Related
Samsung Galaxy Tab USB Debugging not working right
Not Able Connect P1000 to PC with USB Debugging ON
Connects prefect without USB Debugging active, Move files backs and forwards no problems, Need Some Sorter extra drivers or Something.
Can't use Z4root or SuperOneClick until I sort it out
Neither work at present
Same On two P1000s, SuperOneClick worked on one but that was just got lucky after trying 25 times, other one couldn't get lucky tried all sorts of ideas I could think of, need some fresh ideas.
Any Ideas?
Well,
U need to have Usb debugging turned on. Then u also need working drivers. U can find the drivers in the restockpackage on the overcome site.
Remember u can also just use adbwireless and connect via localip!
I have a Bell SGS. I updated it once from 2.1 to 2.2...now I'd like to update to 2.3.
My computer/Kies will NOT see my phone. I've done some searching, but I literally have no idea what I'm doing. I've done a factory reset on my phone hoping that would help...it didn't. I've re-installed Kies...no dice. Tried re-installing the drivers via Kies...nothing.
Any suggestions would be appreciated. Someone willing to help me step by step via e-mail would be even better.
60+ views and not a single suggestion?
I don't understand why my PC can't see my phone AT ALL.
Honestly, your best bet is to use Odin and flash the Bell UGKG3 (2.3.3) build.
You can download Odin and the Bell UGKG3 build here:
http://forum.xda-developers.com/showthread.php?t=1102881&page=1
Search for i9000m (that's what the Bell SGS is) and you'll find the UGKG3 download.
Instructions for using Odin are also on that same page.
Last time my phone was not recognized it was a broken USB cable
If your update from 2.1 to 2.2 was an unofficial update, keis will not see the phone again, unless you flash back to the official 2.1.
Once you have done that, Keis should then recognise your phone and offer you the latest Bell update.
Hope that this helps.
Geryatrix said:
If your update from 2.1 to 2.2 was an unofficial update, keis will not see the phone again, unless you flash back to the official 2.1.
Once you have done that, Keis should then recognise your phone and offer you the latest Bell update.
Hope that this helps.
Click to expand...
Click to collapse
My update from 2.1 from 2.2 was done through Kies.
Black Rose said:
Honestly, your best bet is to use Odin and flash the Bell UGKG3 (2.3.3) build.
You can download Odin and the Bell UGKG3 build here:
http://forum.xda-developers.com/showthread.php?t=1102881&page=1
Search for i9000m (that's what the Bell SGS is) and you'll find the UGKG3 download.
Instructions for using Odin are also on that same page.
Click to expand...
Click to collapse
Okay, I downloaded Odin 1.85. I found and downloaded the KG3 files, then extracted them. I got Odin all setup, put my phone in to download mode, connected it to the PC...Odin never detects the device.
TheAshaman said:
Last time my phone was not recognized it was a broken USB cable
Click to expand...
Click to collapse
After doing the above, I tried a different USB cable in a different port.
Any other suggestions guys?
First, test to make sure the usb cable works, ie, see if you can connect in mass storage mode.
Secondly, reinstall kies so that the usb drivers are installed properly.
disclaimernotice said:
First, test to make sure the usb cable works, ie, see if you can connect in mass storage mode.
Secondly, reinstall kies so that the usb drivers are installed properly.
Click to expand...
Click to collapse
As per my first post, I can NOT get my PC to see my phone.
I just tried plugging it in to another computer here at work. I'm using TW launcher, USB Setting = Ask on Connection...no dice. When I plugged in the cable, I chose mass storage, and the MTP starts...it says that it's connected to the computer...but the computer doesn't see it. Both computers are running XP.
first make sure that you have USB DEBUGING in settings/applications/development
if this will not help
-unplug phone from usb
-uninstall kies, reboot pc
-REDOWNLOAD kies and install it
-once again now make sure you do not have USB DEBUGING ticked in settings/applications/development
-make sure you have your pc setup to download drivers if neded from windows update servers
-connect phone to pc and let it install all divers it will ask for
-make sure your phone is setup to have "Samsung Kies" in settings/comunication/usb settings
-disconnect phone
-open kies and let it update (sometimes downloaded from www version of kies aint latest)
-you can and maybe should download usb drivers for samsung phones from this thread and install them
[Driver] [31.10.2011] SAMSUNG USB Drivers for Mobile Phones +LATEST UPDATED VERSION+
when everything is setted up, instlled, up to date and kies is loaded
connect your phone
and now saay what is exaactly happening after you followed those points exaact and you connect phone
---------- Post added at 07:52 PM ---------- Previous post was at 07:49 PM ----------
is there any sound from PHONE when connecting usb?
is there any sound from PC when connecting usb?
what is happening on statusbat when you connect usb?
what is happening at kies window when you connect the phone ?
what is happening at phone display when you connect the phone ?
