I have way too much respect for xda to pollute it with stupid questions, but as a desperate noob at it for 4 hours, I can't find any other way to rectify my problem without humbly asking you guys for help..
So in short I decided to root a Galaxy S with odin to avoid all those crazy signature errors i've been getting doing it through the phone. After an initial root success I found that superuser was installed but not CWM. I then got lead onto another thread telling me to flash a kernel through recovery mode that would somehow give me CWM or something..
I went onto scoure this thread for a compatible kernel
http://forum.xda-developers.com/showthread.php?t=788108
But alas could not find the elusive "JP4." All 10 i've tried lead to bootloops. I decided to try again the initial rooting method I used (which gave me superuser and no CWM) but that too lead to bootloops or a still flash screen.
I can still go into recovery and download modes fine but cannot boot at all.
Your assistance would be much much appreciated
And I just realised I forgot to title the thread. I'm such a fool today..
Men, be more specific: WHICH kernel, on WHICH ROM?
spamtrash said:
Men, be more specific: WHICH kernel, on WHICH ROM?
Click to expand...
Click to collapse
Cheers for the reply matey. Its all good, I finally managed to finally track down the Aussie factory kernel I needed. That brought everything back nicely.
The Australian service provider Kernels should really be added to that big list
Related
Hiya guys.
I've searched the forum as much as I can to try and solve my problems and it's got me so far but I can't find any more information to get my phone back working properly so though I'd bite the bullet and make a thread. If the information I require is actually lurking out there then I apologise just please point me in the right direction.
Here is my story.
Right I rooted my device through some video I followed on youtube (I cant post the link)
I think it successfully (as far as I know) rooted my SGS.
So with my newly rooted SGS I downloaded Darky's ROM and followed the instructions in the guide to flash it onto the device.
In the end it failed and the phone powered off and wouldn't power back on.
Panic Ensued.
I have since got my phone back into the download mode and flashed froyo 2.2 (I downloaded from some link on this site) it said it was successful but now it won't boot past the Samsung Galaxy S logo.
Please help?
Thanks alot in advance.
try to do a factory reset in recovery (sometimes it works)
and another thing, it may be that the froyo rom you downloaded was bad or something..
try to use this one with odin if the factory reset wont work. i know this one works.
Flash as PDA using Odin with repartition enabled and 512 pit
http://sourceforge.net/projects/teamhacksung/files/galaxys/GT-I9000_FROYO_FULL_PDA.tar/download
that one fixed my friend phone when something slimier happened to him.
Right thanks alot mate don't know what the hell happened but left it off and just turned it on and now it's working fine!
Scared me a little that I nearly bricked it but I really wanna try installing a new rom but don't wanna break it again :S
Just read the flash instructions and you won't have any problems.
Sent from hell to take your soul
When you flash it can take up to 10 minutes for the 1st boot, so go have a cup of tea and be patient!
Sent from my GT-I9000 using XDA Premium App
Ah right that was my first time so it might have just been me being impatient and thinking it wasn't working because it had been broken.
Also just wondering, the link I downloaded this Froyo ROM from (from another thread on here, can't find it now) is it custom or stock?
Heres some details...
Firmware version
2.2.1
Kernel version
2.6.32.9
[email protected]#36
The phone feels much snappier than before!
I'm new to all this ROM/flashing bees wax so just wondering.
Thanks muchly!
If its from some thread on here its custom some how some way (unless you just changed the kernel - which is speedmod - a very popular one - from your details.
G
Yeah it's off here from a thread I was reading on how to sort my phone being stuck in download mode.
Is it alot faster than the original rom I was running then?
HELP! I am so scared...somebody help me!
I tried to installed the Overcome kernel but didn't like it, as each time I boot up, that voice comes up.
And plus, a few of my original apps was lost (including Market). So I thought i'd install with Odin again the:
CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
And now, when i switch on the tablet, it'll boot with the animation and sound, but then a blank screen.
I can manage to boot into ClockworkMod recovery. Can i be saved? Please somebody help me!
Thanks
geoyakult said:
HELP! I am so scared...somebody help me!
I tried to installed the Overcome kernel but didn't like it, as each time I boot up, that voice comes up.
And plus, a few of my original apps was lost (including Market). So I thought i'd install with Odin again the:
CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
And now, when i switch on the tablet, it'll boot with the animation and sound, but then a blank screen.
I can manage to boot into ClockworkMod recovery. Can i be saved? Please somebody help me!
Thanks
Click to expand...
