Related
I wanna know How I update my froyo to gingerbread latest update. Please give me a working tutorial and Also I want to increase Camcorder fps which is only 15fps...!! The recording now is too bad Sp plz give me any overclocking methods to increase camcorder quality....
Serecomputing said:
I wanna know How I update my froyo to gingerbread latest update. Please give me a working tutorial and Also I want to increase Camcorder fps which is only 15fps...!! The recording now is too bad Sp plz give me any overclocking methods to increase camcorder quality....
Click to expand...
Click to collapse
if u want to upgrade to stock official 2.3 rom then download files from this link
http://www.mediafire.com/?3s9p8n18i27884g
download this rar file on ur pc .. unrar it then u will find a .nb0 file
jst copy this file to ur sd card using ur usb cable
dont put it in any folder it means putting on the root of sd card
when u done copying
remove data cable and then switch off your phone
now you have restart your phone in download mode now this is a tricky part
when ur phone is completly off and had vibrated like it does when shuting down you have to press volume up and volume down key both at the same time and keep them pressed
now while holding both of the volume keys together press the power on button and keep all these keys pressed until ur phone vibrates
now after that android written screen it will show an exclamation symbole underwhich there is a android standing here press the home button on the touch pad of this phone
now scroll down the menu by volume down button press it untill u reach 4th and might be last option which says "install .nb0 from sd card"
click on it by pressing Back key remember back key work as selection key in this mode
now it will ask u about yes or no
scroll down to yes and press back key
now in few minutes it will completly install and after installation it takes a little time to boot up
Facing this type of error... Please Help
Code:
Enter ITEM_NBP_SD_DOWNLOAD
Battery capacity is 51%
Please do not remove SD card and battery or it would cause unrecoverable damage to device!!
Enter launch_image_update
Fail to open SDCARD:firmware.nb0
Some error during preparing
The update package may be not correct or corrupted!
Please reboot to OS and try again or ask for technical support.
Serecomputing said:
Facing this type of error... Please Help
Code:
Enter ITEM_NBP_SD_DOWNLOAD
Battery capacity is 51%
Please do not remove SD card and battery or it would cause unrecoverable damage to device!!
Enter launch_image_update
Fail to open SDCARD:firmware.nb0
Some error during preparing
The update package may be not correct or corrupted!
Please reboot to OS and try again or ask for technical support.
Click to expand...
Click to collapse
May be incomplete / bad download. Redownload nb0 file.
If you find device id mismatch error then use SUT L software to install using PC.
Sent from my CSL-MI410 using XDA App
Nb0 file is correct bro.. I also faced this error earlier when tried to update my phone by different nb0 file which is for csl mi 410...!!!
ok if u are facing these issue then its time to go to download mode
go to this link and download latest sut (software update tool)
now unzip it and select the most suited version for ur window x86 x64 both are included
http://www.mediafire.com/?j14rg72ig2l19z2
when ur done install the software run it
and follow the attachments
when u are at the last moment of attachments its time to go to download mode
switch off ur phone
keep ur data cable ready
when phone is off press the volume up button remember only volume up button and keep it pressed and now press the power on button
it will now not vibrate or do not show that android symbol it will be a black screen showing something in white small fonts
now plug in the data cable and phone will be recognized by the software and also one drive named as fih will be shown
when phone is connected the next option will appear click on it and it will do all the work for you....
after all done phone will restart automatically and will be updated
"Make sure u make a back up of all contacts before doing it becoz i suggest for a clean installation though u can still go for upgrade insteed of fresh install"
ALWAYS CLICK THANKS IF POST IS USEFUL
PM me if u stuck at any step
ok dude I will try this method and reply soon....!!
ROM
i want MIUI ROM for my spice mi 410...
@ kshitij_bhatt
I have done updating my phone... Can u please tell me what are the new features I will get in my updated firmware..??
Also can u tell me how I overclocked my camera to increase its frame per second (FPS)...???
Serecomputing said:
@ kshitij_bhatt
I have done updating my phone... Can u please tell me what are the new features I will get in my updated firmware..??
Also can u tell me how I overclocked my camera to increase its frame per second (FPS)...???
Click to expand...
Click to collapse
ok after update in technical terms at 2.3 phone gets java 6 environmental build application support.. in easy terms... mostly all the apps are now supported
now u might notice that there are certain application installed with the update ,,, go here and read all about deleting them
http://forum.xda-developers.com/showthread.php?t=1266846
and also get root access to ur phone then only u can enjoy the capabilities of a android phone..
as i searched for increasing fps for camera i didn't succeeded till date bt as soon i came to know any code i will let u know
@kshtij After updating in gingerbread My phone becomes too slow dude.. Tell me How I downgrade back to froyo...
