock image to flash compatible with ROM Flash Manager
I looked for the stock firmware image (my phone has JF3) but can't find where.
Anyone?
I don't want to flash a cooked image just in case I have to ship the phone to the repair service.
Hello, I have exactly the same problem.
My SGS is unrooted, due to warranty, and alway keep it with maximum care (it is not a free phone...).
Symptoms are the same:
-It started after an update to 2.2 via Kies
-Absolutely unrecognized by windows (xp32 and win764) anymore
-battery "100% charged" icon does not disappear after i disconnect the usb or the charger
-turning the phone off it starts by itself after like 2 min.
More: incredible but sometimes when connected to car charger, I have the message "usb connected".
Already tried all possible (unrooted) tricks.
I believe usb internal drivers (if any) are corrupted (maybe by moisture?), how to reinstall them?
Maybe usb connector damaged; I have moved a little bit with a scrwdrvr the usb connector plate and clean with air and a thin blade but no result.
I will bring to service, as warranty is still valid, but surely they will discard me (I am optimist)
If there is any solution, please post it.
Hello,
Same here, can't connect phone to pc, mtp dont start on phone after connect it on pc !
Anyone know how flashback stock rom if its possible ?
Hi someone have a stock firmware for flash it in to recovery ?
I think i will try send the phone to samsung after reflashing for see what the guys from samsupport says about this !
Yes, if a part of firmware has been corrupted (with usb info for pc recognition) maybe the solution is to reinstall entire rom.
How to find a stock rom?
How to reinstall rom from SD card in a non rooted phone with no usb connection?
Hi I need some help from you guys my HTC Incredible S is stuck on HTC logo
S - ON RL
HBOOT 1.16.0000
Radio 3805.09.03.27_M
i tried RUU RUU_VIVO_SENSE30_S_HTC_WWE_3.11.405.2_Radio_20.4805.30.0822U_3822.01.08.14_M_release_252414_signed_4
But i am getting this error
ERROR [170]: USB CONNECTION ERROR
This error message will appear when the Android phone is not correctly connected to the host PC. It might be a USB connection problem or a PC USB driver problem. Make sure the Android phone is connected to the host PC correctly and/or check if the PC driver matches the Android phone.
Click to expand...
Click to collapse
USB cable is fine i attached my Sensation and it works fine. any suggestions?
Just making sure, only your incredible s is plugged in, right? Your sensation is not plugged in too?
Do you have the correct drivers and stuff installed?
markj338 said:
Just making sure, only your incredible s is plugged in, right? Your sensation is not plugged in too?
Do you have the correct drivers and stuff installed?
Click to expand...
Click to collapse
Yes Only HTC Incedible S 1 cell phone at a time.
That's the thing when i connect Incedible S i go to Device manager i cant see any Android phone there But when i connect HTC sensation i can see Android Phone in Device manager
Cateye said:
Yes Only HTC Incedible S 1 cell phone at a time.
That's the thing when i connect Incedible S i go to Device manager i cant see any Android phone there But when i connect HTC sensation i can see Android Phone in Device manager
Click to expand...
Click to collapse
Do you have the phone connected in Charge Only mode? Have you tried turning Debugging Mode on?
tpbklake said:
Do you have the phone connected in Charge Only mode? Have you tried turning Debugging Mode on?
Click to expand...
Click to collapse
I can't check if cellphone is in Debugging mode or not because when i turn on the cellphone i see HTC logo and then nothing happens. cell phone is stuck on HTC Logo
Use latest HTC drivers and don't forget to remove HTC Sync if installed. Also try another usb port and another usb cable.
I have installed latest drivers through HTC Sync then UNinstall HTC Sync software
Use 2 different Data cables. Tried different USB ports but every time i attach HTC Incredible S computer can't find any Android Device in device manager. On the other hand when i attach HTC sensation Device manager recognise the android device.
if i cant solve this problem then my guess is that every time i try to run RUU i will get Error 170 so please help me out guy ....