Click to collapse
If you can boot into CWM, then you should easily be able to get into Download mode as well. You can go back to the stock image for your Tab, or try and reflash a different rom via CWM... sounds like just a bad flash for a soft brick..
pvtjoker42 said:
If you can boot into CWM, then you should easily be able to get into Download mode as well. You can go back to the stock image for your Tab, or try and reflash a different rom via CWM... sounds like just a bad flash for a soft brick..
Click to expand...
Click to collapse
Hi there, thanks for reply back to me.
I've managed to actually get it going again, by reflashing to the Overcome kernel.
However, some apps has disappeared and also the market.
Anyways, i wish to revert the whole thing back to stock, kernel and firmware. Is there a way I can do this via Kies?
Let me know what information regarding my tab you need. I believe it is the CPW (GSM) UK version.
cheers
geoyakult said:
HELP! I am so scared...somebody help me!
I tried to installed the Overcome kernel but didn't like it, as each time I boot up, that voice comes up.
And plus, a few of my original apps was lost (including Market). So I thought i'd install with Odin again the:
CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
And now, when i switch on the tablet, it'll boot with the animation and sound, but then a blank screen.
I can manage to boot into ClockworkMod recovery. Can i be saved? Please somebody help me!
Thanks
Click to expand...
Click to collapse
LOL. FYI, your Tab is not haunted. That voice that you refer to, is basically an indicator that the file-system on the Tab is being converted from RFS to EXT4 (what some would affectionately refer to as the lag-fix). You should have left it to continue. That's the reason we ask people to let it finish booting before doing anything else. As always, when it comes to flashing a new firmware/kernel, it's always better to read up and know what to expect.
Anyway, by the looks of it, you might have a corrupted file-system, since you keep shutting it down mid-conversion. That's the reason "the voice" keeps coming back. If you'd allowed it to complete, it should not have returned.
Secondly, flashing the Overcome Kernel alone will NOT remove the Market application. If you were already on the CF-Root kernel, it might remove the CF-Root specific applications like the CwM "app" (and not the recovery functionality, mind you...) and the Tweaks app as these apps were created by ChainFire specifically for his kernel.
Best advice would be to re-flash a stock firmware first, to get your Tab into a clean system. From there, you can continue to to install the kernel of your choice (like ChainFire or Kouxudaxi's fine kernels as well.... these kernels, if I'm not mistaken, do not do automatic EXT4 conversions)
If you're unsure of how to do this, refer to the guide in teamovercome.net and it'll guide you in basic re-stocking (but using our Stock safe package which will provide you with the Gingerbread-based JQ1 firmware).
LOL, +100000000000000000000000 thepitbull...
thepittbull said:
LOL. FYI, your Tab is not haunted. That voice that you refer to, is basically an indicator that the file-system on the Tab is being converted from RFS to EXT4 (what some would affectionately refer to as the lag-fix). You should have left it to continue. That's the reason we ask people to let it finish booting before doing anything else. As always, when it comes to flashing a new firmware/kernel, it's always better to read up and know what to expect.
Anyway, by the looks of it, you might have a corrupted file-system, since you keep shutting it down mid-conversion. That's the reason "the voice" keeps coming back. If you'd allowed it to complete, it should not have returned.
Secondly, flashing the Overcome Kernel alone will NOT remove the Market application. If you were already on the CF-Root kernel, it might remove the CF-Root specific applications like the CwM "app" (and not the recovery functionality, mind you...) and the Tweaks app as these apps were created by ChainFire specifically for his kernel.
Best advice would be to re-flash a stock firmware first, to get your Tab into a clean system. From there, you can continue to to install the kernel of your choice (like ChainFire or Kouxudaxi's fine kernels as well.... these kernels, if I'm not mistaken, do not do automatic EXT4 conversions)
If you're unsure of how to do this, refer to the guide in teamovercome.net and it'll guide you in basic re-stocking (but using our Stock safe package which will provide you with the Gingerbread-based JQ1 firmware).
Click to expand...
Click to collapse
Hi there,
Thank you so much for your time in replying - I've managed to install what i believe is stock Gingerbread from Samsfirmware. So everything looks back to normal... tho i have posted another Question, with all my firmware details so I can be reassured I am back to stock.
So sorry, I panicked so badly last night..ha!
You have also special thread with many scenarios how to fix your tablet if anything goes wrong.
It helped me yesterday to revive my Galaxy Tab. Just suddenly it started freezing and restarting, after 3 weeks working perfectly on Overcome. Nothing changed, or updated, nothing installed for days, and all what was ever installed are programs I already have on my two other Android phones, it simply froze in the middle of work. Wipe didn't work, changing file system didn't work, etc...
