[Q] Weird problem - Captivate Q&A, Help & Troubleshooting

Running rooted stock KJ3 with Samurai Kernel 1.0
I have no idea what caused this but all of a sudden the ONLY way I can get into download mode is with a jig, no button combos work, the volume buttons with usb plug doesn't work (only turns the phone on). And weirder still if the phone is off, plugging in the charger turns the phone on.
Anybody know what caused this?
Should I reflash bootloaders?
Any ideas would be appreciated...

im having about the same problem right now but the bigger issue with me is that my computer doesn't recognise the phone it keeps saying unknown usb device. im converting back to rfs now to change roms back to ki2 and see if it is still doing it. ill report back if i can find anything out.
---------- Post added at 07:28 AM ---------- Previous post was at 06:46 AM ----------
well i cwm back to ki2 and im still having that problem but i really think that im having usb issues with the phone. the phone doesn't recognise when i plug the usb from the computer it only thinks it is charging.

1. horrible tread title, next time give some clue as to what your problem is IN the title.
2.do the recovery button combos work? reflashing the boots may work just remember as with all flashes that include bootloaders there is a risk of hard bricking the phone if something goes awry.
kschumake83: go to settings> application>>usb settings and toggle mass storage (if its on it already switch to something else and switch back.) then go to development thats right above usb settings and retoggle usb bedugging back on.
you also may have a driver issue and a reinstall of them might help.
and finally, i oncwe ran over my usb cable with my office chair, it would still charge but the data connection was broken and could only be used to charge. so it might be your cable.

studacris said:
1. horrible tread title, next time give some clue as to what your problem is IN the title.
2.do the recovery button combos work? reflashing the boots may work just remember as with all flashes that include bootloaders there is a risk of hard bricking the phone if something goes awry.
kschumake83: go to settings> application>>usb settings and toggle mass storage (if its on it already switch to something else and switch back.) then go to development thats right above usb settings and retoggle usb bedugging back on.
you also may have a driver issue and a reinstall of them might help.
and finally, i oncwe ran over my usb cable with my office chair, it would still charge but the data connection was broken and could only be used to charge. so it might be your cable.
Click to expand...
Click to collapse
1) bedugging???
2) If it is a bad cable, DO NOT try to flash bootloaders.

Oic we're doing the typo dance this morning lol.
But right the bootloader reflash advice was directed just at the op, because yeah bad cable + bootloader flash = very bad day.

Yeah, end up sending phone out for Unbrickable Mod or JTAG.

My apologies for the horrible "tread" title ;-)
recovery button combo does work...
I also have problems with computer or Odin recognizing the phone. I reinstalled drivers (no change), then I tried reinstalling kies and it would recognize phone and work through one Odin flash but not through a second...so the process becomes: reinstall kies, flash rom, reinstall kies, flash custom kernel...
Any ideas?

studacris said:
1. horrible tread title, next time give some clue as to what your problem is IN the title.
2.do the recovery button combos work? reflashing the boots may work just remember as with all flashes that include bootloaders there is a risk of hard bricking the phone if something goes awry.
kschumake83: go to settings> application>>usb settings and toggle mass storage (if its on it already switch to something else and switch back.) then go to development thats right above usb settings and retoggle usb bedugging back on.
you also may have a driver issue and a reinstall of them might help.
and finally, i oncwe ran over my usb cable with my office chair, it would still charge but the data connection was broken and could only be used to charge. so it might be your cable.
Click to expand...
Click to collapse
Im almost positive its my port on my phone because my wifes captivated connects perfectly and i tried toggleing the usb settings too.
Sent from my SAMSUNG-SGH-I897 using xda premium

Are you on captivate bootloaders?
Edit.. I assume you are because you said stock kj3.. Perhaps you have a short inside the usb slot on your phone.. Maybe take a look in there and see if there is any debris
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

