I can still return my NT. It's clear that BN doesn't want one to root or sideload apps. Lots of the sideloaded apps don't behave properly and some menus are invisible. It's difficult to install non stock keyboards. Now with the latest OTA update we have to find a way to re-root and sideloading apps doesn't work anymore.
My question to the group is: If I get a Color, root it and load CM7, will that guarantee that on OTA update won't mess up anything? Do you have the same problem with apps not behaving right under CM7.
Thanks for your input.
If you load CM7 to the emmc, you will never receive an OTA update as you will no longer be running the B&N modified OS. You can always run CM7 from SD card and leave the stock B&N OS on the emmc. That way you can switch between running CM7 and the reader software (which, for reading I believe is superior). Just depends on what you want to do with it.
As far as application issues. You may run into an app or two there that doesn't behave well, but overall my experience is that most of everything that I've loaded on it runs without a problem.
Is it possible for an update to prevent the loading of CM7 from the SD card?
If I understand what you are saying, yes.
There are two popular methods to running CM7 on the NC.
1) Wiping the B&N OS and loading CM7 directly to the internal memory (emmc) and using the SD card as storage only.
2) Leaving the B&N OS on internal memory and having CM7 run directly off SD card (since the NC reads SD before internal memory). B&N updates will not interfere with CM7 on the SD card.
Either way is up to you. I can't say which way is more popular as there are a ton of users that do it each way.
If you want to review the methods, search for eyeballer's guide (load to emmc) or verygreen's guide (booting off SD) and choose which one is best for you.
itsmee22 said:
Is it possible for an update to prevent the loading of CM7 from the SD card?
Click to expand...
Click to collapse
I believe it's possible for BN to prevent you booting from SD card through an update, but I don't see why they would bother at this point. I wouldn't worry too much about it.
CM7 from SD card... BN update concerns
Thank goodness for this thread. I've been trying to figure a few things out since I read the news about the BN update yesterday.
My situation is this: I am getting a Nook Color (NC) for Christmas in a few days. I've already formatted a microSD card to run CM7 on it, but obviously I can't mess with it until I open it. It won't have the update when I take it out of the box, so I know i have time to do something if I need to. But what exactly is locked down on the NC with this update?
That is, if I'm dual-booting from the SD card, I'll still be able to install whatever apps I want on the Android side, yes? I just won't be able to load (or "sideload") those apps into the NookOS? I understand that this is a much worse deal for Nook Tablet owners, but it seems I just lucked out, yeah?
Thanks for reading! As you can see, I'm brand new to all this!
511pf said:
I believe it's possible for BN to prevent you booting from SD card through an update, but I don't see why they would bother at this point. I wouldn't worry too much about it.
Click to expand...
Click to collapse
I suppose they would bother for the same reason they're trying to keep us (the NT people) from rooting and sideloading.
PoliteResponse said:
That is, if I'm dual-booting from the SD card, I'll still be able to install whatever apps I want on the Android side, yes? I just won't be able to load (or "sideload") those apps into the NookOS? I understand that this is a much worse deal for Nook Tablet owners, but it seems I just lucked out, yeah?
Click to expand...
Click to collapse
Yes. The B&N OS won't be rooted so you can't load anything outside their market, but you can install everything to the CM7 SD card. In fact I don't even think you'd have to register the nook or boot it into the B&N OS. You should be able to boot right from SD.
511pf said:
I believe it's possible for BN to prevent you booting from SD card through an update, but I don't see why they would bother at this point. I wouldn't worry too much about it.
Click to expand...
Click to collapse
No, I'm pretty sure the Color is safe from any changes to the boot order. The very first steps of the boot process are in hardware and so are the configuration settings for which device it checks first for x-loader and the rest of the boot process. I think the only way to change that order is shorting out or adding resistors to certain pins on the system board
A short answer to make it clear.
No, if you run CM7 from SD or any other way, then B&N cant do anything against it as the boot order is set into stone by the hardware.
Thats the main reason why the NC can still compete so well against its bigger brother.
