[BASEBAND] SmartFlash stock baseband release: 1035.21_20110725 (V20m version) - LG Optimus 2x

Managed to extract the baseband files from the KDZ upgrade, so here they are for your pleasure. Flash all four files in order from the largest to the smallest.
1. R375_SIC.fls
2. AENEAS_FW.fls
3. slb.fls
4. psi.fls
Please follow the instructions from Paul's thread here. You can also find the Smartflash tool and the drivers overthere.
To use P990 flash to flash this baseband:
Download the utility file from Paul's thread.
Download the driver file from Paul's thread.
Download the baseband file below
Run the SmartFlashTool_P990.exe application on your PC
Turn device off, remove battery, plug device in while holding volume down - you should see a software update message on screen and the COM port should be filled automatically in the flash application below after installing the drivers if required.
Select the 'ROM Copy D/L' tab
Ensure 'Normal Mode' is selected
Ensure 'Erase CAL' is NOT selected
Click the browse button next to 'CP Bin:' and select the baseband (FLS) file
Click 'Start' and wait for the flash to complete
Please follow the last 6 steps for each of the four files.
Download the 0725 baseband from v20m here (multiupload). RIL for v20m is here.
PLEASE MAKE SURE YOU UNDERSTAND YOU DO THIS AT YOUR OWN RISK, AND I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE.

Thanks! Where's ril file?
BR.

yukkio said:
Thanks! Where's ril file?
BR.
Click to expand...
Click to collapse
use this https://market.android.com/details?id=com.sibbor.getril&hl=en

But the baseband is the same as in V20L?!

+1
Flix123 said:
But the baseband is the same as in V20L?!
Click to expand...
Click to collapse
10 chars

Flix123 said:
But the baseband is the same as in V20L?!
Click to expand...
Click to collapse
yep..........20110725

shpapy said:
yep..........20110725
Click to expand...
Click to collapse
Could you share ril from your 20m rom?
Thanks.
BR.

Flix123 said:
But the baseband is the same as in V20L?!
Click to expand...
Click to collapse
v20l and v20m prove that if you do NOT use the baseband that comes with the release, you usually get Fastdormancy issues (the phone jumping from HSDPA back to UMTS). This causes batterylife to decrease... a lot. We found first first Topogigi's roms that flashing the baseband that comes with the specific releases fixes all of these issues and improves battery-life. So it might mean that there are tiny differences between basebands, even if they are all called 0725.
You can recognize the errors by looking on the command-line (easiest way to check this is with terminal emulator), popping to root with "su" and executing "logcat".
FD not activated
D/GsmDataConnectionTracker(25463): LGE_Fast_Dormancy) Set Timer to 1000
It should actually say it is activated, but you'll recognize that straight away when you see it. Try it, and if you get issues with v20m, make sure to flash this baseband. I for example installed the deodexed v20m, and when I did, I got many FD issues on the v20l baseband. Today I flashed the KDZ with baseband and I have not of these issues anymore.
If anybody could try to flash this baseband, flash the deodexed v20m from the german forum, and confirm it works now this should be the one to use.

You can find the ril for the v20m rom here, also added to first post.

yukkio said:
Could you share ril from your 20m rom?
Thanks.
BR.
Click to expand...
Click to collapse
http://www.multiupload.com/E1A2723BV4
ril for v20M

I flashed this BB an then copied the RIL but after that the radio stopped working (no coverage). GetRIL said that the v20m RIL was identical to v20L Italy open. I used the BB with other RILs and they worked.
edit: I checked logcat radio and found errors like this one: couldn't find rild socket retrying after timeout.

rottenpenguin said:
I flashed this BB an then copied the RIL but after that the radio stopped working (no coverage). GetRIL said that the v20m RIL was identical to v20L Italy open. I used the BB with other RILs and they worked.
edit: I checked logcat radio and found errors like this one: couldn't find rild socket retrying after timeout.
Click to expand...
Click to collapse
Hmm, weird. Sounds like a non-gb ril on a gb baseband, weird.

how do I install the RIL?
thanks

jrdaz said:
how do I install the RIL?
thanks
Click to expand...
Click to collapse
http://www.multiupload.com/5M2SD9YBU7

shpapy said:
http://www.multiupload.com/5M2SD9YBU7
Click to expand...
Click to collapse
Thank you. But still the questin stands . How to install the RIL?
You could use LG RIL application from Myrt to install RIL. Search market. Then copy the RIL to your sd card and allow the application to search RIL "Search Phone for RILs)".
Once find click on the desired RIL and reboot.