Related

Captivate dead? Boot to blank black screen

Need some help trying to figure out how to make my Captivate turn on...I press power and get the AT&T slash screen and then the galaxy s logo loads for about 3 minutes and goes to blank dark screen with the capacitive buttons lit. this is not good because my **** won't boot into recovery either
You should flash to stock then...pull battery, hold volume buttons and plug in usb with odin loaded and ready on the computer. There's plenty of threads to help you out
Sent from my phone so excuse the spelling errors
Funnily enough... My phone just did that too. I was installing Mort Widget and it just totally bricked...
I'm rather p!ssed at this...
Course this was after it deleted all my email accounts and SMS.
What you'll need.
Odin (search or look in any of the ROM/Firmware threads, for example the i9000 ROM or unofficial JH2 or JH3 ROM)
Your USB cable.
The firmware files.
Steps:
Remove battery, SIM card and micro SD card.
Open Odin on the computer.
Put the battery back in.
Plug in the USB cable to the phone.
Hold both volume up and down.
With VOL up/down held in, plug usb cable to the computer.
Your phone will show the beloved DOWNLOADING yellow image.
Odin:
Simply select the rom/firmware you want to flash to and enjoy.
I can confirm this will not overwrite the phone's internal 16gb storage, which is where most apps save backups to.
Future steps:
Before trying anything crazy, copy the entire phone internal 16gb storage to your computer. If you brick, you can always get a new captivate, copy the junk back and run a restore.
I recommend Titanium backup (donate the $6, the backup/restore is SUPER SUPER fast) along with Clockwork recovery. Clockwork's Nandroid makes full kernel backups and you can boot to recovery from the phone itself. No more adb reboot download or adb reboot recovery.
sorry for my english i have a 19000m the one from bell my phone boot with the GALAXY S LOGO WITH THE MUSIC BUT AFTER THAT BLACK SCREEN CAN I REPAIR THAT ?
Yes, odin is about your only hope here... Even if you boot into the bios and try to do a factory reset it will come up with error after error...
Reflashing will totally wipe and start fresh.
I am curious however. I think i isolated where my problem came from but I am still curious...
Did you try to sideload anything?
It happened to me twice with Bell's Vibrant version. The first time, just after one week after getting it (not rooted). They simply gave me a brand new one.
The second one took 3 week to go dead. Knowing my way around Linux Embedded systems, this time I investigated the issue. In recovery mode, there were error messages saying that the system could not fine the internal flash memory partitions. I could confirm from the kernel messages that partitions on internal sdcard had disappeared. I did factory reset, reflash original stock firmware with Odin, but it did nothing.
I Sent the phone back for repair and three weeks later, they gave me another one (probably refurbished!!).
My phone just turns on, with a black screen and the capacitive buttons lit up. Nothing else happens. When I try to go into download mode, it only goes back to this black screen. I does however detect that the phone is connected driver wise on the computer, but does not show up in Hemidall or Odin. I've tried just about everything
i used ODIN to resotore the phont to stock
but when it finsh...i get black screen
and the phone dose not work or do anything.
any help plzzz
isa.ahmed said:
i used ODIN to resotore the phont to stock
but when it finsh...i get black screen
and the phone dose not work or do anything.
any help plzzz
Click to expand...
Click to collapse
Does it light up or display anything and then go black, or does it just do nothing? If it does nothing, you're probably bricked, but try this anyway just in case your phone still has some life in it:
open Odin; press and hold both volume buttons and plug in your USB. If Odin lights up yellow, flash.
If that doesn't work, buy or build a jig, use it, and see if it goes into download mode. If it doesn't, plug the cable in anyway and see if Odin recognizes it. If it does, flash.
If that doesn't work, you're probably bricked. JTAG or Unbrickable Mod are your options from here, neither of which I personally know anything about but you can search around and find someone who can help you.
Hard Bricked= No signs of life, black screen no matter what, no response to USB plug in. Nothing but Unbrickable mod or JTAG will fix, I WOULD SUGGEST getting Unbrickable because you only have to get it once, and it cost the same as JTAG.
Soft Bricked= DL mode access is available(by jig or button combo and usb), recovery too, has some life in it. Can use ODIN/HEIMDALL to fix it.
when the flashing finsh and say done...and show the green light in the ODIN. the phone did not start up
dose this mean it break or dead charger?
as m not shure if the battery is full or not.
anyway i can pass the battery by over it with cuted USB cable?
isa.ahmed said:
when the flashing finsh and say done...and show the green light in the ODIN. the phone did not start up
dose this mean it break or dead charger?
as m not shure if the battery is full or not.
anyway i can pass the battery by over it with cuted USB cable?
Click to expand...
Click to collapse
If you got a green light, I would think it should at least turn on. However, if it was a successful flash, it should charge with the phone off. A bricked phone and a bad charger would both look the same: dead.
Try a different charger or battery if you think your battery could that dead. However if your battery died during your flash, that could also be the cause of your brick.
i charge the battery...and nothing happend
will the USB JAG solve it?
as i read in some post this will not
i need to send to some one to do it by opeing the phont it self
isa.ahmed said:
i charge the battery...and nothing happend
will the USB JAG solve it?
as i read in some post this will not
i need to send to some one to do it by opeing the phont it self
Click to expand...
Click to collapse
A jig is worth trying, but I suspect it will not solve your issue. You are correct, you need to send it to someone to have it fixed. Send a PM to AdamOutler or Connexion2005 and they can point you in the right direction.
what a crapy phone
i had Moto Defy and i never face same issue
so now am end with usellss phone..and need to theough away
what a waist of mony
isa.ahmed said:
what a crapy phone
i had Moto Defy and i never face same issue
so now am end with usellss phone..and need to theough away
what a waist of mony
Click to expand...
Click to collapse
You moto defy never flashed boot loaders since Motorola always had them locked down, and if you didn't know what you were doing flashing the stock Emma's that had boot loaders then it is not the phones fault. You should never really have to flash boot loaders and that is the ONLY risky part in flashing on these phones. Other than that Samsung cappys are almost TRUELY unbrickable (HARD BRICK) unless you mess up flashing boot loaders. WHICH YOU DID WHETHER YOU KNEW IT OR NOT BY FLASHING THE STOCK ODIN. SEND IT FOR UNBRICKABLE MOD, it is cheap repair and you WONT run into your same mistake ever again.
Sent from My KickAss CM7 Captivate
so no way i can do it here?
need to send it?to who i send? and who to trust?
i found some one will do for 50$
http://www.mobiletechvideos.com/blog/?page_id=776
Adam Outler
Sent from my SGH-I897 using xda premium
and other issue, i never toch the bootloader of it
i only re flash the OS of it only..and end with black screen.
this gay he will do what?
can the agent do it?
as it will be easer than to send it
can i have link of who will do it

