[Q] NEED HELP !!! kernel problem !!! - XPERIA X8 Q&A, Help & Troubleshooting

I followed all the steps, my output on s1tool was almost identical, There were no errors at any point. Now, my phone is in a reboot loop. It shows the nAa kernel logo, then reboots. I can get into recovery, and all its functions seem to work.
i tested all kernel and i flashed back to SE stock and relock bootloader
and try again but i can't boot kernel
i unlock bootloader successfully

my problem too -.-

n1kolaa said:
my problem too -.-
Click to expand...
Click to collapse
we must find a way !!!why we can't use custom kernel ???
DEV help us help !!!

http://forum.xda-developers.com/showthread.php?t=1011071
give me a thanks , if i help you
---------- Post added at 11:26 AM ---------- Previous post was at 11:25 AM ----------
we can use custom kernel

n1kolaa said:
http://forum.xda-developers.com/showthread.php?t=1011071
give me a thanks , if i help you
---------- Post added at 11:26 AM ---------- Previous post was at 11:25 AM ----------
we can use custom kernel
Click to expand...
Click to collapse
you use it ?
you have my problem too and use this way and it works ?

i use it have no problem just falow totorial
sory for bed english

n1kolaa said:
i use it have no problem just falow totorial
sory for bed english
Click to expand...
Click to collapse
pls type here guide step .. step

1dowload fleshtool http://forum.xda-developers.com/showthread.php?t=920746 and rom image http://www.multiupload.com/XLV6AA41DB
2 open fleshtool , turn off phone set rom img to flesh , hold beck key and conect to usb and its done

i tried it but i have problem again

dowload PC Companion from se suite
Once downloaded and installed, launch it. Most probably it will download some updates. Then choose device updating and follow the instructions. As for flashing - the procedure with holidng back button is the same as with flashtool.

nikolaa if it's doesn't work i will kill you !!! lol i test it tonight

u are big noob or have hard brick
all working for me

be sure that you have a PC Companion in your computer and your phone detected

all thing is good i was very nooob !!!
pls close this froum

Related

[Q] Need help ! Can't instal any custom room on my X8 !

