Hello, friends!
I have a nearly useless app here. I'm trying to submit it to the marketplace and those Microsoft people don't seem to have nay problem with the uselessness! However, I had accidentally used a Windows logo in the splashscreen art of the app. Obviously, they were not comfortable with it and asked me to remove it. So, without bothering to go to source again, I simply replaced the jpeg file inside XAP keeping the name of the XAP same. But even after correcting the file, they tell me that there's still Windows logo and the application is rejected.
The XAP is here: Link has been removed
Finally, the app is here:
Is there any chance that I might have left some traces of the logo somewhere? Or is it possible that the same old XAP file was tested again due to names of the new and the old being same? Thanks to community for the support! Feel free to comment on the app and the logo thing. Suggestions are always welcome.
akshay2000 said:
Hello, friends!
I have a nearly useless app here. I'm trying to submit it to the marketplace and those Microsoft people don't seem to have nay problem with the uselessness! However, I had accidentally used a Windows logo in the splashscreen art of the app. Obviously, they were not comfortable with it and asked me to remove it. So, without bothering to go to source again, I simply replaced the jpeg file inside XAP keeping the name of the XAP same. But even after correcting the file, they tell me that there's still Windows logo and the application is rejected.
The XAP is here: http://goo.gl/0SQXc
Is there any chance that I might have left some traces of the logo somewhere? Or is it possible that the same old XAP file was tested again due to names of the new and the old being same? Feel free to comment on the app and the logo thing. Suggestions are always welcome.
Click to expand...
Click to collapse
Nice start. I think there is a problem though. Once you click "More" to read the entire article, is there no way to go back? Maybe I am missing something.
A couple of suggestions too.
1) Dark theme for AMOLED users.
2) Options to add sites for feeds.
Thanks.
Thanks!
chaitanya91845 said:
Nice start. I think there is a problem though. Once you click "More" to read the entire article, is there no way to go back? Maybe I am missing something.
A couple of suggestions too.
1) Dark theme for AMOLED users.
2) Options to add sites for feeds.
Thanks.
Click to expand...
Click to collapse
Thanks a lot for your suggestions. They're around on my to-do list, especially the theme one.
About navigation: I guess, the operating system makes use of the IE itself (of the engine behind IE, to be precise) to show pages even inside app. So, back button works the same way it does with IE - taking you one page back. So, the button's action depends upon the page being loaded. Simple solution to the problem you mentioned is to double press the back button - it works, I've checked. It takes back you to the list of news items. (It doesn't take you to the page where you clicked 'more', because I think its pointless to go to the short form of the article again after reading the whole article. Let me know if you think otherwise.)
Now, to address my issue, did you find any objectionable content (Windows logo or something copyrighted) which those people are complaining about?
Couldn't find anything except for the pocketnow logo on the splash screen that could have been mistaken as the Windows logo. I know it sounds silly, but who knows.
chaitanya91845 said:
Couldn't find anything except for the pocketnow logo on the splash screen that could have been mistaken as the Windows logo. I know it sounds silly, but who knows.
Click to expand...
Click to collapse
That's what I thought at first - the pocketnow logo. First thing, if pocketnow are using it, then should I. Secondly, it differs from the Windows logo significantly. Thirdly, they mentioned that the logo appears on the left cornet of the screen. And lastly, as you mentioned, pocketnow thing is stupid!
There was red Windows Mango logo used in the splash, which is now replaced with a red tile with the words 'blog windows phone'. I think that the confusion arose because I didn't change the name of XAP and the old one was tested again! Hope to get that approved. Wish me luck. I'll report the deep link here once its done.
akshay2000 said:
That's what I thought at first - the pocketnow logo. First thing, if pocketnow are using it, then should I. Secondly, it differs from the Windows logo significantly. Thirdly, they mentioned that the logo appears on the left cornet of the screen. And lastly, as you mentioned, pocketnow thing is stupid!