Serecomputing said:
@kshtij After updating in gingerbread My phone becomes too slow dude.. Tell me How I downgrade back to froyo...
Click to expand...
Click to collapse
now this isn't expected it was supposed to work fast.. ok does the problem accusing is this one
1. while lock the screen it takes quite long to lock and sound flicks
2. while turning on by pressing that lock button takes a way long to turn on screen
if these are the problems then u might go first to the good stock rom section and find another update file for 2.3.4 might mine is currpted for ur use it happens ...
first try this link http://forum.xda-developers.com/showthread.php?t=1299157
and if this one dosn't help then go for this thread and check for suitable stock rom
http://forum.xda-developers.com/showthread.php?t=1274063
bt first try the upper one and let us know if it really works .. give it a try plzz
^ Bro I update my phone using sutl 3 software by computer.. So Is there any way way to downgrade from the same software..??
Serecomputing said:
^ Bro I update my phone using sutl 3 software by computer.. So Is there any way way to downgrade from the same software..??
Click to expand...
Click to collapse
yes there is the way... u jst need that .nb0 for 2.2 i think someone had already posted it search around..
Unable to find 2.2 nb0 file... Searched full internet. U r my only hope.. SO plz dude give me the file :'(
Serecomputing said:
Unable to find 2.2 nb0 file... Searched full internet. U r my only hope.. SO plz dude give me the file :'(
Click to expand...
Click to collapse
ok i will upload it today for u ...
---------- Post added at 02:06 AM ---------- Previous post was at 01:45 AM ----------
Serecomputing said:
Unable to find 2.2 nb0 file... Searched full internet. U r my only hope.. SO plz dude give me the file :'(
Click to expand...
Click to collapse
ok i will upload it today for u ...
ok here is the 2.2 rom... it might not work or might have blotwares
http://www.mediafire.com/?7ollj3p9deotev9
i would suggest u if u want only stock roms.. then give a try to wellcom mobile 2.3.4 update of this phone a try
here is the link
http://www.mediafire.com/?je5hs0sno3b9lv7
Miracle boss...!! I found my phone as it was previous. R u using 3g in your phone...???
Serecomputing said:
Unable to find 2.2 nb0 file... Searched full internet. U r my only hope.. SO plz dude give me the file :'(
Click to expand...
Click to collapse
hi
here take it from below link it is 2.2 official India Rom
link : http://dl.dropbox.com/u/10031257/Mi410/Mi410 - FroYo_FB0-207O-0-5012-A01.rar
Thanks bro But I got from kshitij post....
Serecomputing said:
Thanks bro But I got from kshitij post....
Click to expand...
Click to collapse
i m now working to make the 2.3 rom blot free will upload it soon
also i m planning to get someone's help
hi!
Sorry bad english, but...
P920 rom compatible with P925g?
And work it, if a p920 cwm backup (2.3 gingerbread) recovered in p925 (2.2.2 froyo)?
too difficult the update in to 2.3 for me...
(after a Galaxy S)
thx answer!
p920 roms are compatible with p925. But you will have to flash a stock p920 baseband first. Thereafter you can put any rom of p920. :-D (Just flash with the lg support tool and it will do the baseband flashing too :-D )
Flashing guide is here
http://forum.xda-developers.com/showpost.php?p=22417769&postcount=1
(thanks to the dark lestat)
*v21E firmware is recommended !
You got be careful with recover thing. I have no idea about it.
Hit thanks if you value my reply.
Kasvinda said:
p920 roms are compatible with p925. But you will have to flash a stock p920 baseband first. Thereafter you can put any rom of p920. :-D (Just flash with the lg support tool and it will do the baseband flashing too :-D )
Flashing guide is here
http://forum.xda-developers.com/showpost.php?p=22417769&postcount=1
(thanks to the dark lestat)
*v21E firmware is recommended !
You got be careful with recover thing. I have no idea about it.
Hit thanks if you value my reply.
Click to expand...
Click to collapse
thx, but this v21e ROM where can I find?
wreedx said:
thx, but this v21e ROM where can I find?
Click to expand...
Click to collapse
Here you go!
