HELP! bricked and got broken usb port - Galaxy S I9000 Q&A, Help & Troubleshooting

ok ive bricked my galaxy s and ive got no usb port because its broken off (long story) and i cant enter recovery mode anymore (my vol up+menu+power does nothing since i bricked it)
BUT i can get into download mode,but it's useless because my usb port is missing (it broke off)
Given these facts....i already know it cant be fixed.
but i thought i would see if anyone knows of any miracle that can bring my gti9000 back to life ?

Well, since recovery is broken, I don't know anything you could do without trying to repair the USB Port. If recovery would actually work, you maybe could install a rom from external sd. Since that doesn't work, only thing you can do is being crafty and fix the USB Port (if that is somehow possible)
And I guess you're probably pretty lost anyway without USB. You can't copy things, no flashing, no charging etc.

Related

[Q] Just bricked my phone...

I was flashing EZ base and not paying attention (see attachedfile).
Now my SGS doesnt even respond to the power button! Is there ANYTHING I can do??
Please help
Plug the phone into the usb port then switch on phone. Does the pc detect a device?
i think i know you mate?
I recently soft bricked my phone and couldn't get into download mode the normal way.
What worked was holding the vol down button and the home button in (not the power button) and then plugging it into USB while holding them in. The USB power basically takes the role of pressing the power button.
I hope it works, good luck!
sorry mate but i just cant figure out how you could be so clumsy... so many times it is stated that you must be very careful with odin....
that is not helping, is there anything that can be done in the situation?
mab71 said:
sorry mate but i just cant figure out how you could be so clumsy... so many times it is stated that you must be very careful with odin....
Click to expand...
Click to collapse
Sorry mate, I just can't figure out why you would post a such a useless unhelpful reply. I flash my phone on a regular basis with CM7/MIUI, mistakes can happen!
To everyone else, thanks, I got it working.... no idea but I read some bricked threads and tried out something... took the battery out, kept hammering the power button whilst putting the battery in with vol down and managed to get into DL mode.
Phew!
Hope you have your efs folder backed up. The SGS is hard to brick and one of the phones that can be unbricked easily. The only problem is with the efs (the files inside the efs folder stores your product code and the imei number.)
Just wanted to bring this to your notice if you haven't done it yet.
just bricked a samsung gt-i9000. Hopefully I can get help to recover. I made several mistakes or false assumptions.
1. I could never get the phone to boot into recovery or download mode by itself. (this is my wife's phone -uh oh - as my phone I had no problem doing this). But I installed adb sdk and could reboot it into recover or download that way, so went ahead with flash.
2. I was using an older perhaps guide to flashing MIUI which had different file names that no longer seem to exist but double checked a few places and got current version numbers on MIUI and cm7 kernel and etc., but I used a newer version of ODIN 1.82 instead of the 1.7. Thought that wouldn't matter but in my bricking searches found that it may be an issue.
So now I have the icon of ..phone ! computer... and no way of getting into download mode as adb can't see the device. Hopefully there is a way - I've tried the suggestions above but they aren't working. I hope as last resort I can make the jig I've seen mentioned.. but any other methods?
/jd
[edit] these two phones were purchased at the same time and have same firmwares. I did back up efs from my phone, and in this process of flashing wife's phone had uploaded the galaxy_efs_backup file but didn't get a chance for it to work. If efs is borked, can I use the one from my phone or are they unique to each device? (assuming I can unbrick). [/edit]
hunky-d said:
just bricked a samsung gt-i9000. Hopefully I can get help to recover. I made several mistakes or false assumptions.
1. I could never get the phone to boot into recovery or download mode by itself. (this is my wife's phone -uh oh - as my phone I had no problem doing this). But I installed adb sdk and could reboot it into recover or download that way, so went ahead with flash.
2. I was using an older perhaps guide to flashing MIUI which had different file names that no longer seem to exist but double checked a few places and got current version numbers on MIUI and cm7 kernel and etc., but I used a newer version of ODIN 1.82 instead of the 1.7. Thought that wouldn't matter but in my bricking searches found that it may be an issue.
So now I have the icon of ..phone ! computer... and no way of getting into download mode as adb can't see the device. Hopefully there is a way - I've tried the suggestions above but they aren't working. I hope as last resort I can make the jig I've seen mentioned.. but any other methods?
/jd
Click to expand...