I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english
Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
which ROm are you trying to install? Please provide more info on your problem, so we could help you better
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
There are some problem that causes custom rom cannot boot. I will state the problem but, you gonna go search it for yourself.
1.Busybox not correctly installed
2.Root incorrectly
3.Baseband incompatible
4.Rom need custom kernel to work (Extra care.)
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
Also THE MAIN ONE make sure usb debugging is enabled
I do that all the time when i trying..
I do this for some times..5 or 6..whit different rooms. all the time stucks at sony logo and i can't enter in xRec or CWM..i restore it whit seus
przemek4113 said:
Flash your phone with seus,pc companion or flashtool.I always flash my phone with seus
Click to expand...
Click to collapse
I do that all the time when i trying..
AbirXtreme said:
Im guessing your coming from stock ,, so heres what you gotta do
if you bought the cell recently you don't need tio update your baseband,,
anyways heres what you must do
1. Root your phone
2.install xrecovery /Cwm
3.Move your desired rom to you memory cards,, not on any folder directly on the card
4. reboot and open xrecovery/Cwm(whichever the rom requires)
5.Data reset
6.Flash rom
anyways some roms require custom kernels in that case learn howto unlock your bootloader and flash the required custom kernel
and your good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
I do that..for 5 or 6 times..it fails!
tujamo1 said:
I do that..for 5 or 6 times..it fails!
Click to expand...
Click to collapse
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
tujamo1 said:
I can't install any custom rom on my x8. I instal it with xRecovery or CWM, do full wipe, rebot, and then stucks at "sony ersicsson" logo!
i have do that for 5 or 6 times whit different roomx..stucks at sony logo. I restore it at 2.1 whit seus. Every time when i try..it fail!
Any help..please!
Sory for bad english
Click to expand...
Click to collapse
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further
A little stupid hint...
Are you sure you are stuck at se logo? I mean, have you wait enough? Sometimes it gets up to 5 min to start and especially first time...
Sent from my E15i using xda premium
I think I understand you problem here
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps
Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD
so as mine can any one know how to upgrade 11W42
it is probably the fact you need custom kernel. But before trying to unlock bootloader, turn phone off,, take back cover and battery off and check your phones date ie
10w56 or 11w34 etc
Sent from my X8 using XDA App
sambavadekar said:
I think I understand your problem here.
Do not Full wipe after installing ROM
Always full wipe before installing, not after....I hope this helps
Click to expand...
Click to collapse
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App
CKKnot said:
-use flashtool
Okay now,
-root your phone(turn on usb debugging. don't remove usb yet)
-install busybox (don't remove usb yet)
-reboot your phone, if flash tool on PC showing busybox version : XXX XXX or whatever you are good to go if not, redo, (Problem in flashtool, driver or usb debugging not turned on)
-install xRecovery
-continue on Post by AbirXtreme ~
Note: when busybox showing version, there's is no need to use seus to go back again. you may just pull out the battery(with usb unplugged), wait for 10 sec and turn on again. Experiment with installing xRecovery on phone boot-up and try again without using seus... and if you stuck on the sony ericsson logo, wait... then try lock your screen. if screen can be locked (turn dark) mean that your root+busybox are good but xRecovery are not, just try many times to get to it.... and if all those above is not working... search other dev or thread
---------- Post added at 11:47 AM ---------- Previous post was at 11:40 AM ----------
ah, sorry to my previous post.... i wasn't read it carefully....
now that you can enter xRecovery/Cwm is good
now what you need is,
1. check the rom post for more info, if it says for custom kernel/alfs kernel/nAa kernel. Sorry you can't use this as your rom.(unlocking your bootloader will fix this issue. WARNING:It's dangerous, search )
2. Try flash my Fix for stock kernel and Fix for low performance at my post in dev section
3. Try full-wipe in every rom if you still have this problem
4. Cannot help your further
Click to expand...
Click to collapse
Thant's man. It work!
wilbso said:
Not in some cases. Some DEVS put when to do full wipe. So it depends on what the installation instructions are
Sent from my X8 using XDA App
Click to expand...
Click to collapse
I'm do this all the time when i flash a new rom. But a had make my phone work. Thanks anyway!
samu1player said:
Change Your Baseband! if Your Baseband finish in .......06
you need change it to ............15
Check your baseband in Settings/about phone
I Haved This problem and I Solve it Changing My Baseband! xD
Click to expand...
Click to collapse
My baseband ends with .......15

Stuck At "Samsung Galaxy Note" Screen - Please Help!