Sent from my NookColor using Tapatalk
It's quite clear from the responses that the NC is preferable as an Android tablet over the NT. I'm inclined to switch, however is the NC hardware adequate? Is the screen and speed acceptable compared to the NT. Will I have a "real" tablet but be disappointed in the performance?
Do Netflix movies appear acceptable?
Lower your expectation, then.
What you intend to use "this tablet" for? Heavily watching video? streaming movies? playing games?... If that's the case, I think you need a better hw spec.
Although not dual core by the time a Nook Color is overclocked and running an optimized CM7 it gives a pretty good experience in my opinion.
Pretty smooth navigation and no problem with standard definition movies or regular games.
Anyone actually upgraded to 1.4.1 and tested SD boot
If we can net this out even further.... Has anyone actually upgraded their Nook Color to the new version (1.4.1?) and verified that they can still boot from their SD card?
I agree with the opinions that it is in hardware and BN's upgrade should not have any effect, but I'd like to know if someone has actually done it and can confirm the SD card boot still works OK after the upgrade.
Thanks!!!!
If you need power for the same / less money of a NC get a Novo 7 Advanced.
It runs everything from 2.3 to 4.0 and has a 1.0 ghz dual core, dual cams, mic, etc.
However its 800x480 resolution only, if you dont mind you might just get that one.
Sent from my NookColor using Tapatalk
S&W36 said:
If we can net this out even further.... Has anyone actually upgraded their Nook Color to the new version (1.4.1?) and verified that they can still boot from their SD card?
I agree with the opinions that it is in hardware and BN's upgrade should not have any effect, but I'd like to know if someone has actually done it and can confirm the SD card boot still works OK after the upgrade.
Thanks!!!!
Click to expand...
Click to collapse
Yes, I have 1.4.1 stock on internal emmc, and run CM7.1 stable off my uSD card.
LBN1 said:
Yes, I have 1.4.1 stock on internal emmc, and run CM7.1 stable off my uSD card.
Click to expand...
Click to collapse
Can you side-load any app that not offered by B&N on your NC running v1.4.1?
I have my NC running 1.4.1 rooted, and am able to sideload apps at will (within the memory limitations of 1.4.1). I did run the fix to (hopefully) prevent further B&N OTA updates, so I expect it to stay this way for a while. I also dual-boot to CM on SD card.
Related
So I just recived my new nook color. Problem being, I'm downrange in Afghanistan, all I have is military network / no wifi. Any suggestions to skip the setup entirely so I can use my nook?
Otherwise I think it's going to sit around until I get back to the states in August.
I do have a personal laptop, I could download files burn to cd, move to my personal laptop and root the nook.. but only if it could root a stock nook. model no bnrv200
Any suggestions for my rather unique prediciment?
You should be able to skip the B&N setup entirely by following the steps for Auto-Nooter. You will have to update to 1.0.1 of the B&N firmware by downloading it from their site and loading it on to the internal memory. Once that has applied(just be patient, stare at it for 10 minutes until it does its thing), you can use a micro SD card loaded up with AutoNooter 2.2.18+ to gain root access, unlock the setup screen, etc. You will have to skip steps 10 and up - just leave the thing not signed in. I don't know if the B&N apps will throw a fit about not being signed in, but my hunch says you should get a working system out of it.
Stay safe!
EugeneKay said:
You should be able to skip the B&N setup entirely by following the steps for Auto-Nooter. You will have to update to 1.0.1 of the B&N firmware by downloading it from their site and loading it on to the internal memory. Once that has applied(just be patient, stare at it for 10 minutes until it does its thing), you can use a micro SD card loaded up with AutoNooter 2.2.18+ to gain root access, unlock the setup screen, etc. You will have to skip steps 10 and up - just leave the thing not signed in. I don't know if the B&N apps will throw a fit about not being signed in, but my hunch says you should get a working system out of it.
Stay safe!
Click to expand...
Click to collapse
Yeah, that's sorta what I was thinking / hoping would work. I'll post some details of how I am able to get it up. (if I am able to get it up)
thanks
worked for me with auto-nooter, i never set up the b&n crap!
mrintegrity said:
worked for me with auto-nooter, i never set up the b&n crap!
Click to expand...
