[Q] Flashing Kernel - XPERIA X8 Q&A, Help & Troubleshooting

Hey people,
i was reading a lot of posts and topics and i'm really really really very confuse now.
Some people say that we put the kernel file in the Flashtool folder, blablabla, and then we flash, blabla, some people say we have to change another file and make a bundle or whatever and blablabla, blablabla, blablabla! a lot of ways are told in the different topics
I just want to know exactly all the steps from downloading the kernel to turn on the phone with the new kernel (i already unlocked the bootloader sucessfully)
If theres differents steps from kernel to kernel, i just want the steps for the FXP Kernel and (if diferent) to the CM Kernel.
Thanks in advance

I did like that :
1.download kernel linuxdx
2.put ftf to firmwares folder in flashtool
3. Run flashtool
4.press flash
5. Select linuxdx kernel
6. Flashed linuxdx in less than 2minutes
7.take out the cable
8. Boot phone, install gingerdx
9.reboot
10.Enjoy new kernel and ROM
Sent from my X8 using XDA Premium App

So... what about the loader? We don't need to do nothing to that? And is that the same process to FXP Kernel?

RockitOut11 said:
So... what about the loader? We don't need to do nothing to that? And is that the same process to FXP Kernel?
Click to expand...
Click to collapse
Yes the same on fxp kernel
Sent from my X8 using XDA Premium App

with what did you install gingerdx?

0rang33 said:
with what did you install gingerdx?
Click to expand...
Click to collapse
Clockworkmod recovery?
Sent from my X8 using XDA Premium App

return to original kernel
proadi96 said:
I did like that :
1.download kernel linuxdx
2.put ftf to firmwares folder in flashtool
3. Run flashtool
4.press flash
5. Select linuxdx kernel
6. Flashed linuxdx in less than 2minutes
7.take out the cable
8. Boot phone, install gingerdx
9.reboot
10.Enjoy new kernel and ROM
Sent from my X8 using XDA Premium App
Click to expand...
Click to collapse
If I try the linuxdx kernel and want to switch back to original kernel that I am using how would I do this? Do I have to back up the kernel to use it again? If so, how would I do that?
Thank you for your help!

Just download stock kernel too, it is posted in few places on forum.
If you will not want LDX ot FXP kernel then you just flash stock one.
Remember about full wipe if any problems after changing rom or kernel.
Also stock kernel will NOT have recovery... do backups! ;]

Thank you for your help!

That "bla bla bla bla bla" way is the correct way!

RockitOut11 said:
So... what about the loader? We don't need to do nothing to that? And is that the same process to FXP Kernel?
Click to expand...
Click to collapse
If you are useing per made kernel like linuxdx.04
loader is all ready in the ftf file
If you get a file call kernel.sin then you will need. The loader.sin
And make a ftf file in flash tool
super.sense on x8

velnens123 said:
That "bla bla bla bla bla" way is the correct way!
Click to expand...
Click to collapse
i installed minicm6 on my w8.. but i need to install rom 2.3.7 on my phone.
i tried to install 2.3.5 and while booting my phone got stuck in the primary logo of cynogenmod.i am doomed.
can anyone help me out...i need to update my phone to 2.3.7

U mean no need to unlock the bootloader??

eric793tp3 said:
U mean no need to unlock the bootloader??
Click to expand...
Click to collapse
yes you need to unlock bootloader