Click to collapse
i got the semi brick icon once
i pressed vol down, home, then power and held them together until the phone booted once, then once more, then once more (I kept holding them for about 40 seconds I guess). Then took the battery out for a minute, then while holding all 3 buttons together, put it back in (this is tricky, you need to practice or have someone else to help you) and did another 40 second loops. Finally took the battery out, put it back in and tried download mode and it worked.
But I could get download mode before I bricked it...
thanks allotrios,
Gave it a valiant try and no luck. I'm going to have to figure out the jig I guess - I can't figure out how they plug in those largish looking usb jigs into that tiny proprietary (looking) usb port on the i9000. Videos say a cheap micro usb cable but I think i may have to cut into my SGS charging/usb cable. But doesn't look like the cables on videos/pics.
hunky-d said:
thanks allotrios,
Gave it a valiant try and no luck. I'm going to have to figure out the jig I guess - I can't figure out how they plug in those largish looking usb jigs into that tiny proprietary (looking) usb port on the i9000. Videos say a cheap micro usb cable but I think i may have to cut into my SGS charging/usb cable. But doesn't look like the cables on videos/pics.
Click to expand...
Click to collapse
Hang on, one more thing you can try, worked for me just last weekend....
"Leave Odin Open. Then Plug the USB. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes release the Power Button. It will get to the download mode"
Worked like a charm, got it from this thread
http://forum.xda-developers.com/showthread.php?p=13630631#post13630631
If it works for you make sure you hit the thanks button of the guy that originally posted it
If you really need a JIG try this http://www.sparkfun.com/products/10031 with one of these http://parts.digikey.com/1/parts/764289-res-301k-ohm-1-4w-1-metal-film-mfr-25fbf-301k.html
Taken from 1st post in this thread
http://forum.xda-developers.com/showthread.php?t=819551
Gave it a go and no luck. I was wondering if Odin v1.82 was a problem so dl'd and used Odin v1.3 (says GT-P1000 on the title bar of it) but didn't seem to matter. Tried both versions.
I had Odin running, plugged in the phone which brought up the "brick" icons, then held down the 3 buttons until it rebooted (black screen came on) and released power, still holding other two buttons. Nothing - just the icons of death. I'm very rural so have parts coming for a jig - might have them by Monday evening or mid-week. Lucky that the phone was really slow and buggy (build XXJP2) so wife didn't like it at all. She wants an iphone so was hoping to spiff this one up to curtail that move. /jd
[edit] My research says that some of these phones have a bad secondary bootloader that prevents the 3-button technique. Not sure if that is inclusive of all these methods mentioned in this thread - that they simply won't work on a phone with the bad bootloader or whether these methods have sometimes overcome that limitation. But I've found a few links to fix it if I can get the phone back from the dead..
My phone is rooted, how can find efs folder and can I save a backup my computer hard drive?
I do odin flashing, in case something goes wrong.
chablo12 said:
My phone is rooted, how can find efs folder and can I save a backup my computer hard drive?
I do odin flashing, in case something goes wrong.
Click to expand...
Click to collapse
hey dude just download root explorer then open it u will find the efs folder in it
presss the efs folder for a second then there will be a popup in that u will find copy
just copy it and paste it in ur sd card
then connect ur phone to pc then u will find that efs folder
then just copy it to ur pc
Just a note to add data points on the bricking from my situation.
I read somewhere that a guy got his phone in download mode by plugging it into a bluetooth headset without it plugged into the charger. He figured it had built in resistance to help detect which device it was being plugged into and voila! he got download mode. (People in that thread asked which headset and he hadn't replied at that point so I don't know which).
I misread that at first to read a guy plugged the phone into his charger so I tried it (3 button combo and variations) and of course didn't work. But I was sitting there thinking about something else holding down the buttons and all of a sudden got it into download mode. The computers wouldn't recognize it though. So no luck - figured I had a jig coming so no biggy. Pulled the battery and tried again and it worked. This time I got into a download mode that the computer recognized.
So I flashed a kernel and got a "higher level" brick - got to first boot screen with words - but it just sat there vibrating. So tried a JVH single tar file an then got a boot loop up through the boot animations and noise. So am progressing - think I will try getting back to stock Froyo from samfirmware.com and see what goes from there. /jd

[Q] Bricked Captivate & Micro USB for data broken...