There was red Windows Mango logo used in the splash, which is now replaced with a red tile with the words 'blog windows phone'. I think that the confusion arose because I didn't change the name of XAP and the old one was tested again! Hope to get that approved. Wish me luck. I'll report the deep link here once its done.
Click to expand...
Click to collapse
That could be the reason. I hope it gets approved this time around. Please include the feature to add more sites, if possible.
All the best
Related
Dear folks, I am glad to share with you that I just managed to change the HTC splash screen to my baby girl's icon successfully. Sorry, I won't to share with you about her picture, but I can share with you my working procedure and the necessary BMP converters.
Before we go, please make a full SD backup with "r2sd all", and save it to secure place, I will not held any responsibility for any damages caused by following my steps, so please take your own risks.
To start, please read my another thread first, ( http://forum.xda-developers.com/viewtopic.php?t=44518 ), which will give you some basic information about we will do.
In the step 1.6 of that thread, we will get a 800c0800-splash.nb, which is 256KB. 0 - 0x2FBFF is for OEM splash screen, 0x2FC00-0x2FFFF is unknow for me(please leave it untouched), and 0x30000 - 0x3FFFF contains HTC Splash Screen.
The HTC splash screen is a 240W x320H 24b bitmap, and it is compressed by lz algorithm of bcl.sourceforge.net with a little modification, that's why its header starts with "BCL1" string.
To see the real bitmap of HTC screen, just HEX copy 0x30000-0x3FFFF to a standalone file, then convert it with my bcl.exe, it is attached below.
bcl d htc-splash.nb htc-splash.bmp.
The lz algorithm is very bad. If your own bitmap is too beautiful/complicated, the compressed content length will exceeds the 64K limit easily. In that case, you can't fit all your bitmap in.
To encode your own bitmap, type:
bcl c lz own-splash.bmp own-splash.nb
The encoded own-splash.nb will be auto filled up to 64K with 0 if it is < 64K.
Then HEX copy own-splash.nb to 0x30000 -0x3FFFF of 800c0800-splash.nb, then follow my other steps after 1.6 in that thread to flash it into your Wizard. Actually, the OEM Splash screen and HTC Logo screen update could be done at the same time, you do not need to do it twice.
BTW: the BCL.exe was compiled in VS.2005, someone may have problems to run it if you don't have MSVC 8.0 runtimes.
Enjoy and have fun,
And thanks, HTC, you give me two chances to see my favorate pictures. Next time, please let us play a 24 page slides show, since the boot up is so slow.
And thanks, HTC, you give me two chances to see my favorate pictures. Next time, please let us play a 24 page slides show, since the boot up is so slow.
Click to expand...
Click to collapse
LOL
The third is Windows Mobile logo, you can easy change it too _)).
that's why I just love this forum.
Thanks!!!
Button said:
And thanks, HTC, you give me two chances to see my favorate pictures. Next time, please let us play a 24 page slides show, since the boot up is so slow.
Click to expand...
Click to collapse
LOL
The third is Windows Mobile logo, you can easy change it too _)).
Click to expand...
Click to collapse
Is it a kind of registry tweaks? I remember I did it before in my SPV E200, but never try it on Wizard.
I hate to be a noob with this, but I don't know HEX editing very well. If someone does and has the free time, can you write a quick tutorial for us non-CS DIY'ers? Thanks.
If i get any free time this week I will, but it dosent look good =(
I also want to write one for the main splash screen (QTEK on the 2.17 ROM)
Later; Lew
flexchen said:
And thanks, HTC, you give me two chances to see my favorate pictures. Next time, please let us play a 24 page slides show, since the boot up is so slow.
Click to expand...
Click to collapse
I seem to vaguely recall that there was some ROM by a cellular provider - I don't recall which - where you actually had a progressbar going once it got to the Windows Mobile screen. It'd actually be good to see that thing on the devices by default
flexchen said:
Button said:
And thanks, HTC, you give me two chances to see my favorate pictures. Next time, please let us play a 24 page slides show, since the boot up is so slow.