Related

[Q] Boot loader

Heya!
I've a question. THat if i unlock my boot loader, and flash a new kernel, will i need to reinstall my current rom, or its not important?
It is depending on the fact that your current rom is compatible with the kernel or not?
Gingerdx-->Alfs or ldx
minicm7.2-->naA kernel.
Hope this will help ...
Sent from my E15i using xda premium
Straboterous said:
Heya!
I've a question. THat if i unlock my boot loader, and flash a new kernel, will i need to reinstall my current rom, or its not important?
Click to expand...
Click to collapse
Just a suggestion: unlock bootloader after restoring phone with seus to base 2.1, so there will be far less (or none) problem through the procedure.
Sent from my heart using a brain )
One question, the recommended step if i want to flash custom kernel n rom is:
-flash kernel first,then rom
Or
-flash rom,then kernel..?
Sent from my E15 using xda premium
First flash kernel. I think you can do the opposite, but flashing kernel first is the best solution.
Sent from my heart using a brain )
i read that after unlocking bootloader, the xrecovery no longer works. so if i flash back my phone to 2.1, if i root and install xrecovery, will the xrecovery works..? or i must install CWM instead..?
and what i must do if i want to flash a ROM that need to be flash with xrecovery..?
Install the Dual-Mode recovery with x8Toolbox, that'll give you xRecovery AND CWM.
B.Jay said:
Install the Dual-Mode recovery with x8Toolbox, that'll give you xRecovery AND CWM.
Click to expand...
Click to collapse
ok..i already read the post.so...how do i use this..? i see alot of links but dont find any proper instructions. sorry.
can u teach me how..?
Thx for the usefull comments, and i have 1 more problem, the pcc shows that my phone is w8 (e16.) But it wrong because its e15... so i cant unlock my bootloader because the . Cmd file gives me error (cannot finde the path or aomething like that, and the flashing is aborted)
Sent from my X8
Straboterous said:
Thx for the usefull comments, and i have 1 more problem, the pcc shows that my phone is w8 (e16.) But it wrong because its e15... so i cant unlock my bootloader because the . Cmd file gives me error (cannot finde the path or aomething like that, and the flashing is aborted)
Sent from my X8
Click to expand...
Click to collapse
Használd a SEUS-t inkább. Ott kiválasztod, hogy X8-ad van, és ráflasheli az E15 firmware-jét, utána szerintem menni fog.
--
Use SEUS instead of PCC. There you can chose that you've got X8, then it will flash E15 firmware, then I think it will work.
Köszi szèpen! / thx
Sent from my X8

PrimeHd6

i installed primeHD6 after i did that i can't access xrecovery or clockworkmod when i press back button or volume up stock at sony Ericsson white
love_story99000 said:
i installed primeHD6 after i did that i can't access xrecovery or clockworkmod when i press back button or volume up stock at sony Ericsson white
Click to expand...
Click to collapse
It is a soft brick. Recover via PCC/SEUS
what kernel are you on ?
Did you make a full wipe before flashing the ROM ? If not , do it next time
need help
i make a full wipe i don't know my kernel version and i'm newbie and i don't know how to use PCC/SEUS . is it seriously danger at my phone
love_story99000 said:
i installed primeHD6 after i did that i can't access xrecovery or clockworkmod when i press back button or volume up stock at sony Ericsson white
Click to expand...
Click to collapse
I know you're problem! Some roms will disable recovery (for example: ICS for stock)
To fix this, Download X8Toolbox:
http://forum.xda-developers.com/showthread.php?t=1117100
You will need to have the drivers for your X8 Phone (download on sony's website)
You can install them through device manger!
Now open x8 toolbox, and install a recovery. You can choose
Good luck! after the installation your phone should be able to go to recovery!
I'm new to XDA!
Please press the "thanks" button if i helped!
it really helped
i want to know what stock kernel mean and how i can make latest kernel to my phone to install new ROM avoiding soft brick
???
i don't know waht stock kernel mean but i know how to install custom kernel
you will need flashtool and kernel that you want to installl
move kernel in firmwares in flastool folder
tha n run flashtool and turn off phone
go to flash and choose your kernel than press ok and connect you phone with pc in flash mode tha nafter the procces is done turn on phone and press back button until you go into xrecovery or CWM....
then flash to ROM
remember to do a full wipe
or in case of installing alfs kernel
flash latest version and install update adreno libs and other stuff unless it won't work ok...
press thanks if i helped
love_story99000 said:
i want to know what stock kernel mean and how i can make latest kernel to my phone to install new ROM avoiding soft brick
Click to expand...
Click to collapse
I think you are confused...
Take it from the start, its not necessary that you have brick when you install custom rom with stock kernel. If you have stock kernel you will search for roms which are for stock kernel..as simple as that...if you want to install custom kernel you have to unlock bootloader which is very risky and can't be done to all x8. If you want to check it take off your battery, there will be a code on your phone( no the one on battery) if it is under 11w29 then congrats you are from the lucky one that can unlock bootloader.
*stock kernel mean the original kernel that the phone have when you buy it
Sent from my X8 using xda premium
I inslld dis rom .....its gud but i cnt acess my xrecovery when i press back button ....cn anyone hlp thnx in advance
Sent from my E16i using xda premium
manu.melli99 said:
I inslld dis rom .....its gud but i cnt acess my xrecovery when i press back button ....cn anyone hlp thnx in advance
Sent from my E16i using xda premium
Click to expand...
Click to collapse
Download x8toolbox and install cwm.
Done
Sent from my X8 using xda premium
Thnk u man .....i done with it ....!!!
Sent from my E16i using xda premium

