Related
Can the "old-tv" screen animation be ported to cm6 ?
It has been tried earlier. It seems to be very difficult.
Sent from my A853 using Tapatalk
sileshn said:
It has been tried earlier. It seems to be very difficult.
Sent from my A853 using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply. All in all gingerbread is great but to my personal experience it's not that snappy like froyo. I'm using launcher pro plus as home replacement and in froyo I managed to set it so I wont get redraws when closing the browser or other application that needs a lot of ram.
Note: I disabled JIT
In gingerbread with the same settings of launcher pro I get redraws. I tried with jit disabled, enabled, vmheap 32,40 and it's the same.
Is it something that I'm missing out?
If it werent for this everything would be great about this rom!
Yes. I agree. I do not see much advantage in using GB to Froyo as of now. If only we could port the screen off CRT animation to Froyo, it would have been great. But it seems to be built deep into the framework. Check this link.
I had the problems you mentioned with the CM7 alpha release and IceandFire ROM.
Whereas on Shadowmod and Hobomod , the phone is seriously zippy! The latter being slightly better!
sileshn said:
Yes. I agree. I do not see much advantage in using GB to Froyo as of now. If only we could port the screen off CRT animation to Froyo, it would have been great. But it seems to be built deep into the framework. Check this link.
Click to expand...
Click to collapse
Thanks...Let me check it.
bloodhawk said:
I had the problems you mentioned with the CM7 alpha release and IceandFire ROM.
Whereas on Shadowmod and Hobomod , the phone is seriously zippy! The latter being slightly better!
Click to expand...
Click to collapse
Really. I will try them and report back later No need to wipe anything when moving from CM7 to Shadow or Hobo right?
A full Data/factory reset is advised at least thats what i did.
I did 2 Wipes from the stock recovery and then 3 wipes from Androiddiani OR 3.3.
vladstercr said:
Thanks...Let me check it.
Really. I will try them and report back later No need to wipe anything when moving from CM7 to Shadow or Hobo right?
Click to expand...
Click to collapse
I would reccomend wiping before moving to either rom (just to be safe), though you won't need a wipe for moving between my mod and shadow and vice versa.
Also, if you can wait about 7 hours, I should have a new version of hobomod up
Sent from my A853 using XDA App
mystichobo said:
I would reccomend wiping before moving to either rom (just to be safe), though you won't need a wipe for moving between my mod and shadow and vice versa.
Also, if you can wait about 7 hours, I should have a new version of hobomod up
Sent from my A853 using XDA App
Click to expand...
Click to collapse
good...i will wait for yours then!
It seems that the guys dont work anymore on putting the CRT animation into FROYO. I mean it would be great but it's pretty difficult to do it because it's very well coded inside the framework, something like that.
Froyo? Wait a minute... Oh, yes Froyo! You mean that ancient Android version that will not receive any more fixes and enhancements... Hmm, Froyo. OK, enjoy it.
kabaldan said:
Froyo? Wait a minute... Oh, yes Froyo! You mean that ancient Android version that will not receive any more fixes and enhancements... Hmm, Froyo. OK, enjoy it.
Click to expand...
Click to collapse
Come on, Gingerbread is nowhere near perfect yet on Milestone
As for animations, everyone who attempted it indeed failed, its probably possible but hard.
kabaldan said:
Froyo? Wait a minute... Oh, yes Froyo! You mean that ancient Android version that will not receive any more fixes and enhancements... Hmm, Froyo. OK, enjoy it.
Click to expand...
Click to collapse
what fixes or enhancements to further receive Froyo! You made it fly It cant get any better than is! Thank You!
kabaldan said:
Froyo? Wait a minute... Oh, yes Froyo! You mean that ancient Android version that will not receive any more fixes and enhancements... Hmm, Froyo. OK, enjoy it.
Click to expand...
Click to collapse
hahaha, I wish XDA had a "Like" button.
kabaldan said:
Froyo? Wait a minute... Oh, yes Froyo! You mean that ancient Android version that will not receive any more fixes and enhancements... Hmm, Froyo. OK, enjoy it.
Click to expand...
Click to collapse
Touché!
