Database Develop

[Q] E:Can't mount /dev/block/st110 ... my nightmare begin!

Hi! Here is the story of my nightmare... I have a Bell i9000m with Android 2.1. I have use GST tweaker tools to root it. I also have do a backup with titanium backup (but I think it useless at this step) After this I have try to change the battery icon with the same utility. When I have rebooted the phone, it stop at the "S" logo for a minute and after the screen go black and the button are glowing and the phone buzz. After this nothing happen. When I go in recovery mode (3e) I obtain an error:
update media, please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions,
copy default media content failed.
I have try with odin3 1.7 to flash the phone but I'm a little bit confused with all possibility...
One stupid thing I have to say, I don't know my original firmware version... ;-(
I have see many good custom kernel... it is possible to fix this and by the way to upgrade to froyo?
It is possible to fix my problem doc?
Thanks a lot for your help!
P.S. Sorry for my bad english, (i'm from Quebec,Canada)

Easiest fix :
Go in recovery and wipe.
Then restart and see if that fixed your problem.
Alternate (Guaranteed solution) :
Go here
Click "Direct Download". If you don't see it try to refresh the page.
Fire up odin.
Extract the zip u downloaded
For pda in odin select the .tar you extracted
Put your phone in download mode.
Flash w/o repartition or nething.
That should work.

Hi! I have try the 2 solutions you mention. But always same problem... I have to mention I have installed speedmod-kernel-k12p-500hz it is correct or I have to replace it?

Ok then do this :
Get these two
Flash odin with repartition and select the pda,modem,csc
Once done
Go back to odin. Flash just pda with no repartition or nething of the jl2 (previous thing u downloaded in my first post).

Sorry for this question but what do you mean by nething? (sorry english is not my first language!)

So leave everything the way it is.
Dont check mark anything extra.

YEAH! You solved my problem!!! You rock man!
Before I do any other stupid thing any advice?
I have visit some european site about android. They offer some firmware.. it is better to keep the "bell" specific firmware?,etc...
I don't know if I already say this ... Thanks you!

Try them.
Now u know
exactly how to restore if nething ever happens

thenamelessthing said:
YEAH! You solved my problem!!! You rock man!
Before I do any other stupid thing any advice?
I have visit some european site about android. They offer some firmware.. it is better to keep the "bell" specific firmware?,etc...
I don't know if I already say this ... Thanks you!
Click to expand...
Click to collapse
Glad to hear you got your problems sorted. Maybe you could hit the "Thanks" button under Daneshm's post.

Daneshm90 said:
So leave everything the way it is.
Dont check mark anything extra.
Click to expand...
Click to collapse
Thank you! You indirectly helped me immensely!

thenamelessthing said:
Hi! Here is the story of my nightmare... I have a Bell i9000m with Android 2.1. I have use GST tweaker tools to root it. I also have do a backup with titanium backup (but I think it useless at this step) After this I have try to change the battery icon with the same utility. When I have rebooted the phone, it stop at the "S" logo for a minute and after the screen go black and the button are glowing and the phone buzz. After this nothing happen. When I go in recovery mode (3e) I obtain an error:
update media, please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions,
copy default media content failed.
I have try with odin3 1.7 to flash the phone but I'm a little bit confused with all possibility...
One stupid thing I have to say, I don't know my original firmware version... ;-(
I have see many good custom kernel... it is possible to fix this and by the way to upgrade to froyo?
It is possible to fix my problem doc?
Thanks a lot for your help!
P.S. Sorry for my bad english, (i'm from Quebec,Canada)
Click to expand...
Click to collapse
this problem accure bcs of
1.you didnt remove bettry b4 flashing rom
2.some stoke filmware give you error message but if you flash with 521+pda+csc+modem file then tht problem is solve
and i found that I9000XWJM5 filmware is really good if somebody need it then pm me i all send zip file

Can anyone tell me how do bring back to life my phone??? I used this on my Vibrant and now my phone is DEAD!!! IT WON'T TURN ON AT ALL
ANY IDEAS??? PLEASE HELP!!! I KNOW I MADE A MISTAKE... ANYONE PLEASE

mobileoneexpress said:
Can anyone tell me how do bring back to life my phone??? I used this on my Vibrant and now my phone is DEAD!!! IT WON'T TURN ON AT ALL
ANY IDEAS??? PLEASE HELP!!! I KNOW I MADE A MISTAKE... ANYONE PLEASE
Click to expand...
Click to collapse
do u have download mode??
if not buy a JIG or send back to samsung

HELPPPP
azzledazzle said:
do u have download mode??
if not buy a JIG or send back to samsung
Click to expand...
Click to collapse
hi guys, i've follow this guide but my phone it's blocked from 15 minutes... any help please?