V21E_00.kdz Download
thanks!
and last question:
what are improvements in the v21?
better battery life time?
more speed, better stability?
sorry for the question asked, this is the last
i using the stock 2.2.2 rogers rom: good stability, good battery, loud camera sound, english language...
which I would love: silent camera, longer battery life, good stability, hungarian language...of course
and optional 3g or 4g...
v21e is the gingerbread update which includes :
very good battery life
2D to 3D game converter
higher network speeds
some improvements in camera
plus more...!
Rogers upgrade
Do you know if this v21e is good and compatible with Rogers Canada LGP925g ?
PS: I Like to change my firmware I have a lot'S Ghost Call issue and missing text with V20c
KaNiMziE
yes its compatible. p925g is the same as p925 thrill. So no problem of installing v21e.
v21e is ghost call free...!
hit thanks..!
hi!
help please!
two problem found in flashing kdz (flashing guide):
1. b2c...setup.exe in "software" folder installing halt: check internet connection for update! restart or cancel
2. when i push (and hold) vol up+power button and plug the usb cable (without battery), flash omapxxxx...in the device manager, wait 5-10 sec and insert battery, the flashing in the device manager omapxxxx is off, and...no new com ports (but on the taskbar: new hardware found...etc...new comXX port installed, but complete device is not! (2 more components not installed.)
After the errors, i starting flashing the kdz...but the program message: not plug device in the usb...
sorry for bad english!
wreedx said:
hi!
help please!
two problem found in flashing kdz (flashing guide):
1. b2c...setup.exe in "software" folder installing halt: check internet connection for update! restart or cancel
2. when i push (and hold) vol up+power button and plug the usb cable (without battery), flash omapxxxx...in the device manager, wait 5-10 sec and insert battery, the flashing in the device manager omapxxxx is off, and...no new com ports (but on the taskbar: new hardware found...etc...new comXX port installed, but complete device is not! (2 more components not installed.)
After the errors, i starting flashing the kdz...but the program message: not plug device in the usb...
sorry for bad english!
Click to expand...
Click to collapse
You probably don't have all the drivers installed. Uninstall what you have, restart, and than install the drivers.
Or maybe you forgot to enable USB debugging
Sent from my P920 using xda premium
Markyzz said:
You probably don't have all the drivers installed. Uninstall what you have, restart, and than install the drivers.
Or maybe you forgot to enable USB debugging
Sent from my P920 using xda premium
Click to expand...
Click to collapse
I always turned on the usb debug mode...Some applications may require...(example: titanium backup)
if i turn on the phone, and plug in the pc, will appear in the lg com ports.
I think the phone does not start downloading mode...or something else is wrong.
i using the windows 7 ultimate x64, and this is the first phone, than which there are problems when upgrading ROM.
wreedx said:
hi!
help please!
two problem found in flashing kdz (flashing guide):
1. b2c...setup.exe in "software" folder installing halt: check internet connection for update! restart or cancel
2. when i push (and hold) vol up+power button and plug the usb cable (without battery), flash omapxxxx...in the device manager, wait 5-10 sec and insert battery, the flashing in the device manager omapxxxx is off, and...no new com ports (but on the taskbar: new hardware found...etc...new comXX port installed, but complete device is not! (2 more components not installed.)
After the errors, i starting flashing the kdz...but the program message: not plug device in the usb...
sorry for bad english!
Click to expand...
Click to collapse
Hey once i had the same issue as your with the b2c setup. :-D
Try to install the b2c app the very beginning of the process. It could probably be something you changed during the process. Changing port to 9002 or replacing the host file.
If you have already changed the above things, undo them.! Restart the pc and try again.
*at the beginning uninstall all the usb drivers + flashing software.
If you still can't solve the problem you may have to reinstall or repair your windows..! I know its frustrating but i had to do it to my friends pc to get over this issue.. :-(
Hit thanks if you value my reply :-D
Sorry, but not working for me this dark lestat's guide...and other guide...
However slightly different yes!
Own version is work:
1. install drivers
2. install b2c...and close (LG ikon on the tasbar)
3. install msxml.msi
4. plug in phone to pc in usb debugging mode (for drivers finishing installation...the phone is on, don't touch)
5. install shttp, setting http port to 9002, backup hosts file, and overwrite it in to MOD folder...
6. run windows enabler and turn on (on the taskbar)
7. run the UpTestEx...and follow dark lestat's guide...the kdz file flashing full automatic (no need boot into download mode, no need unplug the battery...)
8. full wipe
Running LG-920 Optimus 3D V21E on my At&t LG Thrill 4G LG-925 and it works excellent, No problems whatsoever, couldn't be more happy losing the bloatware.