Cateye said:
I can't check if cellphone is in Debugging mode or not because when i turn on the cellphone i see HTC logo and then nothing happens. cell phone is stuck on HTC Logo
Click to expand...
Click to collapse
Can you still get to the HBOOT menu? If so, does the device show up if you select the FASTBOOT option on the HBOOT screen?
It should change the screen to FASTBOOT USB mode.
tpbklake said:
Can you still get to the HBOOT menu? If so, does the device show up if you select the FASTBOOT option on the HBOOT screen?
It should change the screen to FASTBOOT USB mode.
Click to expand...
Click to collapse
Now all i have to do is run RUU right?
Cateye said:
Now all i have to do is run RUU right?
Click to expand...
Click to collapse
What happns if you select FASTBOOT from that same menu? It should change to FASTBOOT USB and then check Device Manager again.
If so, yes I would go ahead and try running the RUU again.
i did select FastBoot and it changes into FastBoot USB
and then i run RUU RUU_VIVO_SENSE30_S_HTC_WWE_3.11.405.2_Radio_20.4805.30.0822U_3822.01.08.14_M_release_252414_signed_4
for 40 mins i saw this message and nothing happens
Any suggestions?
Cateye said:
i did select FastBoot and it changes into FastBoot USB
and then i run RUU RUU_VIVO_SENSE30_S_HTC_WWE_3.11.405.2_Radio_20.4805.30.0822U_3822.01.08.14_M_release_252414_signed_4
for 40 mins i saw this message and nothing happens
Any suggestions?
Click to expand...
Click to collapse
Well you could put it into HBOOT USB mode and try running the RUU again and see if there is any difference.
when i go for HBOOT USB mode i get
ERROR [120]: MAIN BATTERY POWER
This error message will appear when the Android phone’s battery power is not sufficient (Batter power should be more than 30%). Although RUU will instruct you to plug in the AC adapter, it will still need to make sure that your Android phone has enough power to complete the update. (The Android phone cannot charge the battery when it is connected to the PC while installing the RUU).
Click to expand...
Click to collapse
Try doing factory reset and then install RUU.
Amar-S said:
Try doing factory reset and then install RUU.
Click to expand...
Click to collapse
tried it but nothing happens
can i use this method?
http://forum.xda-developers.com/showpost.php?p=21046189&postcount=2
Can some one please provide me ROM.zip file only ?
The method is worth a shot.. the Rom.zip file will be here when u are running the RUU.. just copy/paste it on desktop in the process
c:/your user name/appdata/local/temp and search rom.zip
Click to expand...
Click to collapse
I had something like that before when I tried to go back to stock. Basically I flashed the RUU, got rid of cwm recovery and all that, and I ended up getting stuck on the HTC logo white screen, with it refusing to boot.
I ended up going back to cwmr and a custom ROM.
So maybe the best way for you to be able to use your phone would be to go and put a custom ROM on it. However mine was S-OFF so it was easy for me to flash recovery again, I've forgotten how to go S-OFF from S-ON but you should be able to do it without booting.
However I would also know how to go back to stock.
Yea you can use PG32IMG.ZIP method.
If still not , Unlock your bootloader and install a custom rom.
I will use this method once i get back home
run the ruu again in pc.. and extract the rom.zip from temp folder in pc.. it will be in c drive-your user name-appdata-local-temp and search rom.zip.. rename it to PG32IMG.ZIP make sure its not PG32IMG.ZIP.ZIP
Click to expand...
Click to collapse
Amar-S said:
Yea you can use PG32IMG.ZIP method.
If still not , Unlock your bootloader and install a custom rom.
Click to expand...
Click to collapse
if above mentioned method doesn't work how can i Unlock bootloader and install a custom ROM My cell hone is stuck on HTC logo
My device is H811 running 10N version (rooted), but I'm unable to update it using because it won't be detected once it goes into fastboot or download mode. I have tried many drivers, and different PCs (running different OS, Windows 10, 8.1, 7) but still can't get it to works. Is there something I'm missing?
zenkhas said:
My device is H811 running 10N version (rooted), but I'm unable to update it using because it won't be detected once it goes into fastboot or download mode. I have tried many drivers, and different PCs (running different OS, Windows 10, 8.1, 7) but still can't get it to works. Is there something I'm missing?
