Related
Hello everyone, is any chance to repair my X8? I tryed instal new rom, GingerDX. Every step was succes unless first boot. It stoped on SE logo. I tried flash it with flashtool, but when i connect phone with PC it asked me for turn on Unknown Sources and Debugging. But how if i can´t turn it on?
Can somebody help me? PLEASE
Domec18 said:
Hello everyone, is any chance to repair my X8? I tryed instal new rom, GingerDX. Every step was succes unless first boot. It stoped on SE logo. I tried flash it with flashtool, but when i connect phone with PC it asked me for turn on Unknown Sources and Debugging. But how if i can´t turn it on?
Can somebody help me? PLEASE
Click to expand...
Click to collapse
you don't need to turn on unknown sources. pull out the battery, put it in, don't turn on the phone, in flashtool click on flash-> choose the file you want to flash, pc will tell you that you need to hold back button and conect the phone. do it
fifo171 said:
you don't need to turn on unknown sources. pull out the battery, put it in, don't turn on the phone, in flashtool click on flash-> choose the file you want to flash, pc will tell you that you need to hold back button and conect the phone. do it
Click to expand...
Click to collapse
I did it but look....01/027/2012 01:27:56 - INFO - Start Flashing
01/027/2012 01:27:56 - INFO -
01/027/2012 01:27:56 - ERROR - Error flashing. Aborted
01/027/2012 01:27:56 - INFO - Now unplug the device and power it on
01/027/2012 01:27:56 - INFO - Then go to application settings
01/027/2012 01:27:56 - INFO - turn on Unknown Sources and Debugging
01/027/2012 01:27:58 - INFO - Device connected in flash mode
01/028/2012 01:28:24 - INFO - Device connected with USB debugging off
and what i should do now?
Well u stuck right? Use SEUS to restore 2.1, root back, install back xrecovery installer,do full wipe (must do this for once), flash GDX13, reboot, touch ur screen during sony ericsson logo appear, CWM will appear, flash GDX21, complete. GUD LUCK
-If u want, unlocked bootloader and flash alfs kernel v5. don forget to flash update file in cwm
Thanks but I can´t connect phone in SEUS. When it show me how to connect it I do it. But then my device manager shows that i connect Sony Ericsson USB Flash but after while it change for USB Mass Storage Device and there is error that device can´t turn on
Domec18 said:
Hello everyone, is any chance to repair my X8? I tryed instal new rom, GingerDX. Every step was succes unless first boot. It stoped on SE logo. I tried flash it with flashtool, but when i connect phone with PC it asked me for turn on Unknown Sources and Debugging. But how if i can´t turn it on?
Can somebody help me? PLEASE
Click to expand...
Click to collapse
Hi man, possibly in THIS THREAD you could find the solution to solve your problem, read carefully and good luck
If I helped you... HIT THE THANKS BUTTON!
Domec18 said:
Hello everyone, is any chance to repair my X8? I tryed instal new rom, GingerDX. Every step was succes unless first boot. It stoped on SE logo. I tried flash it with flashtool, but when i connect phone with PC it asked me for turn on Unknown Sources and Debugging. But how if i can´t turn it on?
Can somebody help me? PLEASE
Click to expand...
Click to collapse
There may be a simple solution,as you said it stops booting after flashing GDX.did you try a full wipe after flashing the rom?did you flashed it with CWM or xRec?
It stops before GDX and I flashed it with xRecovery. Still nothing, i still have only SE logo.....
You must install GingerDX with CWM Recovery. Only v013 and older can be installed with xRecovery
But how if I can´t instal CWM now?
You must reinstall stock firmware with FlashTool, SEUS or PC Companion first
forum.xda-developers.com/showthread.php?p=12442257
I know, I already tried it. Flashtool want Unknown sources and Debugging on, but I can´t turn it on because I can´t turn on phone. SEUS can´t find my phone, in Device manager X8 looks like Sony Ericsson USB Flash but after while it change to USB Mass Storage Device. And there is error because the device can´t be turned on. I tried it also through PCC. I tried repair it. But it can´t download software and I don´t know why.