Hello everyone,
I installed a rom on my rooted phone and it did not go well. Now the phone is bricked.. Normally I would be able to fix this. But a few months ago the phone stopped being recognized by my computer. Still charges but the port is damaged some how and no pc will recognize it. I can not get it into recovery I have tried and tried again and again. Still stuck in android with the triangle around it. And sometimes I will get a symbol with a phone-triangle-pc. Does this mean it is done, shot, bricked for ever? LOL
You could replace the micro usb port...
Connect phone to pc and run samsung kies it will repair files then open kies, go to tools and install drivers then get into download mode and flash with odin
michaellengyel33 said:
Hello everyone,
I installed a rom on my rooted phone and it did not go well. Now the phone is bricked.. Normally I would be able to fix this. But a few months ago the phone stopped being recognized by my computer. Still charges but the port is damaged some how and no pc will recognize it. I can not get it into recovery I have tried and tried again and again. Still stuck in android with the triangle around it. And sometimes I will get a symbol with a phone-triangle-pc. Does this mean it is done, shot, bricked for ever? LOL
Click to expand...
Click to collapse
I can fix this. Send me a PM.
I am having a similar issue. My phone is soft bricked on the AT&T splash screen with no ability to get it into recovery. The micro USB is completely non-functional.
I am (was?) running CM7 when the problem occurred. I have considered just about every option I can think of (and have had the phone together and apart twice to see if I could get the port working... no dice) including having the phone boot from an external SD card but this still seems to need some ability to get into recovery, which I do not have.
Any creative solutions (short of just buying a new phone...)
clickervet said:
I am having a similar issue. My phone is soft bricked on the AT&T splash screen with no ability to get it into recovery. The micro USB is completely non-functional.
I am (was?) running CM7 when the problem occurred. I have considered just about every option I can think of (and have had the phone together and apart twice to see if I could get the port working... no dice) including having the phone boot from an external SD card but this still seems to need some ability to get into recovery, which I do not have.
Any creative solutions (short of just buying a new phone...)
Click to expand...
Click to collapse
You could send it to the guy above to have a new micro usb port installed or MobileTechVideos.com. I had them fix a hard brick on my Captivate and would use their services again in a heart beat if I needed to.

[Q] Phone Stuck in boot loop - USB port broken

First of all, i'm new here, so if I make a mistake, no hate please.
So I was trying to install Xbean onto my Galaxy S GT-I9000.
This phone has a broken USB port, and as such, I had to root and flash Clockwordmod Recovery mod onto it without a computer. I managed to get into CWM Recovery and went to flash the Xbean.zip file I had on the internal SD card, and when I did, it lasted maybe 3 seconds, then turned off and back on. It's now hanging at the "Galaxy S GT-I9000" first boot screen. For some reason, the 3 button combo doesn't work for either recovery or download.
Anyone have any ideas on how I can fix this issue?
P.s. I have already taken the battery out and placed it back in multiple times.
same here. I have a galaxy s I9000 with a broken usb port and I can get into download mode but no recovery. because of the usb port can not use odin. searched a lot but I could not find a solution. without odin it seems it is not possible to fix the phone. One repair center guy told me that there is a chip or something on the motherboard that regulates the usb connection. that thing is damaged because of imporperly charging. I have a bricked phone.(though I have still download mode)
both of u. if ur on GB. n u success to boot to recovery before da problem occur, u need to flash cm9 stable first to gain da cwm not direct custom ROM. then first flash will bootloop. juz take out battery, n use 3 combo button to go back to recovery again. its da matter of releasing da combo button. release it RIGHT AFTER u see da first bootsplash n wait. if failed. try again. n if it still fail. it means da kernel doesnt even flashed inside system.so u need to flash back to firmware using odin.
note: first flash will install cwm n kernel only as upgrading partition.
second flash will install da ROM.
try to boot to recovery again.
Sent from my GT-I9000 using xda app-developers app
RenegadeTe said:
First of all, i'm new here, so if I make a mistake, no hate please.
So I was trying to install Xbean onto my Galaxy S GT-I9000.
This phone has a broken USB port, and as such, I had to root and flash Clockwordmod Recovery mod onto it without a computer. I managed to get into CWM Recovery and went to flash the Xbean.zip file I had on the internal SD card, and when I did, it lasted maybe 3 seconds, then turned off and back on. It's now hanging at the "Galaxy S GT-I9000" first boot screen. For some reason, the 3 button combo doesn't work for either recovery or download.
Anyone have any ideas on how I can fix this issue?
P.s. I have already taken the battery out and placed it back in multiple times.
Click to expand...
Click to collapse
Usually the way to fix this would be to use the adb shell to force download mode, or using a USB jig to go back to stock. However neither of them would work because you have a broken USB port... :/
durkaya said:
same here. I have a galaxy s I9000 with a broken usb port and I can get into download mode but no recovery. because of the usb port can not use odin. searched a lot but I could not find a solution. without odin it seems it is not possible to fix the phone. One repair center guy told me that there is a chip or something on the motherboard that regulates the usb connection. that thing is damaged because of imporperly charging. I have a bricked phone.(though I have still download mode)
Click to expand...
Click to collapse
Again, best way to do this would be to use download mode and flash in a stock rom. Bu tif the USB port is broken... :/
I think the only thing you guys can do would be to get the USB port repaired somehow. Most methods (although do try @compacity's method, it may work) rely on the USB port and a USB connection.
Sent from my GT-P7510 using Tapatalk HD
was struggling with the same problem for 2 weeks until I had to give up and send it in.
In my case though, it was not like the support guy said a broken chip but abrasion of the connector in the middle of the USB Port. Obviously plugged it in too often.
Sent it to W-Support, they replaced the small plate in the middle of the connector and everything is working nicely again. So probably a piece of hope for you that maybe some support can still revive your phone. Unfortunately afaik there is no way to recover it w/o reflashing. Was within warranty so no clue what the price would be.
Some people are reporting that removing the battery for like one night made the bootloop disappear.. desperate times etc. wo why not give it a shot
Soryuu said:
Usually the way to fix this would be to use the adb shell to force download mode, or using a USB jig to go back to stock. However neither of them would work because you have a broken USB port... :/
Again, best way to do this would be to use download mode and flash in a stock rom. Bu tif the USB port is broken... :/
I think the only thing you guys can do would be to get the USB port repaired somehow. Most methods (although do try @compacity's method, it may work) rely on the USB port and a USB connection.
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
As I said before donwload mode is ok but conection can not be done due to broken usb port (even after fixing the usb port two times). So I guess there is something wrong with the main board. Anyway thanks to all...May be if there is a way to boot from an external sd (like installing ubuntu from usb stick) if not I have dead phone....