Daneshm90 said:
Ok then do this :
Get these two
Flash odin with repartition and select the pda,modem,csc
Once done
Go back to odin. Flash just pda with no repartition or nething of the jl2 (previous thing u downloaded in my first post).
Click to expand...
Click to collapse
.. ok. call me a n00b or w/e u want, but i understood everything up until that last part. when u go back to odin.
It would help if you can describe the set-up, because clearly i did something wrong... screenshots would help if possible /:
p.s. i have all the files downloaded from ur previous posts... i just need to know the order. also for the second download file, which file is the PDA file? the one with the word "CODE" in it? or i dont even apply that one .. ;;;

Hello, i've been having the same problem with my GT-i9003, and even after flashing with odin i still have the same problem. Well, it's not exactly the same, cause my phone will keep on a starting bucle if i try to start it without my EXTERNAL sd card (the one i bought), and if i start it with the external card in, it starts, but i can't use anything that uses the sd card (music, camera, 3g), so yes i can call and message and use wifi, but that's not how it's ment to be. Basically it's like i had no external or internal cards.
So everythime i try to flash without the external sd card, i get the mounting error, and if i flash with the external card, it seems ok , but i still can't use any of the things mentioned above.
I'm a bit lost, and i believe it's because i'm missing something (i'm new to this). i don't want to send it to samsung (yet)
i've been using the firmware that came with the phone, didn't try anything new.
to sum up: any attempts to flash with/without the external card are irrelevant, the problem persists.
Any thoughts/ideas/solutions?
thanks in advance.

[Q] Help!

Hy guys , sorry if there was another post like this , but i did not have the time to read all the posts . Until a few month ago , i had a friend that helped me to upgrade my firmware and now i can't ask him no more to help me out .
I have a 2.2 fw version , but i don't know exact what version it is , it is with froyo_doc_v7.6.2_jpa.xwjpa . That what it says in "about phone" . I would really like to upgrade my firmware because i am sure that a new one is up , and i can't do that in Samsung Keys because the present one is a custom one .
So , from the bottom of my heart i ask : Can you help me by explaining step by step what to do to upgrade to a new firmware that could be much better ?like ... stability and performance ? And not mess up my phone?
Thank you very much .
P.S. : Sorry for my bad english

doc's roms are very good and stable,
head over to www.romkitchen.org and make one there yourself (easy peasy)
considering you are on custom ROM i assume you will have 2e / CWM recovery, to boot into this you need to power off the phone, Hold volume up + Home button + power button all at the same time.
anyway download your ROM from the above link, place in on the root of your sd card, and boot into recovery, go to apply update from sd card > choose update from sd card > 'Your ROM name here' then select that and select YES,
your phone will do the rest

Ok , but how do i know which one is the newest from the list that it is provided to me over there? How do i know which one is the best? Is there a android 2.3 or something? or .. 2.4?

DjLittle said:
Ok , but how do i know which one is the newest from the list that it is provided to me over there? How do i know which one is the best? Is there a android 2.3 or something? or .. 2.4?
Click to expand...
Click to collapse
I really think you need to read at least the stickies and the FAQs before you go much further...if you can't work out that v11 is probably newer than v9, and are looking around for android 2.4, please educate yourself before you ask someone to hold your hand and walk you step by step through bricking your phone.
The order is supposed to be search, then read, then ask...not just ask because you can't be bothered to read anything.
Sent from my GT-I9000 using XDA Premium App

DjLittle said:
Ok , but how do i know which one is the newest from the list that it is provided to me over there? How do i know which one is the best? Is there a android 2.3 or something? or .. 2.4?
Click to expand...
Click to collapse
ok there are standard released firmwares available from samfirmware.com
as long as you can put your phone in download mode (Reboot holding the power, down volume and middle buttons at the same time) you should be able to use these with a program called odin3 (you want version 1.7).
These are all official stock firmware releases or early leaks of of new samsung firmware.
I do not believe there is an official release of a 2.3 firmware yet but there are some leaks and the SGS II is being released this coming week so I would guess official firmwares are either imminent or might even be available (they were then they werent again so I dont know for sure)
Stock firmwares are simple to install with odin as long as the custom rom you are does no have features like lag fixing enabled.
all you do is connect up your phone in the download mode mentioned above select the full firmware file by pressing the pda button and nabvigating to the file you got from samfirmware.com. make sure this is the only file checked. (no pit, no modem, no csc etc) make sure the only boxes checked are auto reboot and f:reset time
push start and wait about 5 minutes later you'll have a stock device.
if this goes wrong in anyway or you have lag fix or other stuff and you want to reset this first, download darkyy's ressurection rom do everything exactly the same as above only also select the pit file that comes with darkyys and also select repartition. get that working and then flash the stock rom as desicribed above.
I have had no issues when I have followed this procedure all my issues start when I deviate from this.

