Phone : Xperia x8
The flashed kernel: http://forum.xda-developers.com/showthread.php?t=2136211
So after unlocking bootloader, i flashed that kernel.
I restarted phone and now "nAa Kernel" logo comes up, and i'm stuck there. My phone won't boot longer.
At bottom it says " CWM-based Recovery v6.0.2.8"
My phone won't connect to my computer either...
So what can i do? I tried to go into recovery but didn't work
Nothing happens when i press the back button...
Dude...this is your 3rd thread about this problem....
Use flashtool.....HOW?!
1.Turn off your phone
2.Open flashtool and select STOCK KERNEL to flash
3.FLASH
Tada...you are done...let me make a video tutorial for you
8cpaiw said:
Dude...this is your 3rd thread about this problem....
Use flashtool.....HOW?!
1.Turn off your phone
2.Open flashtool and select STOCK KERNEL to flash
3.FLASH
Tada...you are done...let me make a video tutorial for you
Click to expand...
Click to collapse
Where do i find the stock kernel..?
And to turn off my phone, i have to pull out the battery....
And when i insert the battery, phone boots automatically -.-
i am going to upload it in 30 minutes
---------- Post added at 11:35 PM ---------- Previous post was at 11:34 PM ----------
download from internet
8cpaiw said:
i am going to upload it in 30 minutes
---------- Post added at 11:35 PM ---------- Previous post was at 11:34 PM ----------
download from internet
Click to expand...
Click to collapse
Can't find stock kernel for xperia x8, searched on several places..
Daazion said:
Where do i find the stock kernel..?
And to turn off my phone, i have to pull out the battery....
And when i insert the battery, phone boots automatically -.-
Click to expand...
Click to collapse
Pull out battery and return it after 5 secs......after that GO IN FLASHMODE BEFORE PHONE STARTS!!!!
STOCK ROM and KERNEL
are flashed together
My internet is laggy now so search stock rom & kernel .ftf file in Gogeta's signature(Show content)
I need to make you a tutorial
@op
Why the hell you made 2 threads of same topic :banghead:
Sent from my X8
8cpaiw said:
Pull out battery and return it after 5 secs......after that GO IN FLASHMODE BEFORE PHONE STARTS!!!!
STOCK ROM and KERNEL
are flashed together
My internet is laggy now so search stock rom & kernel .ftf file in Gogeta's signature(Show content)
I need to make you a tutorial
Click to expand...
Click to collapse
FINALLY! Now my phone works... Was first time using flashtool, you got me hella knowledge outta this! Tyvm! :good:
I am glad that it helped....it would be nice to press the thanks button if i helped
---------- Post added at 09:48 AM ---------- Previous post was at 09:25 AM ----------
Now root phone,unlock bootloader....put custom ROM that requires nAa-005-jb kernel and put it on your SD card......flash nAa-005-jb kernel......go in recovery and install your rom....that is it
8cpaiw said:
I am glad that it helped....it would be nice to press the thanks button if i helped
---------- Post added at 09:48 AM ---------- Previous post was at 09:25 AM ----------
Now root phone,unlock bootloader....put custom ROM that requires nAa-005-jb kernel and put it on your SD card......flash nAa-005-jb kernel......go in recovery and install your rom....that is it
Click to expand...
Click to collapse
So first root phone, then unlock bootloader, then Put custom room, like mincm10? Then i flash the kernel?