FlashTool don't need Unknown sources and USB debugging to be turned on. It is only info what you need to do after flashing when phone boots up.
Do you have flash drivers installed?
Try to turn off your antivirus if you have it installed.
Can you try reinstall it on another computer?
I posted log from Flashtool here before.Here it is once again.....
01/005/2012 22:05:57 - ERROR - Please plug you device in flash mode
01/005/2012 22:05:58 - INFO - Searching Xperia....
01/005/2012 22:05:58 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&2FC9BD78&0&1
01/005/2012 22:05:58 - INFO - Start Flashing
01/005/2012 22:05:58 - INFO -
01/005/2012 22:05:58 - ERROR - Error flashing. Aborted
01/005/2012 22:05:58 - INFO - Now unplug the device and power it on
01/005/2012 22:05:58 - INFO - Then go to application settings
01/005/2012 22:05:58 - INFO - turn on Unknown Sources and Debugging
01/006/2012 22:06:01 - INFO - Device connected in flash mode
01/006/2012 22:06:19 - INFO - Device connected with USB debugging off
So I really don´t know what flashtool want from me.
So I tried every manual on xda. And nothing.
Here is my problem with Flashtool
Uploaded with ImageShack.us
im also facing tha same problem...so my request to all...plz help us to solve this problem
Thanks & Regards !
Domec18 said:
Here is my problem with Flashtool
Click to expand...
Click to collapse
Try with FlashTool 0.2.9.1
Still nothing, still the same error with Flashtool
Domec18 said:
Still nothing, still the same error with Flashtool
Click to expand...
Click to collapse
hey mate..look very scared i read all post here... and u did all the way and
only 1 chance left!
if your phone still under warranty u save your money...
sent to them and said u dont know why..
i did for my phone
I installed ICS on my XPERIA X8 and it freezes at boot. And I cannot go to recovery mode, where is my backup. I know I need to use FlashTool but I don't know how to use it, because it says:
03/021/2012 15:21:18 - INFO - <- This level is successfully initialized
03/021/2012 15:21:18 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
03/021/2012 15:21:18 - INFO - You can drag and drop ftf files here to start flashing them
03/021/2012 15:21:26 - INFO - Device disconnected
03/021/2012 15:21:38 - INFO - Device connected with USB debugging off
03/021/2012 15:21:38 - INFO - For 2011 devices line, be sure you are not in MTP mode
03/021/2012 15:21:49 - INFO - Please connect your device into flashmode.
03/021/2012 15:21:53 - INFO - Device disconnected
And I cannot flash the original image.
Hot to connect the phone?
With " Press and hold back button then plug in the usb cable"?
Now I can flash it but it isn't reboot just say device disconnected, then device connected in flash mode, then device disconnected, then flashing aborted
nearly the same problem here trying to unlock the bootloader on my E15i.
Would appreciate if anyone has a suggestion how to overcome this.Thanks
Try this
kowwi0515 said:
I installed ICS on my XPERIA X8 and it freezes at boot. And I cannot go to recovery mode, where is my backup. I know I need to use FlashTool but I don't know how to use it, because it says:
03/021/2012 15:21:18 - INFO - <- This level is successfully initialized
03/021/2012 15:21:18 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
03/021/2012 15:21:18 - INFO - You can drag and drop ftf files here to start flashing them
03/021/2012 15:21:26 - INFO - Device disconnected
03/021/2012 15:21:38 - INFO - Device connected with USB debugging off
03/021/2012 15:21:38 - INFO - For 2011 devices line, be sure you are not in MTP mode
03/021/2012 15:21:49 - INFO - Please connect your device into flashmode.
03/021/2012 15:21:53 - INFO - Device disconnected
And I cannot flash the original image.
Hot to connect the phone?
With " Press and hold back button then plug in the usb cable"?
