Hi,
Today I found a problem with my phone. Firstly it hang and then after reset after a start screen it enters the data transfer/recovery mode witch looks like that
telephone -> usb cable -> laptop.
I cannot enter boot loader and also hard reset is not working.
Does anyone has any idea how to fix it?
Additional information:
week ago I have installed Deepshinging mango 7.5 with HSPL.
After connecting with zune it enters recovery mode, and if I try to proceed the arrow on the phone screen above changes direction to the opposite and it is crossed. After that there is an automatic reset of phone (it enters the same data transfer/recovery mode) and zune writes error 801812E0.
Try removing the USB cord and battery, then waiting a while (like 30 seconds). Put the batty back in, cross your fingers, and power on the phone.
My phone (retail ROM, OSPL) got stuck on that screen after I used the backup-at-any-time tool. Normal reboots just kept going back to that screen. The steps above fixed it. Hope that helps!
Nope, I have tried to:
- remove battery
- completely discharge battery
and still the same.
Hello,
If your phone is in mango you have to downgrade to nodo using the gold card.
Cheers.
Related
Hy guys, after some month with my diamond and (hundred of rom changed), yesterday my phone started to reset every few seconds without possibility to start windows ...
it's seems that or soft rest button is dmaged or something with battery fault. I've tried two different battery but no way.
I've tried to flash a standard rom but after upgrade there's error an no way to finish process.
Now it' s difficult also have a soft reset because when i push red button nothing happens. Sometimes without battery i'm able to go in a boot mode...but whe i put my battery phone restart as before....
So i'm desperate......
Any suggestion???
regards
You could try to format your device and then freshly flash a new ROM:
http://forum.xda-developers.com/showpost.php?p=3433851&postcount=22
AAAARRRRRg my diamond is definitly briked.. I've tried everything to solve my problem but no way. It seems that i've a power button, so every time i put battery and start phone, after a couple of seconds i've reset in loop....
No way to take in boot mode....
There's a way to recover my data in "internal storage"??
Regards
Hello.
I'm opening this thread because my Diamond seems to be diying and I wanted to know if someone got an idea.
Yesterday, my phone suddendly rebooted without warning after a month.
I thought It was nothing, but the phone started to reboot allthe time. The phone boot, show my operator logo (befor the winmo loading screen), and then reboot again, again and again.
I decided to do a little Mtty maintenance and reflash (from internal memory). The phone reworked for a couple of hours and restarted to do a reboot loop. I thought the rom I was using was in fault.
Re Mtty maintenant and flashing the phone with mu Prange stock rom. Several hours léter, the phone restarted to boot.
So where I am ?
If I let the phone off (like a night), he will launch windows and will works between a couple of minutes from a couple of hours befoor rebooting. If I put the phone in bootloader mode It won't reboot and will wait with his beautiful rainbow screen. But if I leav the bootloader mode, reboot over reboot, yay !
When the phonedecide to boot completly,it's a regular soft reset, not a hard reset.
Did anyone here have an idea ? Thanks !
How often did you flash since you have your diamond ?
Try to reflash a radio. Maybe your flash memory is dead =/
It sounds like the rom image might be corrupted - I had this problem with a 28003 rom I tried in which the phone would take a hard reset - boot fine - reset and reload fine... and then whenever you tried to restart it after that it went into a boot loop that eventually came up with a screen saying "the phone cannot boot because of uncertified software or incorrect shutdown procedure"
I solved it by putting the phone into bootloader (switch on holding both power key and volume down key) - connecting it to my computer and reflashing it. It DOES NOT need a activesync connection in this mode but you do need the Hard-SPL on the phone (im running olinex 1.40)
hope that helps
Jemma
Thx JoOos and Jemmauk.
But I already tried to reflash the Radio and the rom Image.
I Tried 3 different Rom images.
One orange official , aztor re-evo and an another one.
But the phone don't display any errors. It will just never stop to reboot without saying a thing.
Same problem in a different thread
Have a look at http://forum.xda-developers.com/showthread.php?p=5279740.