@ rschenck thank's but you have to understand that some of us work from early in the morning to the night , and i don't have the time to stay and read all the sticky posts and all the posts.
@ curioct : Thank you very much for the info . I will try to folow the steps .
But .. i don't know if i have lag fix . I think i do , and if i do omg , i have to instal darky's rom , and after that what?

DjLittle said:
@ rschenck thank's but you have to understand that some of us work from early in the morning to the night , and i don't have the time to stay and read all the sticky posts and all the posts.
Thats ok but your risk is vastly increased to damage your phone if you dont understand .
But .. i don't know if i have lag fix . I think i do , and if i do omg , i have to instal darky's rom , and after that what?
Dont install anything .
You have a custom rom undo any lagfix build a rom in rom kitchen and flash it .
http://forum.xda-developers.com/showthread.php?t=817703
http://romkitchen.org/sgs/?s=generator
TRY
rom XWJS8 wipe CSC to suit your location
Kernel Hardcore modem JPY
Apps themes tweaks etc you choose
half an hour to build and install .
jje
Click to expand...
Click to collapse

thank you
But i don't know how to undo lag fix

DjLittle said:
thank you
But i don't know how to undo lag fix
Click to expand...
Click to collapse
In the instructions that came with the lag fix .
Or we need to know what lagfix used .
jje

JJEgan said:
In the instructions that came with the lag fix .
Or we need to know what lagfix used .
jje
Click to expand...
Click to collapse
How do i find out what lag fix was used? What instructions are you talking about?

Lagfix unknown so how do you turn off ???
By reading the instructions that came with that model lagfix .Or finding what was used .
jje

ooook , big bubu ))
I installed the zip pack that was generated from romkitchen , and .... now it stays with the logo on . It dosen't do anything .
It is dead .Omg )
After the instalation was complete i rebooted the system . And now it writes on the screen GALAXY S bla bla ...(THE LOGO) and now it stays like this. It has been 20 minutes . and still like this . What do i have to do ?

Open up Kies, and hook your phone up to the PC. See if Kies will recognise your phone. If it does, format your internal sd card. Then disconnect the phone, drop the battery, put it back in and see if it will boot.

electrotune1200 said:
Open up Kies, and hook your phone up to the PC. See if Kies will recognise your phone. If it does, format your internal sd card. Then disconnect the phone, drop the battery, put it back in and see if it will boot.
Click to expand...
Click to collapse
Thank's , right now i am trying with odin a thing .. and it seems that it works ... for now ) . I wil see what will happen next.
I will tell you soon . I hope i am doing the right thing

Mission accomplished ! I've done it with odin . FW 2.3.3 . Now i have to read some posts where i can find some aplications and better launchers . Thank's a lot guys !

Do i need any lag fix?

2.3.3 probably not .
jje

[Q] [Help] My Mobile Dont Instal ROM

Hey Guys....
I've read a many post and i cant find a way to work on mine...So please anyone can help me?
So, i'll say what i was doing until this moment...
I installed a Custom Rom [i dont remember what version or others infos...sorry ] and this ROM have a lot bugs and i didnt like it...
So i try to instal "Gingerbread 2.3.6 5570B OFFICIAL" and when i run the ODIN, they "stuck" in 'download...' in this case shows "<1> mibib download.."
And i cant run the Recovery Mode! Just Down Mode and when i try to ON my phone they show a Icon or something like that and dont start the phone...
I dont know what to do...
So... Anyone can help me?
PS: Sorry for my English, isn't my native language...
-------------------------------------------------------------
@Edit
Well...
I realy dont know what i've done but the go back to life! *Praise to the lord!*
:lol:
If anyone have the same problems like i had here things i've done after they back to life again:
1 - Remove battery and Chip and SD Card. After that i press the 'download mode' buttons [vol down, power and home] and put the battery in phone.
2 - Open Odin and just clicked in 'Start' without any file selected.
3 - Close and Open again the Odin e put the files and click 'Start' and after that my phone come back to life!
So anyway...Bye

you got the wrong firmware, as far as i know
yagyagaire.blogspot.com
check out this blog for all this

dhruvbatra205 said:
you got the wrong firmware, as far as i know
yagyagaire.blogspot.com
check out this blog for all this
Click to expand...
Click to collapse
Thanks but the problem it's already solved...
But thanks anyway...
Cya