Hi!
I just wanted to update my BB. I flashed the 824, it wasn't good, so I flashed 823, but it wasn't good for me, and then I tried the v20m which is 4 separate files. When i flashed the first (the biggest .fls) my computer turned off... :S I thought i screwed up my phone, but it is working, it only doesn't ask my pin code.
When i try to flash it again with the smart flash it get time out error, the pic is attached.
What can I do besides send it back to LG and hope to repair it? :S
Thx in advance!
Update:
I solved the problem with flashing the v20m.kdz, following this tuto: http://forum.xda-developers.com/showthread.php?t=1327929
The first time it was a bootloop but i made a factory reset with: power button (hold)+vol down (hold). After the restart all is good.
Edit: Is there a v20m BB which is only one .fls? I almost bricked my phone while trying to flash the 4 file version... :S

I have these errors sometimes as well with the four files. Because it doesn't even start flashing it is not an issue. Just try again and mostly the second time it works fine again. Don't worry

Related

[Q] Phone Won't Detect SIM Card Anymore, No Signal

Hi Team!
So this is the story:
Got my unit
Flashed CM7
Got LG GetRil
Had 226(I think) RIL and xxx bb
Downloaded matching RIL (622 GB leak)
Worked fine
Changed Phone
Put Sim card back into my unit
Now it doesn't detect the SIM card, doesn't ask me for PIN, and just says no signal (duh)
Which means I can't flash the RIL back (if that is the issue)
What do I do?
Kind Regards
¨Neefy
Try a different BB/RIL, you probably have the unknown BB issue if you're using the 'gingerbread' 622.
Yeah that's the one! But how do I get a new one when I have no connection on the phone?
Steps would be appreciated
You do it all off the phone.
Have a read of this: http://android.modaco.com/topic/335494-12-aug-smartflash-stock-baseband-release-103521-20110725/
But don't I just have to change the RIL back without changing the BB? Without whiping my entire phone and such..
Er, I can't remember if that worked or not when I was in the same position, but you can try.
Temasek has a bunch of CWM flashable RIL's in his Mediafire folder: www.mediafire.com/temasek
Rusty! said:
Er, I can't remember if that worked or not when I was in the same position, but you can try.
Temasek has a bunch of CWM flashable RIL's in his Mediafire folder: www.mediafire.com/temasek
Click to expand...
Click to collapse
I love you.

LgG Optimus 2x No network service HELP!!!!