Reboots when Usb connected

Flashed today my GT-I9000 to TO froyo I897UCJI6. I know i should not have done that now. But i really got pissed today at the gps of my phone and when i saw and update for galaxy s i just went for it, haven't checked the phone variant version. Thing is now my phone has no gps whatsoever it boots up fine but, sound only shows when i plug my headphones, accelerometer dont work correctly and so on....
So i though i`ll flash it back to stock. But the thing is once i connect the usb cable the phone just reboots and stays dead until the usb is disconnected.
I read the other threads but found no similar issues.
Here is a brief video of my problem
-http-://-www-.youtube.-com/-watch?v=MtcCvfCbAFk-
Remove all "-"
since i can`t post links
Anyone has any ideas how to get me back to stock?
Thanks!!
Damn i can`t even charge it!
Kinda weird indeed, try to remove the battery, wait a little, insert the battery and go to download mode (volume - / home / power) then start odin, put all files needed, and connect the usb, if it doesnt reboot hit start...
you got to enable adb debugging on your phone then open a command window and type: adb reboot download connect the usb to the phone and hit the enter key for the adb command before your phone fall asleep, then you are in download mode an can flash any rom with odin.
hope this helps, i flashed the same wrong firmware from the Vibrant.
Thanks Franklin, i tried the battery trick to no luck.
This is i cannot put my phone back to download mode because my "HOME" button is not mapped to do anything, seems like the "RETURN ARROW" button does the fuction when the system is loaded.
Any other ways to flash it back? Sd card or something?
Thanks for replies ;]
please try it my way it worked for me and i think it will work for you
I open the cmd navigate to c:\androidsdk\tools\ type in adb reboot download hit enter, it mounts daemon tools i plug in usb cable and 3 seconds later the phone goes blank and it stays unresponsive(no 3 key combination, not even the power button can turn it back on) i unplug the usb cable and the phone automaticaly shows the AT&T logo and starts up. The same happens when i plug my charger in!. Does that mean my SGS usb port is fried or something? Is there another way to flash my pnoe back to stock ROM?
I am so sorry i tried to make it better :[
Any clues?
no this is NOT a defective phone, its the result of the ROM and the 3 Button combo can´t work oh and you dont really mean deamon tools? and you musst plug the usb cable in the phone right before you hit enter or it can´t work!
I did that too. Like i said the phone turns it self off once the usb cable is attached.
Here is a brief video of my problem
-http-://-www-.youtube.-com/-watch?v=MtcCvfCbAFk-
remove all "-" from url.
dainiuxxx, this thread belongs in the Q&A section, not in development. Take a moment and read the "STOP, READ THIS BEFORE POSTING" thread at the top of both of these sections, it has clear guidelines for proper thread placement.
Sorry for that sirphukee.
Any help? Anyone?
Anyone that can help?
have you tried plugging it into another PC or Laptop?
Yup tried amothe laptop, reboot.
Wall charger, reboot.
So i`m kinda out of options?
yes, return it to the store, to get an exchange
a normal working SGS does not reboot when plugged into any USB port/charger
it's Shorted (damaged) for some reason
ok, return sounds good to me, but what will i have to say when they`ll switch on the phone and see the AT&T logo?
I`m in UK and my network is Orange UK.
Will they accept it back with no problems, i kinda doubt that....
uhh... you are in quite a pickle ...
try to remove the evidence, intentionally use a Update.zip ROM flash to kill the flash
or flash it to stock if you find a good ROM via Update.zip
use the WiFi to download the Update.zip ROM flash to the root of the internal SD to flash it.
ROM Manager can get the same results, you can WiFi install it from Market
AllGamer said:
uhh... you are in quite a pickle ...
try to remove the evidence, intentionally use a Update.zip ROM flash to kill the flash
or flash it to stock if you find a good ROM via Update.zip
use the WiFi to download the Update.zip ROM flash to the root of the internal SD to flash it.
ROM Manager can get the same results, you can WiFi install it from Market
Click to expand...
Click to collapse
Installed ROM manager from market, but seems it needs the phone rooted, right?
And rooting can be done only via usb cable, right?
Where do i find a Update.zip ROM via Wifi? and what are the procedures when i do find it?
OK,
so obviously the question now is HOW DO I F...k up my phone completely so no one could see what was done to it. When i`ll take it back to the shop.
dainiuxxx said:
Installed ROM manager from market, but seems it needs the phone rooted, right?
And rooting can be done only via usb cable, right?
Where do i find a Update.zip ROM via Wifi? and what are the procedures when i do find it?
Click to expand...
Click to collapse
you can ROOT the phone within the phone itself
by downloading Ryzaa One click lag fix from the market
instead of installing the lag fix, select the option to ROOT the phone
Same issue here. Amazing how easy it is to mess this phone up when you are really stupid. Oh well....
Tried the one click lag fix to root it, but cannot find a way to get into download or recovery mode. Tried every button combo I have seen suggested, but either gets stuck in a loop on the AT&T screen or just boots into the OS.
At the moment I feel my only option if we cannot find a way to get into download mode is to format the internal SD card and send it back to o2 (my provider), tell them it fried when Kies tried to do an update, cross my fingers and hope they send me a new one.