SENT FROM MY MILESTONE POWERED BY GINGERBREAD
Hello all,
This is my first ROM for the LG Optimus 2x
I am only 14, so i think i am one of the youngest devs here
If you like my work, please donate/thank me
I hope you all enjoy!!!!!
If someone could please post some screenshots, that would be great!!!! Because my Optimus 2x is under repair right now due to the fact that my baby cousin threw it on the ground
This ROM is super fast and stable!!!! I will be releasing more mods and updates as I work on them!!!
ENJOY!!!!!!
quick rundown:
Wipe ROM
EXT4 FILE SYSTEM
MoDaCo Kernel R4/5
Custom Widgets tweaked by me
left out some bloatware apps
Stock theme
Nexus S sound pack
Download link: V1.3: http://www.mediafire.com/?8i16bt6xp1acmxz
You do this knowing all risks involved with flashing a ROM.
I am not responsible if your phone bricks, dies, moves out, throws you out of the house or anything else that you can think of.
THIS ROM WILL LOOK VERY STOCK, BUT I HAVE TWEAKED IT TO RUN MUCH FASTER!!!!!!! MORE MODS COMING SOON!!!!!!!!!!!
will try thnks
reserved for future use
Kickasskev said:
will try thnks
Click to expand...
Click to collapse
ahhhh, you beat me!!
JGW310 said:
ahhhh, you beat me!!
Click to expand...
Click to collapse
LOL sorry man
What is the Kernal spec??
If u need that second space let me know what u want there and I'll post it
Kickasskev said:
LOL sorry man
What is the Kernal spec??
If u need that second space let me know what u want there and I'll post it
Click to expand...
Click to collapse
i dont need it you were just really fast lol
kernel is Modaco R4/5
Ok, so features? Or is it just a MCR bake, like most other ROMs here, or have you actually made any changes? And why MCK r4?
kruppin said:
Ok, so features? Or is it just a MCR bake, like most other ROMs here, or have you actually made any changes? And why MCK r4?
Click to expand...
Click to collapse
it is very basic, but i have made a few touchwiz mods to help this rom run along a little smoother.... i also am going to be releasing more mods to come
as i said, it is very basic looking, as of now, but pretty soon, it will look SIIKKKK
feedback :
-force close at settings, fix permission doesn't fix it
-radio not working(maybe incompatible lg-ril)
AWesome. Just what we need. More devs for O2X. Welcome on aboard.
I get bootloop, done a complete wipe aswell :-(
Kickasskev said:
I get bootloop, done a complete wipe aswell :-(
Click to expand...
Click to collapse
Hmmmm, I will look in to this. I apologize. I hope you had a backup
yeah backed up before hand, from previous bad experiences.
Hope you get it sorted
Edit :-
How come you are using a O2x in america I thought that you guys had the G2X???? Or are they both avaliable
Kickasskev said:
yeah backed up before hand, from previous bad experiences.
Hope you get it sorted
Edit :-
How come you are using a O2x in america I thought that you guys had the G2X???? Or are they both avaliable
Click to expand...
Click to collapse
I bought an O2x off eBay. But the G2x is what we have.
UPDATE: looks like something went wrong in the framework i will try and figure this out, in the meantime, go flash some other rom that actually works!!!!
Hi, I'm a bit lost.
I'm wanting to have the CM7 for my LG Thrill. I'm not a fan of being an updater this, update that bull****.
I want a stable ROM, does anyone have a link to the LG Thrill Almost CM7?
I want a working CM7 build that I've not gotta worry about waiting every week to update.
I'm currently on Doomed Froyo & to add its my favorite ROM.
Yet, I'm tired of it after seeing no future ROM builds as of lately.
Has anybody any idea of what I can do? :/
Sent from a Doomed Optimus 3D
Hope this helps...
http://forum.xda-developers.com/showthread.php?t=1302162
When it does release in final Cyanogen 7.1 / 9.x (Maybe? Hopefully?) , definitely go with that
Soo, yeah.
iamsoawesome said:
Hope this helps...
http://forum.xda-developers.com/showthread.php?t=1302162
When it does release in final Cyanogen 7.1 / 9.x (Maybe? Hopefully?) , definitely go with that
Soo, yeah.