After custom ROM installation, the phone doesn't connect to Mobile network. Wi Fi is OK. I changed several Firmware (CM 7 etc.) it doesn't work on any.
Moreover I can't install anything through SmartFlash, always the same error:
Trying to communicate with IFX modem, and then - timeout error.
What can I do to fix it?!! (((
KDZ_FW updater also doesn't work.
The same with LG Mobile update
death27 said:
After custom ROM installation, the phone doesn't connect to Mobile network. Wi Fi is OK. I changed several Firmware (CM 7 etc.) it doesn't work on any.
Moreover I can't install anything through SmartFlash, always the same error:
Trying to communicate with IFX modem, and then - timeout error.
What can I do to fix it?!! (((
Click to expand...
Click to collapse
hi, i am italian, sorry for my bad english.. but, i buy a 2x an next to hour to the first boot the phone have this problem !
i have tried all possibility, tool lg, smarthflash (ifx modem timeout...) NvFlash... at the end the shop have changed me the phone with new phone and i resolved my problem
Possibly apn changed? Mine does this go to settings> wireless&networks> mobile networks> access point names> and choose your provider from list and exit to see if you have data.
Sent from my LG-P990 using xda premium
version of baseband ??
gabrielecif said:
version of baseband ??
Click to expand...
Click to collapse
"Baseband unknown"
I had the same problem and it's because the APN went missing.
Turn off automatic time and see what happens ....
gabrielecif said:
at the end the shop have changed me the phone with new phone and i resolved my problem
Click to expand...
Click to collapse
I don't know how can I change my phone which is rooted and with installed unofficial software
As for APN and automatic time, will try tomorrow.
Sounds like you got the unknown 622 GB leak, download the 622 Europe BB and flash it, then get LG GetRil and get the 622 RIL, there you go.
Have you payed your bill?
Sent from my LG Optimus 2x using XDA Premium App
Where I can get - "622 Europe BB" ?
Neefy said:
Sounds like you got the unknown 622 GB leak, download the 622 Europe BB and flash it, then get LG GetRil and get the 622 RIL, there you go.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1140182
This one?
Anyway Smartflash doesn't work with my phone.
death27 said:
Where I can get - "622 Europe BB" ?
Click to expand...
Click to collapse
http://www.mediafire.com/temasek
Here you go, p990 -> bb -> 622
Maybe you should try 0725 for me it works better than 0622. Much much better.
Sent from my LG-P990 using XDA App
death27 said:
"Baseband unknown"
Click to expand...
Click to collapse
the phone show the battery charge ??
Try to flash with smartflash a baseband (try the 622) if smarthflash get error "IFX modem timeout" gives up and ask to 'practical assistance for the warranty. I have tried everything and I had the same problem, but it was useless!
same issue
it was all fine and dandy and since the past week the same ****ing thing happens over and over again. I restore backups, flash basebands, delete cache, dalvik, it keeps on happening. It started after i applied the optimization pack by paul
So, finally I exchanged the phone under warranty.
Nothing helped to fix it. The phone shows baseband, battery charge. Everything looks fine, however it can't connect to network.
Now I have a new phone and don't have desire to flash it again )))
Try another usb port then try to smartflash. Perhaps reinstall your drivers

