Related
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
plug it into the phone, and u're ready to go.. hence the name usb on the go
jinnn_1989 said:
please tell me how to enable usb on the go . i want to attached my pen drive and my hard drive to my phone .
Click to expand...
Click to collapse
You need a USB Host to go cable - they are pretty cheap off of ebay.
USB hard drives don't always work - at minimum you will need a powered hub.
- Frank
i know wht USB on the means but how do i enable it. i have tried connecting with a pendrive with the help of the USb on the cable but it does not show .
Once you plug your on the cable in the phone will inform you that usb connecter s connected. Whatever you plug in at the other end of otg cable work run unless it is not supported.
Sent from my SCH-I500 using Tapatalk
Just plug it in and look in My files. It will show as usbstorage.
I have an official samsung OTG cable, it works fine on the SGS2, but doesn't appear on the Galaxy Note under usbstorage.
Anyone else out there having similar problems?
i had grab some ebay OtG but after unmount and remove the OTG it causes wakelock which drain alot of juice.
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
I also want to know this as well,I have spent considerable time yesterday trying to make this work but no luck at all,I would appreciate if someone could help,as I have seen a video in this forum where the guy was able to.connect a mouse to it stating that it is supported out of the box.
I was able to get it to work with a pendrive and a mouse with no problems, but I couldn't get a keyboard or my 2.5" external drive to mount.
Details:
My OTG cable was from DealExtreme for $2.30 or something.
My pendrive was FAT32 formatted.
My mouse was a basic $10 optical one.
My 2.5" external was NTFS, which probably goes some way to explaining why it didn't work even when I gave it some extra power from my desktop PC too.
My keyboard was a standard USB. I also tried a Logitech keyboard with a wireless USB dongle but that didn't work either.
I watched a whole film off my pendrive with no issues. I messed around with the mouse a bit, but the cursor moved too slowly for my taste and the scroll wheel didn't scroll webpages, which is half the reason I'd plug a mouse in anyway.
jinnn_1989 said:
I am also facing problems with OTG . when i plug in the cable thr is not msg nor anything happens in phone. please could any one tell me how to enable it may be with kernel or custom rom or may be anything else.
Click to expand...
Click to collapse
If you get no message when the cable is plugged in on it's own, chances are it is a problem with the cable. I bought a cable of Ebay which didn't work, so I bought a different one and that did.
Regards,
Dave
i made it with two male usb cable a htc usb cable and a female adaptor i have wired them up as advised on other threads but windows doesnt recognize my usb stick and my phone when plugged in charges but a no show in zune do i need more power to them any advice please thanks
If you post a picture of it, it would be easier to help you out.
Or, you can go ahead and buy a y cable off ebay. It's only about $5
adilaslam said:
If you post a picture of it, it would be easier to help you out.
Or, you can go ahead and buy a y cable off ebay. It's only about $5
Click to expand...
Click to collapse
i did but the pc didnt recognize the usb flash drive it did the phone but not the usb when plugged in through y cable
Is this true thing or just a scam?
http://www.ebay.com/itm/10cm-OTG-Mi...824707?pt=PDA_Accessories&hash=item4cfef29303
P.S I dont know this dealer and i m not promoting him either
Lasantha said:
Is this true thing or just a scam?
http://www.ebay.com/itm/10cm-OTG-Mi...824707?pt=PDA_Accessories&hash=item4cfef29303
P.S I dont know this dealer and i m not promoting him either
Click to expand...
Click to collapse
I think that is only an adaptor, so you should patch kernel to enable host mode; but afaik that patched-kernel works only on froyo rom..
That cable works BUT, you need a power source to actually have the OTG working. Look for some Y cable. The Y cable should look like this:
http://www.ebay.com/itm/USB-MALE-TO...ultDomain_0&hash=item337569b063#ht_500wt_1413
Except instead of mini usb end, you need female usb end.
you plug one end of the usb to phone and the other one to any usb power source.
You need the Y cable since Incredible S doesn't provide any power out from its microusb port, unlike the sgs2.