Click to expand...
Click to collapse
LOL
The third is Windows Mobile logo, you can easy change it too _)).
Click to expand...
Click to collapse
Is it a kind of registry tweaks? I remember I did it before in my SPV E200, but never try it on Wizard.
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=WizardFAQ
Not quite, the newest aWizard doesn't change the splash image. It has a write error.
HardRoc said:
I hate to be a noob with this, but I don't know HEX editing very well. If someone does and has the free time, can you write a quick tutorial for us non-CS DIY'ers? Thanks.
Click to expand...
Click to collapse
HEX copy means copy the data contents in binary mode using some binary editors like WinHEX or Ultraedit, it ensure you can copy&paste the exact number of file bytes clearly. Usuallly, with a text editor, you have no idea about how long of text you have selected for copying.
Sorry I can't help you more. I prefer coding than writing articles, whatever English or Chinese, lt makes me look like a stupid.
First of all I am a newbie to flashing roms/unlocking/etc. I have an HTC TyTN II phone and have been reading for hours on how to change the bootscreen. (1st screen that pops up after powering the phone on) I kind of get an idea of how to do so but I guess I'm having compatibility issues or something with my computer running Vista 64 bit. Anyhow, I was able to flash my phone to one of the L26 diamond series roms and reflashed it with a different rom. My problem is that the bootscreen still shows the guy with a blue eye and says "L26 Diamond Series" on the bottom lower left corner. I want to change this back to the original "smart mobility" screen that the phone first came with or perhaps change it to some other HTC smart mobility screen. (I really love how the OEM original screens look) I hate the bootscreen on my phone right now. Any help would be greatly appreciated. Even better if you are located in the Southern California area and can help me in person. I'm willing to drive to you and perhaps even pay you. Please show me how it is done. I am a fast learner. Just a little overwhelmed right now that's all.
Appreciate your time.
Thanks in advance!
lol you can flash your rom but can't do the exact same thing for the splash screen.
funny
try doing a search "change bootscreen". You'd be surprised on what you find....
first of all to help you out that "boot screen" is called a splash screen if you say boot people will get confused thinking you mean the boot loader
second of all there are two ways to do it...
you can flash a new splash screen using a custom bootloader
or if it isn't cooked into your rom.....
you can change it through registry setting (just use schapps advanced configurator)
there are actually two different types of splash screens also... the one that is first that replaces your carier.
after that sometimes there is an animation ( you can use advanced configurator to enable disable and choose the animation)
and then the win mo splash screen.....
all of them are replaceable just search around for specifics on how to change them is not to hard
Figured it out!
I went ahead and used my friend's computer which is running Win XP and figured it out. It's a piece of cake now. Thanks for your help guys.
joel2009 said:
first of all to help you out that "boot screen" is called a splash screen if you say boot people will get confused thinking you mean the boot loader
you can change it through registry setting (just use schapps advanced configurator)
( you can use advanced configurator to enable disable and choose the animation)
Click to expand...
Click to collapse
Thank you for replying with no scolding or sarcasm! I really appreciate it!
I have used Adv-Config3 to change the splash screen so not to have AT&T logo staring at me, but 'No Joy'. I assume it has to be a .gif? Or will other file types work?
thank you in advance.
tbryson92110 said:
Thank you for replying with no scolding or sarcasm! I really appreciate it!
I have used Adv-Config3 to change the splash screen so not to have AT&T logo staring at me, but 'No Joy'. I assume it has to be a .gif? Or will other file types work?
thank you in advance.
Click to expand...
Click to collapse
It's actually really annoying that both screens while boothing are referred to as the splash screen. The splash screen that is referred to in Advanced config would more appropriately be called the welcome screen. To get rid of the very first screen which is also referred to as the splash screen you must flash a different one. If you search "custom splash screens" it will take you to a thread with a lot of different ones you can download. It's also pretty easy to create your own custom ones should you desire to do that as well.
