[Q] Is any chance for my X8? - XPERIA X8 Q&A, Help & Troubleshooting

Hello everyone, is any chance to repair my X8? I tryed instal new rom, GingerDX. Every step was succes unless first boot. It stoped on SE logo. I tried flash it with flashtool, but when i connect phone with PC it asked me for turn on Unknown Sources and Debugging. But how if i can´t turn it on?
Can somebody help me? PLEASE

Domec18 said:
Hello everyone, is any chance to repair my X8? I tryed instal new rom, GingerDX. Every step was succes unless first boot. It stoped on SE logo. I tried flash it with flashtool, but when i connect phone with PC it asked me for turn on Unknown Sources and Debugging. But how if i can´t turn it on?
Can somebody help me? PLEASE
Click to expand...
Click to collapse
you don't need to turn on unknown sources. pull out the battery, put it in, don't turn on the phone, in flashtool click on flash-> choose the file you want to flash, pc will tell you that you need to hold back button and conect the phone. do it

fifo171 said:
you don't need to turn on unknown sources. pull out the battery, put it in, don't turn on the phone, in flashtool click on flash-> choose the file you want to flash, pc will tell you that you need to hold back button and conect the phone. do it
Click to expand...
Click to collapse
I did it but look....01/027/2012 01:27:56 - INFO - Start Flashing
01/027/2012 01:27:56 - INFO -
01/027/2012 01:27:56 - ERROR - Error flashing. Aborted
01/027/2012 01:27:56 - INFO - Now unplug the device and power it on
01/027/2012 01:27:56 - INFO - Then go to application settings
01/027/2012 01:27:56 - INFO - turn on Unknown Sources and Debugging
01/027/2012 01:27:58 - INFO - Device connected in flash mode
01/028/2012 01:28:24 - INFO - Device connected with USB debugging off
and what i should do now?

Well u stuck right? Use SEUS to restore 2.1, root back, install back xrecovery installer,do full wipe (must do this for once), flash GDX13, reboot, touch ur screen during sony ericsson logo appear, CWM will appear, flash GDX21, complete. GUD LUCK
-If u want, unlocked bootloader and flash alfs kernel v5. don forget to flash update file in cwm

Thanks but I can´t connect phone in SEUS. When it show me how to connect it I do it. But then my device manager shows that i connect Sony Ericsson USB Flash but after while it change for USB Mass Storage Device and there is error that device can´t turn on

Domec18 said:
Hello everyone, is any chance to repair my X8? I tryed instal new rom, GingerDX. Every step was succes unless first boot. It stoped on SE logo. I tried flash it with flashtool, but when i connect phone with PC it asked me for turn on Unknown Sources and Debugging. But how if i can´t turn it on?
Can somebody help me? PLEASE
Click to expand...
Click to collapse
Hi man, possibly in THIS THREAD you could find the solution to solve your problem, read carefully and good luck
If I helped you... HIT THE THANKS BUTTON!

Domec18 said:
Hello everyone, is any chance to repair my X8? I tryed instal new rom, GingerDX. Every step was succes unless first boot. It stoped on SE logo. I tried flash it with flashtool, but when i connect phone with PC it asked me for turn on Unknown Sources and Debugging. But how if i can´t turn it on?
Can somebody help me? PLEASE
Click to expand...
Click to collapse
There may be a simple solution,as you said it stops booting after flashing GDX.did you try a full wipe after flashing the rom?did you flashed it with CWM or xRec?

It stops before GDX and I flashed it with xRecovery. Still nothing, i still have only SE logo.....

You must install GingerDX with CWM Recovery. Only v013 and older can be installed with xRecovery

But how if I can´t instal CWM now?

You must reinstall stock firmware with FlashTool, SEUS or PC Companion first
forum.xda-developers.com/showthread.php?p=12442257

I know, I already tried it. Flashtool want Unknown sources and Debugging on, but I can´t turn it on because I can´t turn on phone. SEUS can´t find my phone, in Device manager X8 looks like Sony Ericsson USB Flash but after while it change to USB Mass Storage Device. And there is error because the device can´t be turned on. I tried it also through PCC. I tried repair it. But it can´t download software and I don´t know why.

FlashTool don't need Unknown sources and USB debugging to be turned on. It is only info what you need to do after flashing when phone boots up.
Do you have flash drivers installed?
Try to turn off your antivirus if you have it installed.
Can you try reinstall it on another computer?