Now I can flash it but it isn't reboot just say device disconnected, then device connected in flash mode, then device disconnected, then flashing aborted
Click to expand...
Click to collapse
IF you have stock ROM for X8, you can flash with flash tool..
the first, hold volume down in your phone and plug usb kabel to computer..
see your phone have green light, its flash mode.. )
and then go to flash tool, and all its works..
.
Thread moved to Q&A due to it being a question. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.
Dheny Brightside said:
IF you have stock ROM for X8, you can flash with flash tool..
the first, hold volume down in your phone and plug usb kabel to computer..
see your phone have green light, its flash mode.. )
and then go to flash tool, and all its works..
Click to expand...
Click to collapse
What?! First of all - not volume down but BACK button.
In flashtool directory You will have drivers folder. Install those drivers. Then reboot Your PC. Copy Your firmware package into firmwares in flashtool directory (.ftf files). Than run flashtool, click on flash, choose the package, click ok, flashtool will aks You to connect Your phone in flash mode. Plug USB cable into PC. Plug in USB cable into phone and while doing this You must hold back button. And flashtool should recognize Your device and start flashing.
Bolussimo said:
What?! First of all - not volume down but BACK button.
You must hold back button.
Click to expand...
Click to collapse
Thank you! You saved my phone's life!
I'm trying GingerDX now, and I making an ''XPERIA X8 MEGAPACK''
Anyway, I do not know why this is:
When I first installed gingerDX i have installed many apps. And when I'll removed this backup, and I installed this rom again, the phone freezes at the boot screen.
(I know how to do it. I flashed the stock rom from my backup, and It is working. But I cannot make a backup from this rom
Because You should do a full wipe When You install ROM again there are some files from old one. And this may cause boot problem
Hi, I've tried this but it doesn't work. My phone just keeps rebooting itself after SE logo animation is done. What can i do?
maretodoric said:
Hi, I've tried this but it doesn't work. My phone just keeps rebooting itself after SE logo animation is done. What can i do?
Click to expand...
Click to collapse
Boot loop...
Send from Brightside Room
Bolussimo said:
Because You should do a full wipe When You install ROM again there are some files from old one. And this may cause boot problem
Click to expand...
Click to collapse
I tried it but it isn't working =(
Boot prroblem ICS
I've tried ICS for stock kernel, but it isn't boot! But i want to try it!
Dude... just flash a stock SE rom via Flashtool and its done
Sent from my Nexus S using XDA Premium
Generally speaking, bootloops imply you are missing the x15 Baseband required for custom ROMs to work: Follow the mediafire link in B.Jay's profile and find the x15 Baseband corresponding to your X8 version (It's in the sticker under the battery)... Hope this helps.
EDIT: Update your FlashTool Version!!!! http://androxyde.github.com/Flashtool/
Hi.
First of all I had GingerDX. Then I open recovery selected system/ and etc. all format, also full wipe. Then my phone turning on and only show Sony Ericsson.
Now I try to flash with flashtool. I installed x8 and gg drivers. Also have Sony PC but it turned off.
I try 3 diffident kernels, and get some errors:
9/048/2012 12:48:58 - ERROR - Error in processHeader : 995 : The I/O operation has been aborted because of either a thread exit or an application request.
29/048/2012 12:48:58 - ERROR - Error flashing. Aborted
sometimes get this:
29/011/2012 13:11:24 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
29/011/2012 13:11:24 - ERROR - Error flashing. Aborted
I think bootloader is unlocked because, and I can't unlock because phone not turn on
29/048/2012 12:48:26 - INFO - <- This level is successfully initialized
29/048/2012 12:48:27 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
29/048/2012 12:48:27 - INFO - You can drag and drop ftf files here to start flashing them
29/048/2012 12:48:35 - INFO - Device disconnected
29/048/2012 12:48:37 - INFO - Device connected in flash mode
Also try turned off antivirus, And get errors too. Also tried two pc. OS: windows 7
phone:
Xperia x8 E15i
8GB memory card.