Click to expand...
Click to collapse
I just had a random reboot 45 mins after flashing this.
Sent from my Optimus 3D using xda premium
I am going to give it a run for a day see what happens.I'm about to grab another phone because lack of Roms for this phone.Maybe a skyrocket or vivid who knows.
Sent from my Optimus 3D using xda premium
Sorry man, worked with me no problem. If it does work as you want it to though, it's really not worth changing phones. I know this from experience. But if not, go for it.
Just flash the CM7 nightly. Any further flashing/installing you need to do is done without wiping anything. You simply download and install the zip through recovery. Everything stays absolutely the same as far as your apps and screens and setups.
I had problems with nightlys echos and a clicking noise.So far only had that one reboot,about to test the battery out.
Sent from my Optimus 3D using xda premium
Man phone did good today battery life wasnt good then I got home from work and phone kept rebooting wouldnt go to sleep acting crazy.Back to the nightlys.
Hello XDA world, i was wondering if there are any LG Thrill (Optimus 3D) Custom Roms for V20c. I've noticed a few for V21e but in using them on V20c Data is unavailable. So if anyone knows of any Lg Thrill Roms running V20c that would be great (other then cyanogenmod7, 3D apps are unavailable) so a working 03D rom with V20c, i'm sure it would be much appriciated for all us canadian users eh haha
ShellShock420 said:
Hello XDA world, i was wondering if there are any LG Thrill (Optimus 3D) Custom Roms for V20c. I've noticed a few for V21e but in using them on V20c Data is unavailable. So if anyone knows of any Lg Thrill Roms running V20c that would be great (other then cyanogenmod7, 3D apps are unavailable) so a working 03D rom with V20c, i'm sure it would be much appriciated for all us canadian users eh haha
Click to expand...
Click to collapse
I myself have a P925 on Rogers with the v20c baseband, and I have found that everything based on Cyanogenmod works really quite well. Some good ROMS include CyanogenMod(the original one) @ http://download.cyanogenmod.com/?type=stable&device=p920, MokeeOS @ http://forum.xda-developers.com/showthread.php?t=1917377, and the newly ported MIUI ROM @ http://forum.xda-developers.com/showthread.php?t=1917722.
I have also found that if you want a stock based ROM, Thrill Seeker @ http://forum.xda-developers.com/showthread.php?t=1779290 with the ThrillzGB kernel @ http://forum.xda-developers.com/showthread.php?t=1546103 works quite well as well.
Hope one of these meets your needs!
ShellShock420 said:
Hello XDA world, i was wondering if there are any LG Thrill (Optimus 3D) Custom Roms for V20c. I've noticed a few for V21e but in using them on V20c Data is unavailable. So if anyone knows of any Lg Thrill Roms running V20c that would be great (other then cyanogenmod7, 3D apps are unavailable) so a working 03D rom with V20c, i'm sure it would be much appriciated for all us canadian users eh haha
Click to expand...
Click to collapse
Oh man, you asked this question in the right time!
I just tried and confirm that Promethius and ThiaiZO3D ROMs work on my p925g with v20c... using bluekernel!
http://forum.xda-developers.com/showthread.php?t=1565432
I have both frequences working - WCDMA 850 and WCDMA 1900 with H full speed!
I just booted into CWM, wiped all/factory reset (did Titanium backup first), installed ROM and then kernel right away.
Hope you can enjoy your phone now!
Goldenmeadow said:
Oh man, you asked this question in the right time!
I just tried and confirm that Promethius and ThiaiZO3D ROMs work on my p925g with v20c... using bluekernel!
http://forum.xda-developers.com/showthread.php?t=1565432
I have both frequences working - WCDMA 850 and WCDMA 1900 with H full speed!
I just booted into CWM, wiped all/factory reset (did Titanium backup first), installed ROM and then kernel right away.
Hope you can enjoy your phone now!
Click to expand...
Click to collapse
gonna try it now bro thanks
ShellShock420 said:
gonna try it now bro thanks
Click to expand...
Click to collapse
Hey again, the link seems to be down, can you hook me up with one? and do i just copy the .zip to the root of my sd card and install in recovery/cwm mode?