Hi all,
I just upgraded to a JB rom (RocketROM) from a rooted official ICS rom.
As instructed, when I wiped the phone using stock recovery, the device was rebooted.
I first thought, the software commanded the reboot.
Then, I loaded CWM.zip and tried to installed the rom.
The installation exited without any error.
Again, I thought, everything was OK and rebooted the device.
But, the phone stopped at "Samsung Galaxy Note" screen.
As I tried again, the stock recovery was overwritten with touch-CWM.
Now, I can't use the phone and can't go back to Samsung rom using odin.
Please help. T.T
I will upload a video of the problem shot with another phone.
Video:
cant u put the phone in download mode?
where did u get CWM.zip?
If you are able to get in download mode,then try to flash pre rooted gb rom from dr.ketan thread.
Or if you have a nandroid backup of your ex rom,and if you Can get in recovery mode,then restore it.
I would prefer first method.
Sent from my GT-N7000 using xda app-developers app
Are you already flashed Stock Rom with Odin? If you can't, seems you have an eMMC brick (aka SuperBrick). The only way to fix it is by the way of Repartition or leave your phone to your Warranty. Sorry man, first of all before flash a Rom you NEED TO READ everything about it. You CANT flash a rom with temporal CWM (CWM.zip) because you will have a brick, and when you do a WIPE/FACTORY RESET you need a Safe Kernel (SpeedMod, Hydracore etc) and not the stock kernel because they are infected with eMMC erase script.... Sorry my bad english. Greetings from Argentina!
If you did a wipe from stock ics kernel,then you might have bricked your phone
Try flashing a gb rom,if the process gets failed,then its a brick
Thank you all for your feedbacks and advices.
I found out PIT file tricks and finally get my phone loaded with a stock rom with custom kernel.
So, I got one step further now.
But, the phone stopped at "Samsung" logo.
Appreciate any advice..
the PIT was to be the last resort.. this meant u had access to the download mode.. u mite have lost 3gb of ur internal storage
what rom? wat kernel ?
samsung GT N7000 logo or the glowing samsung logo?
---------- Post added at 03:00 AM ---------- Previous post was at 02:50 AM ----------
if u are on a safe kernel.. reboot into recovery
wipe data/factory reset
wipe cache partition
advanced - > wipe dalvik cache
reboot
---------- Post added at 03:33 AM ---------- Previous post was at 03:00 AM ----------
to remove yellow triangle u can use Triangle away
http://forum.xda-developers.com/showthread.php?t=1494114
nokiamodeln91 said:
the PIT was to be the last resort.. this meant u had access to the download mode.. u mite have lost 3gb of ur internal storage
what rom? wat kernel ?
samsung GT N7000 logo or the glowing samsung logo?
---------- Post added at 03:00 AM ---------- Previous post was at 02:50 AM ----------
if u are on a safe kernel.. reboot into recovery
wipe data/factory reset
wipe cache partition
advanced - > wipe dalvik cache
reboot
---------- Post added at 03:33 AM ---------- Previous post was at 03:00 AM ----------
to remove yellow triangle u can use Triangle away
http://forum.xda-developers.com/showthread.php?t=1494114
Click to expand...
Click to collapse
Thanks so much.
Finally, the OS is running fine and triangle is gone.
But, the phone is showing blank IMEI and baseband as unknown.
Any help please?
ZeroHackeR said:
Thanks so much.
Finally, the OS is running fine and triangle is gone.
But, the phone is showing blank IMEI and baseband as unknown.
Any help please?
Click to expand...
Click to collapse
If. you have a backup of efs,then flash it and your problem will be solved
Sent from my GT-N7000 using xda app-developers app
yeah probably its because u chose to partition. as raj said.. if u have backup of ur efs that will help
rajsekhar.300 said:
If. you have a backup of efs,then flash it and your problem will be solved
Click to expand...
Click to collapse
nokiamodeln91 said:
yeah probably its because u chose to partition. as raj said.. if u have backup of ur efs that will help
Click to expand...
Click to collapse
Dear Both,
Thanks for your replies.
I again do not have efs.
Please kindly guide me whether I can download someone's efs and modify it.
I still can get IMEI and Serial numbers from the box.
Thanks again
U cant do it with some others efs backup
Even though u have imei,it doent help you without the efs backup
rajsekhar.300 said:
U cant do it with some others efs backup
Even though u have imei,it doent help you without the efs backup
Click to expand...
Click to collapse
Noted, Raj... :crying:
If I rooted and upgraded to a custom kernel, the kernel assigned me a fake IMEI and I could make phone calls.
With stock kernel, I couldn't connect to mobile network at all.
So, I think, the official repair is the only option now.
Luckily, it still have the warranty.
I will remove all modifications and restore original rom and recovery.
Then, will try to repair it at service center.
I've done a number of custom ROM updates on HTC HD2 and SIII.
These devices never gave me any problem.
Good thing is I've learnt a lot... ha ha...
ZeroHackeR said:
Dear Both,
Thanks for your replies.
I again do not have efs.
Please kindly guide me whether I can download someone's efs and modify it.
I still can get IMEI and Serial numbers from the box.
Thanks again
Click to expand...
Click to collapse
do u have root?
check in /efs folder -> is it empty or are there a lot of files, mainly "nv_data.bin", "nv_data.bin.md5"
if yes ... try following this thread
http://forum.xda-developers.com/showthread.php?t=1264021
---------- Post added at 04:50 PM ---------- Previous post was at 04:49 PM ----------
and i guess the stock GB rom will also connect you to the network but ICS wont
---------- Post added at 04:52 PM ---------- Previous post was at 04:50 PM ----------
but if u have warranty check with them.. i guess that would be the best option
nokiamodeln91 said:
do u have root?
check in /efs folder -> is it empty or are there a lot of files, mainly "nv_data.bin", "nv_data.bin.md5"
if yes ... try following this thread
http://forum.xda-developers.com/showthread.php?t=1264021
Click to expand...
Click to collapse
Yes, when it was rooted, I did check the /efs folder. It was empty.
Then, I checked it at CWM touch and I couldn't mount the /efs folder.
I think, /efs sector was also corrupted.
:crying::crying::crying:
Now, I just restored to a stock rom to go to an official service center.
hmmm.. good luck
nokiamodeln91 said:
hmmm.. good luck
Click to expand...
Click to collapse
Thanks bro... I will report back how the story ends...
Hopefully, it's a happy ending...
I heard that few people got restored their imei by flashing stock gb rom
I'm not sure but better try it once
Dear All,
Last week, I went to Samsung service center.
I just told them after software update, the phone lost the network connection.
As my phone was still under warranty, they didn't charge me any.
Yesterday, they sent back the phone and it's full functional now.
I think, they changed the motherboard as the storage is back to 11 GB.
Thank you all for your help along the way!
Español:
Tuve un problema similar con mi Note. Ayer instalé la versión XXLSA, andaba todo perfecto. Hoy prendo la radioy a los 5 minutos se reinicia y no inició mas!
--------
English:
I had a similar problem with my Note. Yesterday XXLSA installed version, he was all perfect. Today I turn on the radioy at 5 minutes and did not initiate restarts more!