[Q] Just bricked my phone...

I was flashing EZ base and not paying attention (see attachedfile).
Now my SGS doesnt even respond to the power button! Is there ANYTHING I can do??
Please help
Plug the phone into the usb port then switch on phone. Does the pc detect a device?
i think i know you mate?
I recently soft bricked my phone and couldn't get into download mode the normal way.
What worked was holding the vol down button and the home button in (not the power button) and then plugging it into USB while holding them in. The USB power basically takes the role of pressing the power button.
I hope it works, good luck!
sorry mate but i just cant figure out how you could be so clumsy... so many times it is stated that you must be very careful with odin....
that is not helping, is there anything that can be done in the situation?
mab71 said:
sorry mate but i just cant figure out how you could be so clumsy... so many times it is stated that you must be very careful with odin....
Click to expand...
Click to collapse
Sorry mate, I just can't figure out why you would post a such a useless unhelpful reply. I flash my phone on a regular basis with CM7/MIUI, mistakes can happen!
To everyone else, thanks, I got it working.... no idea but I read some bricked threads and tried out something... took the battery out, kept hammering the power button whilst putting the battery in with vol down and managed to get into DL mode.
Phew!
Hope you have your efs folder backed up. The SGS is hard to brick and one of the phones that can be unbricked easily. The only problem is with the efs (the files inside the efs folder stores your product code and the imei number.)
Just wanted to bring this to your notice if you haven't done it yet.
just bricked a samsung gt-i9000. Hopefully I can get help to recover. I made several mistakes or false assumptions.
1. I could never get the phone to boot into recovery or download mode by itself. (this is my wife's phone -uh oh - as my phone I had no problem doing this). But I installed adb sdk and could reboot it into recover or download that way, so went ahead with flash.
2. I was using an older perhaps guide to flashing MIUI which had different file names that no longer seem to exist but double checked a few places and got current version numbers on MIUI and cm7 kernel and etc., but I used a newer version of ODIN 1.82 instead of the 1.7. Thought that wouldn't matter but in my bricking searches found that it may be an issue.
So now I have the icon of ..phone ! computer... and no way of getting into download mode as adb can't see the device. Hopefully there is a way - I've tried the suggestions above but they aren't working. I hope as last resort I can make the jig I've seen mentioned.. but any other methods?
/jd
[edit] these two phones were purchased at the same time and have same firmwares. I did back up efs from my phone, and in this process of flashing wife's phone had uploaded the galaxy_efs_backup file but didn't get a chance for it to work. If efs is borked, can I use the one from my phone or are they unique to each device? (assuming I can unbrick). [/edit]
hunky-d said:
just bricked a samsung gt-i9000. Hopefully I can get help to recover. I made several mistakes or false assumptions.
1. I could never get the phone to boot into recovery or download mode by itself. (this is my wife's phone -uh oh - as my phone I had no problem doing this). But I installed adb sdk and could reboot it into recover or download that way, so went ahead with flash.
2. I was using an older perhaps guide to flashing MIUI which had different file names that no longer seem to exist but double checked a few places and got current version numbers on MIUI and cm7 kernel and etc., but I used a newer version of ODIN 1.82 instead of the 1.7. Thought that wouldn't matter but in my bricking searches found that it may be an issue.
So now I have the icon of ..phone ! computer... and no way of getting into download mode as adb can't see the device. Hopefully there is a way - I've tried the suggestions above but they aren't working. I hope as last resort I can make the jig I've seen mentioned.. but any other methods?
/jd
Click to expand...
Click to collapse
i got the semi brick icon once
i pressed vol down, home, then power and held them together until the phone booted once, then once more, then once more (I kept holding them for about 40 seconds I guess). Then took the battery out for a minute, then while holding all 3 buttons together, put it back in (this is tricky, you need to practice or have someone else to help you) and did another 40 second loops. Finally took the battery out, put it back in and tried download mode and it worked.