ShellShock420 said:
Hey again, the link seems to be down, can you hook me up with one? and do i just copy the .zip to the root of my sd card and install in recovery/cwm mode?
Click to expand...
Click to collapse
SWEET seems to work perfect, other then when i press the back button it goes to the home screen launcher, how do i fix that
ShellShock420 said:
Hey again, the link seems to be down, can you hook me up with one? and do i just copy the .zip to the root of my sd card and install in recovery/cwm mode?
Click to expand...
Click to collapse
SWEET seems to work perfect, other then when i press the back button it goes to the home screen launcher, how do i fix that
ShellShock420 said:
SWEET seems to work perfect, other then when i press the back button it goes to the home screen launcher, how do i fix that
Click to expand...
Click to collapse
I guess you must've downloaded old version (current is 1.5) or version for Korean phone - model SU760 (it has only 3 buttons). Sorry can't post link now. Just search xda for blue kernel
Goldenmeadow said:
I guess you must've downloaded old version (current is 1.5) or version for Korean phone (it has only 3 buttons). Sorry can't post link now. Just search xda for blue kernel
Click to expand...
Click to collapse
yeah man i found blue kernel, and promethius rom V1.5 non wipe, i prob got the version for korean phone eh?
im guessing the 4 buttons work on yours, hook me up with what you downloaded
ShellShock420 said:
im guessing the 4 buttons work on yours, hook me up with what you downloaded
Click to expand...
Click to collapse
OK, I got home
Sorry, latest version is 1.2.0 and yes, all my 4 buttons work as should.
I downloaded kernel from this thread (first post):
http://forum.xda-developers.com/showthread.php?t=1565432
And link to the file (I copy/paste it from that thread - not sure if I can post it):
http://www.mediafire.com/?94tpv9i1p9b6ms1
I flashed ROM in CWM and then right away kernel. Only then rebooted.
Hope it helps.
i just tried another version of that rom, aswell as thriller and thiaiz and in each my back button is acting as the home button, very frustrating haha, such a small problem making me go back to stock rom
never seen your post i will try it now! thanks!
i tried your links, thats where i got my bluekernel from, is that whats affecting my buttons? i got v1.2, i guess it is the bluekernel due to thiaiz roms having the same problem as well as thriller 3.1, hmmmmm
ShellShock420 said:
never seen your post i will try it now! thanks!
i tried your links, thats where i got my bluekernel from, is that whats affecting my buttons? i got v1.2, i guess it is the bluekernel due to thiaiz roms having the same problem as well as thriller 3.1, hmmmmm
Click to expand...
Click to collapse
Yes, I use kernel from the link I posted and my back button works as should. In BlueKernel thread was discussion about back button and latest kernel should fix it...
Did you wipe/factory reset in CWM first? I also did Dalvik cashe wipe. May be you should ask about back button in kernel thread...
Did you try installing Promethius ROM first, then booting into ROM, setting everything (test buttons), and then rebooting into CWM again and installing kernel without factory reset?
Sorry...
Can anyone tell me if its possible to get data network on thrill.
there might be, but unless someone posts it actually working, dont use cm10. when i used it, i had signal the first time. however, after an hour or so, my phone randomly rebooted. after it turned back on, service was gone, and IT KEPT rebooting every 2 minutes or so. also, same goes for jellybean and pacman
hummerh14 said:
Can anyone tell me if its possible to get data network on thrill.
Click to expand...
Click to collapse
It does works for the thrill. You just have to flash bernis u-boot and x-loader. I was using it on my v20p thrill. I switch back to GB because people on the other end of the phone were hearing an echo. If you can live with that it works fine. Just go to the o3d development threads there is a thread that explains how to install everything.
Sent my from nook tablet using android 4.2.1 jb /cm10.1 rom.
billy8362 said:
It does works for the thrill. You just have to flash bernis u-boot and x-loader. I was using it on my v20p thrill. I switch back to GB because people on the other end of the phone were hearing an echo. If you can live with that it works fine. Just go to the o3d development threads there is a thread that explains how to install everything.
Sent my from nook tablet using android 4.2.1 jb /cm10.1 rom.
Click to expand...