Read the thread: http://forum.xda-developers.com/showthread.php?t=1133590
Very good material.
nidza said:
You have also special thread with many scenarios how to fix your tablet if anything goes wrong.
It helped me yesterday to revive my Galaxy Tab. Just suddenly it started freezing and restarting, after 3 weeks working perfectly on Overcome. Nothing changed, or updated, nothing installed for days, and all what was ever installed are programs I already have on my two other Android phones, it simply froze in the middle of work. Wipe didn't work, changing file system didn't work, etc...
Read the thread: http://forum.xda-developers.com/showthread.php?t=1133590
Very good material.
Click to expand...
Click to collapse
Im very glad that the guide helps many ppl
@the Op : do me a fav and flash safe
Sent from my GT-P1000 using Tapatalk
k0sh said:
Im very glad that the guide helps many ppl
@the Op : do me a fav and flash safe
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Yup, in future i will be more careful when flashing, so glad that my tablet is back to normal (albeit with the Italian release of GB ) but everything works fine.
Will do more reading on the forums before undertaking any more flashing, make sure i know what i am doing and which Rom is best for me to use.
Cheers
Sent from my GT-P1000 using XDA App
geoyakult said:
Yup, in future i will be more careful when flashing, so glad that my tablet is back to normal (albeit with the Italian release of GB ) but everything works fine.
Will do more reading on the forums before undertaking any more flashing, make sure i know what i am doing and which Rom is best for me to use.
Cheers
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
best reaction i never read
Hi guys,
Basically I would like to install the ICS rom on my Galaxy S i9000 but have absolutely no knowledge of how to do so having never installed a custom rom before. Looking at the 'tutorial' for installing ICS leaves me just as clueless as it seems the individual steps require a decent knowledge of knowing what you are doing!
Also, I have discovered from attempts in the past that my Galaxy is one of those that is unable to go into download mode so that is another thing that I need help with (the link to the thread for the solution to this problem in the Galaxy FAQ is dead).
So yeah, any help much appreciated or even a point in the direction of the most thorough guide there is.
Cheeers.
Well, before you do anything you need to enable download mode. Think it's a case of enabling USB debugging and then adb, although I never had to do it.
Secondly you should probably stick a stock gingerbread rom on with odin.
Flash a kernel with odin.
Flash ICS
Flash ICS again.
Going straight to ICS with very little experience of custom ROMs may be a bit difficult especially given it's alpha status.
my phone also had the lock on the Download mode, seem like some service provides disable the feature to "try and prevent" people to flash custom roms as this voids warranty in South Africa. I found a fix on Google but cant remember where.. so if you dont get it right... some guys made a homemade jig here is a link on how to make it...
http://forum.xda-developers.com/showthread.php?t=819551
and when flashing a custom rom its best to follow the roms tutorial and usually there are post regard similar issues that could be encounter in the process. so the search function ends up helping alot instead of having to read thru 100 pages lol
its all new to us in the beginning then it just becomes second nature lol
i recon this is a nice tutorial to use
http://www.theandroidsoul.com/android-4-0-update-for-galaxy-s-i9000-custom-rom/
even has a method to return to stock
JoshJoshJoshJosh said:
Hi guys,
Basically I would like to install the ICS rom on my Galaxy S i9000 but have absolutely no knowledge of how to do so having never installed a custom rom before. Looking at the 'tutorial' for installing ICS leaves me just as clueless as it seems the individual steps require a decent knowledge of knowing what you are doing!
Also, I have discovered from attempts in the past that my Galaxy is one of those that is unable to go into download mode so that is another thing that I need help with (the link to the thread for the solution to this problem in the Galaxy FAQ is dead).
So yeah, any help much appreciated or even a point in the direction of the most thorough guide there is.
Cheeers.
Click to expand...
Click to collapse
1st u did not say what stock firmware u ve, If u ve updated with kies then u should ve download mode, i ve exactly the same problem. Once i updated from foryo to gingerbread i ve the 3 button download mode but still no recovery, u might never get it but dun worry u can still flash custom roms.
Here's what u ve to do, upgrade to stock gingerbread 2.3 with kies then flash cfroot kernel with odin,u'll ve recovery n then flash what u like...
JoshJoshJoshJosh said:
Hi guys,
Basically I would like to install the ICS rom on my Galaxy S i9000 but have absolutely no knowledge of how to do so having never installed a custom rom before. Looking at the 'tutorial' for installing ICS leaves me just as clueless as it seems the individual steps require a decent knowledge of knowing what you are doing!