But I could get download mode before I bricked it...
thanks allotrios,
Gave it a valiant try and no luck. I'm going to have to figure out the jig I guess - I can't figure out how they plug in those largish looking usb jigs into that tiny proprietary (looking) usb port on the i9000. Videos say a cheap micro usb cable but I think i may have to cut into my SGS charging/usb cable. But doesn't look like the cables on videos/pics.
hunky-d said:
thanks allotrios,
Gave it a valiant try and no luck. I'm going to have to figure out the jig I guess - I can't figure out how they plug in those largish looking usb jigs into that tiny proprietary (looking) usb port on the i9000. Videos say a cheap micro usb cable but I think i may have to cut into my SGS charging/usb cable. But doesn't look like the cables on videos/pics.
Click to expand...
Click to collapse
Hang on, one more thing you can try, worked for me just last weekend....
"Leave Odin Open. Then Plug the USB. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes release the Power Button. It will get to the download mode"
Worked like a charm, got it from this thread
http://forum.xda-developers.com/showthread.php?p=13630631#post13630631
If it works for you make sure you hit the thanks button of the guy that originally posted it
If you really need a JIG try this http://www.sparkfun.com/products/10031 with one of these http://parts.digikey.com/1/parts/764289-res-301k-ohm-1-4w-1-metal-film-mfr-25fbf-301k.html
Taken from 1st post in this thread
http://forum.xda-developers.com/showthread.php?t=819551
Gave it a go and no luck. I was wondering if Odin v1.82 was a problem so dl'd and used Odin v1.3 (says GT-P1000 on the title bar of it) but didn't seem to matter. Tried both versions.
I had Odin running, plugged in the phone which brought up the "brick" icons, then held down the 3 buttons until it rebooted (black screen came on) and released power, still holding other two buttons. Nothing - just the icons of death. I'm very rural so have parts coming for a jig - might have them by Monday evening or mid-week. Lucky that the phone was really slow and buggy (build XXJP2) so wife didn't like it at all. She wants an iphone so was hoping to spiff this one up to curtail that move. /jd
[edit] My research says that some of these phones have a bad secondary bootloader that prevents the 3-button technique. Not sure if that is inclusive of all these methods mentioned in this thread - that they simply won't work on a phone with the bad bootloader or whether these methods have sometimes overcome that limitation. But I've found a few links to fix it if I can get the phone back from the dead..
My phone is rooted, how can find efs folder and can I save a backup my computer hard drive?
I do odin flashing, in case something goes wrong.
chablo12 said:
My phone is rooted, how can find efs folder and can I save a backup my computer hard drive?
I do odin flashing, in case something goes wrong.
Click to expand...
Click to collapse
hey dude just download root explorer then open it u will find the efs folder in it
presss the efs folder for a second then there will be a popup in that u will find copy
just copy it and paste it in ur sd card
then connect ur phone to pc then u will find that efs folder
then just copy it to ur pc
Just a note to add data points on the bricking from my situation.
I read somewhere that a guy got his phone in download mode by plugging it into a bluetooth headset without it plugged into the charger. He figured it had built in resistance to help detect which device it was being plugged into and voila! he got download mode. (People in that thread asked which headset and he hadn't replied at that point so I don't know which).
I misread that at first to read a guy plugged the phone into his charger so I tried it (3 button combo and variations) and of course didn't work. But I was sitting there thinking about something else holding down the buttons and all of a sudden got it into download mode. The computers wouldn't recognize it though. So no luck - figured I had a jig coming so no biggy. Pulled the battery and tried again and it worked. This time I got into a download mode that the computer recognized.
So I flashed a kernel and got a "higher level" brick - got to first boot screen with words - but it just sat there vibrating. So tried a JVH single tar file an then got a boot loop up through the boot animations and noise. So am progressing - think I will try getting back to stock Froyo from samfirmware.com and see what goes from there. /jd