I posted log from Flashtool here before.Here it is once again.....
01/005/2012 22:05:57 - ERROR - Please plug you device in flash mode
01/005/2012 22:05:58 - INFO - Searching Xperia....
01/005/2012 22:05:58 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&2FC9BD78&0&1
01/005/2012 22:05:58 - INFO - Start Flashing
01/005/2012 22:05:58 - INFO -
01/005/2012 22:05:58 - ERROR - Error flashing. Aborted
01/005/2012 22:05:58 - INFO - Now unplug the device and power it on
01/005/2012 22:05:58 - INFO - Then go to application settings
01/005/2012 22:05:58 - INFO - turn on Unknown Sources and Debugging
01/006/2012 22:06:01 - INFO - Device connected in flash mode
01/006/2012 22:06:19 - INFO - Device connected with USB debugging off
So I really don´t know what flashtool want from me.

So I tried every manual on xda. And nothing.

Here is my problem with Flashtool
Uploaded with ImageShack.us

im also facing tha same problem...so my request to all...plz help us to solve this problem
Thanks & Regards !

Domec18 said:
Here is my problem with Flashtool
Click to expand...
Click to collapse
Try with FlashTool 0.2.9.1

Still nothing, still the same error with Flashtool

Domec18 said:
Still nothing, still the same error with Flashtool
Click to expand...
Click to collapse
hey mate..look very scared i read all post here... and u did all the way and
only 1 chance left!
if your phone still under warranty u save your money...
sent to them and said u dont know why..
i did for my phone

Related

XPERIA X8 boot problem

I installed ICS on my XPERIA X8 and it freezes at boot. And I cannot go to recovery mode, where is my backup. I know I need to use FlashTool but I don't know how to use it, because it says:
03/021/2012 15:21:18 - INFO - <- This level is successfully initialized
03/021/2012 15:21:18 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
03/021/2012 15:21:18 - INFO - You can drag and drop ftf files here to start flashing them
03/021/2012 15:21:26 - INFO - Device disconnected
03/021/2012 15:21:38 - INFO - Device connected with USB debugging off
03/021/2012 15:21:38 - INFO - For 2011 devices line, be sure you are not in MTP mode
03/021/2012 15:21:49 - INFO - Please connect your device into flashmode.
03/021/2012 15:21:53 - INFO - Device disconnected
And I cannot flash the original image.
Hot to connect the phone?
With " Press and hold back button then plug in the usb cable"?
Now I can flash it but it isn't reboot just say device disconnected, then device connected in flash mode, then device disconnected, then flashing aborted
nearly the same problem here trying to unlock the bootloader on my E15i.
Would appreciate if anyone has a suggestion how to overcome this.Thanks
Try this
kowwi0515 said:
I installed ICS on my XPERIA X8 and it freezes at boot. And I cannot go to recovery mode, where is my backup. I know I need to use FlashTool but I don't know how to use it, because it says:
03/021/2012 15:21:18 - INFO - <- This level is successfully initialized
03/021/2012 15:21:18 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
03/021/2012 15:21:18 - INFO - You can drag and drop ftf files here to start flashing them
03/021/2012 15:21:26 - INFO - Device disconnected
03/021/2012 15:21:38 - INFO - Device connected with USB debugging off
03/021/2012 15:21:38 - INFO - For 2011 devices line, be sure you are not in MTP mode
03/021/2012 15:21:49 - INFO - Please connect your device into flashmode.
03/021/2012 15:21:53 - INFO - Device disconnected
And I cannot flash the original image.
Hot to connect the phone?
With " Press and hold back button then plug in the usb cable"?
Now I can flash it but it isn't reboot just say device disconnected, then device connected in flash mode, then device disconnected, then flashing aborted
Click to expand...
Click to collapse
IF you have stock ROM for X8, you can flash with flash tool..
the first, hold volume down in your phone and plug usb kabel to computer..
see your phone have green light, its flash mode.. )
and then go to flash tool, and all its works..
.
Thread moved to Q&A due to it being a question. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.
Dheny Brightside said:
IF you have stock ROM for X8, you can flash with flash tool..
the first, hold volume down in your phone and plug usb kabel to computer..
see your phone have green light, its flash mode.. )
and then go to flash tool, and all its works..
Click to expand...
Click to collapse
What?! First of all - not volume down but BACK button.
In flashtool directory You will have drivers folder. Install those drivers. Then reboot Your PC. Copy Your firmware package into firmwares in flashtool directory (.ftf files). Than run flashtool, click on flash, choose the package, click ok, flashtool will aks You to connect Your phone in flash mode. Plug USB cable into PC. Plug in USB cable into phone and while doing this You must hold back button. And flashtool should recognize Your device and start flashing.
Bolussimo said:
What?! First of all - not volume down but BACK button.
You must hold back button.
Click to expand...
Click to collapse
Thank you! You saved my phone's life!
I'm trying GingerDX now, and I making an ''XPERIA X8 MEGAPACK''
Anyway, I do not know why this is:
When I first installed gingerDX i have installed many apps. And when I'll removed this backup, and I installed this rom again, the phone freezes at the boot screen.
(I know how to do it. I flashed the stock rom from my backup, and It is working. But I cannot make a backup from this rom
Because You should do a full wipe When You install ROM again there are some files from old one. And this may cause boot problem
Hi, I've tried this but it doesn't work. My phone just keeps rebooting itself after SE logo animation is done. What can i do?
maretodoric said:
Hi, I've tried this but it doesn't work. My phone just keeps rebooting itself after SE logo animation is done. What can i do?
Click to expand...
Click to collapse
Boot loop...
Send from Brightside Room
Bolussimo said:
Because You should do a full wipe When You install ROM again there are some files from old one. And this may cause boot problem
Click to expand...
Click to collapse
I tried it but it isn't working =(
Boot prroblem ICS
I've tried ICS for stock kernel, but it isn't boot! But i want to try it!
Dude... just flash a stock SE rom via Flashtool and its done
Sent from my Nexus S using XDA Premium
Generally speaking, bootloops imply you are missing the x15 Baseband required for custom ROMs to work: Follow the mediafire link in B.Jay's profile and find the x15 Baseband corresponding to your X8 version (It's in the sticker under the battery)... Hope this helps.
EDIT: Update your FlashTool Version!!!! http://androxyde.github.com/Flashtool/