I think the issue you're running into is that the one you're changing in advanced configu is supposed to be a .png file. Animated GIF's can be used, but think they're supposed to be named something different. I'll have to check and update my post.
scotchua said:
It's actually really annoying that both screens while boothing are referred to as the splash screen. The splash screen that is referred to in Advanced config would more appropriately be called the welcome screen. To get rid of the very first screen which is also referred to as the splash screen you must flash a different one. If you search "custom splash screens" it will take you to a thread with a lot of different ones you can download. It's also pretty easy to create your own custom ones should you desire to do that as well.
I think the issue you're running into is that the one you're changing in advanced configu is supposed to be a .png file. Animated GIF's can be used, but think they're supposed to be named something different. I'll have to check and update my post.
Click to expand...
Click to collapse
The initial (Boot) screen when you first power on your phone has to be flashed like a ROM. Then, if you have a GIF file named animated.gif* in the \Windows directory, that image will display before moving on to the Welcome screen. The Welcome Screen is a PNG image named welcomehead69.png (or welcomehead.69.png) also found in the \Windows directory.
* AT&T-based ROMs change the registry key defining the name of the animated GIF, so you will need to edit that key after placing the GIF file in \Windows.
Hope this clears everything up.
To replace the L26 Page you need to follow these instructions: http://forum.xda-developers.com/showthread.php?t=334907
Further info on Bootscreen (All types) can be found here: http://forum.xda-developers.com/showthread.php?t=421572
Oh and Grz NATF
Dave
NotATreoFan said:
The initial (Boot) screen when you first power on your phone has to be flashed like a ROM. Then, if you have a GIF file named animated.gif* in the \Windows directory, that image will display before moving on to the Welcome screen. The Welcome Screen is a PNG image named welcomehead69.png (or welcomehead.69.png) also found in the \Windows directory.
* AT&T-based ROMs change the registry key defining the name of the animated GIF, so you will need to edit that key after placing the GIF file in \Windows.
Hope this clears everything up.
Click to expand...
Click to collapse
That's right, i was thinking it was called animated.gif, but that seemed to obvious i guess, thanks for the info man. I actually have the animated boot screen disabled in my defautl settings xml that runs during my UC so i never really looked into changing it. I should definitely make a custom welcomehead file though and put it in my UC to copy over for my truely presonalize feel lol. I always end up switching my own favorite radios with teh ones cooked in on almost every rom i've downloaded. I really like the 1.59.42.15 radio, but no chef's bundle it...fortunately some wonderful minds around here made it easy for people to put whatever radio they want in a rom
tbryson92110 said:
Thank you for replying with no scolding or sarcasm! I really appreciate it!
I have used Adv-Config3 to change the splash screen so not to have AT&T logo staring at me, but 'No Joy'. I assume it has to be a .gif? Or will other file types work?
thank you in advance.
Click to expand...
Click to collapse
If it didn't change you'll have to flash it using a custom RUU because it is cooked in, you can learn how to do that here
Theme: To me, a theme just consists of button overlays to match the visual appearance of an OS environment.
Environment: To me, an environment consists of a working realtime customizable desktop, with custom scripts executed on button taps/ holds etc to simulate the useability of a OS environment.
EDIT: Sorry, so theme is the wrong word. I mean't environment in the subject title.