HELP phone briked

Hi there i have a SGS which was running ics on a custom rom working fine
I then wanted to flash the official 2.3.6 os back on it for a friend.
I put the phone into download mode then odin did'nt do anything so i turned it off
now i can't see anything on the phone when i turn on the power key please can i do anything?

Check your drivers on your labtop and retry to put the GS in download mode

Try going in recovery system and do all three wipes...
Sent from my SGH-T959 using Tapatalk 2

I can't do anything i cant go into download mode and i cant go in to recovery mode i cant do ****
Any button i press wont do anything to turn on my SGS
I don't even see any backlight
is this worrying

I guess u hard bricked ur phone then...
Now there is only one way..
G
Get a USB jig and with the help of it u can go in download mode.. U can check the video below
http://www.youtube.com/watch?v=1RoZU5ZPMS4&feature=youtube_gdata_player
Proud owner of SGS GTI-9000.

I've got a better solution and with it your phone will never be bricked in the future.
But you can use it only if you are handyman.
Follow this thread :
http://forum.xda-developers.com/showthread.php?t=1330491
and your phone will resurect and will be immortal ^^( manner of talk, if you drop it from the 51 floor of a building it will not survive).

Dustman317 said:
I've got a better solution and with it your phone will never be bricked in the future.
But you can use it only if you are handyman.
Follow this thread :
http://forum.xda-developers.com/showthread.php?t=1330491
and your phone will resurect and will be immortal ^^( manner of talk, if you drop it from the 51 floor of a building it will not survive).
Click to expand...
Click to collapse
lol i ll never try that...
u seriously doing it?? O.O
wish u luck though..

@drakester20 the utube video that you sent me went back to xda site and said it will only work if the bootloader is workin mine is'nt
and
that method you showed on disecting the phone might be my only option
just out of curiosity could i give it to samsung and will they detect that it has been rooted?
BTW i installed a I9100 flash file on to the odin when i did it which was samsung s2 flash file now i realise what went wrong
Me being a **** head and installing the wrong file.:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:

mizzeeboy said:
@drakester20 the utube video that you sent me went back to xda site and said it will only work if the bootloader is workin mine is'nt
and
that method you showed on disecting the phone might be my only option
just out of curiosity could i give it to samsung and will they detect that it has been rooted?
BTW i installed a I9100 flash file on to the odin when i did it which was samsung s2 flash file now i realise what went wrong
Me being a **** head and installing the wrong file.:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
ohhh... srry my bad..
I did the same mistake when i rooted my phone for the first time..
and i did gave it to samsung and they fixed it..
they chnged the motherboard..
they wont see ur binary resets i guess..
u can try that too better then ripping ur phone off...

i have made the same thing, need to do somethings.. its not hard.. just need a few minutes to find this instructions on the other forum... w8
brb
edit:
posted by franciscocpg in brasildroid.com
1-Remove battery, sim card and sd card
2-wait 3~4 minutes
3-put your charger on galaxy (i lost my charger, used the usb cable and worked)
4-Hold power, and at the same time (dont release power), put battery, press vol.down and home button (in this order)
5-keep holding the buttons for 5~10 seconds
your galaxy must be online again..
i'm sorry for my bad english, but i think its understandable ;p
its work for me and more 7,8 ppls who was the cel bricked...
i hope that work for you too.....
post here any results
this

drakester20 said:
lol i ll never try that...
u seriously doing it?? O.O
wish u luck though..
Click to expand...
Click to collapse
It's easy you just have to make a bridge between two connectors (OMX5 and OMX0) and after you flash a software. If this manipulation can make my phone like a survivor i can do it ^^
---------- Post added at 12:04 PM ---------- Previous post was at 11:58 AM ----------
Don't worry about that the GS2 has a counter who is incremented when u flash a non official software it's a trick that the constructor used to help the Samsung's technicians to know if you can use the guarantee or not but the GS1 isn't equipped of this system, then it doesn't matter.

so @drakester20 are u saying that i can give it samsung and they wont know and charge mer nothing?

mizzeeboy said:
so @drakester20 are u saying that i can give it samsung and they wont know and charge mer nothing?
Click to expand...
Click to collapse
yeah dude.. they wont know ur binary resets anyway.. if u had sgs2 then they could have figured it out in download mode coz there it is written in download mode..
u can give it a try though...