[Q] Afeter unlock bootloader i can´t run any ROM....helP!!!

X8 ....After unlocking bootloader it went out of SIM signal....imanage to solve this problem.
But i have a mayor problem: I`ve tried to install GingerDx, PrimeHD, MiniCM9, on Sock and Custom Kernels and it always stuks at booting.
Before unlocking bootloader stock kernel ROMs were runnig all right, even PrimeHD 7.0 with nAa 11 worked but not anymore.
Anyone knows what is happening, should i relock and unlock it again?
did you fill wipe? you need to flash kernel, install rom and full wipe
fifo171 said:
did you fill wipe? you need to flash kernel, install rom and full wipe
Click to expand...
Click to collapse
Yes...full wipe= Done...but doesn`t work after full wipping.
well are you sure you have unlocked your bootloader?
re-check with s1tool...if it's unlocked then with flashtool go back to stock rom,kernel(android 2.1) and then root it again install recovery and then first try to install some other rom for stock kernel and then install custom kernel and then custom ROM
Pay attention on your ftf kernel files...i accidently downlaoded U20 nAa kernel instead of x8 nAa kernel...and guest what-->that kernel didn't work so whatch out for which phone is ftf kernel file
i hope i helped
8cpaiw said:
well are you sure you have unlocked your bootloader?
re-check with s1tool...if it's unlocked then with flashtool go back to stock rom,kernel(android 2.1) and then root it again install recovery and then first try to install some other rom for stock kernel and then install custom kernel and then custom ROM
Pay attention on your ftf kernel files...i accidently downlaoded U20 nAa kernel instead of x8 nAa kernel...and guest what-->that kernel didn't work so whatch out for which phone is ftf kernel file
i hope i helped
Click to expand...
Click to collapse
Yes, i`ve done this!!!....The same happens to me with U20 nAa kernel....
I`ve donde exactly what you describe above but i still couldn`t install custom Roms.....pretty weird
Flesh phone with seus and do same procedures again
Sent from my E15i using xda premium
yes that pretty weird but try with SEUS/PCC and then re-do the installation of kernel and rom
.....GOOD LUCK man
8cpaiw said:
yes that pretty weird but try with SEUS/PCC and then re-do the installation of kernel and rom
.....GOOD LUCK man
Click to expand...
Click to collapse
I`ve donde this.....i don`t know how.
I will try all again.
which combination of rom and kernel did you try? try nAa kernel (not the ics one) and MiniCM7 rom
can you make a video and show us your problem?
I finally solve it!!!
Idon`t know how but i repeat the same procedure time after time and i can finally instal GingerDx v025 in Stock kernel.
Thanks to everyone that helped me!!!

[q] can i flash gingerdx on 11w35?