Also if I may add I do receive HSPA speeds on my phone without any base band alterations whatsoever.
Kasvinda said:
p920 roms are compatible with p925. But you will have to flash a stock p920 baseband first...
Click to expand...
Click to collapse
Sorry to ressurect old thread...
I'm in Canada and just installed v20e and ThiaiZO3D ROM. My network connection goes like crazy - 3G, G and then I just loose it...
What do you mean by "flash stock p920 baseband"? How can I do it?
GetRIL tells me I have unknown bb....
Thanks!
Goldenmeadow said:
Sorry to ressurect old thread...
I'm in Canada and just installed v20e and ThiaiZO3D ROM. My network connection goes like crazy - 3G, G and then I just loose it...
What do you mean by "flash stock p920 baseband"? How can I do it?
GetRIL tells me I have unknown bb....
Thanks!
Click to expand...
Click to collapse
You need to change your baseband. You can follow either of these guides.
http://forum.xda-developers.com/showthread.php?t=1287236
http://forum.xda-developers.com/showthread.php?t=1491870
Sent from my LG-P925 using xda app-developers app
yourguitarist said:
You need to change your baseband. You can follow either of these guides.
http://forum.xda-developers.com/showthread.php?t=1287236
http://forum.xda-developers.com/showthread.php?t=1491870
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
Thanks!
But I followed first guide to switch from v20c to v21e and didn't see anything about basebands... Were they changed automatically with flashing whole kdz file?
Thanks in advance!
Goldenmeadow said:
Thanks!
But I followed first guide to switch from v20c to v21e and didn't see anything about basebands... Were they changed automatically with flashing whole kdz file?
Thanks in advance!
Click to expand...
Click to collapse
Yes sir. The kdz file includes the baseband.
Sent from my LG-P925 using xda app-developers app
? Which. Kdz file has just the p925 baseband? The v10e has both.
EDIT: Was able to flash the .fls to my phone to restore the P925 Froyo BB. Was able to do the .kdz a few nights ago and get my p925 bb back with v10e, but tried last night to flash back to froyo after trying a p920 BB and when I flashed the v10e BB the phone was still recognized as p920. This is the reason why I ask the above question.
Thanks in advance,
Kiltnar
Sent from my LG-P925 using xda app-developers app
Hi Xda members,
If your mobile has bricked. do the following step. and get back ur mobile back .
TUTORIAL:
Download the flashtool.Click here to download the flastool http://www.mediafire.com/download.php?uytbettmmeiuw2n
Download ROM Image X8_2.1.1 (2.1.1.C.0.0)_E15i.rar .Click here to download [URL="http://www.mediafire.com/download.php?t5jusp8gzwqth2z"]http://www.mediafire.com/download.php?t5jusp8gzwqth2z
(then extract)
Password :thanks
3.Place ftf file in /firmwares directory of your flashtool.
4. Install drivers from /drivers directory
5. Prepare yourself - plug the USB cable to the computer and launch flasher.
6. Click "flash", choose your ROM from the list, Wait for instructions.
7. When the instruction pops up, press and hold "back" button on your X8 and plug the cable into it. Keep holding untill you see that flashing of files has begun(LED GREEN APPEARS) , then you may release it.
8. Flashing will take a while, you may observe the progress on a bottom bar. When it's finished you will be asked to plug off your device and reboot it.
10. If you wish to change baseband, clean firmware directory in flashtool and place baseband ftf file in it, then go through flashing procedure again.
11. If you try this correctly your phone will work again
Dont ask the question again and again.......
:good:Credits go to MKA_Sharing and Binary......:good:
For more info See this thread http://forum.xda-developers.com/show....php?t=1755215
Thanks to Sidhart
If i helped you...Press thanks button.....
Hey, thanks a lot man, after bricking my phone several times and use ur guide to unbrick it. I manage to explore more bout new rom and kernel...
And why should anybody flash back to stock? If u soft brick ur phone u should just reflash the rom that ur using right now...
I guess this is only the solution for "SOFT" brick.
Does it can make phone error sometime? Or not easy to use like before? Thanks...
Sent from my X8 using xda app-developers app
No error..once you flashed your phone you can get ur old ROM android 2.1.
Easy to use.No bugs....!
If u r going to install any custom rom don't forgot to root and xrecovery....
I always preferred Companion, and you just connect, but if you're in trouble the Flashtools is a good choice :laugh:
Sorry for my bad english
Front-Line said:
I always preferred Companion, and you just connect, but if you're in trouble the Flashtools is a good choice :laugh:
Sorry for my bad english
Click to expand...