[Q] please someone anyone HELP my samsung captivate is soft bricked

ok to start with I am soft bricked cause i got the phone-!-computer on my screen. here is how it got bricked to start with... was updating to android 2.3 gingerbread with kies mini and the first time when finished updating my wifi would not work so i flashed the rom with odin and it was a bad version cause instantly it went to recovery mode. so I went and downloaded odin one click and flashed it back to stock android eclair and went to update to 2.2 froyo with kies mini our power blinked and now im softbricked.
ok here is what ive tried so far... 3 button combo both volumes and power tried all that. ok next i tried one click unbrick it just say failed everytime... tried AIO captivate toolbox and no avail.. went radio shack got 3 resistors 100k made a jig touched pins 4 and 5 and didnt work either.. so my questions are as follows
1. what next????
2. could i have possibly shorted out my usb port on my phone since i accidently slipped and touched a pin i should not have and AIO captivate toolbox says usb debugging isnt on.
3. is there any way to test the micro usb port on the phone to see if its working right?
any and all help would be very much appreciated.
thanks...
You're actually in an ok place. That phone--/!\--computer screen will function like download mode most times. Just try your Odin file again and you should be fine.
odin isnt recognizing it. is there a way i can make it recognize it?
I just went through this and got my phone working so no need to panic. Odin wouldnt see my phone but heimdall does. Search for the kb2 heimdall one click package and see if that helps. Since you flashed back to 2.2 youll need to use kb2. If you are on GB i897 bootloaders youll need the kk4 heimdall one click package
garydv2002 said:
odin isnt recognizing it. is there a way i can make it recognize it?
Click to expand...
Click to collapse
Try different ports, if nothing else. Look in the "Captivate Connection Issues" post in my signature for more items.
Also, you will probably want to stop using the AIO Toolbox. That particular piece of software is a little risky, as it flashes a known dangerous bootloader setup.
I found myself in the same boat. 3-button combo won't work, you have to remove battery and usb cable. Replace battery. Plug usb cable into the motherboard directly(rear), hold volume + and volume - then plug the usb cable into your phone. hold volume buttons until your phone boots into download mode. (assuming you have proper drivers installed)
didnt work
tried both heimdels kk2 and kk4 they both say looking for device. and also tried plugging my usb cord into every usb port on my computer still nothing.
Did your drivers unseat? for some odd reason i had to reinstall the drivers to get mine out of soft brick.
drivers
would that be the drivers for the program or the phone? and also on the kk2 and kk4 they download as jar files just like oneclick unbrick did so do i need to unzip them and move the jar file to where the exe folder is then right click and run as administrator or can i just run the jar file i downloaded?
also the the zadig driver program that comes with heindel programs will not see my phone at all when plugged in any usb port but my wife has a captivate also and when i plugged hers in zadig can see it as samsung usb composite device....
garydv2002 said:
odin isnt recognizing it. is there a way i can make it recognize it?
Click to expand...
Click to collapse
Pull battery, pull cable. With phone off, replace battery. Then press volume up only, and power. When screen loads, plug your USB in. If you get the system files screen, press the menu key. Then try Oden. This is what I had to do to get it to work.
Gingerbread through mini kies sucks. Your better off getting Gingerbread here:
http://forum.xda-developers.com/showthread.php?t=1300843
didnt work either
tried the just the volume up and power and plugged in usb still stuck in brick mode...
didnt work
the volume up and power then plug usb didnt work still in brick mode. should i try the usb jig with the phone off or on? when i touch pins 4 and 5 with the jig and the phone off the screen will come on but still computer- ! - phone no download mode
got it
finally got into download mode with the jig and alot of wiggling cussing fussing griping and finally praying lol.... thanks to all of you for your help not many strangers will help people anymore so thanks guys for your time i really appreciate it greatly