Of course you need to have a ROM that have the OTG capable kernel, I think those ICS should work, since OTG should be enabled on all ICS kernels.
wpra3 said:
That cable works BUT, you need a power source to actually have the OTG working. Look for some Y cable. The Y cable should look like this:
http://www.ebay.com/itm/USB-MALE-TO...ultDomain_0&hash=item337569b063#ht_500wt_1413
Except instead of mini usb end, you need female usb end.
you plug one end of the usb to phone and the other one to any usb power source.
You need the Y cable since Incredible S doesn't provide any power out from its microusb port, unlike the sgs2.
Of course you need to have a ROM that have the OTG capable kernel, I think those ICS should work, since OTG should be enabled on all ICS kernels.
Click to expand...
Click to collapse
If external power needed i dont see a use sadly .It would be nice to plug ur frnds pen drive and copy something in the move...
i actually tried it. Nothing happens. Don't waste your money. Your phone will not be able to detect the pen drive.
Lasantha said:
If external power needed i dont see a use sadly .It would be nice to plug ur frnds pen drive and copy something in the move...
Click to expand...
Click to collapse
Well, most people doesn't use flash drives these days, you can always use some online storage like dropbox etc, or email it to you.
The limitation of the system is the fat32, fat32 will not allow any file to be bigger than 4gb in 1 chunk, so you can't copy a whole hd movie out of someone's flash drive. And most flash drive now is 16gb+ and formatted in NTFS out of the box. All 3.5 external hdd is self powered, which makes it possible for you to read it from your device, but the chances of that drive is formatted in fat32 is really slim.
So yea, its a good thing to have but I think think its that usable though.
Can someone tells me which rom has OTG function?
Thx
there is a kernel support IS otg
but it's for android 2.2
http://forum.xda-developers.com/showthread.php?t=1097756
i have never seen otg support in any IS gb or ics rom
when looking at the storage control panel, it lists internal, sdcard-ext, and then "/mnt/usbdisk_1.1.1" and says "insert an [sic] USB disk for mounting".
so if i were to come up with some sort of adapter, could i plug a thumb drive into my phone's micro usb port to move files between the phone and the thumb drive? i can think of plenty of times that would be useful!
Tried. OTG cable works with Samsung galaxy S2 devices (Skyrocket using either SKY ICS or rooted OTA) but haven't got it to work on our Droids...(Bionic ICS leak, RAZR ICS OTA, Droid 4 ICS OTA...all rooted).
But if someone can prove me wrong I'd be happy to "eat my words" ...
Be strong and very Koragus, my ninja...
OTG works, BUT only in a very cumbersome way, since external power is needed.
A powered USB hub does not suffice, since it only powers the slave devices, not the host (= phone). The phone must be in charge-mode, which requires a Y-cable.
You need:
- an OTG adapter
- a USB hub with mini-USB in
- a USB Y cable with 2 normal USB plugs and one mini-USB out
Then
1. Connect the OTG adapter to your phone's micro-USB input
2. Connect the 'middle' USB plug of the USB Y cable into the OTG adapter
3. Connect the 'outer' USB plug of the USB Y cable to a charger (can be a portable battery as well)
4. Connect the mini-USB plug of the USB Y cable to the hub output
5. Connect any device you want to use to the USB hub
It looks like this (found this picture for Razr):
http://www.flickr.com/photos/teppan_hakushaku/6817735705/
Edit: I verified it for Droid 4 last week, but didn't take my own picture yet. Works with ICS .215 leak, no 3rd party apps (like 'StickMount') seem to be needed.
Edit2: According to some other posts in this forums (search for 'OTG') it will only work for FAT32 formatted drives. Didn't check this in detail but my drive was already FAT32. Also I found it did not work for my cheap wireless keyboard's USB dongle, but connecting a wired keyboard worked fine.
...reminded again why I love this community...
...no possible links to a purchase of this "y" cable?
Be strong and very Koragus, my ninja...
Glad I could help!