X8 Can't boot to flashmode

Hi guys, i don't know what happened but since the last time i flashed kernel, i can't boot to flashmode anymore.. I'm using nAa ICS 2 kernel and MiniCM9 3.0.1 by nAa.. I want to flash to nAa-ics-3 and then update to 3.0.2 but can't boot my phone to flashmode.. It just doesn't respond while I'm holding the back button.. Tried installing the LATEST version of flashtool, tried removing and reinstalling usb drivers, rebooting pc several times but nothing helps.
Flash tool just says that the phone is connected but usb debugging is off.. But when i boot it back into normal state, debugging is on, kernel and software is recognized and everything is working as it should..
Had the same problem using the latest version of FlashTool!
I then tried v 0.6.9.1 and it worked flawlessly, so try this version!
Still nothing.. Here's the output from the FlashTool
Code:
27/038/2012 13:38:07 - INFO - <- This level is successfully initialized
27/038/2012 13:38:07 - INFO - Flashtool Version 0.6.9.1 built on 2012-04-09 19:22:19
27/038/2012 13:38:07 - INFO - You can drag and drop ftf files here to start flashing them
27/038/2012 13:38:12 - INFO - Device connected with USB debugging on
27/038/2012 13:38:12 - INFO - Connected device : E15
27/038/2012 13:38:13 - INFO - Installed version of busybox : BusyBox v1.19.4-cm9 bionic (2012-03-17 17:50 +0100) multi-call binary.
27/038/2012 13:38:13 - INFO - Android version : 4.0.4 / kernel version : 2.6.29.6-nAa-ics-02
27/038/2012 13:38:13 - INFO - Root Access Allowed
27/038/2012 13:38:55 - INFO - Selected E15_nAa-ics-03_2.6.29.6-nAa-ics-03.ftf
27/038/2012 13:38:55 - INFO - Preparing files for flashing
27/038/2012 13:38:55 - INFO - Please connect your device into flashmode.
27/039/2012 13:39:01 - INFO - Device disconnected
27/040/2012 13:40:57 - INFO - Device connected with USB debugging off
27/040/2012 13:40:57 - INFO - For 2011 devices line, be sure you are not in MTP mode
I just can't figure it out.. :/
1 disconnect your device
2 in flashtool click on the flash icon -> flashmode -> select what you want to flash -> click ok
3 flashtool will say you to connect the phone while holding down the back key. do it
you need to connect the phone after flashtool says so, not before (according to the log, you connected the phone and then choosed file to flash)
Put on the stock rom (the one we get from the Sony) or backup u have of your stock rom.. then try to flash it..
You can get stock rom by using PC companion and update o repair or a ftf file from our own XDA...:thumbup:
fifo171 said:
1 disconnect your device
2 in flashtool click on the flash icon -> flashmode -> select what you want to flash -> click ok
3 flashtool will say you to connect the phone while holding down the back key. do it
you need to connect the phone after flashtool says so, not before (according to the log, you connected the phone and then choosed file to flash)
Click to expand...
Click to collapse
Still doesn't work.. I'm holding the back button while the phone is off and while I'm connecting the charger.. And still won't boot to flashmode.. And, as soon as i let go of the back button, the phone starts charging itself..
@sidhart
I'll try that on a weekend.. Now I'm afraid not to brick it xD i need it for work during the week.. If i brick it on a weekend, i will be able to buy a new one on time.. :/
Is your phone recognized by the PCC when you connect it?
Sent from my W8
Same thing happened with me the debugging was not detected when I first tried to unlock bootloader so I went back to the W8 stock rom and then it worked properly...
Try it only when there is no other way out...
Sent from my W8
Use SUES to revert back to stock rom/kernel and reflash from there. Also had this problem a few months back changing kernels.