[Q] Please help!

I bought the phone only 3 months ago... The version I had wasn't fast enough so I installed a new rom instead... The rom I installed was even slower so I tried putting another and I accidentally wiped all my data and cause my phone to get into brick mode...
I managed to solve the problem and a vibrant rom is now on my phone...
The problem now is that I want to replace that rom and I found out that every time I connect it to the computer with USB cable or plug it to the wall the phone goes off and a sign of empty battery apears with loading dots...
I tried to switch to a new battery and I realized it's not the problem...
I took the phone to a special lab to fix it and they told me they won't fix it cause there is a component inside that handeling with it may cause the phone to totally die...
I don't know who to turn to...
Please help!
search for unbrickable mode on search box, but i dont really prefer that way if hardware faulty involved.
Can you get into download mode? Are you on Jelly Bean? We need more informations. If download mode work you should try to flash a stock rom via Odin.

[Q] problem with usb port and software

I have an AT&T Captivate, I successfully installed ICS ROM using internal SD card method, but then I decided to go back to GB through a backup that I made before I install ICS, when I tried to restore a backup using CMW recovery, some kind of error appeared after I have formatted the phone.
after I restart the phone it seems that there's no rom installed and the phone won't start I can't even get to the recovery mode the screen becomes white and the phone get very hot but nothing else.
I tried to get a new software using odin but then I remembered that I used to have a usb issue the usb port wasn't welded in place in the right way so the phone was charging but not recognized by the computer so I think the power legs are welded correctly but the data legs aren't.
I took the phone to a person who can make this welding good but then he told me that one of the usb welding pads on the motherboard are missing and that he can't weld it and he need something like a blueprint or a map for the board to but a wire instead of that missing pad.
so I'm asking, is there any way to install a software that doesn't need a USB connection and if not is there a place where I can find this map for the motherboard??????
plzzzz help guys
I once had my Cappy seemingly hard bricked, black screen and nothing else. I was able to use one of the alternate methods of getting into Download / Recovery Modes to reflash the phone. See -- Captivate - PC Connection Issues, Download Mode and Recovery Mode Help I used one of the methods where I pulled the battery, and then held a button combo while I replaced the battery.
It sounds like you have a custom recovery, either CWM or TWRP. If so, you may be able to put a ROM on the external_SD using your PC. Once you have done so put the microSD back in the phone and see if you can flash from recovery.

Categories

Resources