Well, I have searched the entire internet, but can't believe there is nothing that is worth using. Wisbar is lacking in vital functions needed to simulate a working Windows XP environment such as moveable windows which resize and minimize, draggable icons on the desktop, the list goes on. Projects are either no longer available, been suspended or even when they are available they are incompatible. I have tried various vista environments, and while they are somewhat visually similar to the real OS, they just aren't functional enough to use in everyday use. So, would anyone else agree that this is it as far as XP and vista environments go? If not, please reply and post some quality links to show what I haven't searched hard enough for and I'll kiss your boots .
dont you think that draggable resizable windows are a bit redundant on a windows mobile screen?
how many windows can you fit in such a small screen and actually work on them?
if you need that, i think that it is best that you look for a tablet with win7 in the near future
Because mobiles aren't desktops. You use alternative ways to navigate. You no longer focus on displaying as much info as possible, but instead focus on displaying it clearly and nicely.
well, I don't have a 24" screen on my phone, so what you are suggesting would be so tiny on your telephone it is rather impossible to work with neither will it be fingerfriendly for all day use. I already found the wisbar themes to tiny to use smoothly.
Of course a complete simulation will look nice, but for daily use it will be the most annoying thing to work with I guess.
Cheers,
Arnold
Hey thanks for replies. Yea, I guess you're right. It would be a pain to navigate etc. Suppose I'm a windows desktop fanatic who loves customisation too much . I don't know I just don't find windows mobile very customizable. I can't believe how hack-free the WM ROM is. I imagined being able to hack all the system files with resource hacker and change loads of things, but, none of that seems to work and the files are very well embedded into the system and are nothing but read-only.
What I'll try for now is playing around with Wisbar Advance and see if I can make it look similar to my winXP.
Cheers.
Reply
Hi i am also searching for the same thing and thanks for the info.
umangsain said:
Hi i am also searching for the same thing and thanks for the info.
Click to expand...
Click to collapse
From my gatherings, you'll have to be either very lucky or you'll just have to wait until something useable is developed. I'm working on a skin, but it'll only be for the TG01 and I can't program so it won't be amazing. It'll just really be a visual representation of my windows desktop, but I'm not using WAD because as soon as you lauch a WM dedicated program, you leave the windows environment. The only way this will ever work I think is for people to sort of embed the programs within a windows xp window within WAD, but from I have seen, WAD is unable to do this.
By the way, don't you think it's funny how Microsoft have put the start menu at the top of the screen? Seems like it's a way to make it impossible to have a start menu at the bottom of the screen.
I'll use wisbar advance 2 and see what i can come up with and if it's any good, I'll post it up.
P.S. Every single vista theme I have downloaded has not been compaible for my TG01 .
Tozzy2 said:
By the way, don't you think it's funny how Microsoft have put the start menu at the top of the screen? Seems like it's a way to make it impossible to have a start menu at the bottom of the screen.
Click to expand...
Click to collapse
latest versions of wm6.5.3 have the start menu at the bottom.. but it goes into fullscreen start menu
cchr said:
latest versions of wm6.5.3 have the start menu at the bottom.. but it goes into fullscreen start menu
Click to expand...
Click to collapse
If only this was an official release. I'd try it, but scared of hashing up my device.
Tozzy2 said:
If only this was an official release. I'd try it, but scared of hashing up my device.
Click to expand...
Click to collapse
i havent had any problems personally, and i havent heard of any serious problems.
and i have a comparably old device (i900 omnia)
you should try it and just keep a backup if you're afraid so you can revert to an official rom.
in my opinion, cooked roms are in their majority better than official ones
Tozzy2 said:
If only this was an official release. I'd try it, but scared of hashing up my device.
Click to expand...
Click to collapse
well,...
you better try it... and you'll be love it.
you can also change the icon you loved (JWMD icon changer)
n' the ROM is fully customable.
Trust me it's never ruins your gadget if you follow step by step totorial for upgrading. read for sure.
Tozzy2 said:
If only this was an official release. I'd try it, but scared of hashing up my device.
Click to expand...
Click to collapse
well,...
you better try it... and you'll be love it.
you can also change the icon you loved (JWMD icon changer)
n' the ROM is fully customable.
Trust me it's never ruins your gadget if you follow step by step totorial for upgrading. read for sure.