Click to collapse
sweet, good to hear.. now if only it didn't take me a day to download.. and have it fail once already... someday, maybe by xmass i'll get it downloaded and be able to use it...
Nook Color is supposed to have 8GB of built-in storage, right? But, after I auto-nootered my NC it only shows 5GB of available memory. That was very surprising.
I don't really care at this point, as this is not an emergency and I don't have million books on my NC. Also, with 2.2 coming up there might be newer rooting procedure that could potentially solve this issue.
But still wondering if anyone else has a similar issue and maybe knows a way of resolving it?
Thanks a lot
It's not because of the root. The 3 missing gigs are the system and recovery partitions.
Oh ok silly me. Thank you
I have been reading all these threads and can't figgure out what rooting a nc makes it? Do you get the function of a full android tablet? Android market, mp3s, a web browser?
Yes on pretty much all counts, however you can also boot from a microsd card to get a full os without rooting.
kraash said:
I have been reading all these threads and can't figgure out what rooting a nc makes it? Do you get the function of a full android tablet? Android market, mp3s, a web browser?
Click to expand...
Click to collapse
Full Android tablet- Yes
Market - Yes
MP3s - Could already do this without rooting, but you can now choose other programs if you dont like the stock version.
Web Browser - Again, stock has one, but you can get MUCH MUCH better ones after rooting.
But really, it unlocks the full potential of this tablet. BAsically, anything that any other android phone can do, this can do; with teh exception of GPS, Camera, and (currently) bluetooth. The system seems to have its bluetooth hardware, an devs are working on a fix for the software.. so we may soon get support for bluetooth headsets, etc.
Divine_Madcat said:
Full Android tablet- Yes
Market - Yes
MP3s - Could already do this without rooting, but you can now choose other programs if you dont like the stock version.
Web Browser - Again, stock has one, but you can get MUCH MUCH better ones after rooting.
But really, it unlocks the full potential of this tablet. BAsically, anything that any other android phone can do, this can do; with teh exception of GPS, Camera, and (currently) bluetooth. The system seems to have its bluetooth hardware, an devs are working on a fix for the software.. so we may soon get support for bluetooth headsets, etc.
Click to expand...
Click to collapse
It would be cool to attach a bluetooth key board and mouse when needed to be able to ssh into a server.
dcontrol said:
Yes on pretty much all counts, however you can also boot from a microsd card to get a full os without rooting.
Click to expand...
Click to collapse
Can you point to a thread about his. I thought you had to root to boot off of the SD card.
rlkelley said:
Can you point to a thread about his. I thought you had to root to boot off of the SD card.
Click to expand...
Click to collapse
Any one of the Froyo SD card threads will do. Because the nook, rooted or not, will automatically boot off SD before the built in memory, it is possible to boot a whole OS outside of the stock, without needing to be rooted..not much more to it than that.
Divine_Madcat said:
Any one of the Froyo SD card threads will do. Because the nook, rooted or not, will automatically boot off SD before the built in memory, it is possible to boot a whole OS outside of the stock, without needing to be rooted..not much more to it than that.
Click to expand...
Click to collapse
Which is better, full root, or os on sd?
Is the processor on this thing good enough for either to be worth it?
kraash said:
Which is better, full root, or os on sd?
Is the processor on this thing good enough for either to be worth it?
Click to expand...
Click to collapse
Honestly, i see little reason not to root, and have an SD image, but it is up to the users. For my daily use on the nook, i am rooted, and have plenty of customizing done. The hardware is great, but I did not like B&N's home screen..
And the processor is awesome, especially overclocked to 1.1Ghz (same core architecture as the iPad, but .1Ghz faster). The graphics card is mid ranged, but by no means bad, and can handle most any android game out right now.
Divine_Madcat said:
Honestly, i see little reason not to root, and have an SD image, but it is up to the users. For my daily use on the nook, i am rooted, and have plenty of customizing done. The hardware is great, but I did not like B&N's home screen..
And the processor is awesome, especially overclocked to 1.1Ghz (same core architecture as the iPad, but .1Ghz faster). The graphics card is mid ranged, but by no means bad, and can handle most any android game out right now.