hi.. the thread title on gingerdx says stock (does it mean stock kernel?) but the op post says a cwm recovery is required.. and cwm requires an unlocked bootloader..
is there a way i can flash this custom rom?
is it safe from hardbrick x8?
silenth2o said:
hi.. the thread title on gingerdx says stock (does it mean stock kernel?) but the op post says a cwm recovery is required.. and cwm requires an unlocked bootloader..
is there a way i can flash this custom rom?
is it safe from hardbrick x8?
Click to expand...
Click to collapse
Download x8 toolbox & install CWM on stock kernel by it..
Then flash Gingerdx for stock..
see boot animation without rebooting
@silenth2o
If gogeta post something useful for you just press 'thanks' to him ok....
Sent from my E15i using xda app-developers app
is it safe? will i not get hardbrick for it?
can you point me to forum links how to flash cwm using x8toolbox?
silenth2o said:
is it safe? will i not get hardbrick for it?
can you point me to forum links how to flash cwm using x8toolbox?
Click to expand...
Click to collapse
1.u can get hardbrick only if you try to unlock bootloader
2. Use search for x8 toolbox
see boot animation without rebooting
thanks a lot!!!
edit:
found the x8toolbox thread. x8toolbox
I use the v030, I liked because you can adjustment and the led

Revert to Stock Kernel & ROM issue!

Hi Guys,
I have my x8 phone running on nAa's latest v6 kernel with ZenceFil ROM(GB 2.3.7) with ofcourse an un-locked bootloader. But now i want to move back to stock settings.
I had made a backup using xRecovery before installing these mods, so my question is, how to I restore that xRecovery backup along with the stock kernel which i already got from the unlock bootloader thread??
I tried flashing the stock kernel but then the phone just get's stuck in the boot logo page with Sony Ericsson logo, can't even open the recovery, which i guess is not included in the stock kernel file.
I tried installing xRecovery by copying its files to /system/bin but still i have CWM as recovery!
Please advise...
p.s. I saw this thread, but the solution provided there is not working for me as PCC is not helping, it juts say's no s/w found for your device. Also I don't want to lock the boot loader.
Flash stock 2.1 trough flash tool>root it>instal xrecovery and then restore backup.
iks8 said:
Flash stock 2.1 trough flash tool>root it>instal xrecovery and then restore backup.
Click to expand...
Click to collapse
I have downloaded the stock 2.1 rom but how do i flash a ROM using flash tool? I don't see that option..
Flash it like kernel.
Sent from my GT-P3110 using Tapatalk 4
NAA6 is using difrent system-data partition size. If you want to move to other kernel you need first boot into cwm and format data and system partitions, then flash other kernels.
You can also flash your phone with SEUS and you will have stock rom-kernel like you had when you bouth the phone (if your bootloader was unlocked SEUS will leave it unlocked).
Stock rom and kernel you can flash using Flash Tool, just move the ftf file (for exemple 2.1.1.C.0.0.ftf) move this to the FIRMWARE flashtool' folder. Open flash tool and click on the "lightning" icon, (on old version click on flash) and select flash mode. Turn off the phone and flash it like a normal kernel.
But the stock rom that i downloaded has no ftf file! It's a normal backup have 4 .img files.. how do i flash that?
Sent from my Canvas 2 using XDA Developers App
You could use SEUS. It will install the newest firmware for x8 and it won't relock bootloader (for me it don't relock it), but you have to root your phone and install xrecovery one more time.
AndroidNotMaster said:
You could use SEUS. It will install the newest firmware for x8 and it won't relock bootloader (for me it don't relock it), but you have to root your phone and install xrecovery one more time.
Click to expand...
Click to collapse
Thats way i do it. Nice and easy way
Sent from my X8 using xda premium
Thanks will try that.. Can you please provide a link from where i can get SEUS
Sent from my Canvas 2 using XDA Developers App
ibshar said:
Thanks will try that.. Can you please provide a link from where i can get SEUS
Sent from my Canvas 2 using XDA Developers App
Click to expand...
Click to collapse
Search here
http://www.google.co.in
Sent from my iPhone :silly: don't flame me
wanna hang out with us? click here
stock kernal for canvas 2
I have been using canvas 2 from the past 3 months and I have flashed a custom kernel in it and now I get a error-
"Can't connect to camera" whenever I try to run it
Please help me by giving sugetions to fix it or
Please please please give me a link to the stock kernal
I am using thunder zap for now and its horrible
Please help me its urgent.:crying:
This is not the correct thread to post ur query, please move to the Micromax A110 thread and post there.. You also need to specify which rom you are using!
Sent from my Canvas 2 using XDA Premium 4 app

Categories

Resources