So after an unsuccessful ROM flash my phone was stuck at bootloader for quite sometime...i had a micro SD card reader and inserted it into multiple computers running XP, vista and ubuntu...they all registered that i had plugged something in but wouldn't show it as a disk drive...now i've already figured out how to access it but i put a new ROM image on it and tried to reflash but after the flash when my phone booted up it simply switched itself off... when i switched it back on it went back to the bootloader and tried to reflash the ROM. mid flash it just switches itself off... I realize that this is probably due to the charge level of the phone so i plugged it it but it will be off and charging then it will suddenly decide its got enough battery power and boot up to the bootloader screen until it dies again...how do i stop this vicious loop
tlglegacy said:
So after an unsuccessful ROM flash my phone was stuck at bootloader for quite sometime...i had a micro SD card reader and inserted it into multiple computers running XP, vista and ubuntu...they all registered that i had plugged something in but wouldn't show it as a disk drive...now i've already figured out how to access it but i put a new ROM image on it and tried to reflash but after the flash when my phone booted up it simply switched itself off... when i switched it back on it went back to the bootloader and tried to reflash the ROM. mid flash it just switches itself off... I realize that this is probably due to the charge level of the phone so i plugged it it but it will be off and charging then it will suddenly decide its got enough battery power and boot up to the bootloader screen until it dies again...how do i stop this vicious loop
Click to expand...
Click to collapse
can you put your phone into bootloader mode (power and vol down together whilst powering on)? be a good idea to remove your sd card first.
cr1960 said:
can you put your phone into bootloader mode (power and vol down together whilst powering on)? be a good idea to remove your sd card first.
Click to expand...
Click to collapse
I can't really manually put it into bootloader mode, but when the phone thinks its charged enough it will start up itself and go into bootloader mode
Does your phone say "RUUNBH" in the top right corner? Have you yanked out your battery then put it back in before charging? Those are the two things I would try. And BTW, in the future you shouldn't create two threads in different parts of the forum.
DaveTheTytnIIGuy said:
Does your phone say "RUUNBH" in the top right corner? Have you yanked out your battery then put it back in before charging? Those are the two things I would try. And BTW, in the future you shouldn't create two threads in different parts of the forum.
Click to expand...
Click to collapse
yea im sorry its just my phones been down for days and its really bugging me and i just want to get this fixed and my phone does say RUUNBH in the top right corner and i have yanked out the battery waited a few seconds for good measure and put it back in before charging...it still just loops into bootloader before dieing and charging again
Phone started up again this is what it says in bootloader
RHOD300 32 M SS-BC RUUNBH in top right
SPL-0.85.Olinex
MicroP(LED) 0x0A
MircroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
then it has some numbers and code error under it with try again
then it says 218,842 calibrated
Okay, the problem is that the RUU flag is set, and the device won't do anything until that is cleared. What you need to do is establish a connection via MTTY. Follow the instructions here about how to connect to your device via MTTY. Once you get an MTTY connection established with your device (it may take awhile, MTTY is quirky like that), simply type
Code:
set 16 0
You may need to manually soft reset the device. Then, I highly recommend flashing to a stock ROM using the microSD card method, before flashing another cooked ROM.
DaveTheTytnIIGuy said:
Okay, the problem is that the RUU flag is set, and the device won't do anything until that is cleared. What you need to do is establish a connection via MTTY. Follow the instructions here about how to connect to your device via MTTY. Once you get an MTTY connection established with your device (it may take awhile, MTTY is quirky like that), simply type
Code:
set 16 0
You may need to manually soft reset the device. Then, I highly recommend flashing to a stock ROM using the microSD card method, before flashing another cooked ROM.
Click to expand...
Click to collapse
hey thanks Dave i plugged in the usb then i waited until my phone was charged enough to switch on and go to bootloader then i opened MTTY the USB port showed up i selected it and it connected no problem i typed in set 16 0 then the device reset and showed the touch pro 2 boot screen then my phone died and started charging...i left it charging overnight and this morning it booted up and started loading the ROM...after it was finished i hard reset it just to be sure and now it's working perfectly thanks very much i appreciate the help
Duplicate thread??
Dude!! you already opened this same thread here, and HERE. Why another??
Closing thread.
Don't do this again.
Hello everyone,
I am having problems to connect my Tilt to my pc.
First of all, when I power it on, the screen goes black and says "smart mobility" .. so far so good; but after a few seconds it starts again and loops endlessly. At that point the only way to power it down it to take the battery off.
I installed the drivers manually (Vista) and hoped to be able to use mmty (after pressing "camera button" and " power button") but I never managed to get a connection.
Does anyone have any ideas on how to get my HTC tilt back to a running state?
Sooo, this only happens when connected to the PC or all the time?