Click to collapse
Some times PC Suite Should not solve flashing..And it ll take more time...
Simple & Sweet. It worked
my x8 got brick...when i tried to repair/fix my phone using pcc...this happen :
when i tried to connect my x8 to cable it only show green light but pcc doesn't recognized my phone...even i follow the step....
please help me...
kaede hideki said:
my x8 got brick...when i tried to repair/fix my phone using pcc...this happen :
when i tried to connect my x8 to cable it only show green light but pcc doesn't recognized my phone...even i follow the step....
please help me...
Click to expand...
Click to collapse
Use flashtool to flash back to stock 2.1. It's the most reliable method for me.
Sent from my X8 using xda premium
You can't brick the x8.
Sent from my GT-I9100 using Tapatalk 2
no new links?
pipi14 said:
And why should anybody flash back to stock? If u soft brick ur phone u should just reflash the rom that ur using right now...
Click to expand...
Click to collapse
Bro, in a soft brick you can't enter to Recovery mode. That's why we use Flashtool.
---------- Post added at 09:25 AM ---------- Previous post was at 09:19 AM ----------
@aaronsuarez95
Here's the link for FTF file - http://hotfile.com/dl/128941602/d01b6c1/X8_E15i_2.1.1.C.0.0._un.ftf
Good work.
Hope this stops a new question thread.
Actually, the amount of guides meant all questions were annihilated.
EDIT: If some people can't understand this (kinda impossible because I thought it was great) then I have a guide here. It is broken down a bit more.
http://forum.xda-developers.com/showthread.php?t=1840124
nice thread dude..
Hope anyone can make thread with this title "How to Solve your HARD BRICK phone!!!"
BlackRabbit1703 said:
nice thread dude..
Hope anyone can make thread with this title "How to Solve your HARD BRICK phone!!!"
Click to expand...
Click to collapse
But it needs a jtag box
Sent from via internet
bandarigoda123 said:
But it needs a jtag box
Sent from via internet
Click to expand...
Click to collapse
:highfive:
Well, after a TON of work, and unsuccessful attempts at getting this, I finally was able to get signal and working data on my phone. I know some people had had trouble with the process, so I'm going to post my guide here to help you all out.
There are two parts to this tutorial. Only one is needed, however, to get ICS to properly work, so find the one that fits your current predicament AND ONLY USE THAT PART OF THE TUTORIAL.
If this is your first time installing the ICS rom...
Follow the LG flashing tool guide that XBSall has linked in his ICS Rom post. You can also find it at http://forum.xda-developers.com/showthread.php?t=1244490 . However, when you install the ROM, DO NOT USE THE .FLS FILE HE PROVIDES. Instead, download the v18A baseband and install that one with the .BIN file he provides. You can find the v18A baseband here- http://forum.xda-developers.com/showthread.php?t=1338383 I believe. After you flash the entire thing, you should have ICS! Easy!
If you have the ICS Rom installed now, but have no signal...
This is a bit more complicated, but still very easy. After I flashed ICS, I was not able to flash things using LGFlashTool like I could in GB. This is how I ended up flashing the baseband to fix my issues.
We need to set up your phone to connect with LGFlashTool first. To do this, use XBSall's restore to GB method, located at http://forum.xda-developers.com/showthread.php?t=1942836 . You will need the OMAP4BOOT files, but you will need nothing else.
Follow his tutorial up until step 6. When he tells you to insert the battery, insert it AS FAST as you can. I messed up on the timing the first few times. Once I saw a greyscale LG logo, and a few other times it just booted normally. Just try again if this happens. Eventually you will get the screenshot in step 9. DO NOT remove the cable when OMAP4BOOT tells you to, as well.
Follow step 10 and 11 of XBSalls restore tutorial, and then follow step 12. When you set up LGFlashTool for the reflashing, simply select the v18A baseband to flash and then start the process. If done correctly, Port 1 should state READY. Repeat steps 3-9 in his tutorial. It will start the flashing process. Once you get an error, close the program, and remove your phones battery and disconnect it from your computer.
Turn on your phone, and receive signal. PROFIT.
Hope this helps you guys out a bit, and remember to hit thanks if this helped you.
you beat me to it lol I was just about to post steps just like this
Sent from my LG-SU760 using xda premium
still no signal... ill try again... atleast closer to fixing... attached is the error im getting... when i go into About and check the baseband it still has V30
EDIT: When into System Settings > About Phone > Software Information ... it is showing the following information.