With nAa and Alfs for cm7 kernels u dont have to hold back button it boots to flash mode automaticly when powered off and u plug the cable.
@sidhart The phone is recognized by PCC but as X10 not X8 xDDD So I'm afaid to revert to stock flash/kernel over PCC..
@Pipi14 I'm using nAa ICS kernel ( 02 ) for CM9, you think it might be the same?
maretodoric said:
@sidhart The phone is recognized by PCC but as X10 not X8 xDDD So I'm afaid to revert to stock flash/kernel over PCC..
@Pipi14 I'm using nAa ICS kernel ( 02 ) for CM9, you think it might be the same?
Click to expand...
Click to collapse
Try reinstaling the rom cm9 using cwm then it might work properly..
Dont forget factory reset and wipe data cache..
Reply me if you try it...
Sent from my W8
Yeah i have used nAa kernel from the beginning and all his kernels automaticly boot in to flashmode when turned off and plugging the cable. I used MiniCm9 3.0.2 for two days reverted back to MiniCm7 2.2.0 cuz Its kinda slow for me still. But maybe next release of MiniCm9 will be my daily rom.
Hit thanx if i helped.
OMG i didn't knew this.. It did work I've flashed the new kernel sucessfully Thanks a lot
maretodoric said:
OMG i didn't knew this.. It did work I've flashed the new kernel sucessfully Thanks a lot
Click to expand...
Click to collapse
Yaaaay
Click THANKS if I helped.
And if your generous donate to me please
Sent from my X8
maretodoric said:
Still doesn't work.. I'm holding the back button while the phone is off and while I'm connecting the charger.. And still won't boot to flashmode.. And, as soon as i let go of the back button, the phone starts charging itself..
:/
Click to expand...
Click to collapse
WORKED For Me in Xperia Pro with Official ICS.
Many Thanks
- Nazmul
pipi14 said:
Yeah i have used nAa kernel from the beginning and all his kernels automaticly boot in to flashmode when turned off and plugging the cable. I used MiniCm9 3.0.2 for two days reverted back to MiniCm7 2.2.0 cuz Its kinda slow for me still. But maybe next release of MiniCm9 will be my daily rom.
Hit thanx if i helped.
Click to expand...
Click to collapse
i have same problem like maretodoric..but my phone still can't boot to flashmode without holding back button or holding back button..any solution
my karnel nAa-ics-02 and my rom miniCM9 3.0.5
here the log flashtool :
Code:
02/022/2013 01:22:56 - INFO - <- This level is successfully initialized
02/022/2013 01:22:56 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
02/022/2013 01:22:56 - INFO - You can drag and drop ftf files here to start flashing them
02/023/2013 01:23:03 - INFO - Device connected with USB debugging on
02/023/2013 01:23:04 - INFO - Connected device : E15
02/023/2013 01:23:04 - INFO - Installed version of busybox : BusyBox v1.20.2-cm9 bionic (2012-07-14 01:52 +0200) multi-call binary.
02/023/2013 01:23:04 - INFO - Android version : 4.0.4 / kernel version : 2.6.29.6-nAa-ics-02 / Build number : IMM76L
02/023/2013 01:23:05 - INFO - Root Access Allowed
02/023/2013 01:23:44 - INFO - Selected E15_2.6.32.60-nAa-03.ftf
02/023/2013 01:23:44 - INFO - Preparing files for flashing
02/023/2013 01:23:45 - INFO - Please connect your device into flashmode.
02/023/2013 01:23:57 - INFO - Device disconnected
02/024/2013 01:24:13 - INFO - Device connected with USB debugging off
02/024/2013 01:24:13 - INFO - For 2011 devices line, be sure you are not in MTP mode
maretodoric said:
OMG i didn't knew this.. It did work I've flashed the new kernel sucessfully Thanks a lot
Click to expand...
Click to collapse
hey maretodoric..tell me how u boot to flash mode pleasee..step by step
Can't you read?
02/024/2013 01:24:13 - INFO - Device connected with USB debugging off
Click to expand...
Click to collapse
I'm not even gonna bother posting any more info as you've now enough ammo to search the forum and find the solution yourself.
Give a man a fish....