I need to install recovery or something?
go back to STOCK ROM & KERNEL.......just flash STOCK ROM(and stock kernel will be flashed with stock rom)
root phone then check is bootlaoder unlocked
**nAa-005-jb kernel is used to run JellyBean rom
IF BOOTLOADER IS LOCKED then UNLOCK IT and do 1st step
||
\ /
1. if BOOTLOADER IS UNLOCKEDthen put your rom on sd card(need to put Jellybean rom that requires nAa-005-jb kernel in order to run) and then turn off your phone and flash nAa-005-jb kernel form recovery install rom
2. turn on phone and enter recovery(by clicking BACK button when you see the circle and nAa inside)
8cpaiw said:
go back to STOCK ROM & KERNEL.......just flash STOCK ROM(and stock kernel will be flashed with stock rom)
root phone then check is bootlaoder unlocked
**nAa-005-jb kernel is used to run JellyBean rom
IF BOOTLOADER IS LOCKED then UNLOCK IT and do 1st step
||
\ /
1. if BOOTLOADER IS UNLOCKEDthen put your rom on sd card(need to put Jellybean rom that requires nAa-005-jb kernel in order to run) and then turn off your phone and flash nAa-005-jb kernel form recovery install rom
2. turn on phone and enter recovery(by clicking BACK button when you see the circle and nAa inside)
Click to expand...
Click to collapse
Tyvm! I used this rom http://forum.xda-developers.com/showthread.php?t=1836116
Phone is working now, and it looks hella better! :victory:
Press THANKS button if i helped.....Finally it's working yeey
Related
I followed all the steps, my output on s1tool was almost identical, There were no errors at any point. Now, my phone is in a reboot loop. It shows the nAa kernel logo, then reboots. I can get into recovery, and all its functions seem to work.
i tested all kernel and i flashed back to SE stock and relock bootloader
and try again but i can't boot kernel
i unlock bootloader successfully
my problem too -.-
n1kolaa said:
my problem too -.-
Click to expand...
Click to collapse
we must find a way !!!why we can't use custom kernel ???
DEV help us help !!!
http://forum.xda-developers.com/showthread.php?t=1011071
give me a thanks , if i help you
---------- Post added at 11:26 AM ---------- Previous post was at 11:25 AM ----------
we can use custom kernel
n1kolaa said:
http://forum.xda-developers.com/showthread.php?t=1011071
give me a thanks , if i help you
---------- Post added at 11:26 AM ---------- Previous post was at 11:25 AM ----------
we can use custom kernel
Click to expand...
Click to collapse
you use it ?
you have my problem too and use this way and it works ?
i use it have no problem just falow totorial
sory for bed english
n1kolaa said:
i use it have no problem just falow totorial
sory for bed english
Click to expand...
Click to collapse
pls type here guide step .. step
1dowload fleshtool http://forum.xda-developers.com/showthread.php?t=920746 and rom image http://www.multiupload.com/XLV6AA41DB
2 open fleshtool , turn off phone set rom img to flesh , hold beck key and conect to usb and its done
i tried it but i have problem again
dowload PC Companion from se suite
Once downloaded and installed, launch it. Most probably it will download some updates. Then choose device updating and follow the instructions. As for flashing - the procedure with holidng back button is the same as with flashtool.
nikolaa if it's doesn't work i will kill you !!! lol i test it tonight
u are big noob or have hard brick
all working for me
be sure that you have a PC Companion in your computer and your phone detected
all thing is good i was very nooob !!!
pls close this froum
Hi there
Rooted my I9000 today and sorted out the 3e problem and installed CWM recovery. All problems averted thus far. Installed CM9, got to the start up screen and it said it needed a reboot. Since i clicked restart its been bootlooping.
I can't get it into recovery mode but i can get it in to download mode. Can anyone tell me (as i'm a massive noob) what i need to do to fix this simply?
Thoughts? Help?
Try to pull out battery for a few secand..insert back n enter recovery mode using 3 button combo..reflash cm9 rom n try to reboot..if happen again..revert back to stock rom..
---------- Post added at 04:02 PM ---------- Previous post was at 03:58 PM ----------
If u are 1st time flash to ics..it need to flash twice..first for flash ics recovery and second for flash ics rom..
Flash a ginger custom(with cwm) kernel through ODIN and reflash cm9 twice.
zodiaxe66 said:
Flash a ginger custom(with cwm) kernel through ODIN and reflash cm9 twice.
Click to expand...
