i just downloaded from samfirmware:
S5570XWKS2
can anyone tell me does it work on:
S5570XXKPI
And how to install ?
Yes, it works. And I'm currently using that ROM !! I had XXKPI (2.3.4) and upgraded to WKS2 (2.3.5)
In Odin, Select the BOOT as APBOOT, Select PDA as CODE. OPS file should be TASS_V1.0.ops !!
See this Odin Screenshot, in the attachments!!
i downloaded the rar but the file was corrupted so i used this tutorial:
http://droidangel.blogspot.com/2011/11/s5570xwks7-spain-firmware-android-235.html
but now my phone says:
The application Setup Wizard (process com.sec.android.ugl) has stopped unexpectedly. Please try again.
The ROM is different, its WKS7 and its Single Package installation method.
Anyways I myself was not able to succeed flashing it from XXKPI (2.3.4) ROM. So I flashed WKS2 2.3.5 ROM, and it was successful.
Related
Hi Guys,
I've a problem with my galaxy s, I must repair the phone by assistance.
But I've a coocked firmware installed....
How I can replace the original TIM firmware?
I've downloaded a tar file, by a backup maked by a italian user; so...How I can install this firmware??? I've traied by odin...but nothing...
Please, can help me??
Thanks
Use the Kies Registry Patcher 1.7.0.0 (Just Search for Kies Reg Patcher in forum) and then select the code you need.
If it's only one *.tar file you have to make sure that re-partition is not checked.
Thanks friend,
but I've tried with odin (without repartition, but the process don't go....)
Other ideas?
Kies registry patcher NOT Odin .
Use it to spoof update read the posts on KRP.
That fails one downgrade to Eclair via ODIN then try KRP for update again using your networks correct codes .
I've downloaded a tar file, by a backup maked by a italian user; so...How I can install this firmware??? I've traied by odin...but nothing...
Not a clue what that means or is you would need to ask the supplier .
Original firmware comes from network and is not stock you either have a backup of your original rom or use kies to save it from original or find someone that can give you the network rom .
jje
I'm trying....
Thanks
I'll update you
Nothing...I've flashed a jm8 (2.1 android), than I've used Key patcher with TIM id, but Kies tell me: This firmware cna't be updated.....
None cooked firmware at least .
I've downloaded a tar file, by a backup maked by a italian user; so...How I can install this firmware??? I've traied by odin...but nothing..
Just wonder if that was a backup made using Clockwork Mod Recovery .
Whats in the tar file if you unzip it .
Clockwork shows 4 img files and one md5 file differnt file system for a rom .
Worth a try put it on your internal sd card and see if clockwork recovery picks it up .
jje
Ok, friend
I've flashed a 2.1 rom..than I used odin with the .tar file (tim branded, only pda file, without repartition and without .pit file)
After 3-4 time...the flash was ok!
Really thanks for your help
Great job glad you got their in the end .
jje
I'm stuck in a strange problem on my Galaxy S I9000
i'm running firmware 2.3.3 gingerbread JPJV6
it is rooted
i installed rom manager
i hit Flash clockworkmod recovery (on rom manager)
choosed my phone *samsung galaxys i9000*
downloded and installed successfully (alleged)
hit reboot to cwm recovery (on rom manager)
it reboot .. Android system recovery <3e>
and in red text (E:failed to verify whole-file signature "and" E:signature verification failed)
.............................
i don't know what's wrong here ... all i wanted to do is to apply updatefile.zip of cyanogen mod ....
..............................
i downloaded the updatefile of CWM and renamed to update.zip and tried to update from the android system recovery 3e it gave me same red error
..............................
can some one help me here please i'm stuck and don't know what to do .
I had some kind of this message one time, try to go in download mode to write again the PIT file.
i didn't understand what you mean by write again the PIT file .... you meant open odin3 get another PIT file ? or re-flash the gingerbread and then root it all over again ? you think this would fix anything ? i'm still confused not sure what to do
If you want CM, just flash custom kernel as a PDA in Odin. You will get CWM.