What is kies? ^^
-unplug phone from usb
-uninstall kies, reboot pc
-REDOWNLOAD kies and install it
-once again now make sure you do not have USB DEBUGING ticked in settings/applications/development
-make sure you have your pc setup to download drivers if neded from windows update servers
-connect phone to pc and let it install all divers it will ask for
-make sure your phone is setup to have "Samsung Kies" in settings/comunication/usb settings
-disconnect phone
-open kies and let it update (sometimes downloaded from www version of kies aint latest)
Click to expand...
Click to collapse
I've done most of this a few times. The bolded section I'm not sure how to check. I've downloaded the drivers a couple times too...but am not sure I'm installing them 100% correctly.
is there any sound from PHONE when connecting usb?
No, but I have my phone set to silent...ALWAYS. It DOES vibrate though to indicate it is plugged in.
is there any sound from PC when connecting usb?
No.
what is happening on statusbat when you connect usb?
I assume you mean the battery status indicator in the notification bar? It shows that the battery is charging.
what is happening at kies window when you connect the phone?
Nothing...literally.
what is happening at phone display when you connect the phone?
Because I have "USB Setting" set to "Ask On Connection," a menu pops up with three options: Samsung Kies; Media Player; Mass Storage. None of the options seem to do anything. Even with USB set to "Samsung Kies," nothing happens.
Click to expand...
Click to collapse
Sometimes my computer also fails to recognize the phone. What i do is restart the computer/restart the phone/try again later.
Make sure your Kies is updated.
Try on another computer.
Last option: Give it to Samsung Service Center. They will mostly do it for free or for a very minimal fee.
do this http://forum.xda-developers.com/showthread.php?t=1379650
just ignore the portions for ICS
Thanks for the suggestion. I've downloaded all the files. I've also done a factory reset as well as formatted the internal memory card. As far as I can tell, my phone is as close to stock as it possible could be.
I can NOT connect my phone to ANY computer. I've tried four different computers now. Tried installing the USB drivers on one of them...nothing.
I'm starting to think that I have a hardware issue. The phone recognizes that it's connected to a PC though...so I'm not 100% convinced.
Okay...so there has been a new development.
I grabbed another phone (Samsung I997R), and tried it using the same cable and same USB port, and it recognized the phone instantly. Was able to enable Mass Storage and see everything on the phone.
So, that being said, does anyone know why my I9000M won't be seen?
You have already tried everything you could, so new just goto the Samsung Service Center and ask them what the problem is.
Sent from my GT-I9000 using XDA App
Yeah, I'll have to do that I think.
I tried plugging it in to a laptop running Linux last night...still no dice. My buddies SGS2 was recognized immediately.
I toured over to the Bell store last night for ****s and giggles, and the Samsung rep happened to be there. Dude didn't really know anything though...said he's only been on the job for a couple months. Plugged it in to the PC at the store...same deal.
I assume your phone charges OK when using the wall wart or plugged into a PC?
Yup...charges perfectly fine. The phone even recognizes when it's hooked to a computer (launches whichever USB mode is selected). It's just NOT being seen by any computer I plug it in to...but other phones are recognized using the exact same equipment (i.e. USB cable, computer, port, etc. are all the same).
Is it rooted? A guy i work with said kies wouldn't recognize it after rooting his.
Used to work fine, last time I connected was doing an upgrade about 3 weeks ago to the UCLA modem and kernel and 2.3.6 ROM.
Today I tried to connect via USB to transfer a new book I'd downloaded, and Windows didn't recognize the device. Has the error USB Device not recognized.
It shows on the device in the status area that MTP is installed, and it says on the device that USB is connected.
Tried everything. I have the latest version of Kies, uninstalled and re-installed. Deleted the device, let windows re-install it. The tablet charges fine via the same cable. I've tried different USB ports.