It happens all the time even when not connected to PC
I forgot the most important part ... this happend since I tried to update windows mobile (source downloaded from HTC official site).
Hard reset?
if you mean holding down both green and red headset button+pressing the reset button, yes I've tried that but didn't change anything.
It went through a whole process and nothing changed? Try to flash back to an oem rom. (seems to be the new popular suggestion).
ok but how can you do that if you can't get to connect it to a PC via usb?
By following the proper steps to flash a phone either by usb or SD card.
The phone doesn't need to be fully booted to flash.
Ok, that's good news for thanks.
If by any chance you have a link to a tuto in order to do that you're welcome. Otherwise I'll google it and get back to you to keep you posted.
It's all in the sticky
http://forum.xda-developers.com/showthread.php?t=397434
Thanks I shall try to night
Thank you for your time. I finally managed to do it and my HTC is back to running.
The only problem I had trouble to solve (if it can be of any help to anyone) is that I had to unrar the *.exe which I didn't could be done.
Thanks again
Today I left my phone in a cab and got it back in the evening. But after I got my phone it was stuck in a boot loop (after force restart - power button press and hold - it will go to battery icon and automatically restart after a few minutes and again goes to battery icon). Please see the video to understand the boot loop. Unfortunately, Developer options of the phone were not enabled.
Can boot to recovery but can boot to fastboot.
Can you please help me to boot my phone back to normal or sideload a ROM via adb.
tia
Was able to fix the issue. Followed below steps,
1. Kept phone until the battery fully drains
2. Plugged into the charger and charged the phone up to around 65% while the phone is switched off.
3. Switched on the phone when the cable is disconnected.
4. This time the phone was booted to recovery. No battery logo anymore
5. From recovery, rebooted the phone. But again it was booted to recovery.
6. Wiped all data and rebooted.
7. Phone was booted to MIUI os but had to set up the phone again from the beginning.
jayanath said:
Today I left my phone in a cab and got it back in the evening. But after I got my phone it was stuck in a boot loop (after force restart - power button press and hold - it will go to battery icon and automatically restart after a few minutes and again goes to battery icon). Please see the video to understand the boot loop. Unfortunately, Developer options of the phone were not enabled.
Can boot to recovery but can boot to fastboot.
Can you please help me to boot my phone back to normal or sideload a ROM via adb.
tia
Click to expand...
Click to collapse
Same problem bro, did u resolve it???
I think your battery is empty. Leave it on power for a while and check if its charging. Maybe the charginglevel is too low for booting up.
opg2000 said:
I think your battery is empty. Leave it on power for a while and check if its charging. Maybe the charginglevel is too low for booting up.
Click to expand...
Click to collapse
I hope it was that simple ..it seems probably like a bad update. My gfs phone did the similar today
The digitizer stopped working, I force reset the phone and boom ..recovery mode - Trying everything but it doesn't work. Wipe surely would work but she has pictures and videos so I'm trying to avoid that. Plug it to charging but she remembers it had like 75% of battery ...geez (hoping for a miracle)
EDIT: Probably this happen from the bad xiaomi update, anyway I did wipe the data and as expected it work without an issue, I'll unlock this phone and ditch MIUI (I mean I did it to my phone Xiaomi Mi Mix 2S from day 1 - I hate miui) ..now my gf has a reason to hate it too
A factory reset could be painful, since you would lose everything on the device. I saw a guy tap all over the back of the phone with two fingers, and boom! The Redmi Note 10 Pro boot normally! I tried it on a friend's phone, and it worked.
Hello,I had a kind of a similar thing.
I left my phone to charge and when I was back it seems to be stuck in a boot loop(MIUI14)
Well,I tried to force restart but the same.
Before I go to recovery mode,accidently,I putted the phone in fastboot mode.I restarted it in the try to go to recovery mode but the phone started normally.After boot,it's shows an update compete message,so te problem was from an android security path update whatever.
AlexfxDru said:
Hello,I had a kind of a similar thing.
I left my phone to charge and when I was back it seems to be stuck in a boot loop(MIUI14)
Well,I tried to force restart but the same.
Before I go to recovery mode,accidently,I putted the phone in fastboot mode.I restarted it in the try to go to recovery mode but the phone started normally.After boot,it's shows an update compete message,so te problem was from an android security path update whatever.
Click to expand...
Click to collapse
I have important apps on the phone and I wasnt thinking about a factory reset anyway but hopefully it worked in that way