Baseband Version: XMM6260
Software Version: LGSU760-V30b-OCT-18-2012
Can anyone help? The guide dosent show you how to install the OMAP4430 drivers, but i found out myself how to do it so whatever. Problem is, now "OMAP4430 USB Device" is dissappearing and reappearing over and over again when i boot with volume up. Can anyone shed some light as to how to fix this?
And my phone isnt bricked, i can turn it on right now and everything.
EDIT: Found the problem, you need to hold VolUp after OMAP4430 pops up. Funny, it says in the guide to let go when it pops up. Fixed my mistake though.
llsektorll said:
still no signal... ill try again... atleast closer to fixing... attached is the error im getting... when i go into About and check the baseband it still has V30
EDIT: When into System Settings > About Phone > Software Information ... it is showing the following information.
Baseband Version: XMM6260
Software Version: LGSU760-V30b-OCT-18-2012
Click to expand...
Click to collapse
I have the same thing on my phone. Maybe try to reflash the v18A baseband again?
u can use V20A or V21B basebands also they work too
Sent from my LG-SU760 using xda app-developers app
llsektorll said:
still no signal... ill try again... atleast closer to fixing... attached is the error im getting... when i go into About and check the baseband it still has V30
EDIT: When into System Settings > About Phone > Software Information ... it is showing the following information.
Baseband Version: XMM6260
Software Version: LGSU760-V30b-OCT-18-2012
Click to expand...
Click to collapse
OH MY GOSH. NOW THAT I HAVE ACCESS TO YOUR SCREENSHOT, I NOTICED YOU HAVE THE THING THAT HAD ME STUMPED FOR HOURS.
Follow the second part of my tutorial to the T. If it still doesn't work, maybe I'll make a video or we can go on Teamviewer and I'll try to help you out.
BG64 said:
OH MY GOSH. NOW THAT I HAVE ACCESS TO YOUR SCREENSHOT, I NOTICED YOU HAVE THE THING THAT HAD ME STUMPED FOR HOURS.
Follow the second part of my tutorial to the T. If it still doesn't work, maybe I'll make a video or we can go on Teamviewer and I'll try to help you out.
Click to expand...
Click to collapse
I tried everything to detail and it doens't work. PM me when you are available to teamview. I will be here till 1am -6GMT (CST)
PM me when you are ready to go I'll be here.
not able to keep OMAP 44xx device connected
Hello everyone,
I'm currently trying to get ICS installer on my rogers P925. I tried many times on two computers (both windows 7 one is 32bits other is 62bits) to flash the bin and fls files you are recommanding but it seems like even if my OMAP 4430 device driver is correctly installed via the program files texas instuments dll it seems it wont stay connected at all and just pop open and closed sometimes when it seems to want, and it makes the flashing procedure impossible to me any ideas?
b.charles.gagne said:
Hello everyone,
I'm currently trying to get ICS installer on my rogers P925. I tried many times on two computers (both windows 7 one is 32bits other is 62bits) to flash the bin and fls files you are recommanding but it seems like even if my OMAP 4430 device driver is correctly installed via the program files texas instuments dll it seems it wont stay connected at all and just pop open and closed sometimes when it seems to want, and it makes the flashing procedure impossible to me any ideas?
Click to expand...
Click to collapse
Although mine hasn't worked in flashing properly I might be ables to get your drivers to connect properly so that LGflasher starts flashing. PM me your teamviewer ID and PW
BG64 said:
Well, after a TON of work, and unsuccessful attempts at getting this, I finally was able to get signal and working data on my phone. I know some people had had trouble with the process, so I'm going to post my guide here to help you all out.
There are two parts to this tutorial. Only one is needed, however, to get ICS to properly work, so find the one that fits your current predicament AND ONLY USE THAT PART OF THE TUTORIAL.
If this is your first time installing the ICS rom...
Follow the LG flashing tool guide that XBSall has linked in his ICS Rom post. You can also find it at http://forum.xda-developers.com/showthread.php?t=1244490 . However, when you install the ROM, DO NOT USE THE .FLS FILE HE PROVIDES. Instead, download the v18A baseband and install that one with the .BIN file he provides. You can find the v18A baseband here- http://forum.xda-developers.com/showthread.php?t=1338383 I believe. After you flash the entire thing, you should have ICS! Easy!
If you have the ICS Rom installed now, but have no signal...
This is a bit more complicated, but still very easy. After I flashed ICS, I was not able to flash things using LGFlashTool like I could in GB. This is how I ended up flashing the baseband to fix my issues.