Click to expand...
Click to collapse
first of all. update what.??
raptorddd said:
first of all. update what.??
Click to expand...
Click to collapse
I want to update it to Marshmalllow 20i or later.
zenkhas said:
I want to update it to Marshmalllow 20i or later.
Click to expand...
Click to collapse
have you tried lgbridge..
i doesnt detect phone at all.?
you have both of this drivers http://www.mediafire.com/file/k6ozyesitcqbkdr/driverslg.zip
usb 2.0 ? if nothing else works .. i can only think of format pc.. install drivers.. have windows update on in case it doesnt find drivers.. wait for it to install all drivers first time you connect phone.. or maybe bad usb port in phone .??
raptorddd said:
have you tried lgbridge..
i doesnt detect phone at all.?
you have both of this drivers http://www.mediafire.com/file/k6ozyesitcqbkdr/driverslg.zip
usb 2.0 ? if nothing else works .. i can only think of format pc.. install drivers.. have windows update on in case it doesnt find drivers.. wait for it to install all drivers first time you connect phone.. or maybe bad usb port in phone .??
Click to expand...
Click to collapse
No it doesn't. LG Up detects it when phone is On, but when LG Up restarts the device in fastboot, it says no devices connected, even when drivers are installed. Yes, the USB port is 2.0, and it can't be problem with port of phone since it is detected in normal mode. I will try these drivers and let you know if it works. Thank you
zenkhas said:
No it doesn't. LG Up detects it when phone is On, but when LG Up restarts the device in fastboot, it says no devices connected, even when drivers are installed. Yes, the USB port is 2.0, and it can't be problem with port of phone since it is detected in normal mode. I will try these drivers and let you know if it works. Thank you
Click to expand...
Click to collapse
LGUP and fastboot.??? what you talking about.?
turn off phone. then press vol up and plug you usb cable. it should take you to download mode and open LGUP it takes a while for connection sbut less then a minute..
raptorddd said:
LGUP and fastboot.??? what you talking about.?
turn off phone. then press vol up and plug you usb cable. it should take you to download mode and open LGUP it takes a while for connection sbut less then a minute..
Click to expand...
Click to collapse
Okay, that's the problem actually. I was confused between fastboot and download mode. When I press volume up and connect the cable it boots into fastboot mode instead of download mode. What could be the problem?
BTW here is the log from fastboot mode:
usb_error();transaction failed.txn_status = -1
usb_read(); DONE. ERROR. len 64
SECURE BOOT: DISABLED
LOCK STATE: LOCKED
zenkhas said:
Okay, that's the problem actually. I was confused between fastboot and download mode. When I press volume up and connect the cable it boots into fastboot mode instead of download mode. What could be the problem?
BTW here is the log from fastboot mode:
usb_error();transaction failed.txn_status = -1
usb_read(); DONE. ERROR. len 64
SECURE BOOT: DISABLED
LOCK STATE: LOCKED
Click to expand...
Click to collapse
am not good at readings of finding error i just suggestion why i think it might be..
can you do a factory reset.? can you try again to go into download mode.. maybe use an app that has download mode recovery mode one click on phone to take you there.?
its weird .. something not right when vol up and connect usb.. doenload mode should pop up. with screen showing usb icon.
I had the same exact problem for 6 hrs yesterday and i came across your thread and the problem is when you do adb reboot bootloader, and your phone doesn't show up on your pc under 'Computer management > devices', the driver says unsupported, follow this video starting around 4:50, you'll find all the drivers that way and it'll work right away
nkia2sg said:
I had the same exact problem for 6 hrs yesterday and i came across your thread and the problem is when you do adb reboot bootloader, and your phone doesn't show up on your pc under 'Computer management > devices', the driver says unsupported, follow this video starting around 4:50, you'll find all the drivers that way and it'll work right away
Click to expand...
Click to collapse
What video?