Hello guys..i galaxy s was running darkys rom 10.2 re,based on android 2.3.4 yesterday i flashed ICS (cyanogen9) from sd card.,i did nandroid backup of darky rom.ICS insallation suceed,so i was runing ics without problems.then i wanted to go back to the darky rom,so i enter recovery and i chose my rom backup in restore menu...then i get "no bootloader" "no files found" so i wanted to reboot (back to ICS) but i stuck on samsung i9000 screen.i CAN NOT enter recovery,only download mod
What i have to flash?can i use odin if i was on cyanogen??im quite scared because when i stuck on that samsung screen in the past,i had recovery..
Lawrrer said:
What i have to flash?can i use odin if i was on cyanogen??im quite scared because when i stuck on that samsung screen in the past,i had recovery..
Click to expand...
Click to collapse
u can always flash stock rom with odin..
u can flash darky re again through odin tick repatition pit ,pda start should work, check out darkyrom you will get some answers there or totallydubbedhd or puggerduk helped me out
Related
Dear all i have a serious problem, i downloaded a custom rom which was darky 8.1 then i was trying to go back to my custom rom and flashed as usual through oden, after i flashed the phone doesn't want to reboot at all and keeps vibrating, kindly help what should i do, and did i brake my phone? please help
try flashing back to stock ROM by entering download mode using Odin. after d stock ROM is succesfully flashed wit Odin flashing software u install clockwork recovery and then flash Darky's v8.1 ROM again in CWM. it should nt create any prblem.
paarry said:
try flashing back to stock ROM by entering download mode using Odin. after d stock ROM is succesfully flashed wit Odin flashing software u install clockwork recovery and then flash Darky's v8.1 ROM again in CWM. it should nt create any prblem.
Click to expand...
Click to collapse
it probably would again
why the f* is NO ONE ON THIS forum capable of reading ?
1) flash back to stock via odin or heimdall
2) apply update.zip (clockworkmod / CWM)
3) then from there apply Darkys 8.0 (no-wipe or wipe)
4) Darkys 8.1 (no-wipe)
then it should work
thanks all for your reply
Thanks for indicating it. i ll b more clear nxt time. thnks zacharias.maladroit
I'm stuck in a strange problem on my Galaxy S I9000
i'm running firmware 2.3.3 gingerbread JPJV6
it is rooted
i installed rom manager
i hit Flash clockworkmod recovery (on rom manager)
choosed my phone *samsung galaxys i9000*
downloded and installed successfully (alleged)
hit reboot to cwm recovery (on rom manager)
it reboot .. Android system recovery <3e>
and in red text (E:failed to verify whole-file signature "and" E:signature verification failed)
.............................
i don't know what's wrong here ... all i wanted to do is to apply updatefile.zip of cyanogen mod ....
..............................
i downloaded the updatefile of CWM and renamed to update.zip and tried to update from the android system recovery 3e it gave me same red error
..............................
can some one help me here please i'm stuck and don't know what to do .
I had some kind of this message one time, try to go in download mode to write again the PIT file.
i didn't understand what you mean by write again the PIT file .... you meant open odin3 get another PIT file ? or re-flash the gingerbread and then root it all over again ? you think this would fix anything ? i'm still confused not sure what to do
If you want CM, just flash custom kernel as a PDA in Odin. You will get CWM.
Then go to CM thread and follow instrcutions.
one last question ........ can you suggest a kernel to me .. I'm on rooted 2.3.3 gingerbread JPJV6 ..
3e is your problem, it only allows Samsung-signed packages. I'm using ChainFire's CF-Root kernel with stock JVT (until I get TeamHacksung's ICS working properly!)
A7madramadan said:
one last question ........ can you suggest a kernel to me .. I'm on rooted 2.3.3 gingerbread JPJV6 ..
Click to expand...
Click to collapse
Well, if you're going to CM, it is same what kernel to use when flashing CM. Just pick one up, like Semaphore, download it, put it in Odin as a PDA, flash it. Then you have CWM. In CM you can't use what ever kernel you want
thanks i'll download semaphore kernel and see what's gonna happen i appreciate your help here really
guyz plz help me
i have been using teamhacksung's ics port on my i9000
nd now..i updated it to build 12 and everything was fine
i just it for about 12-15 hrs
and then it restarted...and i was stuck in a bootloop
then i removed the battery and tried to open cwm
but still i was in a bootloop
then i flashed speedmod kernel...
and ws able to open clockworkmod...but it was 2.5.1.0 and not 5.5
And i am not able to flash any rom coz i get (status 7) error
plzz help me
plz
plz
plz
did u do a nandroid backup,you could also try darky 10.2 re im not sure if it will work because you were on ics,you could ask one of the darkycrew on the darkyrom forum goodluck
Flash this ROM (Its Froyo 2.2.1) using Odin:
http://dl.dropbox.com/u/665428/AndroidWorld/Herstelbestanden/I9000XXJPU.zip
Make sure repartitioning is checked in Odin
PIT: s1_odin_20100512.pit
PDA: I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
PHONE: MODEM_I9000XXJPU.tar.md5
CSC: GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Flash.