Xperia x8 Kernel logo stuck

Phone : Xperia x8
The flashed kernel: http://forum.xda-developers.com/showthread.php?t=2136211
So after unlocking bootloader, i flashed that kernel.
I restarted phone and now "nAa Kernel" logo comes up, and i'm stuck there. My phone won't boot longer.
At bottom it says " CWM-based Recovery v6.0.2.8"
My phone won't connect to my computer either...
So what can i do? I tried to go into recovery but didn't work
Nothing happens when i press the back button...
Dude...this is your 3rd thread about this problem....
Use flashtool.....HOW?!
1.Turn off your phone
2.Open flashtool and select STOCK KERNEL to flash
3.FLASH
Tada...you are done...let me make a video tutorial for you
8cpaiw said:
Dude...this is your 3rd thread about this problem....
Use flashtool.....HOW?!
1.Turn off your phone
2.Open flashtool and select STOCK KERNEL to flash
3.FLASH
Tada...you are done...let me make a video tutorial for you
Click to expand...
Click to collapse
Where do i find the stock kernel..?
And to turn off my phone, i have to pull out the battery....
And when i insert the battery, phone boots automatically -.-
i am going to upload it in 30 minutes
---------- Post added at 11:35 PM ---------- Previous post was at 11:34 PM ----------
download from internet
8cpaiw said:
i am going to upload it in 30 minutes
---------- Post added at 11:35 PM ---------- Previous post was at 11:34 PM ----------
download from internet
Click to expand...
Click to collapse
Can't find stock kernel for xperia x8, searched on several places..
Daazion said:
Where do i find the stock kernel..?
And to turn off my phone, i have to pull out the battery....
And when i insert the battery, phone boots automatically -.-
Click to expand...
Click to collapse
Pull out battery and return it after 5 secs......after that GO IN FLASHMODE BEFORE PHONE STARTS!!!!
STOCK ROM and KERNEL
are flashed together
My internet is laggy now so search stock rom & kernel .ftf file in Gogeta's signature(Show content)
I need to make you a tutorial
@op
Why the hell you made 2 threads of same topic :banghead:
Sent from my X8
8cpaiw said:
Pull out battery and return it after 5 secs......after that GO IN FLASHMODE BEFORE PHONE STARTS!!!!
STOCK ROM and KERNEL
are flashed together
My internet is laggy now so search stock rom & kernel .ftf file in Gogeta's signature(Show content)
I need to make you a tutorial
Click to expand...
Click to collapse
FINALLY! Now my phone works... Was first time using flashtool, you got me hella knowledge outta this! Tyvm! :good:
I am glad that it helped....it would be nice to press the thanks button if i helped
---------- Post added at 09:48 AM ---------- Previous post was at 09:25 AM ----------
Now root phone,unlock bootloader....put custom ROM that requires nAa-005-jb kernel and put it on your SD card......flash nAa-005-jb kernel......go in recovery and install your rom....that is it
8cpaiw said:
I am glad that it helped....it would be nice to press the thanks button if i helped
---------- Post added at 09:48 AM ---------- Previous post was at 09:25 AM ----------
Now root phone,unlock bootloader....put custom ROM that requires nAa-005-jb kernel and put it on your SD card......flash nAa-005-jb kernel......go in recovery and install your rom....that is it
Click to expand...
Click to collapse
So first root phone, then unlock bootloader, then Put custom room, like mincm10? Then i flash the kernel?
I need to install recovery or something?
go back to STOCK ROM & KERNEL.......just flash STOCK ROM(and stock kernel will be flashed with stock rom)
root phone then check is bootlaoder unlocked
**nAa-005-jb kernel is used to run JellyBean rom
IF BOOTLOADER IS LOCKED then UNLOCK IT and do 1st step
||
\ /
1. if BOOTLOADER IS UNLOCKEDthen put your rom on sd card(need to put Jellybean rom that requires nAa-005-jb kernel in order to run) and then turn off your phone and flash nAa-005-jb kernel form recovery install rom
2. turn on phone and enter recovery(by clicking BACK button when you see the circle and nAa inside)
8cpaiw said:
go back to STOCK ROM & KERNEL.......just flash STOCK ROM(and stock kernel will be flashed with stock rom)
root phone then check is bootlaoder unlocked
**nAa-005-jb kernel is used to run JellyBean rom
IF BOOTLOADER IS LOCKED then UNLOCK IT and do 1st step
||
\ /
1. if BOOTLOADER IS UNLOCKEDthen put your rom on sd card(need to put Jellybean rom that requires nAa-005-jb kernel in order to run) and then turn off your phone and flash nAa-005-jb kernel form recovery install rom
2. turn on phone and enter recovery(by clicking BACK button when you see the circle and nAa inside)
Click to expand...
Click to collapse
Tyvm! I used this rom http://forum.xda-developers.com/showthread.php?t=1836116
Phone is working now, and it looks hella better! :victory:
Press THANKS button if i helped.....Finally it's working yeey