Please help
do you have unlocked bootloader?
Sent from my X8 using xda app-developers app
is the bootloader unlocked???
enable usb debugging, and try again.
if it didnt work out, use another computer.
pretty much sure that your bootloader is not unlocked.
"First of all I had GingerDX. Then I open recovery selected system/ and etc. all format, also full wipe. Then my phone turning on and only show Sony Ericsson. "
it gets stuck at sony logo because you formatted the system.. there is no rom to boot
Yes.
Now I have second problem:
http://forum.xda-developers.com/showthread.php?t=1436957
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
HOW turn on phone in debugging mode?
I try turn phone to flash mode, but msm7227_semc.cmd file not working
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
sometimes it turn on deamon.
pauleee said:
Yes.
Now I have second problem:
http://forum.xda-developers.com/showthread.php?t=1436957
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
HOW turn on phone in debugging mode?
I try turn phone to flash mode, but msm7227_semc.cmd file not working
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
sometimes it turn on deamon.
Click to expand...
Click to collapse
boot rom .. go to settings then development and select USB debugging
then turn off the phone and connect
CnC-ROCK said:
boot rom .. go to settings then development and select USB debugging
Click to expand...
Click to collapse
I not have rom. My phone when I turn on only show SonyEricsson.
pauleee said:
I not have rom. My phone when I turn on only show SonyEricsson.
Click to expand...
Click to collapse
install a rom then...you cannot proceed without enabling USB debugging
CnC-ROCK said:
install a rom then...you cannot proceed without enabling USB debugging
Click to expand...
Click to collapse
I can't install rom because I not have kernel and not have recovery menu. I have it, if I flash kernel, I can flash kernel, if I have debugging...
pauleee said:
I can't install rom because I not have kernel and not have recovery menu. I have it, if I flash kernel, I can flash kernel, if I have debugging...
Click to expand...
Click to collapse
you have a kernel...a frigging stock kernel....use PC companion and install stock rom on it.. then enable the debugging
pauleee said:
Yes.
Now I have second problem:
http://forum.xda-developers.com/showthread.php?t=1436957
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
HOW turn on phone in debugging mode?
I try turn phone to flash mode, but msm7227_semc.cmd file not working
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
sometimes it turn on deamon.
Click to expand...
Click to collapse
for the unlocking proccess you need stock 2.1 eclair.
Bootloader unlocked, and getting some error
29/020/2012 19:20:31 - ERROR - Error in processHeader : 995 : The I/O operation has been aborted because of either a thread exit or an application request.
29/020/2012 19:20:31 - ERROR - Error flashing. Aborted
X8 flashing problems
Hey I will tell you what to do.
First of all install Sony Ericsson Update Service or SEUS. Just Google it and you can find it easily!
Now connect your phone to your computer via USB cable.
Start SEUS.
Then follow the on-screen instructions.(You will be asked to select your phone model,update or repair your phone etc)But its easy!!!!!
Then leave the rest to SEUS.
It will first repair your phone,then download the stock rom and kernel and also the baseband and will automatically install them.
After that you will have your X8 on stock rom,it will be updated to the latest baseband and kernel.
Now you will be able to comfortably restart your phone and you can install custom roms from here!!!!!
Don't forget to say THANKS!!!!!!!!!!!!!!!!!
Another kernel was installed with no errors. Why CM not install, but JB install?
Hi guys, I'm currently having problems with my z3c. All happened by accidentally flashing the wrong firmware. After all the wrong flashing now my phone won't turn on nor it will go to "flashmode" using the sidekey method. Only way to get in the phone is by doing "Fastboot" method! Is there anyway i can fix this brick by flashing a stock firmware using fastboot method?
Thanks!
Have you tried holding power, volume up and volume down all together then release all except volume down and connect to the PC (that is ready to flash with flashmode)? Which rom did you try to flash? Normaly you should also be able to enter flashmode.