My Samsung Galaxy S2 Skyrocket connects on the same computer, seen by Kies, can transfer USB. Works on the same USB port!
And of course I have USB debugging turned on.
Any thoughts. I am certain it was due to the change of ROM.
Bump........
Hi Harry_fine,
Try it :
- Disable usb debug mode
- Lock the screen <-- very important step.If you don't do this, kies doesn't recognize the Tab*
- Connect Tab via USB to Win7 64Bit
- Start Kies
To get kies to recognize the tab, you need to have the original touchwiz launcher set as the default launcher
I seen this on other post. May be it can help you.
Good luck.
harry_fine said:
Used to work fine, last time I connected was doing an upgrade about 3 weeks ago to the UCLA modem and kernel and 2.3.6 ROM.
Click to expand...
Click to collapse
Are you sure you are in correct forum? I have never heard about UCLA modem or 2.3.6 ROM for GT8.9
Latest modem we have is KJ6 and Android version should be 3.2
Sorry, I was confusing this with my Galaxy S2 Skyrocket.
This is 2.6.36.3 kernel, Android 3.2, which I think is the latest official stock for the Tab. I think I used P7300XWKL4_P7300ATOKI1_P7300XXKJ6_HOME.tar.md5 for the upgrade.
Didn't work, same problem. Anyone else?
Tried a solution I found online, found some very long file extensions on the SDCARD, removed them, rebooted phone, and now no problem connected as a drive using MTP, and installing driver.
so what's the solution??
lastiko said:
so what's the solution??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=31929746&postcount=236
Simply install the drivers, reboot the PC, then connect the device.
subtil123 said:
Hi Harry_fine,
Try it :
- Disable usb debug mode
- Lock the screen <-- very important step.If you don't do this, kies doesn't recognize the Tab*
- Connect Tab via USB to Win7 64Bit
- Start Kies
To get kies to recognize the tab, you need to have the original touchwiz launcher set as the default launcher
I seen this on other post. May be it can help you.
Good luck.
Click to expand...
Click to collapse
it really works out.......thank you :good:
i have a galaxy note 10.1 and it didnt recognize not even the Adapter Cable.....
I have Samsung P7300
just want to root it, but my PC does not even recognize it. not even Kies..
done all the things searching on XDA and other sites, but still the same Problem,
I cant even find the MTP thing under USB Storage.
I can Connect my Samsung galaxy S Plus i9001 to it.
i have installed/uninstalled Drivers, and kies many times.
My problem is why there is NO MTP Option in this device, it is not even rooted.
.
hey guys
i am not able to connect to kies.
It always show some error asking to activate usb debugging and says connect in pc studio mode
i uninstalled and reinstalled kies but still not working
when i connect my phone to pc it recognizes the hon and also starts charging
plz help
sitanshu91 said:
hey guys
i am not able to connect to kies.
It always show some error asking to activate usb debugging and says connect in pc studio mode
i uninstalled and reinstalled kies but still not working
when i connect my phone to pc it recognizes the hon and also starts charging
plz help
Click to expand...
Click to collapse
Disable USB debugging.
i have disabled usb debugging but sam problem continues ..
this has happened after i got an update on kies
Update Kies and also try different USB ports.
tried all things but cannot connect to kies
the message is shown as
reconnect the device in samsung kies mode
current connections not supported by kies
i have disabled the usb debugging mode from setting>application>development>usb debugging
can someone help me with this
thanks
I have the same problem. Anyone know what to do?
Same problem here.. think it's modded ICS rom related... hope it'l get solved once official ICS gets released...
Sent from my GT-N7000 using xda premium
im on stock LA4
On my build I've found that my front usb ports fail when connecting to kies 99% of the time, but back ports are pretty reliable.
I take it you don't have root or cwm? These will affect kies connection. Also if you've frozen any samsung apps, it's likely kies will fail. To be honest, even when I was fully stocked it failed often, buggy as hell.
Another thing to try, put it in usb storage mode, connect in a back port so it loads drivers, disconnect. Then attach in same port in normal mode. Sometimes this can help. If no luck, try kies wifi after having attached in usb storage mode.
Good luck.