Now you're back at Froyo 2.2.1
If you want CWM back flash speedmod K13E using Odin (make sure repartition is unchecked)
Put it in PDA
Flash
Link:
http://forum.xda-developers.com/attachment.php?attachmentid=566807&d=1302623831
Now you can flash any Rom you want again
[Solved]
I flashed boot.img file using heimdall
and it is working fine once again
Thanks Valinorian,you help me to!
Hello guys!
Im new to the forum but i was using teamhacksungs ics port since middle of december from build 6 on to build 12 without any problems. but last weekend (my i9000 has been on build 13 for some days) i took a look on my phone to get the time and then i saw it was booting. but nothing happened it was stuck in a bootloop.
i removed the battery for some hours and tried to boot but it still gets a bootloop.
im not able to get into recovery mode, only downloadmode is possible.
help me plz, what can i do?
thx for your answers
greets steve
Look three posts above yours. It is explained in detail what to do.
Does anyone READ around here?
boot into download mode...and use heimdall to flash boot.img(in the teamhacksung's rom)(any build)
and then boot again...it will surely boot...
but i recommend onecosmic's ROM
but u did not do the process flashing back to 2.2.1?
I have never used heimdall and im a noob in flashing (it was easy with cwm recovery and the ics port)
thank you very much! i got it
The bootloop problem was covered several times - it happens kinda randomly, so the best workaround would be:
1. If you can boot into recovery - flash the same ROM again.
2. If not - go into download mode, flash stock ROM, install ICS again.
today i wanted to flash my galaxy s to ics.
my galaxy s was already rooted so i put the zip in the root of my phone.
so then i went to recovery mode and installed ics and im sure i followed every step in the tutorial. But when booting it didnt stop booting and it was like that for an hour. so then i tried to flash it back to the firmware i had before.
i tried to flash back to gingerbread with odin but now it cant boot beyond the galaxy s gt-19000 screen.
i tried to go to recovery mode but in recovery mode everywhere its saying
"E: unknown volume for path {/data}
E: unknown volume for path {/data}
E: Unable to process volume! Skipping..."
and so on...
please help me
the firmware i need ends with jvi thats all i remember...
dude u can get stock firmware from samfirmware.com,try flashing darkyrom 10.2 re it saved me acouple of times good luck
http://www.darkyrom.com/community/index.php
thank you for the answer ill try it
try going back to smthn like jvt or jw1 via odin and then if u want to flash ics follow the video on youtube by totallydubbedhd
You need to flash a rom stock using ODIN. If I understand correctly you must enable the option to re-partition so be sure to also include the .pit file when you will flash, then proceed to install ICS. It is recommended to remove the SD-EXT before starting to install because it can pass to enter a bootloop.
Hi guys
I really need you help...
I have a samsung Ace .. i had this rom: [ROM] [Stock] [Nims 11 Mem Hack / BE 1.6 Kernel] S'Perience ROM ®
with clockwork recovery and of course root
then i want to try the stock rom version 2.3.6 TPH (Portugal) .. I went to sammobile downloaded that rom and odin with ops... after all of the process the odin shows up the message "pass" with blue color but my phone was blinking.. and now it only does that, blinking.. i´m not able to enter on recovery mode or on the mobile itself... only able to get download mode..
Pleasee some help!
someone ?!
Try to install the CWM recovery for Odin: http://forum.xda-developers.com/showthread.php?t=1465599
And then a Custom ROM.
maniaczek1111 said:
Try to install the CWM recovery for Odin: http://forum.xda-developers.com/showthread.php?t=1465599
And then a Custom ROM.
Click to expand...
Click to collapse
I have already tried that without sucess .. After I install anything from odin it keeps blinking
AnonFreitas said:
I have already tried that without sucess .. After I install anything from odin it keeps blinking
Click to expand...
Click to collapse
pleaseeeee...
Reflash stock via odin. Your device mightn't boot for the first time. Then reconnect & reflash via odin right away. Your device will boot. If it doesn't, take off the battery & put it back, go to recovery mode & do a factory reset & reboot. It should work. But before doing all this, remember, close all the intervening programs like kies,etc & make sure you have the latest device drivers installed.
Sent from my GT-S5830 using xda premium