[Q] X8 flashing problems

Hi.
First of all I had GingerDX. Then I open recovery selected system/ and etc. all format, also full wipe. Then my phone turning on and only show Sony Ericsson.
Now I try to flash with flashtool. I installed x8 and gg drivers. Also have Sony PC but it turned off.
I try 3 diffident kernels, and get some errors:
9/048/2012 12:48:58 - ERROR - Error in processHeader : 995 : The I/O operation has been aborted because of either a thread exit or an application request.
29/048/2012 12:48:58 - ERROR - Error flashing. Aborted
sometimes get this:
29/011/2012 13:11:24 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
29/011/2012 13:11:24 - ERROR - Error flashing. Aborted
I think bootloader is unlocked because, and I can't unlock because phone not turn on
29/048/2012 12:48:26 - INFO - <- This level is successfully initialized
29/048/2012 12:48:27 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
29/048/2012 12:48:27 - INFO - You can drag and drop ftf files here to start flashing them
29/048/2012 12:48:35 - INFO - Device disconnected
29/048/2012 12:48:37 - INFO - Device connected in flash mode
Also try turned off antivirus, And get errors too. Also tried two pc. OS: windows 7
phone:
Xperia x8 E15i
8GB memory card.
Please help
do you have unlocked bootloader?
Sent from my X8 using xda app-developers app
is the bootloader unlocked???
enable usb debugging, and try again.
if it didnt work out, use another computer.
pretty much sure that your bootloader is not unlocked.
"First of all I had GingerDX. Then I open recovery selected system/ and etc. all format, also full wipe. Then my phone turning on and only show Sony Ericsson. "
it gets stuck at sony logo because you formatted the system.. there is no rom to boot
Yes.
Now I have second problem:
http://forum.xda-developers.com/showthread.php?t=1436957
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
HOW turn on phone in debugging mode?
I try turn phone to flash mode, but msm7227_semc.cmd file not working
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
sometimes it turn on deamon.
pauleee said:
Yes.
Now I have second problem:
http://forum.xda-developers.com/showthread.php?t=1436957
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
HOW turn on phone in debugging mode?
I try turn phone to flash mode, but msm7227_semc.cmd file not working
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
sometimes it turn on deamon.
Click to expand...
Click to collapse
boot rom .. go to settings then development and select USB debugging
then turn off the phone and connect
CnC-ROCK said:
boot rom .. go to settings then development and select USB debugging
Click to expand...
Click to collapse
I not have rom. My phone when I turn on only show SonyEricsson.
pauleee said:
I not have rom. My phone when I turn on only show SonyEricsson.
Click to expand...
Click to collapse
install a rom then...you cannot proceed without enabling USB debugging
CnC-ROCK said:
install a rom then...you cannot proceed without enabling USB debugging
Click to expand...
Click to collapse
I can't install rom because I not have kernel and not have recovery menu. I have it, if I flash kernel, I can flash kernel, if I have debugging...
pauleee said:
I can't install rom because I not have kernel and not have recovery menu. I have it, if I flash kernel, I can flash kernel, if I have debugging...
Click to expand...
Click to collapse
you have a kernel...a frigging stock kernel....use PC companion and install stock rom on it.. then enable the debugging
pauleee said:
Yes.
Now I have second problem:
http://forum.xda-developers.com/showthread.php?t=1436957
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
HOW turn on phone in debugging mode?
I try turn phone to flash mode, but msm7227_semc.cmd file not working
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
sometimes it turn on deamon.
Click to expand...
Click to collapse
for the unlocking proccess you need stock 2.1 eclair.
Bootloader unlocked, and getting some error
29/020/2012 19:20:31 - ERROR - Error in processHeader : 995 : The I/O operation has been aborted because of either a thread exit or an application request.
29/020/2012 19:20:31 - ERROR - Error flashing. Aborted
X8 flashing problems
Hey I will tell you what to do.
First of all install Sony Ericsson Update Service or SEUS. Just Google it and you can find it easily!
Now connect your phone to your computer via USB cable.
Start SEUS.
Then follow the on-screen instructions.(You will be asked to select your phone model,update or repair your phone etc)But its easy!!!!!
Then leave the rest to SEUS.
It will first repair your phone,then download the stock rom and kernel and also the baseband and will automatically install them.
After that you will have your X8 on stock rom,it will be updated to the latest baseband and kernel.
Now you will be able to comfortably restart your phone and you can install custom roms from here!!!!!
Don't forget to say THANKS!!!!!!!!!!!!!!!!!
Another kernel was installed with no errors. Why CM not install, but JB install?