@drakester20 so what did u tell samsung when your phone got briked.
Just found found out that my phone still has warranty till the end of next moth.
What should I say to them?
Should i say i used samsung kies to update then a failure message came on my screen ?
What should i say as I am running out of time and my warranty is nearly about to go?

mizzeeboy said:
@drakester20 so what did u tell samsung when your phone got briked.
Just found found out that my phone still has warranty till the end of next moth.
What should I say to them?
Should i say i used samsung kies to update then a failure message came on my screen ?
What should i say as I am running out of time and my warranty is nearly about to go?
Click to expand...
Click to collapse
yeah say that u tried samsung kies update and due to power failure or something ur phone got messed up..
BTW i just gave them my rooted and bricked phone and they did it for free..
If my post helped, don't mind hitting THANKS

marlonmrn said:
i have made the same thing, need to do somethings.. its not hard.. just need a few minutes to find this instructions on the other forum... w8
brb
edit:
posted by franciscocpg in brasildroid.com
1-Remove battery, sim card and sd card
2-wait 3~4 minutes
3-put your charger on galaxy (i lost my charger, used the usb cable and worked)
4-Hold power, and at the same time (dont release power), put battery, press vol.down and home button (in this order)
5-keep holding the buttons for 5~10 seconds
your galaxy must be online again..
i'm sorry for my bad english, but i think its understandable ;p
its work for me and more 7,8 ppls who was the cel bricked...
i hope that work for you too.....
post here any results
this
Click to expand...
Click to collapse
That did not work for me at all

mizzeeboy said:
Hi there i have a SGS which was running ics on a custom rom working fine
I then wanted to flash the official 2.3.6 os back on it for a friend.
I put the phone into download mode then odin did'nt do anything so i turned it off
now i can't see anything on the phone when i turn on the power key please can i do anything?
Click to expand...
Click to collapse
Try this:
1.Must have:Java,Linux,Windows,MacOS
2.Download this : http://heimdall-one-click.googlecode.com/files/OneClick.jar
3. Run the file
Video how work this: http://www.youtube.com/watch?v=tEotRhChSE4&feature=player_embedded
3. Maybe solved this problem
***
one more solution:
http://forum.xda-developers.com/showthread.php?t=964106
and another one
And here more information an another version for you
http://forum.xda-developers.com/showthread.php?t=1330491
I hope some link or file help for you

dysan0201 said:
Try this:
1.Must have:Java,Linux,Windows,MacOS
2.Download this : http://heimdall-one-click.googlecode.com/files/OneClick.jar
3. Run the file
Video how work this: http://www.youtube.com/watch?v=tEotRhChSE4&feature=player_embedded
3. Maybe solved this problem
***
one more solution:
http://forum.xda-developers.com/showthread.php?t=964106
and another one
And here more information an another version for you
http://forum.xda-developers.com/showthread.php?t=1330491
I hope some link or file help for you
Click to expand...
Click to collapse
Thnaks for all that good advice but unfortunately what ever button i press on that phone will not work
And guess what my warranty has gone to even better
Who thinks i should replace my motherboard and it will work again?

mizzeeboy said:
Thnaks for all that good advice but unfortunately what ever button i press on that phone will not work
And guess what my warranty has gone to even better
Who thinks i should replace my motherboard and it will work again?
Click to expand...
Click to collapse
Yeah.. motherboard will do it.. but it is very expensive.. around 8000 RS. (Convert urself )
If my post helped, don't mind hitting THANKS

drakester20 said:
Yeah.. motherboard will do it.. but it is very expensive.. around 8000 RS. (Convert urself )
If my post helped, don't mind hitting THANKS
Click to expand...
Click to collapse
Yeah I might want to sell it but i've seen some motherboard Resurrections using riff box i wonder some one might quote me for that job?