They come with some portable harddisks, so that's where I got mine. Not sure about the linking policy on XDA, please remove if not allowed. Here's an example:
http://www.dealextreme.com/p/usb-2-0-mini-5-pin-to-a-male-power-y-cable-62-cm-65630?item=10
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Oh yeah and I know need it to be with one usb end and not a very long cable . Thanks
Dude905 said:
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Thanks
Click to expand...
Click to collapse
It's probably possible, but it wouldn't work.
Take a look:
https://www.youtube.com/watch?v=0nqY2EXTHhE
Do some reading here:
http://forums.webosnation.com/hp-touchpad/331349-2gb-ram-upgrade-touchpad-attempt.html
In my opinion everything is possible with the right "CODE" and that is attached to a human memory with very smart neurons!
From what I saw there I'm assuming that the memory hard drive or card GB is internal to the board ? I want to replace the 32GB with a 64 GB card or whatever these HP tablets have . I don't want to get into un-soldering and soldering though .... Thanks
Dude905 said:
From what I saw there I'm assuming that the memory hard drive or card GB is internal to the board ? I want to replace the 32GB with a 64 GB card or whatever these HP tablets have . I don't want to get into un-soldering and soldering though .... Thanks
Click to expand...
Click to collapse
Everything is integrated. If you want to expand storage you can use an OTG Micro USB HUB an attached a USB 64GB flash drive, it will be bulky but works!
HP_TOUCHPAD said:
Everything is integrated. If you want to expand storage you can use an OTG Micro USB HUB an attached a USB 64GB flash drive, it will be bulky but works!
Click to expand...
Click to collapse
That would work ? that would be great if it can . I would like to place movies onto the usb flash drive and play off it, So you saying it can work ? Thanks
Of course it works, you can play movies directly from the USB flash drive. You will need to supply power to the USB drive, connected by wire or using a Power Bank.
https://www.amazon.com/Adaptor-Powered-Charging-Charger-Connector/dp/B00LTHBCNM/ref=sr_1_9?ie=UTF8&qid=1486006080&sr=8-9&keywords=OTG+micro+usb+hub
If you want to make it portable:
https://www.amazon.com/2600mAh-Portable-External-Battery-Charger/dp/B01N5O3OX3/ref=sr_1_10?
Hello .... I'm curious if this tablet can be open up and have the memory removed, only to upgrade it to a higher level, is it possible ? Oh yeah and I only need it to be with one usb end and not a very long cable . Thanks
Is a Micro USB Port, is the same as your charger. The one that you connect to your Tablet. Search and do some reading on how it works, is very simple but you have to understand how all comes together, there is information on this site also.
Once you have Android install on your tablet, it works the same as others Android or Tablet Devices.
I finally got a OTG Micro USB straight cable, usb on one end and micro on the other, try it out and nothing happens, is there a setting with the tablet that needs to be turn on or off ? thanks
What version of Android are you using? or the type or ROM?
HP_TOUCHPAD said:
What version of Android are you using? or the type or ROM?
Click to expand...
Click to collapse
Its ......Kitkat .... Android 5.1.1 version and cm-11-20161219-NIGHTLY-MLQ-tenderloin .... This is very stable ... Thanks
The ROM that you are using is from the Developer Milaq.
I installed the latest Nightly dated December 26 of 2016, of the ROM you are using.
https://milaq.net/downloads/tenderloin/cm-11.0/
After a fresh installed I connected the OTG Micro USB HUB, then connected the HP Touchpad cord charger to the OTG and finally the USB flash drive ( SanDisk Cruzer Glide 16GB). You will noticed that the USB flash indication light starts flashing and a notification on the Left top side on Android tells you ( USB Storage in USE ). Then you go to the File Manager and you will see USB Storage, when you touch it you will see all the files on the USB flash drive and you can play your movies directly from there at the same speed as if were on the internal storage. When you are done, go to setting and storage and eject the USB Flash drive. Is very simple!
HP_TOUCHPAD said:
The ROM that you are using is from the Developer Milaq.