[Help] Xperia sp stuck in repairing logo

Hello guys, im new in here, sorry for my bad english i`m just started to learn how good speak english.
anyway, i have torouble with xperia sp stuck in logo repair image in attachment
has been 2 days i`m charge xperia sp light still red and not detecting in flashmode to flash with flashtool and sony companion.
im spent 3 days to search how to fix this problem and i got nothing.
edit : many view but no answer
please help.
many thanks.
TMates said:
Hello guys, im new in here, sorry for my bad english i`m just started to learn how good speak english.
anyway, i have torouble with xperia sp stuck in logo repair image in attachment
has been 2 days i`m charge xperia sp light still red and not detecting in flashmode to flash with flashtool and sony companion.
im spent 3 days to search how to fix this problem and i got nothing.
edit : many view but no answer
please help.
many thanks.
Click to expand...
Click to collapse
Try to charge the phone for few hours and then flash stock rom via flashtool.
Rupant said:
Try to charge the phone for few hours and then flash stock rom via flashtool.
Click to expand...
Click to collapse
charge till green or not ? because my phone light is not getting green after 3 days.
thx for advice i`ll try.
TMates said:
charge till green or not ? because my phone light is not getting green after 3 days.
thx for advice i`ll try.
Click to expand...
Click to collapse
1. Download "C5303_12.1.A.1.207_AU.ftf" (Stock firmware) from here
2. Take of your back cover.
3. Open Flashtool (I expect you to have the Xperia SP drivers installed).
4. Turn off your phone by taking a pen and pressing the "off" hole and wait until it has vibrated 3x.
5. Press volume up (to get into flash mode) and connect your USB cable to the computer and wait until you get a green light.
6. Click on the flash icon in Flashtool and select flash mode. Now select the folder "Downloads" and select the "C5303_12.1.A.1.207_AU.ftf" file you have downloaded and wait 5-10 minutes.
hi, thx for advice.
I've done it and still does not work.
today i try again with charge and flashing my xperia.
TMates said:
hi, thx for advice.
I've done it and still does not work.
today i try again with charge and flashing my xperia.
Click to expand...
Click to collapse
Please click on "thanks" and what error do you get? Please tell us more.
CubeDev said:
Please click on "thanks" and what error do you get? Please tell us more.
Click to expand...
Click to collapse
still the same error stuck in repairing logo and when flashing always stuck in here my log :
23/005/2015 06:05:20 - INFO - <- This level is successfully initialized
23/005/2015 06:05:20 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
23/005/2015 06:05:25 - INFO - Device disconnected
23/005/2015 06:05:31 - INFO - Selected null
23/005/2015 06:05:31 - INFO - Flash canceled
23/006/2015 06:06:17 - INFO - Selected C5303 / 12.1.A.1.207 / AU
23/006/2015 06:06:17 - INFO - Preparing files for flashing
23/006/2015 06:06:31 - INFO - Please connect your device into flashmode.
23/006/2015 06:06:49 - INFO - Device connected in flash mode
23/006/2015 06:06:50 - INFO - Opening device for R/W
23/006/2015 06:06:50 - INFO - Reading device information
23/038/2015 06:38:43 - INFO - Unable to read from phone after having opened it.
23/038/2015 06:38:43 - INFO - trying to continue anyway
23/038/2015 06:38:43 - INFO - Start Flashing
23/038/2015 06:38:43 - INFO - Processing loader
23/038/2015 06:38:43 - INFO - Checking header
23/038/2015 06:38:43 - INFO - Ending flash session
23/038/2015 06:38:43 - ERROR - Error in processHeader : 2 : The system cannot find the file specified.
23/038/2015 06:38:43 - ERROR - Error flashing. Aborted
23/038/2015 06:38:49 - INFO - Device disconnected
23/052/2015 06:52:09 - INFO - Device connected with USB debugging off
23/052/2015 06:52:09 - INFO - For 2011 devices line, be sure you are not in MTP mode
23/052/2015 06:52:14 - INFO - Device disconnected
23/004/2015 07:04:34 - INFO - Device connected with USB debugging off
23/004/2015 07:04:34 - INFO - For 2011 devices line, be sure you are not in MTP mode
23/004/2015 07:04:39 - INFO - Device disconnected
23/050/2015 12:50:40 - INFO - Selected C5303 / 12.1.A.1.207 / AU
23/050/2015 12:50:40 - INFO - Preparing files for flashing
23/050/2015 12:50:58 - INFO - Please connect your device into flashmode.
23/051/2015 12:51:11 - INFO - Device connected in flash mode
23/051/2015 12:51:12 - INFO - Opening device for R/W
23/051/2015 12:51:12 - INFO - Reading device information
Click to expand...
Click to collapse
just stuck in there status and has several times i try results remain the same.
I've been looking at some of the threads with the same log problem remains unsuccessful.
sorry i use google translate and still bad.
Help