No Sim Detected LG Optimus 2x :(

Hi
My phone suddenly stopped detecting all sim cards ( I have tried various working sims ).
It is running CM 7.2 and has been running cm 7.2 for a few months with no problems.
Today I took out the sim and put it back in to reboot, all was fine. I went to shower, came back and the sim suddenly stopped being detected.
I have tried to google but it seems most problems are to do with flashing a new rom and having the sim not work, my case is that the rom has been the same for a few months.
I have tried to flash different roms and I still have the same problem. I have a gut feeling it is the hardware that reads the sim that is faulty.
I have read something about a baseband, I dont know what that is but if it helps, when i go to the settings and click on 'about phone'
It says there is a baseband and it is version something. There are no question marks or anything like that.
I appreciate the help and would love some more troubleshooting suggestions.
The worst case scenario is unrooting it, flashing stock rom and send it back to warranty. I actually don't know how to do that so if anyone has a guide lying around please link me on that.
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
asmerito said:
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
cimore000 said:
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
Click to expand...
Click to collapse
First you flash BB, then download RIL with GetRil. Read completely through BB sticky topic in development section. All answers are there.
http://forum.xda-developers.com/showthread.php?t=1658047
[Baseband][P990] Complete Baseband overview thread
Sent from my LG-P990 using xda app-developers app
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I checked the IMEI and it matches.
I have some extra information if it helps, when I choose a random RIL from getril, the battery might become a ? mark and the sim card not detected error doesnt show anymore, however when I put it back to the original RIL, my battery bar starts showing the 'power left' and also the sim not detecting error shows again.
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I get the SIM Toolkit Incompatible Handset error and then whether I press OK or Cancel, shortly after I lose mobile network access. I've been trying all manner of different things, Smart Flashing, NVflashing, changing basebands, Rils, you name it.
I'm currently on the V30B root ROM http://forum.xda-developers.com/showthread.php?t=2064793 and the Ril matches the baseband from that ROM, but that hasn't helped either. So I went and check the in phone and behind battery IMEI and they are different! I'd love to hear what your solution to this is!
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
My problem was no service and IMEI unknown... Never managed to solve it. Reverted to old bootloader and problem solved.
Sent from my LG-P990 using xda app-developers app
IMEI Solution
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
4) Install a program called Hyperterminal on your PC and open it. In COM settings select same port as in device manager -> LGE Mobile USB Seial Port (should be 115200)
5) Type at%imei and it should respond by saying OK
6) Now type at%imei and it should now display your current IMEI number.
7) Type at%imei=XXXXXXXXXXXXXXX where X is your original IMEI number.
8) Reset phone.
You might have to reboot your phone after step 3. But see if it works without.
I have been thinking that this is a hardware issue, I have not changed a single setting/rom/baseband at all, the sim just wasnt detecting when I came back to my phone. The rom and settings were the same for a number of months.
I am now going to give it in to warranty, however it only has 1 month left. I have tried to install the stock firmware but with no luck..
I found a rom to flash for my region, it is a zip file but when I try flash it with Clockworkmod, it says installation aborted....
Shouldnt I be able to flash the roms with CWM? The file is a zip file just like the CM7.2 rom I flashed. Do I need nvflash instead? I found the rom here :
http://forum.xda-developers.com/showthread.php?t=1852112 (the download links were removed so I googled the exact same rom)
I was also told that if I just use the LG update tool, it sohuld automatically update the phone to stock firmware AND unroot it, only that the update tool gives me an error. Whats the best approach guys?? I need to get this fixed before my warranty goes.
Custom40 said:
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu...
Click to expand...
Click to collapse
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
[-Stash-] said:
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
Click to expand...
Click to collapse
Trust me, you can try whatever you want. This is the only way to get it working. I spent hours and hours to figure this out, so I guarantee you it will work.
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
interr said:
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
Click to expand...
Click to collapse
Your imei should not show in settings, it should show in the back of your battery and when you dial : *#06# into the phone (where you dial numbers for calls).
Cant help you with baseband.
OP here, I am trying to unroot my phone and put stock firmware to get warranty to fix the simcard reader ( i believe it is a hardware issue ).
If I use nvflash and flash any stock firmware I can find on the internet, will that be OK? I have a feeling each region of optimus 2x has slight differences in firmware, eg swedish stock roms and australian stock roms may differ in the default applications etc.
Will it be ok to just install any kind of stock rom for my warranty? Help would be appreciated my warranty is running out in less than a month now.
I also tried to flash stock firmware with CMW, it didnt work. I am about to try NVflash, so I went into greater detail in page 1 but no one replied yet. If you guys know please help. I am more familiar with CMW than NVflash. I have not used NVflash yet.
hahah after 2 sleeples nights i menage to restore my sim to be recognize ,whit this metod,.. NFlash rulles ))
http://www.ibtimes.co.uk/articles/408044/20121124/unbrick-tool-lg-optimus-p990.htm
http://androidadvices.com/unbrick-lg-optimus-2x-p990-android-phone-tutorial/
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
this is also the best metod for unbricking your phone, .
INSTALLATION:
ATTENTION
The flasher with NVFlash clears all memory, including the Internal SD., so make a backup if u can..
Download this file: http://bayfiles.com/file/yKZL/eGZ31A/driver.rar The pack includes the APX driver (folder driver)
http://www.putlocker.com/file/4CEDEB7E0893B6F1
1.- Remove the battery to the phone.
2.- Press and hold Vol- and Vol+ and without releasing the 2 keys connect the USB cable to the PC
3.- Go to the progmaq-default-cm-10-20121105 folder and run flash icon... folow instruction., wait wait wait Enjoy!
Custom40 said:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
Click to expand...
Click to collapse
I managed to get an old CM7 install back on the p990,but the above is still not working for me :/
After I finish typing in 1809#*990# in dialer, nothing happens. If I press the green phone handset icon to dial that number it comes up with an error message of "Mobile network not available".
Any further advice? Thanks.
Okay, I failed at reading comprehension – it has to be an LG Gingerbread ROM for this code to work, NOT a CM-based one!
Trying one from somewhere-I-cannot-link-to-yet
Success! Once I was back on the original stock LG Gingerbread ROM, I could reset the IMEI and make/receive calls again using this method. Thank you very much!
Now all flashed back onto a nice "working" nightly CM10.1 and a very happy little device.
Many thanks all.
Hi,
Anyone have a working link to "progmaq-default-cm-10-20121105 ". My Optimus 2x has been bricked as well, and can't find any other version of this on Google unfortunately
Appreciate all help.