Sony Xperia SP Jellybean 4.3 hard? BRICKED

Hi!
I have a Sony Xperia SP, and it was buggi and slow so i wanted to install cm12. After installing it said that i installed successfully bot the phone never booted again, so i reinstalled the custom sony rom. Something went wrong during reinstalling, and it aborted. Now the phone is stuck in a bootloop. At startup the sony logo appears, than the phone reboots. I think it's hardly bricked because:
-The phone is in bootloop.
-I cannot access recovery mode, because during rom reinstalling i lost my root privilege.
-Sony pc companion does not recognize my phone.
-When i try to flash the stock kernel on the phone, with flashtool (phone connected in flash mode), the phone always disconnects at Dumping TA partition 2.
-Cannot connect the phone in fastboot mode (not working with the right gutton combination).
-No software recognize my phone, just flashtool.
-ADB drivers didn"t work.
I tried everithing on win10, win7 and ubuntu 14.04 that i coud find on the internet.
Should i throw it down from a cliff, of you guys have any idea?
Try to flash your phone via flashtool v0.9.8.16
I can't beacuse flashing always aborts, as i wrote.
have you tried flashtool-0.9.18.6
New flashtool versions are different than old ones and do not work well at all, at least for me not
Good luck
---------- Post added at 09:30 PM ---------- Previous post was at 09:28 PM ----------
Be sure to install drivers first and even test the flashmode before flashing anything if flashtool, to be sure that windows will not start to search windows update for drivers.
Oh GOD THANK YOU!!
It worked with flashtool 0.9.08.6 and now its working again.
Thanks agais!!! <3 :highfive:
Hai menyus same as you I have Sony Xperia sp c5302 with unlocked bootloader, I need to change JB to cm12.1. Please share procedure to Install cm12.1. Thanks
---------- Post added at 08:08 AM ---------- Previous post was at 08:07 AM ----------
menyus said:
Oh GOD THANK YOU!!
It worked with flashtool 0.9.08.6 and now its working again.
Thanks agais!!! <3 :highfive:
Click to expand...
Click to collapse
Hai menyus same as you I have Sony Xperia sp c5302 with unlocked bootloader, I need to change JB to cm12.1. Please share procedure to Install cm12.1. Thanks
mahesvr said:
Hai menyus same as you I have Sony Xperia sp c5302 with unlocked bootloader, I need to change JB to cm12.1. Please share procedure to Install cm12.1. Thanks
---------- Post added at 08:08 AM ---------- Previous post was at 08:07 AM ----------
Hai menyus same as you I have Sony Xperia sp c5302 with unlocked bootloader, I need to change JB to cm12.1. Please share procedure to Install cm12.1. Thanks
Click to expand...
Click to collapse
Hi
You have to download towel root, to root 4.3, and install supersu to grant access. Then you have to install CWM. You can find instructions for that if your search how to root sony xperia sp. If your bootloader can be unlocked you can download and install the zip from cm site. If you can not unlock bootloader, you have to download and install something like ****UNOFFICIAL-lbhuashan.zip and thats gonna work. Cm11 and 12 works well on my device.
Good luck