@ Tozzy2: have you tried this yet? http://forum.xda-developers.com/showthread.php?t=530269
i don't know how it is like coz it's just not my thing and i haven't tried it.
too complicated for me. but maybe you'll like it.
Flashing ROMs can be scary at first. Took 3 months to convince me.
Now I see I would have burnt my phone if it were not for custom ROMs.
Well, I was actually thinking of trying to flash a custom ROM, but then after reading this thread
lume999 said:
TG01 dead ... no longer works', remains in black screen ... help!! thanks !!!!!!
Click to expand...
Click to collapse
Source:
http://forum.xda-developers.com/showthread.php?t=654674
I am totally put off. It only takes for the phone to hang as it's installing or something and that's it, there's no way of getting back onto the homescreen again. Have thought about it, not worth it to be honest, I'll wait for an official release (if ever ones becomes available). As it is, ROM Extractor has buggered up my device it seems . Was using it last night to extract some EXEs and this morning, the start button was totally inoperable. That's literally all I did . Haven't modified the original ROM files in any way; like anyone could anyway,. they're completely hack-proof.
biernes_atrece said:
@ Tozzy2: have you tried this yet? http://forum.xda-developers.com/showthread.php?t=530269
i don't know how it is like coz it's just not my thing and i haven't tried it.
too complicated for me. but maybe you'll like it.
Click to expand...
Click to collapse
Thanks very much for the link, but unfortunately, I created this thread after trying this out lol. No offense to the guy who created it, it looks nice visually and clearly resembles the windows 7 theme, but it just doesn't have any functionality. Once you load up a program, as always, you're out of the desktop environment and the taskbar at the top becomes visible again. I think, someone really needs to fix this issue and then the problem will be solved (well almost). As for moveable windows and such, I agree it would make navigation quite awkward on the small screen, I guess that's the beauty of windows mobile, but I just wish there was more software available like in the desktop versions.
hi, does anyone know how to hard reset a t5353 Dual OS so that both Android and WM go back to factory settings?
i was able to do a reset on wm by going thru the settings and all but i'm having problems with android part of it.
HERE IS WHAT HAPPENED TO ANDROID OS!!!
i tried to calibrate the ANDROID screen and instead my finger, i used my stylus. It picked up my stylus during calibration but after that my screen stopped responding to any touch what so ever. i can press volume, windows, back buttons (or soft keys?) etc and they work just fine showing that the OS itself is working but it's not picking up anything on the screen. Actually, i did notice that when it is about to "sleep" and the lights get "dim", me touching on the screen wakes it up... any help would be appreciated....
i have tried the two of the following available HARD REST combination - neither one worked.
i also know that the touch screen itself is working because when i boot it in WM, the screen and everything else works just fine.
i've made a post in another thread but it's under WM area and my problem is with Android (for mods, just in case they think it's double posting--i'm sorry).
more info.
here is some more stuff that i've tried with the advice from adstrylight who was kind enough to spend some time on my problem
adstraylight said:
Android vs WM..
Which version of android do you have with your phone btw? Is it running from internal storage, or the sdcard(the easy way to tell this is if your SDcard contains a file called zimage or not)? I only ask as my phone originally came with android running from th SD, and was laggy/buggy beyond belief, and the latest version of A2.1 (the "fourth edition") is a world away in terms of stability etc.
Click to expand...
Click to collapse
not sure but when it boots, it shows the android logo (monkey or bugg or whatever it is), then it shows SOHO 2, and then shows a screen with "android" written on it...
no Zimage on SDcard. My device did not come with an SD card either and there is only one slot ( that i can see ) and it has my own SD card from before (which does not contain zimage). i even did a search on my entire phone and did not find zimage.
adstraylight said:
Don't know where this came from, but did you try pressing the zoom bar bellow where it says 'ok'? I only did this once, a long time ago, but this thought just occured to me over dinner....
Click to expand...