Sent from my GT-N7000 using xda premium
No root and kies wifi also fail :/
Had the same problem. Windows 7 home, 64-bit.
Today I shut down the Samsung Note, then put it on again and ..... no problem with the connection to KIES. I hope it will connect again tomorrow and on.
Actually i unonstalled the kies firat and then all samsung drivers(this is imp. And must)......reinstalled them and connected the phone
Now all good kies recognises my phone
Sent from my GT-N7000 using xda premium
ICS and Kies are not compatible.
Sent from my SGH-I777 using XDA
CaliCal said:
ICS and Kies are not compatible.
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Kies is there only on Samsung issued firmware..
Kies will not work on anything that is custom .. be it GB or ICS
Seems this problem has resurfaced. I am on ICS - upgraded via Kies, then rooted.
Now Kies gives me the 'usb debugging' error, regardless of what is set for USB debugging and will not connect.
This is an updated Kies - and it appears there is an updated HK ICS rom out.
Comments?
Thanks
I've latest KIES version, the tab is rooted and cwmodded but stock rom. When I try to connect it to kies I get a neverending "connecting", so basically it never establishes a connection. I tried reinstaling drivers and with and without debug usb, but no luck. Do you have any clue?
same as my tab,
Sent from my GT-I9300 using xda app-developers app
Problem with KIES
My tablet is not rooted, it have stock rom, haven't changed anything. I have installed latest KIES on my laptop with Win 7 x64. When I try to connect my tablet to PC, I can access it's contains, but if I try to connect to KIES it say: Cannot start service on the device. Please disconnect and reconnect the device. I try that too, but every time it's the same. I have tried to re-install KIES couple of times, but it's always the same story... Anybody have some ideas?
I able to connect in the pass, that was how I get android 3.1 upgraded to 3.2
Sent from my GT-I9300 using xda app-developers app
I had the same issue, then I reinstalled the drivers, REinstalled KIES and there even was some messing around in "services". for WIFI connection thou, but it fixed my connection issue via cable.
When I bought my "8.9 tab wifi only"and plugged it up for the first time i had no problems using kies. It updated to 3.2 the NEVER worked again.Once you install kies it installes your drivers. If you uninstall kies it will ask if you want to keep the drivers or uninstall them."KEEP THE DRIVERS" I don't use kies at all. I use drag-n-drop to transfer files.You may also notice at times when moving files"mostly video" that windows explorer will crash"may just be my p.c." but a way around that is to simply zip the file,move it to your device,unzip from device using a file manager,I use "file manager HD"
Galaxy Tab 8.9 not connecting to Kies
Same problem here, Connected first time to Kies but since updating Kies I have never been able to connect.
Uninstalled and Reinstalled various times, restarting computer but still inop.
kies has many problems in its own software... ur pc can see it very well... samsung released a "Piece of Cr*P" software to just show themselves... Kies isnt really useful for anything rather than updates and syncronizing...
I saw someone posted a quote from samsung about the kies problem, and the only answer was its kies thats messing, not the tablet
I had this problem and I fixed it by reinstalling kies and basically enabling WIFI synk from pc (Kies setup guide) and after that it works from the USB.
(sorry for typos)
I had a similar problem but I ended up downloading the latest version of keis first. I also checked to make sure my computer was up to date with the latest usb drivers. After an update the Samsung keis software recognized my tab and was up and running.
Sent from my GT-P7310 using Tapatalk 2
first you should have usb debugging off
second, I tried all sorts of solutions (like uninstall/ install back again for kies or drivers and so on). I think there is a problem with the drivers.
If you plug in your tab, go to device manager and look for unknown devices or so (entries with exclamation marks and so )
I got it installed as samsung composite usb but also got part of the drivers not being correctly installed ( PCI flash memory having exclamation mark)
the only solution I found was to factory reset the tab. I did this and the tab is now recognized by Kies via USB without doing any additional work to the drivers or kies installation
latest kies version as of the post date, Windows 7 professional x64.
I still don't know if it was some wrong setting for an app or the firmware itself had something messed.
by the way, the tab was only 2 weeks old and it didn't connect from the very first time although the tab was just out of the box with no root/CWM recovery. just everything stock with normal apps and it didn't connect.
it happen to my nexus, but when I change to other PC, it working fine.. my 8.93G connecting very good for this moment and hope it will till i sell it..