HELP
I have the Phone...!... computer screen ive done ever battery pull method oden cant "see" it but my computer says that a unidentifiable USB is plugged in. any advice?
cappy flasher said:
I have the Phone...!... computer screen ive done ever battery pull method oden cant "see" it but my computer says that a unidentifiable USB is plugged in. any advice?
Click to expand...
Click to collapse
Unistall your phone's drivers, restart pc and reinstall them.
Drivers
So i dont know what the drivers are I had a friend set this all up for me. also i think if odin id updated that might work. It was current at the time but when a few months pass its time to update!
---------- Post added at 03:53 AM ---------- Previous post was at 03:46 AM ----------
BWolf56 said:
Unistall your phone's drivers, restart pc and reinstall them.
Click to expand...
Click to collapse
so i just updated odin and i still got nothing. so what are the drivers? ill try that.
if you dont even know what drivers are in windows, and have other people set things up for you, you should not be flashing your phone in the first place.
any time you buy a device and hook it up to windows you install??? drivers.
Google: "drivers"... a piece of software that tells an operating system how to use a device.
but it is doubtful reinstalling your drivers will help
what version of odin are you using? what are you trying to flash now? what were you flashing when it messed up?
im sorry but this may end up being an expensive lesson not to do things you dont understand. you may have to send your phone away to be jtagged or unbricked.
I still have the phone...!...computer screen so i should be able to flash it back to stock. and even though i didn't add the drivers I know what im doing so don't assume Im a noob at this. and for your information I own 6 Samsung captivates and I work for Mobile Tech Videos so I flash these phone a lot I flash at least twice a day. so Jtaging it will be rather inexpensive but I would like to figure this out so I don't have to spend my time shipping this phone out. I notice that a lot of people have the same trouble as I am having so if I figure out how to solve the worst soft brick (witch I now have) it will be great for A post that covers everything with this screen. I got my phone this way by the USB port falling out during flashing so I'm lucky to even have this screen. I was at gingerbread 2.3.5 stock flashing to ice cream sandwich. I tryed using the USB jig but it failed so all I need to know is what the driver names are so i can try what was recommended. I also think ADB might help solve the problem some how some way. I just got the most recent Odin I was using 1.3 now im using 1.85
Not to be mean or start something, but if you work for mobile tech videos and you don't know what drivers are or you say you flash phones multiple times a day, then you should have a GREAT idea of what to do to fix this problem. Did you flash an ICS ROM and it bootlooped on the first flash, well that is supposed to happen. And Since you were on 2.3.5 then there is no DL mode combo problem. I don't know what to tell you. use your resources and Google it, or better yet let me Google that for you...
cappy flasher said:
I still have the phone...!...computer screen so i should be able to flash it back to stock. and even though i didn't add the drivers I know what im doing so don't assume Im a noob at this. and for your information I own 6 Samsung captivates and I work for Mobile Tech Videos so I flash these phone a lot I flash at least twice a day. so Jtaging it will be rather inexpensive but I would like to figure this out so I don't have to spend my time shipping this phone out. I notice that a lot of people have the same trouble as I am having so if I figure out how to solve the worst soft brick (witch I now have) it will be great for A post that covers everything with this screen. I got my phone this way by the USB port falling out during flashing so I'm lucky to even have this screen. I was at gingerbread 2.3.5 stock flashing to ice cream sandwich. I tryed using the USB jig but it failed so all I need to know is what the driver names are so i can try what was recommended. I also think ADB might help solve the problem some how some way. I just got the most recent Odin I was using 1.3 now im using 1.85
Click to expand...
Click to collapse
Heimdall flash!
Sent from my SAMSUNG-SGH-I897 using XDA