[Q] Full signal but not able to make calls HELP

Well i got a problem.
My LG optimus 2x doesn't want to make when it has full signal. And that's ONLY when it has full signal. As soon as I start calling it says call ended. Other people can't call me either. Everything else works fine from internet to messaging (receiving and sending). I have tried numerous basebands (0725 v20q, 0725 v10d, 0218 v10b) and the one I'm on now which is V30A.
I'm currently running stock LG 4.04.
I have tried the phone with a different sim and it still didn't make calls.
Switching to 2G or turning airplane mode on/off doesn't help neither doe turning on wcdma or gsm only signal.
I was installing the basebands with LG P990 All in one ToolKit.
ANY HELP GUYS.
Thanks
Switch to a custom rom ^^
Already tried it doesn't help. I will flash Avatar ROM again but first i want to fix this
Nobody knows? I don't think it hardware since the phone can make calls but only when its not on full signal.
Could it be IMEI problem?
Have you tried a different sim card?
Dial *#06# and see if your imei appears
IMEI problem what do you mean by that?
The IMEI does come up.
And yes i have tried different sim cards with the same result.
Does the displayed imei match with the one printed on the sticker under the battery?
Yep they match.
You have the problem which I had when I was using su660 basebands. As I see you were trying p990 basebands maybe you cold try a su660 baseband. Here's the su660 baseband with it's ril Flash the bb with smartflash, then if you are on stock or stock based rom copy the ril file to /system/lib and set the ril permisson to rw-r--r--
Will try. I'll post back if it works or not.
bitdomo said:
You have the problem which I had when I was using su660 basebands. As I see you were trying p990 basebands maybe you cold try a su660 baseband. Here's the su660 baseband with it's ril Flash the bb with smartflash, then if you are on stock or stock based rom copy the ril file to /system/lib and set the ril permisson to rw-r--r--
Click to expand...
Click to collapse
Looks like i can't past it inside /system/lib because it keeps saying that the system is read only.
Should i Flash Avatar ROM so I have full control?
michalrobeck said:
Looks like i can't past it inside /system/lib because it keeps saying that the system is read only.
Should i Flash Avatar ROM so I have full control?
Click to expand...
Click to collapse
Of course, flash avatar rom or any other which grant you root acces or just root your stock rom, but if you still have that problem without changing ril it just will be a worthless effort.
If you still have that problem try this. Maybe it wil help. I know it is for fixing some kind of wifi-mobileinternet transation thing, but you can give it a try, you will lose nothing. Read carefully the post. I think there is nothing to worry about. I perfomed erase CAL numerous times without no problem. I would recommend putty instead of Hyper Terminal.
same problem
i am also facing the same problem
rom:- tonyp v4
kernal pengus 124
on same kernal but tonyp v3 rom this problem use never occur if tony or any pro can help me out i love his rom
:good: tonyp
bitdomo said:
Of course, flash avatar rom or any other which grant you root acces or just root your stock rom, but if you still have that problem without changing ril it just will be a worthless effort.
If you still have that problem try this. Maybe it wil help. I know it is for fixing some kind of wifi-mobileinternet transation thing, but you can give it a try, you will lose nothing. Read carefully the post. I think there is nothing to worry about. I perfomed erase CAL numerous times without no problem. I would recommend putty instead of Hyper Terminal.
Click to expand...
Click to collapse
Just a quick question do you know what erase CAL does? can i use it while flashing a stock rom with baseband?
michalrobeck said:
Just a quick question do you know what erase CAL does? can i use it while flashing a stock rom with baseband?
Click to expand...
Click to collapse
Erase CAL deletes the calibration data in the radio. By radio I mean that part of the phone which is responsible for catch signal/network. When you perform Erase CAL you lose your IMEI, but you can restore, that forum link I sent describe it how to restore your IMEI after erase CAL.
Answer to your second question: You can only use erase CAL when you flash baseband, and you need stock rom to restore your IMEI.
Why you need stock rom? You need stock rom because it has Hidden menu which is missing from custom roms. Hidden menu is essential to restore your IMEI.
You can find your IMEI on your phone's box or on the sticker under your battery, or type *#06# in the dialer and it will show your IMEI.
I suffered from this problem when I installed Kaspersky Anti-Virus. It automatically enabled its filter and I couldn't make or receive calls, depsite the signal strength or 2g/3g.I disabled the filter and it worked after that. Also, unrelated, but I also suffered from a problem where after a few calls/texts/switching data on/off, I would lose connectivity until the next reboot. I solved it by disabling automatic time and automatically setting the time using the clocksync application from the play store. Hope I helped, good luck.
Sent from my Optimus 2X using xda app-developers app