Then go to CM thread and follow instrcutions.
one last question ........ can you suggest a kernel to me .. I'm on rooted 2.3.3 gingerbread JPJV6 ..
3e is your problem, it only allows Samsung-signed packages. I'm using ChainFire's CF-Root kernel with stock JVT (until I get TeamHacksung's ICS working properly!)
A7madramadan said:
one last question ........ can you suggest a kernel to me .. I'm on rooted 2.3.3 gingerbread JPJV6 ..
Click to expand...
Click to collapse
Well, if you're going to CM, it is same what kernel to use when flashing CM. Just pick one up, like Semaphore, download it, put it in Odin as a PDA, flash it. Then you have CWM. In CM you can't use what ever kernel you want
thanks i'll download semaphore kernel and see what's gonna happen i appreciate your help here really
Hello,
pls someone help me!
I tried to install cm7.1 to my I9000 phone (android 2.1 was running on my phone, and didn't rooted)... I followed wiki description... I finished "Installing the ClockworkMod Recovery" section. But it seems was not successfully (command prompt showed it was succesfully).
The phone always try to boot. I can put into download mode (Odin cannot recognize it ) but can not put into recovery mode...
I don't know how to continue!
Download the samsun kies and install it (for the drivers), then try to flashe it
is it not problem than 2.1 was running on pone and it didn't rooted before i tried to installed cm7.1?
totoo0915 said:
is it not problem than 2.1 was running on pone and it didn't rooted before i tried to installed cm7.1?
Click to expand...
Click to collapse
You must put on the phone the 2.3.6 I9000JVU then installl the CF-Root for it and install CM7.1, but I recomande you CM7.2 or CM9 or 4.0.4 from Elitemovil beta 8
it sounds well... but i'm not perfect in it... i'm greenhorn...
if i understand well i should do this steps:
1) install kies with official driver...
2) find tutorial to install 2.3.5
3) root
4) install cm7.1 (cm7.2)
is it right?
Dirvers ok
huh...
I reinstalled Samsung Drivers and now Odin 1.83 recognise my Phone...
I've got 2 question:
1) android 2.1 was running on my phone... can I upgrade to 2.3.6 directly or at first upgrade to 2.2 and after ugrade 2.3?
2) if I upgrade 2.3.6 official version, download mode will remain?
pls help!
I was currently having lewa rom in my galaxy ace.. I decided to flash stock rom again. I had the latest indian rom from samfirmware.. i selected ops file then one package. It installed fine to the point of downloading system.rfs butnow its stuck on system.rfs in odin.. What should i do now please help immediately.
i removed my phone... it can go into download ,ode but when i again tried to flash the firmware it was stuck on something called download mibib.. what should i do now
hellrider0411 said:
i removed my phone... it can go into download ,ode but when i again tried to flash the firmware it was stuck on something called download mibib.. what should i do now
Click to expand...
Click to collapse
Try flashing the multi package one from any stock firmware. Then flash the one package of the region you use.
I hope stuck rom <<2.2.1 or 2.3 >>arabic ??
please linke ??
aswertya said:
I hope stuck rom <<2.2.1 or 2.3 >>arabic ??
please linke ??
Click to expand...
Click to collapse
im guessing you want stock rom for 2.3.6 in arabic...
well there is 2.3.5 as far as i know
latest stock rom for meddle east is 2.3.5 (JPKS1)
one package rom with this languages: English(us),France,Arabic,Persian,Urdu
download from here: http://hotfile.com/dl/135768007/9116...r.html?lang=en
Extract zip file, password:
sampro.pl
or
samfirmware.com
launch odin 4.38 and put tass.ops file in "select ops"
mark this box "one package"
put your rom file in odin.
reboot to Downloading mod (HOME+VOL Down and power)
if odin detect your phone click on start and wait...
before flashing remove SIM and SD. backup your apps,SMS,Contacts and data