How do you try to enter flashmode?:
"Power off the Xperia phone and then press and hold Volume Down button while creating the connection between the phone and the computer."
fastboot is only ment for AOSP roms like cyanogenmod other sonys opensource stuff which all require a unlocked bootloader.
MyPictures said:
Have you tried holding power, volume up and volume down all together then release all except volume down and connect to the PC (that is ready to flash with flashmode)? Which rom did you try to flash? Normaly you should also be able to enter flashmode.
How do you try to enter flashmode?:
"Power off the Xperia phone and then press and hold Volume Down button while creating the connection between the phone and the computer."
fastboot is only ment for AOSP roms like cyanogenmod other sonys opensource stuff which all require a unlocked bootloader.
Click to expand...
Click to collapse
Yeah man, i tried everything. Up down and power. I flashed the incorrect firmware for my Z3C, then after the reboot it didn't turn on. it's weird i can't even get into flashmode using the down key and power. Whenever i try the power button it gives 3 vibrates then doesn't turn on at all. Is it fully hard bricked or will i be able to fix this?
Wait, I solved the flashmode. I can access the flashmode now. But theres a problem, I can't flash a firmware using flashtools because my USB-debugging is off and i cannot access my phone to turn it on. Is there anyway i can flash a firmware without usb-debugging? I got all the working adb drivers & etc.... just my debugging is off
Have you tried downgrading/flashing to stock fw 23. 0.A.293 (Device D5803) and then you can root from there.
Norup58 said:
Have you tried downgrading/flashing to stock fw 23. 0.A.293 (Device D5803) and then you can root from there.
Click to expand...
Click to collapse
I can't flash anything, because of USB Debugging off, Flashtool will only allow you to flash if your Debugging is on, and i can't turn on my usb debugging as my phone is bricked.
I need help to find a way to flash the stock firmware!
Adzkii said:
I can't flash anything, because of USB Debugging off, Flashtool will only allow you to flash if your Debugging is on, and i can't turn on my usb debugging as my phone is bricked.
I need help to find a way to flash the stock firmware!
Click to expand...
Click to collapse
OK my bad....its just, this tut doesnt say anything about needing usb debugging active on the phone: http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614 and when I got my Z3C I had to downgrade in order to root and definitely didnt active usb debugging for that.
Norup58 said:
OK my bad....its just, this tut doesnt say anything about needing usb debugging active on the phone: http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614 and when I got my Z3C I had to downgrade in order to root and definitely didnt active usb debugging for that.
Click to expand...
Click to collapse
Those are the steps i'm exactly doing, but it gives me an error saying "You must turn on USB Debugging" etc...
What version of flashtools did you use if it didn't ask you for debugging?
Adzkii said:
Those are the steps i'm exactly doing, but it gives me an error saying "You must turn on USB Debugging" etc...
What version of flashtools did you use if it didn't ask you for debugging?
Click to expand...
Click to collapse
Cant remember if I have upgraded but my present verison is 0.9.18.5 dated 2015-02-14 which is around the time I got my phone....but can see in the tut they are using 0.9.10.2 if that helps.
And if you look at #5 in tut it says: INFO - Device connected with USB debugging off
0.9.10.2beta6 I've installed that version, i hope it works but doubt it.
EDIT: omg dude this version is actually working, It's flashing without usb debugging Thanks
Adzkii said:
0.9.10.2beta6 I've installed that version, i hope it works but doubt it.
EDIT: This version is just giving errors in RED!
Click to expand...
Click to collapse
Are you flashing KK 23. 0.A.293 or LP?
Norup58 said:
Are you flashing KK 23. 0.A.293 or LP?
Click to expand...
Click to collapse
lol i got it working on this version you said. Flashed lollipop
Adzkii said:
lol i got it working on this version you said. Flashed lollipop
Click to expand...
Click to collapse
Well good for you :good::good:
Adzkii said:
0.9.10.2beta6 I've installed that version, i hope it works but doubt it.
EDIT: omg dude this version is actually working, It's flashing without usb debugging Thanks
Click to expand...