Bootloop Problem after flashing stock rom via SP TOOL

I tried flashing stock rom in my lenovo A7000a with lollipop version via SP Flash tool but it stuck in bootloop. Then i installed twrp recovery and root it and flash a custom rom "Androim 7" by thinking that it will solve my problem but it didn't. It still get stuck in bootloop. When it get first boot up in custom rom, for first time bootanimation get change a littel and then it get stuck again and every time i flash stock rom or custom rom it get stuck at bootanimation.
Did u enable da/dl with all checksum in spft?if not u must reflash it again with stock rom after enabling them in spft thats it ????????.???? :highfive:
Hit thanks if i helped
Yes, I have checked da dl all checksum in option->download
Then possible it maybe the problem with the stock rom/scatter that u used.try downloading another stock rom with its scatter.it may help
aswinp222 said:
Then possible it maybe the problem with the stock rom/scatter that u used.try downloading another stock rom with its scatter.it may help
Click to expand...
Click to collapse
I did try it by download another stock rom from *Flashing Stock Rom Via SP Flash Tool[Lenovo A7000] by*PrashantRana
But it gets into bootloop.
If bootanimation appears,dont worry just wait for long time.try rebooting with battery replacement etc:both stock and androium takes a hell lot of time to boot for first time.or else you may try flashing CM roms or the nexus MM minimal ported by myself.the wont take much time to boot up :cheers
aswinp222 said:
If bootanimation appears,dont worry just wait for long time.try rebooting with battery replacement etc:both stock and androium takes a hell lot of time to boot for first time.or else you may try flashing CM roms or the nexus MM minimal ported by myself.the wont take much time to boot up :cheers
Click to expand...
Click to collapse
I did as you said above and i downloaded cm13 and istalled it but it didnt work. I have uploaded a video see it. For first time i installed cm13 it goes to cm13 boot animation but in another boot it didnt go to cm13 boot animation. I have provided a video. Have a look.
In fact your phone is a7000a or is it a7000 plus?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
Which are the fields that you wiped before flashing the rom?
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
In spft which option did u chose?download only/firmware upgrade/format all???
aswinp222 said:
In fact your phone is a7000a or is it a7000 plus?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
Which are the fields that you wiped before flashing the rom?
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
In spft which option did u chose?download only/firmware upgrade/format all???
Click to expand...
Click to collapse
Both are same. A7000a is the model number and Lenovo A7000 Plus is official name of the Device.
I have tried two methods.
1st Method.
First I flash stock rom then I wipe data/cache/dalvik-cache.
2nd Method
I did same as above in this method but I wipe data/system/cache/dalvik-cache.
I have tried two method
1. Dowload only
2. Firware Upgrade
Third method format all didnt didnt work.
It shows some error.
A7000 and a7000plus are not the same.they got different architecture and kernel.a7000 got a 1.5ghz cpu whereas a7000plus got 1.5ghz,resembling to k3note.make sure you flash the proper firmware.choose firmware upgrade in spft.also i recomment flashing recovery only after first boot.if bootanimation appears it is likely to boot.
aswinp222 said:
A7000 and a7000plus are not the same.they got different architecture and kernel.a7000 got a 1.5ghz cpu whereas a7000plus got 1.5ghz,resembling to k3note.make sure you flash the proper firmware.choose firmware upgrade in spft.also i recomment flashing recovery only after first boot.if bootanimation appears it is likely to boot.
Click to expand...
Click to collapse
Heyy, i got boot up but It again gets reboot and and then its goes to loop. I think the problem is in Cpu Governer. So is there a way to fix cpu frequency?
just ttry flashing daredevil kernel.it got some patches for the same i hope.but i dont think that it helps.give out a try though.
aswinp222 said:
just ttry flashing daredevil kernel.it got some patches for the same i hope.but i dont think that it helps.give out a try though.
Click to expand...
Click to collapse
But the kernel is for marshmallow and my phone has lollipop
Does it wok with Cm13

Categories

Resources