Click to collapse
Hey thanks for the response do you think u can link me to the guide for this. To tell the truth this phone has alot of potential just no one who wants to build ice also what do u mean jellybean does that mean there's a jellybean for o3d.
hummerh14 said:
Hey thanks for the response do you think u can link me to the guide for this. To tell the truth this phone has alot of potential just no one who wants to build ice also what do u mean jellybean does that mean there's a jellybean for o3d.
Click to expand...
Click to collapse
hey hummeh,
if it does work, another rom is called jellybam you could try it out. it is an expansion from cm10
tang097 said:
hey hummeh,
if it does work, another rom is called jellybam you could try it out. it is an expansion from cm10
Click to expand...
Click to collapse
have you tried this rom looks amazing but im sort afraid to try it because most roms never seem to work for me.
hummerh14 said:
have you tried this rom looks amazing but im sort afraid to try it because most roms never seem to work for me.
Click to expand...
Click to collapse
i've tried it in the past. it would work the first time, yet when i reboot, i would lose all sort of network and reboot randomly. however, its the same as cm10. so if cm10 works for you, this should work as well
Hey do u have working flash in that ROM u suggested on the other forum.
Sent from my LG-P925 using xda app-developers app
Sent from my LG-P920 using xda app-developers app
Is CM10 critical for you?
Because I installed ICS port by XBSA, samno kernel and v20c baseband and it's amazing, like new phone! (in Canada)
You can find all info in Optimus 3D development section. Our phones are EXACTLY the same, just different basebands. With v20c I have 3G/H in WCDMA 850 and WCDMA 1900.
It's challenging process but it worth it. I can help.
Good luck!
Does the back and search button work because other than that I don't really want it.
hummerh14 said:
Does the back and search button work because other than that I don't really want it.
Click to expand...
Click to collapse
Yes, buttons work as suppose to IF you install custom kernel on top of ROM. I use one made by samno (lots of settings too):
http://forum.xda-developers.com/showthread.php?t=2077071
Hope it will help.
Good luck!
OK what phone do u have a lg thrill or optimus 3d also I heard the back and search button doesn't work with lg thrill and if i t does work do u want to help me.
Ok, my phone was originally LG-P925g with Rogers (Canada) - I'm not sure if it was officially called Thrill since I bought it used. Then I read and realized that it's absolutely the same phone as Optimus 3D (920).
So for last year I was using Prometheus ROM with iBluekernel.
Then I decided to try ICS port from XBSA. And it worked. Lots of hoops to go thrugh but works.
Then I put kernel made by samno (in 3D development section) and that kernel solved button issue. But I got another one - at home I could connect to wifi but couldn't go past router. So today I flashed kernel made by iodak and am happy surfer.
If you just flash xbsa port you will have all 4 buttons, but BACK button works as HOME and SEARCH as BACK. HOME is HOME and SETTINGS is SETTINGS.
I hope it helps.
hummerh14 said:
OK what phone do u have a lg thrill or optimus 3d also I heard the back and search button doesn't work with lg thrill and if i t does work do u want to help me.
Click to expand...
Click to collapse
Goldenmeadow said:
Ok, my phone was originally LG-P925g with Rogers (Canada) - I'm not sure if it was officially called Thrill since I bought it used. Then I read and realized that it's absolutely the same phone as Optimus 3D (920).
So for last year I was using Prometheus ROM with iBluekernel.
Then I decided to try ICS port from XBSA. And it worked. Lots of hoops to go thrugh but works.
Then I put kernel made by samno (in 3D development section) and that kernel solved button issue. But I got another one - at home I could connect to wifi but couldn't go past router. So today I flashed kernel made by iodak and am happy surfer.
If you just flash xbsa port you will have all 4 buttons, but BACK button works as HOME and SEARCH as BACK. HOME is HOME and SETTINGS is SETTINGS.
I hope it helps.
Click to expand...
Click to collapse
So what r u using and how r the buttons also what kernel did u flash that has working WiFi and buttons.
hummerh14 said:
So what r u using and how r the buttons also what kernel did u flash that has working WiFi and buttons.[/QUOTE
Can you help me upgrade to that because im sick of the cm10 breaking wifi and the battery life is terrible
Click to expand...
Click to collapse