I installed the latest Nightly dated December 26 of 2016, of the ROM you are using.
https://milaq.net/downloads/tenderloin/cm-11.0/
After a fresh installed I connected the OTG Micro USB HUB, then connected the HP Touchpad cord charger to the OTG and finally the USB flash drive ( SanDisk Cruzer Glide 16GB). You will noticed that the USB flash indication light starts flashing and a notification on the Left top side on Android tells you ( USB Storage in USE ). Then you go to the File Manager and you will see USB Storage, when you touch it you will see all the files on the USB flash drive and you can play your movies directly from there at the same speed as if were on the internal storage. When you are done, go to setting and storage and eject the USB Flash drive. Is very simple!
Click to expand...
Click to collapse
I don't see nothing since nothing happens once I connect it, though if I use the cable to connect to my computer I am able to see the tablet internal drive, but not to a flash drive from tablet to flash . This is why I was asking what's exact cable type for this tablet port . I'm thinking it isn't the correct one . There so many different sizes out there. Thanks for your suggestion, much appreciated
I sent you the link to Amazon of the OTG.
Did you take the time to learn what OTG is?
HP_TOUCHPAD said:
I sent you the link to Amazon of the OTG.
Did you take the time to learn what OTG is?
Click to expand...
Click to collapse
Yes, I did view it but the type that goes into the tablet isn't listed . I bought one already that I assume is the correct size but with these micro usb connectors there is many different types, do you understand what I'm trying to say . Pic below is what I'm using
Code:
https://s23.postimg.org/osksn2wrv/IMG_20170208_141448.jpg
Dude905 said:
Yes, I did view it but the type that goes into the tablet isn't listed . I bought one already that I assume is the correct size but with these micro usb connectors there is many different types, do you understand what I'm trying to say . Pic below is what I'm using
Code:
https://s23.postimg.org/osksn2wrv/IMG_20170208_141448.jpg
Click to expand...
Click to collapse
All the information is on this web site:
https://forum.xda-developers.com/showthread.php?t=1582771
And for the second time this is the OTG cable that I have, which I posted the link : https://www.amazon.com/Adaptor-Powered-Charging-Charger-Connector/dp/B00LTHBCNM/ref=sr_1_31?ie=UTF8&qid=1486568545&sr=8-31&keywords=micro+usb+otg If you look at the specification of how it works it tells you is a "Micro Usb HUB Adaptor with Power Powered"
The HP touchpad or old devices do not offer power to the micro usb port, you need a Y adapter one to supply power to the USB flash drive and the other one for data.
That is why I said, do some research to understand the connection, which it clearly shows on the Amazon product.
Oh ok now I got you it also needs power to make it work, the tablet alone isn't good enough . See, I was hoping just a simple connector going into the tablet Micro and have on the other end usb female connector were by I could plug in a flash stick without power needed . Thanks for all your help
Dude905 said:
Oh ok now I got you it also needs power to make it work, the tablet alone isn't good enough . See, I was hoping just a simple connector going into the tablet Micro and have on the other end usb female connector were by I could plug in a flash stick without power needed . Thanks for all your help
Click to expand...
Click to collapse
That will work with devices that allow power out from the charging port. The work around for old devices is the Y connector, with the connector I posted you can use a USB Keyboard, a USB mouse and a USB flash drive all at once, turning a tablet into a regular desktop PC. Like I posted your ROM will work and you can play movies directly from the USB drive with no loss in performance, with only your basic ROM nothing else is need it.
You are very welcome and have fun!
HP_TOUCHPAD said:
That will work with devices that allow power out from the charging port. The work around for old devices is the Y connector, with the connector I posted you can use a USB Keyboard, a USB mouse and a USB flash drive all at once, turning a tablet into a regular desktop PC. Like I posted your ROM will work and you can play movies directly from the USB drive with no loss in performance, with only your basic ROM nothing else is need it.
You are very welcome and have fun!
Click to expand...
Click to collapse
Yeah, those devises sound really good . I might just get one for that fact alone .... Though, it isn't really what I needed