[HELP] Need LG Optimus 4X new baseband(v20c october 2014)

hello all. my phone shows "reorganizing internal processes" whenever i try to make a call. bcoz of this it is unusable as a phone.
also imei is null, baseband is unknown and cellular is in NO SERVICE.
nothing works: tried reboot,
other roms (cm 11, zaiben, mahdi etc..),GetRIL app...
also i tried to flash latest v20c but it always stuck at 10%..
but i can flash anything from cwm(philz touch)
so can anyone please help me with the so said baseband in cwm flashable format or a cwm backup of latest v20c update?
i'll be grateful to anyone who looks into this issue.
thanks in advance.:good::good:
Hi,
I will have your thread moved to your device section.
Good luck!
You will not find ant flashable format for cwm... I think, did you try to flash v20b? Only way to change you baseband is to flash firmware.
i"ll try upload you stock partitions to flash ***when i find some free time***
Marko055 said:
You will not find ant flashable format for cwm... I think, did you try to flash v20b? Only way to change you baseband is to flash firmware.
Click to expand...
Click to collapse
yes i tried flashing latest v20c and v20b.. but always stuck at 10%.. tried 3 different pcs and cables and latest method of kdz flashing too.. still no luck:crying:
Any updates on this?? anyone?
I just check on lg page, latest firmware for your country is v20A, so try to flash that.
Marko055 said:
I just check on lg page, latest firmware for your country is v20A, so try to flash that.
Click to expand...
Click to collapse
dude, i cant "FLASH". thats the problem
What about LG Mobile support tool? Connect phone via USB and wait for the tool recognizing it. In the menu you can "reset upgrade errors", the tool downloads latest version for your phone automatically and flashes itself.
Yeah, the 4X is nearly unbrickable. Even when nothing works, LG Mobile support tool can get it back with a stock rom.
I am in Portugal and have the same problem. I read in a different thread that the problem of "reorganizing internal processes" is in fact a crash of the phone/radio process, due to hardware bug that stucks when both voice and data communications are requested at the same time in a 3G network. I'm not sure if even V20C can correct the problem. One solution is to switch to 2G in general, (EDGE data speeds... )and you won't have problems, When needing for a particular download, switch temporarly to 3G.
But if anyone have a 3G stable solution, please share as I am also highly interested!
I tried stock JB. In custom CM roms, for instance 4.4.4 (is what I have now), you won't have a "reorganizing..." message, but you will loose completely mobile communications when the problem occurs, and only a phone reboot will recover it
SHA_NDY said:
What about LG Mobile support tool? Connect phone via USB and wait for the tool recognizing it. In the menu you can "reset upgrade errors", the tool downloads latest version for your phone automatically and flashes itself.
Click to expand...
Click to collapse
tried that already. it stops at 10%. says retry. no go.
ismayeel25 said:
tried that already. it stops at 10%. says retry. no go.
Click to expand...
Click to collapse
I did have sam problem wiht 10% thingy but I use the LGFlashtool2014 from the forum:
Code:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar
(credit to proper uploader, I dont remember where did I get it, sorry)
The problem causes by LG update software when you kdz from 20A to B or C.
about the IMEI the V20C not really solve my problem but it' sustainable.
Bests of luck.
Thanks. i'll try it.
any chance

Categories

Resources