Also, I have discovered from attempts in the past that my Galaxy is one of those that is unable to go into download mode so that is another thing that I need help with (the link to the thread for the solution to this problem in the Galaxy FAQ is dead).
So yeah, any help much appreciated or even a point in the direction of the most thorough guide there is.
Cheeers.
Click to expand...
Click to collapse
Josh. This is NOT a rom which you should pop your cherry on. It is buggy, not very fast and you need a good working knowledge of how to recover a soft bricked phone. If you cannot get into download mode, you would be foolish to flash ANY rom. There is a fix, search xda.
I admire the size of your swingers, but would recommend you gain a little more flashing experience.
However, good luck if you do decide to flash - there's plenty of help here if all goes wrong.
i "popped my custom rom cherry" on ICS build 12 i screwed it up when trying to go for build 13 but i found this tutorial http://forum.xda-developers.com/showpost.php?p=14273101&postcount=1
i installed the latest gingerbread kernel then the rom files and it was fine ater that and im just about to put build 14 on now so dont worry to much about it. Ive never got my phone to a state where i cant fix it, so if me a supernoob can recover a brick just about anyone could
Hi hopefully someone could maybe help me and point me in the right direction as im still very new to android and cant quite grasp what i need to do? and scared ill brick my shiney new phone!!
ok so i have put rowmow ics 4.0.3v1 on my phone but last night i wanted to try and put another rom on but every time i go into cwm it starts to install rom but will not pass setting permissions i am unsure as to what i need to do next
i have cf kernel 3.0.15-19220zclp1-cl131270
superuser and root checker says im rooted?
driving me mad as to what i have done or i am doing wrong
ive read different things here and there and some saying to flash to a kl3 but unsure what that is or if it even right ?
sorry 4 the noobish questions but i guess we have all had to start some where and this is me starting and hopefully soon grasp what i need to do?
many thanks 4 reading this and hopefully pointing me to what i need to do next!!
Looks like you do not have full root.
If you are Noob then you should read all the instructions properly otherwise you would brick your phone.
It is not a good idea to mess with ICS chinese leak, be careful.
i did read all instructions properly and as stated in op thread is was supposed to have full root
now your answer was not what i was really looking for some help or advice would be better rather than stating be careful!!
how can i rectify the problem to get full root back? so i can try different rom
i appreciate that you took time out to read my post but you was not very helpful
you need to provide more info..
if you're trying to go from a ICS rom to a GB ROM then you first need to flash a gingerbread kernel and then reboot recovery and flash the GB ROM from there.
its sorted i worked it out i was going to another ics rom i installed abys 3.9 installed new rom and flashed cf kernel and new rom working fine
probably an easier way to do it but that was the only way i could get past the permission problem
ChimpNippl3s said:
i did read all instructions properly and as stated in op thread is was supposed to have full root
now your answer was not what i was really looking for some help or advice would be better rather than stating be careful!!
how can i rectify the problem to get full root back? so i can try different rom
i appreciate that you took time out to read my post but you was not very helpful
Click to expand...
Click to collapse
I'm sorry I couldn't be of more help.
You just said "another ICS rom" and mentioned you are a noob, so with so much of unclear things I just wanted to let you know that something like this http://forum.xda-developers.com/showthread.php?t=1526852 could happen.
anyway, I am glad you could sort it out.
cheers
I need some help here, and I need to stop bothering the guys in the ROM forum about it so I'm asking here instead.
It's a t-mobile note 4. I was running Dynamic Kat on it and it was suggested I update the modem and bootloader with a partial flash file. Now my phone is stuck in a bootloop.
I CAN get into both download mode and TWRP, however, so it seems like this should be fixable. I'd be happy with even going back to fully stock and rerooting it.
I found this thread: http://forum.xda-developers.com/not...to-downgrade-cod6-to-nk4-upgrade-nk4-t3095585 which seems to about flashing back to stock NK4 or cod6. I know those are bootloaders, but I don't really understand what they mean beyond that.
Or can I just flash to the new stock lollipop t-mobile put out this week? If so, how? If anyone has the time to help me with this, I would really appreciate it.
Edit: I found instructions on sammobile.com. Going to try them. *fixed
Caelrie said:
I need some help here, and I need to stop bothering the guys in the ROM forum about it so I'm asking here instead.
It's a t-mobile note 4. I was running Dynamic Kat on it and it was suggested I update the modem and bootloader with a partial flash file. Now my phone is stuck in a bootloop.