Click to collapse
Could you direct me a ginger custom rom? sorry, i'm pretty useless
I can't get into recoverymode, only download mode...but odin doesn't seem to detect the phone in download mode....thoughts?
managed to get it back on
thanks for all the help lads!
please how to flash stunner 2 in my n7000 , i'm in ultimate rom v5.1
Ultimate already has a safe kernel. Boot into recovery and go to philz settings and choose clean before new rom install. Once done then install zip and choose the rom.
nokiamodeln91 said:
Ultimate already has a safe kernel. Boot into recovery and go to philz settings and choose clean before new rom install. Once done then install zip and choose the rom.
Click to expand...
Click to collapse
but they say that the phone must to be in cm10 and i tried to install cm10 attached in the rom thread and operation failed "install aborted"
You need to update philz kernel to 3.99 or above. Then it will work.. It's safe to install the rom when you have philz kernel.
nokiamodeln91 said:
You need to update philz kernel to 3.99 or above. Then it will work.. It's safe to install the rom when you have philz kernel.
Click to expand...
Click to collapse
i did as u say they tell operation aborted and tell me that message status 7
Download hydracore, go into recovery flash that (do not reboot) and go to advanced and reboot recovery... once you're in the new recovery do all the necessary wipes and install
https://sourceforge.net/projects/maxfuacm/files/Galaxy Note/MaxFu_HydraCore/n5.JBT/
Eng_sabba7 said:
i did as u say they tell operation aborted and tell me that message status 7
Click to expand...
Click to collapse
Also check the md5 of the downloaded rom. May be that is corrupt
nokiamodeln91 said:
Also check the md5 of the downloaded rom. May be that is corrupt
Click to expand...
Click to collapse
i tried to use another copy of ultimate rom .zip file and putting it in the memory card it work until finish setup rom :victory: put then device restart to recovery screen again i tried to select "reboot system now " put device restart again to recovery !!!!!!!!!!!!!!! wat to do friend
Boot into recovery recovery and do a factory reset. And then reboot.
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
So this time the flash finished well?
nokiamodeln91 said:
Boot into recovery recovery and do a factory reset. And then reboot.
---------- Post added at 06:05 PM ---------- Previous post was at 06:04 PM ----------
So this time the flash finished well?
Click to expand...
Click to collapse
i had select wipe data / factory reset >>> that operation finished then i restart device :crying: put it's show samsung screen then closed or restart then samsung screen then recovery screen again
Eng_sabba7 said:
i had select wipe data / factory reset >>> that operation finished then i restart device :crying: put it's show samsung screen then closed or restart then samsung screen then recovery screen again
Click to expand...
Click to collapse
U are an Indian the best in programming in all the world u must to have a solution
Ok go to recovery again and then to philz settings and choose clean before new rom install. Once that's done. Install the rom again and check.
nokiamodeln91 said:
Ok go to recovery again and then to philz settings and choose clean before new rom install. Once that's done. Install the rom again and check.
Click to expand...
Click to collapse
i did that before >>>> but will try again MANY THANKS FOR UR EFFORTS
Ok let's see what happens.
the same problem i despair <<<<<
Better now put the phone in download mode and flash a stock rom. If you choose ics then do not wipe on stock recovery.
flash by odin ???
???
---------- Post added at 07:54 PM ---------- Previous post was at 07:16 PM ----------
Download a stock rom. Follow this thread
http://forum.xda-developers.com/showthread.php?t=1424997
i mean flash rom using odin program ?
Yes. This way you will get back to factory settings.
Hi,
In my HTC One i've recentely obtained root permissions with this tool.
Then i've installed the Xposed Framework and the Modaco ToolKit.
No problem still now.
Later I've installed the Advanced Power Menu with Reboot Options v4
Can't boot the phone. (See attachment for a screen)
Any ideas?
i had same problem.
1-) Install clockworkmod with on-the-go support
2-) if you have on the go cable( if you dont have it then you cannot use this method), download a rom and copy to a usb flash disk.
3-) plug it to your phone with usb flash disk attached.