Hello. I have the same problem. I was just backing up my recovery ,all ok , installing new official ROM 12.1 from Cyanogenmod site , but then its says it only support C5030 or whatever and my device is 1bhuashan. Well , that was wierd for me. Then i gave up and just click reboot system now. And now im stuck on SONY logo . Well , sh*t. I did what you said , I downloaded FTF , all drivers for Xperia SP , then I moved to Flashmode , but it wont go to the Flash mode. Now its just waiting for flashmode . While I push Volume down to go to the flashmode , LED turn green , but after 10 sec , sony logo appear . I dont know what to do. Its bricked or what ? Im desperate . Please help
Kaneki Kun said:
Hello. I have the same problem. I was just backing up my recovery ,all ok , installing new official ROM 12.1 from Cyanogenmod site , but then its says it only support C5030 or whatever and my device is 1bhuashan. Well , that was wierd for me. Then i gave up and just click reboot system now. And now im stuck on SONY logo . Well , sh*t. I did what you said , I downloaded FTF , all drivers for Xperia SP , then I moved to Flashmode , but it wont go to the Flash mode. Now its just waiting for flashmode . While I push Volume down to go to the flashmode , LED turn green , but after 10 sec , sony logo appear . I dont know what to do. Its bricked or what ? Im desperate . Please help
Click to expand...
Click to collapse
You need to install drivers again. They seem to be broken. Are you using Windows 8.1??
If yes, then disable driver signature verification and then install the drivers again.
Kaneki Kun said:
Hello. I have the same problem. I was just backing up my recovery ,all ok , installing new official ROM 12.1 from Cyanogenmod site , but then its says it only support C5030 or whatever and my device is 1bhuashan. Well , that was wierd for me. Then i gave up and just click reboot system now. And now im stuck on SONY logo . Well , sh*t. I did what you said , I downloaded FTF , all drivers for Xperia SP , then I moved to Flashmode , but it wont go to the Flash mode. Now its just waiting for flashmode . While I push Volume down to go to the flashmode , LED turn green , but after 10 sec , sony logo appear . I dont know what to do. Its bricked or what ? Im desperate . Please help
Click to expand...
Click to collapse
If your device vibrates and/or shows a Sony logo, your device isn't bricked. This guide is also for you, @TMates | PLEASE FOLLOW SLOWLY ALONG
Follow this tutorial. (It was hard work):
http://forum.xda-developers.com/xperia-sp/general/tutorial-windows-8-1-10-driver-t3162123
Well , everything is fine , ftf is working , but theres another problem . It says , it need USB debbuging on , but i have no idea how to do it because the phone is dead.
---------- Post added at 04:26 PM ---------- Previous post was at 03:57 PM ----------
Actually , I have USB debugging on , but PC dont recognize it.
Kaneki Kun said:
Well , everything is fine , ftf is working , but theres another problem . It says , it need USB debbuging on , but i have no idea how to do it because the phone is dead.
---------- Post added at 04:26 PM ---------- Previous post was at 03:57 PM ----------
Actually , I have USB debugging on , but PC dont recognize it.
Click to expand...
Click to collapse
Debugging mode is only for a phone in turned on state.
When you flash the device you do it in Flashmode which has nothing to do with debugging mode on or off.
Just press the "Flash" button.
Select firmware from list.
Press OK, and go into Flashmode.
CubeDev said:
If your device vibrates and/or shows a Sony logo, your device isn't bricked. This guide is also for you, @TMates | PLEASE FOLLOW SLOWLY ALONG
Follow this tutorial. (It was hard work):
http://forum.xda-developers.com/xperia-sp/general/tutorial-windows-8-1-10-driver-t3162123
Click to expand...
Click to collapse
xperia sp untill today not going green light, thx sir for ur advice.
i`ll follow ur step and update here for progress.
thank you very much.
TMates said:
xperia sp untill today not going green light, thx sir for ur advice.
i`ll follow ur step and update here for progress.
Click to expand...
Click to collapse
Please do not skip any step.
Hello? Could you report?
CubeDev said:
Hello? Could you report?
Click to expand...
Click to collapse
sorry, i almost forgotten to update progress about my phone because i`m busy to fix it and now my xperia cant charging again, so desperate.
i have a plan to replace my battery and back to try your step and flash again.
btw, im not give up until my xperia sp work again.
really sorry.
TMates said:
sorry, i almost forgotten to update progress about my phone because i`m busy to fix it and now my xperia cant charging again, so desperate.
i have a plan to replace my battery and back to try your step and flash again.
btw, im not give up until my xperia sp work again.
really sorry.
Click to expand...
Click to collapse
Hi, did you solve the problem. Because I have exactly the same problem with you.