Click to collapse
yes, that is what i though initially. I was tapping all over the screen, trying to press "zoom out", trying to slide my finger towards "zoom out". I am not sure if it responded to me pressing over "OK" on the screen or "ZOOM OUT" or "CALL BUTTON" but it rebooted and did a hard reset. I was very happy at first only to find out that it only performed a hard reset on WM [very disappointing].
a_sun_of_beach said:
no Zimage on SDcard. My device did not come with an SD card either and there is only one slot ( that i can see ) and it has my own SD card from before (which does not contain zimage). i even did a search on my entire phone and did not find zimage.
Click to expand...
Click to collapse
I think, this device not use zImage and use bootloader.
DmK75 said:
I think, this device not use zImage and use bootloader.
Click to expand...
Click to collapse
i'm not sure what that means... someone asked me in a different post if there was an external SD with a file named zimage... and my answer was that the device itself did not come with an SD card, i installed my own and it does NOT have zimage file.
thanks in advance for anyone who can help.
anyone? i'd really appreciate any ideas.
It could mean that you have a very different setup, or perhaps that it's an Android OS clone. Are you able to install apps through Android Market place ?
shavenyaknz said:
It could mean that you have a very different setup, or perhaps that it's an Android OS clone. Are you able to install apps through Android Market place ?
Click to expand...
Click to collapse
i "was" able to download apps from market place but since the screen does not respond to me "touching an icon", i cant really do much (nothing at all).
NOTE: the screen does however respond when the back light turns dim, me touching the screen wakes it up.
Mann i don't understand how no one knows the answer. All the hackers and crackers making big softwares available to everyone, and no one knows why android OS is not responding to touch????
a_sun_of_beach said:
Mann i don't understand how no one knows the answer. All the hackers and crackers making big softwares available to everyone, and no one knows why android OS is not responding to touch????
Click to expand...
Click to collapse
Pardon?! You own a freaking clone which probably nobody else outside china owns and you are requesting any in deep assistance when nobody has the slightest knowledge about these fancy copy&paste devices?
Form you descriptions though, just to get that right... you had to calibrate your screen where you had to touch the 5 white boxes? If your Android installation is somehow a copy of the XDANDROID system which contains the touchscreen calibration app, then look for a file called "ts-calibration" on your device. Delete it and reboot into Android. (However that is done your device.)
Michael
mweirauch said:
Pardon?! You own a freaking clone which probably nobody else outside china owns and you are requesting any in deep assistance when nobody has the slightest knowledge about these fancy copy&paste devices?
Form you descriptions though, just to get that right... you had to calibrate your screen where you had to touch the 5 white boxes? If your Android installation is somehow a copy of the XDANDROID system which contains the touchscreen calibration app, then look for a file called "ts-calibration" on your device. Delete it and reboot into Android. (However that is done your device.)
Michael
Click to expand...
Click to collapse
1. thank you very much for your response. i will try to find the ts-calibration file and give it a try. i can upload the "rom" online, it says SOHO 2 when it's loading (if that helps?)
2. i think this device reboots like my samsung galaxy s, press and hold POWER and it asks you if you want to go in flight mode, power off etc.
i looked for this file, i actually did a search through my computer to see if i could find the "ts-calibration" but did not find it.
in WM section (using Resco Reg), i found a few .DLL files that had the word "touch" in them. One was "TouchRecognizer" and one was "touch.dll". i'm not sure which one exactly, but there were a few #s that changed after i did a caliberation ( on WM ). Is there a file in Android that's like that, maybe i could just copy those #s from WM into the .dll or something for Android?
thanks again for taking time to help.
No, you can't copy windows DLL to Android. I assume the only chance you have is searching the net, or some dedicated clone forums for the answer on how to reset your android installation.
Sent from my MSM using XDA App
a_sun_of_beach said:
i "was" able to download apps from market place but since the screen does not respond to me "touching an icon", i cant really do much (nothing at all).
NOTE: the screen does however respond when the back light turns dim, me touching the screen wakes it up.