I CAN get into both download mode and TWRP, however, so it seems like this should be fixable. I'd be happy with even going back to fully stock and rerooting it.
I found this thread: http://forum.xda-developers.com/not...to-downgrade-cod6-to-nk4-upgrade-nk4-t3095585 which seems to about flashing back to stock NK4 or cod6. I know those are bootloaders, but I don't really understand what they mean beyond that.
Or can I just flash to the new stock lollipop t-mobile put out this week? If so, how? If anyone has the time to help me with this, I would really appreciate it.
Edit: I found instructions on sammobile.com. Going to try them.
Click to expand...
Click to collapse
Easy fix. ODIN flash the stock COD6 software. Then start over again with cf auto root. There is a thread that had all of the files you need in one zip.
Sent from my SM-N910T using XDA Free mobile app
Yayyy I think it worked! Stock Lollipop is booting up. It's in the Optimizing apps phase.
Caelrie said:
Yayyy I think it worked! Stock Lollipop is booting up. It's in the Optimizing apps phase.
Click to expand...
Click to collapse
Are you the same one who renamed the tar.md5 file to tar? If so, when you ask for help you really should mention all the steps you took to get there. Where it went wrong, etc.
When in doubt, Odin flash full firmware to get back to stock. There are other steps you could have taken as well but Odin is almost always a surefire bet.
(Also remember to hit the thanks button for those who have helped you get things sorted, like that fella above and the people who helped you in the rom thread- not me of course because I didn't do anything but for those who did I'm sure they would appreciate it)
absinthesummer said:
Are you the same one who renamed the tar.md5 file to tar? If so, when you ask for help you really should mention all the steps you took to get there. Where it went wrong, etc.
When in doubt, Odin flash full firmware to get back to stock. There are other steps you could have taken as well but Odin is almost always a surefire bet.
(Also remember to hit the thanks button for those who have helped you get things sorted, like that fella above and the people who helped you in the rom thread- not me of course because I didn't do anything but for those who did I'm sure they would appreciate it)
Click to expand...
Click to collapse
Yah, that was me. I came over here to ask for help instead because I shouldn't be bothering you guys in the ROM thread. I was making progress though. By the time I made this thread, I'd figured out that if I could get into TWRP or download mode, I could odin my way out of it. Just needed some help on that doing that, but then I figured that out too thanks to sammobile
Caelrie said:
Yah, that was me. I came over here to ask for help instead because I shouldn't be bothering you guys in the ROM thread. I was making progress though. By the time I made this thread, I'd figured out that if I could get into TWRP or download mode, I could odin my way out of it. Just needed some help on that doing that, but then I figured that out too thanks to sammobile
Click to expand...
Click to collapse
Cool, glad you got it sorted. Yeah as long as you can access download mode you're golden, and a bonus if you can get into recovery as well.
Excellent job actually searching and reading and fixing your problem, far too many people want answers just handed to them, so kudos to you for that.
Just for the future if you need help, try to remember and list all steps you took (even if you don't know where you went wrong) in excruciating detail because it helps us troubleshoot and figure out what the problem is. Without certain pertinent info it could take a lot longer to solve it.
Overall good job, glad you're up & running.
Go to rapture download the rom and load it to sd card. Then follow directions exactly and u will be ok. No loading anything. Fresh start
BAD ASS NOTE 4
I am in the same boat with the boot loop. I flashed the partial firmware file as well and I did not rename it and the flash went fine. After that it boot to the screen that says powered by Android then it reboots over and over. Currently downloading the stock cod so I can odin that.
ElAguila said:
I am in the same boat with the boot loop. I flashed the partial firmware file as well and I did not rename it and the flash went fine. After that it boot to the screen that says powered by Android then it reboots over and over. Currently downloading the stock cod so I can odin that.
Click to expand...
Click to collapse
Technically you shouldn't be flashing just the partial firmware. It sets up a base so that you can flash a lollipop rom in recovery without issues. I'm not sure why someone is recommending just flashing the partial firmware only. I guess they figured it wouldn't cause issues.
Anyway, here is how the partial firmware should be used:
Flash partial firmware in Odin
Flash flashable stock lollipop in recovery.
Set up rom, make a backup.
From here you can restore your old kitkat backups without the problems that some are seeing (those who Odin the full firmware are having problems restoring kitkat backups/flashing kitkat roms without Odining ank4 first). The partial firmware prevents that but it's designed to be flashed right before flashing a lollipop rom.
I hope that helps some of you who are having issues.