softbricked z3c

hi!
first off all thank you all for contributing to this forum, you guys really rule!
i have a problem....
as the title say i softbricked my z3 compact trying to flash MM on it.
i forgot to click the "allow unknown sources" on the phone before he procedure
i know, i`m stupid. my bad
but now when i tried to flash even stock kitkat on it the flashtool errors in one moment sayin "for flashtool unknown sources has to be enabled"
going thru the forum i saw a thread about the usb debugging mode
http://forum.xda-developers.com/showthread.php?t=2778437
he fixed it with using an older version of flashtool, but when i install an older version it asks to connect by pressing the back button not the volume down to enable flashing mode...
so i have 2 questions...
is there a way to flash without having the unknown sources on?
i installed the adb all-in-one but not successful to implement the command using the terminal
how to enable flashmode by using an older version when i dont have a back button? (its not arc s )
1. You don't need unknown sources enabled to flash
2. To flash hold down the volume down button while plugging your phone into the computer
Click the THIS LINK to my thread about a bricked Z3C
nzzane said:
1. You don't need unknown sources enabled to flash
2. To flash hold down the volume down button while plugging your phone into the computer
Click the THIS LINK to my thread about a bricked Z3C
Click to expand...
Click to collapse
dude, thanks for the answer, but read my post again, please
i KNOW you have to push the vol down button i was just asking is there any other way to connect the phone in flash mode to an older version of flashtool
anyway, today i tried again...
23/003/2016 21:03:26 - ERROR - Processing of system.sin finished with errors.
23/003/2016 21:03:26 - INFO - Ending flash session
23/003/2016 21:03:26 - ERROR - Read error :31 : A device attached to the system is not functioning.
23/003/2016 21:03:26 - ERROR - Error flashing. Aborted
23/003/2016 21:03:26 - INFO - Flashing finished.
23/003/2016 21:03:26 - INFO - Please unplug and start your phone
23/003/2016 21:03:26 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
23/003/2016 21:03:26 - INFO - Device disconnected
any thoughts?
k.a.b.0 said:
hi!
first off all thank you all for contributing to this forum, you guys really rule!
i have a problem....
as the title say i softbricked my z3 compact trying to flash MM on it.
i forgot to click the "allow unknown sources" on the phone before he procedure
i know, i`m stupid. my bad
but now when i tried to flash even stock kitkat on it the flashtool errors in one moment sayin "for flashtool unknown sources has to be enabled"
going thru the forum i saw a thread about the usb debugging mode
http://forum.xda-developers.com/showthread.php?t=2778437
he fixed it with using an older version of flashtool, but when i install an older version it asks to connect by pressing the back button not the volume down to enable flashing mode...
so i have 2 questions...
is there a way to flash without having the unknown sources on?
i installed the adb all-in-one but not successful to implement the command using the terminal
how to enable flashmode by using an older version when i dont have a back button? (its not arc s )
Click to expand...
Click to collapse
Do you have the the Sony drivers installed?
Did you install the ADB drivers (run the exe in the drivers folder within Flashtool folder). If you have Windows 10 this last step is difficult, you have to restart the machine in safe mode and disable driver signature checking.
You must have your phone turned off completely before you start (power button and volume up till you get three vibrations), leave it unplugged from the PC
Start flashtool and select which ftf you want to use, Exclude TA, press build. wait for the invitation from flashtool to plug your phone in. Then hold the volume down as you insert the usb plug, you can let go as soon as it starts doing something
There is a guide to the flashtool here, beware it's a powerful tool capable of bricking your phone

Categories

Resources