We need to set up your phone to connect with LGFlashTool first. To do this, use XBSall's restore to GB method, located at http://forum.xda-developers.com/showthread.php?t=1942836 . You will need the OMAP4BOOT files, but you will need nothing else.
Follow his tutorial up until step 6. When he tells you to insert the battery, insert it AS FAST as you can. I messed up on the timing the first few times. Once I saw a greyscale LG logo, and a few other times it just booted normally. Just try again if this happens. Eventually you will get the screenshot in step 9. DO NOT remove the cable when OMAP4BOOT tells you to, as well.
Follow step 10 and 11 of XBSalls restore tutorial, and then follow step 12. When you set up LGFlashTool for the reflashing, simply select the v18A baseband to flash and then start the process. If done correctly, Port 1 should state READY. Repeat steps 3-9 in his tutorial. It will start the flashing process. Once you get an error, close the program, and remove your phones battery and disconnect it from your computer.
Turn on your phone, and receive signal. PROFIT.
Hope this helps you guys out a bit, and remember to hit thanks if this helped you.
Click to expand...
Click to collapse
XBSALL helped me out! It's finally working now! My problem was with the port. He got my phone rooted, changed USB port (I mistakenly was changing the wrong one), installed TWRP, put his ICS cleaned mod version on through TWRP zip install. It's all working now full bars of 3G!
help?
Finally got to flash ICS on phone but it was giving me errors everytime I wasn't using original baseband associated with .bin file. Now, I can't get it to boot in fastboot even using OMAP4boot I don't really understand when I need to insert fast the battery... OMAP4boot doesn't seem to get my phone...
You will always get errors as these are not full kdz files. If you are stuck at lg logo..try pull batt replace then hold vol- and power button til you see a factory reset screen do reset and boot..that made mine boot.
Sent from my LG-P925 using xda premium
Bdadd34 said:
You will always get errors as these are not full kdz files. If you are stuck at lg logo..try pull batt replace then hold vol- and power button til you see a factory reset screen do reset and boot..that made mine boot.
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
Sorry, maybe I wasn't clear enough, but my phone boots now, it's only I had to flash it with the O3D fls file and not the .fls I was supposed to use so I get a working ICS without any network.
Now that i'm trying to complete step 2 to get te right baseband, i can't get the phone to boot in download mode even using OMAP fasboot flash. the software just don't say anything appart from "waiting for phone".
So I was wondering if I was doing anything wrong
b.charles.gagne said:
Sorry, maybe I wasn't clear enough, but my phone boots now, it's only I had to flash it with the O3D fls file and not the .fls I was supposed to use so I get a working ICS without any network.
Now that i'm trying to complete step 2 to get te right baseband, i can't get the phone to boot in download mode even using OMAP fasboot flash. the software just don't say anything appart from "waiting for phone".
So I was wondering if I was doing anything wrong
Click to expand...
Click to collapse
Try the resurrection guide by xbsall it finally worked for me after I did everything I was supposed to I kept missing simple steps
Sent from my LG-SU760 using xda app-developers app
wayno140 said:
Try the resurrection guide by xbsall it finally worked for me after I did everything I was supposed to I kept missing simple steps
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Finally download mode is quite simple to acess (discovered on my own searching for a recovery)
1- power, vol+ , 3d button pressed
2- on lg logo release power
3- after 2 seconds approx release 3d button
4- wait for the korean page indicating LG SERVICE and a phone
you should be in it!!
now i'm getting a curious RAM writing error while using this mode on lg flash tool
b.charles.gagne said:
Finally download mode is quite simple to acess (discovered on my own searching for a recovery)
1- power, vol+ , 3d button pressed
2- on lg logo release power
3- after 2 seconds approx release 3d button
4- wait for the korean page indicating LG SERVICE and a phone
you should be in it!!
now i'm getting a curious RAM writing error while using this mode on lg flash tool
Click to expand...
Click to collapse
You need to do it this way http://forum.xda-developers.com/showthread.php?p=32945961 and only the way read the whole first 2 pages and do everything xbsall is a genius as are the people that worked with him to come up with the guide
Sent from my LG-SU760 using xda app-developers app
wayno140 said:
You need to do it this way http://forum.xda-developers.com/showthread.php?p=32945961 and only the way read the whole first 2 pages and do everything xbsall is a genius as are the people that worked with him to come up with the guide
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
it's almost the 10th time I follow the guide step by step by step... I think or i'm always doing wrong something or it's something else with my phone... I may have misconfigured one port but i do NEVER NEVER at all in the process see OMAP4430 device in my device manager.. so the little windows tool is not doing anything... maybe if someone wanna teamviewer they can see for themselves what it gives.