4-) boot into recovery
5-) select install zip from sd card, then select install from external sd card ( you have to wait about 30 seconds to phone identify your usb stick)
6-) flash your rom and enjoy!
it worked for me on ARHD 4.2...
fethi2 said:
i had same problem.
1-) Install clockworkmod with on-the-go support
2-) if you have on the go cable( if you dont have it then you cannot use this method), download a rom and copy to a usb flash disk.
3-) plug it to your phone with usb flash disk attached.
4-) boot into recovery
5-) select install zip from sd card, then select install from external sd card ( you have to wait about 30 seconds to phone identify your usb stick)
6-) flash your rom and enjoy!
it worked for me on ARHD 4.2...
Click to expand...
Click to collapse
I've CWM Touch installed on the phone, how can i go to it?
do you know it has on-the go support?
---------- Post added at 03:20 PM ---------- Previous post was at 03:19 PM ----------
http://forum.xda-developers.com/showthread.php?t=2173863
if you flashed from this thread yes it has.
fethi2 said:
do you know it has on-the go support?
---------- Post added at 03:20 PM ---------- Previous post was at 03:19 PM ----------
http://forum.xda-developers.com/showthread.php?t=2173863
if you flashed from this thread yes it has.
Click to expand...
Click to collapse
No,
ok accessed to bootloader/recovery, there is a way to restore the stock rom?
yes of course you can find the stock rom, but you wiil lose root and may lose your recovery
so you have to do it from scratch... i recommend flashing a custom rom.
rampo said:
Hi,
In my HTC One i've recentely obtained root permissions with this tool.
Then i've installed the Xposed Framework and the Modaco ToolKit.
No problem still now.
Later I've installed the Advanced Power Menu with Reboot Options v4
Can't boot the phone. (See attachment for a screen)
Any ideas?
Click to expand...
Click to collapse
This mod (APM) is for deodexed roms. It does not work with standard rom (odexed) even if it's rooted...As i understand!
Cheers
ouioui01 said:
This mod (APM) is for deodexed roms. It does not work with standard rom (odexed) even if it's rooted...As i understand!
Cheers
Click to expand...
Click to collapse
yes, i was on stock rom rooted. requires de-odexed rom
fethi2 said:
yes of course you can find the stock rom, but you wiil lose root and may lose your recovery
so you have to do it from scratch... i recommend flashing a custom rom.
Click to expand...
Click to collapse
Thanks, but where i can found the stock rom ?
there is a thread for this...
http://forum.xda-developers.com/showthread.php?t=2224752
Thanks, it worked
happy to see it worked...
enjoy ))
Unlocked BL and flashed unsecure boot and CWM (6.0.2.8)
Now I keep getting CWM every time I choose reboot system now or hold power button.
Anyone help??
Do I have to flash a new Rom?? I am still on stock
roy8846 said:
Unlocked BL and flashed unsecure boot and CWM (6.0.2.8)
Now I keep getting CWM every time I choose reboot system now or hold power button.
Anyone help??
Do I have to flash a new Rom?? I am still on stock
Click to expand...
Click to collapse
Go back to the CM guide and pay attention to the tutorial.
You need 6.0.3.1
Install ROM Manager.
---------- Post added at 01:26 AM ---------- Previous post was at 01:23 AM ----------
roy8846 said:
Unlocked BL and flashed unsecure boot and CWM (6.0.2.8)
Now I keep getting CWM every time I choose reboot system now or hold power button.
Anyone help??
Do I have to flash a new Rom?? I am still on stock
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2238040
RuedasLocas said:
Go back to the CM guide and pay attention to the tutorial.
You need 6.0.3.1
Install ROM Manager.
---------- Post added at 01:26 AM ---------- Previous post was at 01:23 AM ----------
http://forum.xda-developers.com/showthread.php?t=2238040
Click to expand...
Click to collapse
Cheers but a good ol hold of power button and it booted fine
I now have the quoted CWM and CM though