Click to expand...
Click to collapse
madcat, which root option do you like for it?
kraash said:
madcat, which root option do you like for it?
Click to expand...
Click to collapse
I used the Auto nooter for 1.01.. though really, any option yields the same results in the end.
Is there any reason to register your Nook with B&N other then purchasing book to read on it?
I picked up a Nook a couple days ago and immediately used Nookie and Honeycomb from the SDCard. I've only booted and seen the intro video/setup once but never completed the setup.
I'm still not sure if I ever really plan on using the Nook with it's base software. I'll most likely flash the internal memory when the Honeycomb official source comes out and things get real stable.
I can't imagine that not registering will effect anything, but I just want to make sure I'm not overlooking something. I don't want it to bite me in the ass down the road.
I mainly want to make sure if I ever do boot into the stock setup that it doesn't auto update in the future and possibly complicate rooting the device.
Gonna bump this one up instead of creating my own. Tried searching, but there's so many threads about registering, I couldn't find anything about not registering, aside from this single thread. I also come from SD Froyo, where there's no registration, and don't care about anything having to do with B&N aside from the hardware itself. From some of the "lost registration" threads, all we lose is access to the B&N library/store, is that all? Considering finally moving over to CM7 flashed directly to the NC.
if youre not on stock rom, registering is useless!
That's what I thought, even though most of the builds still warn you to register before flashing. Like the CM7 guide: http://forum.xda-developers.com/showthread.php?t=1030227
daemonfly said:
That's what I thought, even though most of the builds still warn you to register before flashing. Like the CM7 guide: http://forum.xda-developers.com/showthread.php?t=1030227
Click to expand...
Click to collapse
That is only so you could use B&N market for buying books... etc.
So I have read through the thread on creating a CM10 SD card. I have also read a couple of threads on root etc.
I am interested in doing some research and demo of an HD+ and want to be able to go into a B&N or a BB and boot to a micro card I bring with me to test a few apps.
Is it possible to do something like that, or do I have to "build" the card on a device? If someone has a working image of a card I could download that would be perfect.
My overall intention is to then use my wifi hotspot, install dolphin and dice and do some web surfing tests as well as stream video tests.
Want to see how the unit stacks up to my Acer a500. I have played with a demo unit in BB and was able to surf via the built in browser and youtube but I want apples to apples comparison since that is what I am familiar with.
I use my acer 2-4 hours a day for video, surfing, etc and its getting a little old and slow these days.
Aaron Camp said:
So I have read through the thread on creating a CM10 SD card. I have also read a couple of threads on root etc.
I am interested in doing some research and demo of an HD+ and want to be able to go into a B&N or a BB and boot to a micro card I bring with me to test a few apps.
Is it possible to do something like that, or do I have to "build" the card on a device? If someone has a working image of a card I could download that would be perfect.
My overall intention is to then use my wifi hotspot, install dolphin and dice and do some web surfing tests as well as stream video tests.
Want to see how the unit stacks up to my Acer a500. I have played with a demo unit in BB and was able to surf via the built in browser and youtube but I want apples to apples comparison since that is what I am familiar with.
I use my acer 2-4 hours a day for video, surfing, etc and its getting a little old and slow these days.
Click to expand...
Click to collapse
You do have to boot the SD in a device one time to get the card to partition itself. Then adding the CM10 and gapps can be done at home with a Mac or Linux. Then you can take it back to the store to boot again to finish installing. Then you can run it there.
Sent from my NookColor running CM10 on SD using Tapatalk.
leapinlar said:
You do have to boot the SD in a device one time to get the card to partition itself. Then adding the CM10 and gapps can be done at home with a Mac or Linux. Then you can take it back to the store to boot again to finish installing. Then you can run it there.
Sent from my NookColor running CM10 on SD using Tapatalk.
Click to expand...
Click to collapse
Based on that, then if someone could provide an image of a working micro card, I could use that, correct?
Anyone want to PM me with a download? I just need this to run some quick like for like comparisons before I pull the trigger!!!
If its easier, I am even willing to send a 4 or 8gig micro and a return label to someone and have them make a copy and send it back to me.
Thanks