Wahoo, ICS + network
finally found that there was the correct driver for my computer in the omap4boot folder and not in everyother one I was installing, flashed with the guide after i found this driver and everything works fine
only thing i'm struggling is to set apns to get 3G any tricks?
Do a Google search for AT&T 4G APN (or whoever our carrier is). You can also create an APN with the word "phone" in the first two blanks, name and APN (I think), and it should give you access to 3G and HSPA. I hit 6.7mbps on Speed Test.
Sent from my LG-SU760 using xda app-developers app
So is it possible to install the US firm on a Canada firm? i just cant wait for 5.0 for canada
been a while since i stop modding my z1 and now im back..
anyone?
arcsuser said:
anyone?
Click to expand...
Click to collapse
As far as the model number is same, yes
for example u are using c6903, flash a ftf for c6903 but dont flash a c6906 one
KWOKSFUNG said:
As far as the model number is same, yes
for example u are using c6903, flash a ftf for c6903 but dont flash a c6906 one
Click to expand...
Click to collapse
ok i found one in xperifirm but theres 2 .242 and .157, which one?
arcsuser said:
ok i found one in xperifirm but theres 2 .242 and .157, which one?
Click to expand...
Click to collapse
242 lollipop
157 kitkat
Your choice... :thumbup:
kathanpatel1001 said:
242 lollipop
157 kitkat
Your choice... :thumbup:
Click to expand...
Click to collapse
i wonder if ill brick my phone if i flash the wrong one or if i make a mistake? lol
arcsuser said:
i wonder if ill brick my phone if i flash the wrong one or if i make a mistake? lol
Click to expand...
Click to collapse
Its easy download either firmware via xperifirm select a folder let it do its thing
After this you will get multiple files in selected folder
Now download flash tool just google it
Install it if first time then you need java and drivers installed whole tutorial is available just a click away from you..
Now once installed flashtool and drivers,, open flash tool -> tools-> bundles-> create
Now select your folder
Double click on device and select your device
Give your branding, use any like simple 'US' it doesn't matter
Select every file from left box to right box one by one and then click create.. :thumbup:
Congratulations you have just created your own ftf
Now click lightning button in flash tool select flashmode->ok->select your ftf -> flash
Wait for dialogue box to appear with a phone picture
Turn off your phone then wait few minutes now hold volume down button and plug in usb cable and quickly realese it once dialogue box with phone picture disappears
Wait and let it do its thing and done... :beer:
Or if you are just lazy enough then download ftf for us region for your phone's model number and follow above instructions from lightning button part... :thumbup:
kathanpatel1001 said:
Its easy download either firmware via xperifirm select a folder let it do its thing
After this you will get multiple files in selected folder
Now download flash tool just google it
Install it if first time then you need java and drivers installed whole tutorial is available just a click away from you..
Now once installed flashtool and drivers,, open flash tool -> tools-> bundles-> create
Now select your folder
Double click on device and select your device
Give your branding, use any like simple 'US' it doesn't matter
Select every file from left box to right box one by one and then click create.. :thumbup:
Congratulations you have just created your own ftf
Now click lightning button in flash tool select flashmode->ok->select your ftf -> flash
Wait for dialogue box to appear with a phone picture
Turn off your phone then wait few minutes now hold volume down button and plug in usb cable and quickly realese it once dialogue box with phone picture disappears
Wait and let it do its thing and done... :beer:
Or if you are just lazy enough then download ftf for us region for your phone's model number and follow above instructions from lightning button part... :thumbup:
Click to expand...
Click to collapse
so my first flash had error 995 but still in flashmode so i just reconnect the usb then i got a finished the second try and now im stuck at loading screen those purple waving pattern.. cant do anything.. what to do now?
NVM, it just took a while i thought im stuck lol...
arcsuser said:
so my first flash had error 995 but still in flashmode so i just reconnect the usb then i got a finished the second try and now im stuck at loading screen those purple waving pattern.. cant do anything.. what to do now?
NVM, it just took a while i thought im stuck lol...
Click to expand...
Click to collapse
Awesome
kathanpatel1001 said:
Awesome
Click to expand...
Click to collapse
thanks for the help bro
arcsuser said:
thanks for the help bro
Click to expand...
Click to collapse
This https://youtu.be/R0y13qfuCvU was installed on c6903 c6906 and C6943 and everything is working