Bet this can't be fixed

No firmware and USB problem
I have a large problem, my wifes galaxy s won't go by the first screen (says GALAXY S GT-I9000)
So i thought i'd fix it using odin using the 3 button combo. But that isn't working anymore.
Luckily i have a usb jig which gets me to the download mode ...... but !
When i connect the pc cable (tried 2 OE samsung ones) i get device not recognized so i can't use odin to fix it.
What can i do, or do i have to send it to a repair centre to be resurrected ?
I have searched and searched but not found any topics with the same issues i have on her phone.
Need a bit more info i.e were you flashing the phone??if so which rom?
Then phone was playing up so i flashed darkys 10.4.2.
However the usb connection wouldn't work so i flashed it to standard JVT
using mobile odin.
Then i rooted it and went to go into recovery mode and it wouldn't turn on.
I tried to help the gentleman , but no luck . From what he told me , phone turns on after battery insertion , and It is not recognised by usb => so odin not usable .
If you can get to download mode but the phone isn't recognized by your computer then i'd say it's a driver issue. Install your phone's drivers again. To do that, just installing kies is enough BUT be sure to open task manager in windows and kill any process that has kies in it's name before opening odin.
If that still isn't flying i'd try using different USB ports and even with a different computer.
Extra advice:
- try not to flash bootloaders for now. That means picking a rom that has no bootloaders included but matches your phone's current bootloader. If you were using gingerbread flash a gingerbread rom, if you were using froyo, flash a froyo rom.
phone not starting up past first screen (GALAXY S GT-I9000 in white on black screen), phone not recognized neither by pc nor laptop ( usb drivers installed ) , phone turns on after battery insertion without pressing anything.
This manual is from a German board
Take the battery out, then hold the 3 keys combo for download and put the battery back on. Now you should start the download mode.
If not, then try it with a jig.
Good luck!
GOT A JIG. WORKS FINE.
But pc wont recognize it !!
Have you double checked that you have the right drivers installed? I know you have to use the Nexus S drivers for CM9, not sure about Darky's ROM.
Drivers
Download drivers 64 bit | 32 bit from here and install.
It is NOT the drivers as my other galaxy s connects fine every time.
Drivers have been removed and installed repeatedly.
I would suggest a different computer, maybe a different cable. I have this same issue with my infuse, hope you get this resolved.
Sent from my Desire HD using XDA App
Already tried that as well
You could try Adam outler's unbrickable mod.
Pasted from other thread:
I just wrote a wall of text b4 and my browser crashed GG
Well, here we go again, i will only tell what I did/the process
I did a nandroidbackup, then i wiped all data (data+cache+dalvik), installed CyanogenMod 9 (Build 16), it rebooted automaticly, so I entered recovery again, installed Google Apps from there, wiped data and cache (no dalvik), rebooted.
Ended up looping at the Samsung screen (not animation), and I couldnt do the 3-button-combo, so the NANDroid backup is useless.
I can enter the download thing, but i dont even know what it does.
Tried plugging it in the charger (after letting it dry out during the night), and only the loop thing appears. Cant do anything.
I see that theres something called odin (Since my download thing is working (VolDown+Home+Power) if its that you mean.
If its possible to fix my phones state, please tell me how, since I startedrooting, flashing and stuff yesterday (Gotta start at some point) and followed HDTechVideos tut (On his website)
woolf clubs said:
You could try Adam outler's unbrickable mod.
Click to expand...
Click to collapse
I have nowhere near enough ability for that. Pity though.
Your problem is most likely the USB port. Maybe cleaning it might help. It happened to me for a few months then when I got the S2 I stopped using it. Began to use it as my home 3g wifi modem and kept it on charge the whole time. A few weeks later tried connecting it to the computer and it worked first go. Ever since it has worked perferctly. I suspect the problem possibly started by a rain drop getting into the port.
Mind you, even when it wasn't being recognised by the PC, I would constantly connect, remove, reconnect, reboot PC and phone etc and it would sometimes get recognised. Other times it wouldn't connect but Odin still recognised it.
Sounds silly but try leaving it on charge as I did and maybe, just maybe you'll be lucky like I was.
Sent from my GT-I9100T
Well as of today it is away to the O2 repair centre.
Its under warranty (unless the find out it was rooted etc) so fingers crossed.
Well had a text back today to say my phone has been despatched, so here is hoping that its fixed.
It came back from the repair centre yesterday with a note saying a part had been replaced,
no costs for me, yippeeeeeeee.

Categories

Resources