Click to expand...
Click to collapse
Perhaps there is simply no Android?
DmK75 said:
Perhaps there is simply no Android?
Click to expand...
Click to collapse
i hope that the android i messed around with when i first received the phone, and saw all the setting etc was not an illusion? how can there be no android in it?
http://www.moon0755.com/
a_sun_of_beach said:
i hope that the android i messed around with when i first received the phone, and saw all the setting etc was not an illusion? how can there be no android in it?
http://www.moon0755.com/
Click to expand...
Click to collapse
I want to say, no working android.
Read and search in this topic, and you find custom roms.
Even with updated to 2.1 system.bin and data.bin android files.
DmK75 said:
I want to say, no working android.
Read and search in this topic, and you find custom roms.
Even with updated to 2.1 system.bin and data.bin android files.
Click to expand...
Click to collapse
thank you for your help. I have already been talking to some people in the link you just posted.
I've solved my issue by simply re-flashing it.
Thanks everyone who responded.
Does anyone have one of these, and if so, how far have you gotten in building new personalities? I would love to be able to edit the text files to control the sprites, but don't know how. Last I heard several years ago android78 was working on an editor to do this, but has since disappeared. I know how to change the mp3's, and rebuild the .vivo file, that's not the hard part. Those dang text files are. I am not even sure what they are written in. To me it doesn't even resemble any languages I have come across. Anyone out there? This thing would be bad to the bone with completely new personalities since Wowwee gave up on it too soon!
I just picked one up @ goodwill and agree it would be super cool. Unfortunately, mine has no files on it at all (the drive is blank when I plug in the USB cable) so it stays at "loading" with the progress bar at 0 even with a fresh vivo file in there. Does yours load a personality? If so, do you mind letting me know if there are more files in there besides the vivo?
If I can get mine to work I bet I could get some of the dev's at work to figure out the text file.
Thanks.
The original file was called Max_Simon.vivo. If yours has no files, try getting the Mr. Personality software from the Wowwee website, and then the original file and push it back onto him via USB and the software. I looked and all I could see are the .vivo files. The .vivo files can easily be seen if you rename it to a .zip and extract it. Before loading though it needs to be changed back. That's how I was able to work with the .mp3 files, but it does take the software to push it back onto him and then go into settings to pick a personality to load. If it is the only personality it should load automatically if the file is original and not corrupted. If you need either of the files, let me know and I will post them for you. That would be awesome to get someone to take a look at these files and let us know what we need to do. I know there are a lot of people out there with these sitting in closets because of the great support they threw and it, not. It's up to us now!
acemartini said:
I just picked one up @ goodwill and agree it would be super cool. Unfortunately, mine has no files on it at all (the drive is blank when I plug in the USB cable) so it stays at "loading" with the progress bar at 0 even with a fresh vivo file in there. Does yours load a personality? If so, do you mind letting me know if there are more files in there besides the vivo?
If I can get mine to work I bet I could get some of the dev's at work to figure out the text file.
Thanks.
Click to expand...
Click to collapse
Holy crap, I thought I was the only one who had this issue! Mine's been down for nearly 5 years by now; I happened to shut Mr. P off in the middle of recording a voice memo, and when I turned him back on he had the exact same symptoms with the loading screen as you mentioned. Now I made a topic on Robocommunity shortly after but all that was suggested in that thread didn't work at all. I don't know if I was doing anything wrong but after all this time it still doesn't work. It really disappoints me because this is actually a really cool robot that I always wanted to load up with my own personalities... and then it conks out.
If anyone could help figure out how to get this guy working, I'd be really grateful.
I know this is an old thread, but would appreciate anybody leading me to the Mr Personality software and the default voices for Max and Simon, as wowwee no longer lists these on their site. Thanks!
I got one and connect to my pc.There are some files of Max and Simon.I try to find some more personality files online,but failed. Is there anyone have them?Thanks.my email is mrmm[email protected]