Click to collapse
Norup58 said:
OK my bad....its just, this tut doesnt say anything about needing usb debugging active on the phone: http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614 and when I got my Z3C I had to downgrade in order to root and definitely didnt active usb debugging for that.
Click to expand...
Click to collapse
I'm having similar problems.
I'm trying to flash 23.4.A.0.546 lollipop but with latest flashboot version needs debugging on so I've downloaded and installed 0.9.10.2beta6 but when I try to flash the rom it says "please connect device in flashmode", If I disconnect the phone and then connect it again it will say "device disconnected" and then "device connected in flashmode" but nothing happens... Did you do anything in particular to bypass debugging mode needed problem?
InvisibleKnight said:
I'm having similar problems.
I'm trying to flash 23.4.A.0.546 lollipop but with latest flashboot version needs debugging on so I've downloaded and installed 0.9.10.2beta6 but when I try to flash the rom it says "please connect device in flashmode", If I disconnect the phone and then connect it again it will say "device disconnected" and then "device connected in flashmode" but nothing happens... Did you do anything in particular to bypass debugging mode needed problem?
Click to expand...
Click to collapse
I know its a pain in the bu.. but may I suggest you start from scratch. Use this tutorial: http://forum.xda-developers.com/z3-c...-keys-t3013343
Norup58 said:
I know its a pain in the bu.. but may I suggest you start from scratch. Use this tutorial: http://forum.xda-developers.com/z3-c...-keys-t3013343
Click to expand...
Click to collapse
link is brocken
I have a xz3c with hard brick,
phone does not vibrate when holding vol+ and power together
no usb debugging
PC can't detect your phone with vol-
led reaction if phone is connected to PC, on color red, for 3 seconds, but no up or down volume for debugging
pc search for drivers and install it
flashtool 9.18.6 shows:
05/015/2015 07:15:45 - INFO - Device connected with USB debugging off
05/015/2015 07:15:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
disconnect it, and then ...
05/015/2015 07:20:58 - INFO - Device disconnected
Zero-21XX said:
link is brocken
I have a xz3c with hard brick,
phone does not vibrate when holding vol+ and power together
no usb debugging
PC can't detect your phone with vol-
led reaction if phone is connected to PC, on color red, for 3 seconds, but no up or down volume for debugging
pc search for drivers and install it
flashtool 9.18.6 shows:
05/015/2015 07:15:45 - INFO - Device connected with USB debugging off
05/015/2015 07:15:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
disconnect it, and then ...
05/015/2015 07:20:58 - INFO - Device disconnected
Click to expand...
Click to collapse
Sorry about the broken link. Here's the correct one: http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
Zero-21XX said:
link is brocken
I have a xz3c with hard brick,
phone does not vibrate when holding vol+ and power together
no usb debugging
PC can't detect your phone with vol-
led reaction if phone is connected to PC, on color red, for 3 seconds, but no up or down volume for debugging
pc search for drivers and install it
flashtool 9.18.6 shows:
05/015/2015 07:15:45 - INFO - Device connected with USB debugging off
05/015/2015 07:15:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
disconnect it, and then ...
05/015/2015 07:20:58 - INFO - Device disconnected
Click to expand...
Click to collapse
It is possible your device is powered on but the screen is not working (I remember this from the Z1 root procees that required flashing a wrong firmware).
Try to force power down your phone first (press and hold power & volume up for 5 seconds) without the usb cable and reenter flashmode by holding volume down while inserting the usb cable.
kind3r said:
It is possible your device is powered on but the screen is not working (I remember this from the Z1 root procees that required flashing a wrong firmware).
Try to force power down your phone first (press and hold power & volume up for 5 seconds) without the usb cable and reenter flashmode by holding volume down while inserting the usb cable.
Click to expand...
Click to collapse
maybe but led should be turn green
when pc rebot and shows:
Zero-21XX said:
maybe but led should be turn green
when pc rebot and shows:
Click to expand...