[Q] is there any F/W update way???

i look that thread http://forum.xda-developers.com/showthread.php?t=1861854 but i seem so mixed for me i do not want to brick my lovely 04x
so is there an other way to update F/W . my F/W versiyon is 10c but i like to make it v10f
thanks from turkeyyyy

emre81tr said:
i look that thread http://forum.xda-developers.com/showthread.php?t=1861854 but i seem so mixed for me i do not want to brick my lovely 04x
so is there an other way to update F/W . my F/W versiyon is 10c but i like to make it v10f
thanks from turkeyyyy
Click to expand...
Click to collapse
Its very easy to flash the phone, the thread is a little confuse cause a lot of users have different problems and doubts.
The steps are easy.
Download the "kdz-update" folder from the link on that thread
Download the FW version that you want.
Install "msxml" (from the kdz-update folder)
Run and turn ON the "Windows Enabler" (from the kdz-upload folder)
Take out the battery
Press "Vol-" and while pressing connect phone to computer untill you see on the phone screen "FW update"
Run "UpTestEX_mod2_marwin". Settings:
"Select type">>>>>>>>>>>CDMA - SmartPhone(WM)
"Work Directory">>>>>>>> The kdz-upload folder where is better to put the kdz FW files inside
"Select model.dll">>>>>>>>Choose from the kdz-upload folder ther file "X3_2008_v0.0.6.9.dll" or "P880.dll", both of them work fine
"PhoneMode">>>>>>>>>>>EMERGENCY
"Select kdz file">>>>>>>>> Choose the V10x that you download
Click on "Start Upgrade"
The program will start with the kdz file extraction, after a few seconds you'll see on the log that it start to write on the phone, thats when you need to put back the battery on the phone.
Just need to wait about 3-5 minutes and its done :victory:
The other way is using the Official tool but latest FW for Turkey is V10C soo, its useless for you...

RuedasLocas said:
Its very easy to flash the phone, the thread is a little confuse cause a lot of users have different problems and doubts.
The steps are easy.
Download the "kdz-update" folder from the link on that thread
Download the FW version that you want.
Install "msxml" (from the kdz-update folder)
Run and turn ON the "Windows Enabler" (from the kdz-upload folder)
Take out the battery
Press "Vol-" and while pressing connect phone to computer untill you see on the phone screen "FW update"
Run "UpTestEX_mod2_marwin". Settings:
"Select type">>>>>>>>>>>CDMA - SmartPhone(WM)
"Work Directory">>>>>>>> The kdz-upload folder where is better to put the kdz FW files inside
"Select model.dll">>>>>>>>Choose from the kdz-upload folder ther file "X3_2008_v0.0.6.9.dll" or "P880.dll", both of them work fine
"PhoneMode">>>>>>>>>>>EMERGENCY
"Select kdz file">>>>>>>>> Choose the V10x that you download
Click on "Start Upgrade"
The program will start with the kdz file extraction, after a few seconds you'll see on the log that it start to write on the phone, thats when you need to put back the battery on the phone.
Just need to wait about 3-5 minutes and its done :victory:
The other way is using the Official tool but latest FW for Turkey is V10C soo, its useless for you...
Click to expand...
Click to collapse
İt seems simple now :thumbup: thanx i am at work now İ ll try when i go home
One more question if i update f/w v10f will it be turkish language or not i wrote that question in my other threat but no answer i ll try euro v10f.kdz version for my o4x
Thanx for ur help
Sent from my LG-P880 using xda premium

emre81tr said:
İt seems simple now :thumbup: thanx i am at work now İ ll try when i go home
One more question if i update f/w v10f will it be turkish language or not i wrote that question in my other threat but no answer i ll try euro v10f.kdz version for my o4x
Thanx for ur help
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
If you mean "Türkçe", yes

RuedasLocas said:
If you mean "Türkçe", yes
Click to expand...
Click to collapse
Yes i mean turkce thanx much i am on the way home i ll try it as soon as possible
Sent from my LG-P880 using xda premium

i did it now and its '' türkçe '' thanxx much again
but i have to root again its boring
and i checked some perfomence test its worst than my old s/w version and its warm little bit more
ill test it againe after root and deoxed
camera doesnot work also

ok i did root, deoxed ,and mod camv5 everytings is ok expect google play
its not working what u suggest me to do ???
any its working now i restart than try litlle bit more
thanx now waitingfor jb )))

emre81tr said:
ok i did root, deoxed ,and mod camv5 everytings is ok expect google play
its not working what u suggest me to do ???
any its working now i restart than try litlle bit more
thanx now waitingfor jb )))
Click to expand...
Click to collapse
Its recomended to perform a factory reset before upgrade.
After upgrade and root, factory reset again...
Its the best way to have "clean" installs.
Best way to fix it (by this order) downgrade, factory reset, upgrade, root, factory reset