Click to collapse
Did you install the drivers from flashtool ? For windows 8-10 you have to boot with disable driver verification or something similar. You can find a tutorial here http://forum.xda-developers.com/xpe...rs-windows-t2638680/post50100353#post50100353
When pressing volume up and plugging in the phone I get "26/025/2017 13:25:15 - INFO - Device connected in fastboot mode", but when doing volume down, all I get in the flashtool program is "26/011/2017 13:11:56 - INFO - Device connected with USB debugging off
26/011/2017 13:11:56 - INFO - For 2011 devices line, be sure you are not in MTP mode", so I can't install any of the ftf files downloaded using flashtool. Does anyone know how to fix this?
"26/011/2017 13:11:56 - INFO - Device connected with USB debugging off
Click to expand...
Click to collapse
Try enabling USB debugging.
Settings > About phone > Tap multiple times on Build number until Developer options is enabled
Settings > Developer options > USB debugging > Toggle ON
Viruz32 said:
When pressing volume up and plugging in the phone I get "26/025/2017 13:25:15 - INFO - Device connected in fastboot mode", but when doing volume down, all I get in the flashtool program is "26/011/2017 13:11:56 - INFO - Device connected with USB debugging off
26/011/2017 13:11:56 - INFO - For 2011 devices line, be sure you are not in MTP mode", so I can't install any of the ftf files downloaded using flashtool. Does anyone know how to fix this?
Click to expand...
Click to collapse
1] Flashtool doesn't work with the XZ1c. So stop trying to use it.
- Use newflasher instead.
- Newflasher doesn't use FTF files. It uses the files directly as downloaded by XperiFirm
- READ the newflasher instructions.
2] To put the phone in bootloader mode, you have to:
- Turn it off.
- Hold Vol-
- Plug phone into computer.
- In that order.
3] All of this information is available by searching the XZ1c forums. So I suggest you do a lot more reading before trying to flash your phone, because otherwise you're guaranteed to break something.
Old thread is old but for everyone they have the same issues like me right now it is very important!
FLASHTOOL DOESN'T WORK AT ALL FOR XZ1 COMPACT!
Fun thing this post is the ONLY ONE they mention this AT ALL. To say "You have to do a lot more reading" is wrong because i never heard this before in this clear state. Mostly thje devs or vet are "recommend" one of both.
Like the also very important information that Device decryption IS ON BY DEFAULT NOW and it is written in the code by GOOGLE. So aside to compile your very own ROM there is no easy way to get around these pesky "No write permission for Apps" issues on the Phones SD Card.
muhschaf said:
FLASHTOOL DOESN'T WORK AT ALL FOR XZ1 COMPACT!
Click to expand...
Click to collapse
What didn't work? According to the Flashtool change log support for the XZ1 compact was added in version 0.9.24.3.
pbarrette said:
1] Flashtool doesn't work with the XZ1c. So stop trying to use it.
- Use newflasher instead.
- Newflasher doesn't use FTF files. It uses the files directly as downloaded by XperiFirm
- READ the newflasher instructions.
2] To put the phone in bootloader mode, you have to:
- Turn it off.
- Hold Vol-
- Plug phone into computer.
- In that order.
3] All of this information is available by searching the XZ1c forums. So I suggest you do a lot more reading before trying to flash your phone, because otherwise you're guaranteed to break something.
Click to expand...
Click to collapse
Hello
My xperia xz1 G8342 is dead. No response when i press any key/ key combination like buttons are dead. It only light up and shows sony logo, a triangular repair sign, and then charging sign when it connect to charger or PC.
Is there any suggestion to fix it.
Thanks
Winux_Aung said:
Hello
My xperia xz1 G8342 is dead. No response when i press any key/ key combination like buttons are dead. It only light up and shows sony logo, a triangular repair sign, and then charging sign when it connect to charger or PC.
Is there any suggestion to fix it.
Thanks
Click to expand...
Click to collapse
Try THIS