[Q] [HELP] after flash kernel nAa-08 can't boot my x8 - XPERIA X8 Q&A, Help & Troubleshooting

Please help me....
after i flash basic kernel to nAa-08, i turn on my phone i have nAa-08 splash screen and i stuck in black screen not in sony ericsson...
please help me master in this forum...

which rom are you using?

xcutioner said:
Please help me....
after i flash basic kernel to nAa-08, i turn on my phone i have nAa-08 splash screen and i stuck in black screen not in sony ericsson...
please help me master in this forum...
Click to expand...
Click to collapse
Did you unlocked your bootloader? if not, it will not work. Were you able to go into CWM?

thanks all master
now black screen on my x8 solved but i have problem with network not detected or error....
please help master on this forum....

i got the same "no network problem..
lasttime i just sent to SE
but u can try to going back to stock and dont unlockbootloader

nAa-08b
am using nAa-08b i used nAa-08 but never had the wifi issues i have no problem with this using miniCm7 2.1.6, the only issues i have is that data does not work properly i have to enable/disable mobile data on some ocassions cause it wont load anything at all, but as far from that no problems hope this help and if you are not having this problem let me know thanks

xcutioner said:
Please help me....
after i flash basic kernel to nAa-08, i turn on my phone i have nAa-08 splash screen and i stuck in black screen not in sony ericsson...
please help me master in this forum...
Click to expand...
Click to collapse
did you follow the unlock bootloader guide properly?? if you did confirm that your x8 can be unlocked, just flash back to stock kernel and try again!
the black screen was cause you hadnt flashed any rom!
try it!!
and make sure you follow all instructions to the last letter!

I have also same problem.
My phone got bricked today after succesfully unlocking bootloader, and flashing latest nAa kernel in combo with gingerxperia v21. Phone just stuck on bootloop first time, and when i after hour or more on that, pulled battery off, and start on the phone again, it just stayed all time on logo of nAa kernel.
After that i flashed default kernel and default rom 2.1.1. and phone works flawlessly, but doesn't work in any combo of nAa kernel+rom, or with alfs kernel+other roms.
I can't see where is problem if unlocking bootloader goes succesfully, i got r instead of R letter when unlocking bootloader passes.

xcutioner said:
thanks all master
now black screen on my x8 solved but i have problem with network not detected or error....
please help master on this forum....
Click to expand...
Click to collapse
How did you fix it because I have the same problem.

and oresigat
xcutioner said:
Please help me....
after i flash basic kernel to nAa-08, i turn on my phone i have nAa-08 splash screen and i stuck in black screen not in sony ericsson...
please help me master in this forum...
Click to expand...
Click to collapse
maybe i use a nAa-14

Related

[Q] Boot Loop Problem

I'm stuck up with sony ericsson logo after installing the ROM CM 7.1. How to fix this issue.
Use PCC/SEUS to flash back stock ROM
Because you didn't click "full wipe" !
And u even just didnt bothered searching before posting...
omg is your s bootloader unlocked did you change kernel to nAa and post in Q/A
Actually what i did was , First i installed Ginger Dx, i can't use the phone continiously if too many apps are installed the phone get's restarted often. so i planned to change cm7.1. so i did wipe/reset data , after that i installed the CM7.1 ROM.The phone is stuck up with the sony ericsson logo screen. I heard by flash boot the image file will rectify this problem is it correct?
Mayank77 said:
Use PCC/SEUS to flash back stock ROM
Click to expand...
Click to collapse
PCC/SEUS -> is this a software or something else, how to use this. I dono what it is can you pls help me
Vigneshj said:
PCC/SEUS -> is this a software or something else, how to use this. I dono what it is can you pls help me
Click to expand...
Click to collapse
PCC= Sony PC Companion.
SEUS= Sony Update service.
Download programs. They are for updating our phone (and other sony phones).
We use them for repairing (we click on update and program say "you have latest android version or something like that and "do you want to repair it" !
With thoose 2 programs we fix soft brick...!
I'm stuck at SE screen too..but I was restoring a backup of gingerdx and my led isn't working when connected to pc...Tell me this is fixable please...
bore1989 said:
I'm stuck at SE screen too..but I was restoring a backup of gingerdx and my led isn't working when connected to pc...Tell me this is fixable please...
Click to expand...
Click to collapse
do you mean in flash mode ??? or turn on mode ??

[Q] How to Rectify Bootloop Problem using Flash Tool

I was stuck up with Sony ericsson logo after installing the ROM CM7.1 , i tried to rectify this problem using flash tool but i couldn't. Please help me on this.
Vigneshj said:
I was stuck up with Sony ericsson logo after installing the ROM CM7.1 , i tried to rectify this problem using flash tool but i couldn't. Please help me on this.
Click to expand...
Click to collapse
Did you unlocked your bootloader ? And which CM rom are you using exactly ?
Vigneshj said:
I was stuck up with Sony ericsson logo after installing the ROM CM7.1 , i tried to rectify this problem using flash tool but i couldn't. Please help me on this.
Click to expand...
Click to collapse
relax dude!
maybe you can try this!
- first download X8 E15i 2.1.1.C.0.0._un.ftf from filecrop
put in the firmware folder on Flashtool
- flash that kernel, so you get your phone in 2.1
- root your phone with flash tool by clicking the cross icon
-unlock bootloader (remember do not unlock BL for 11w29+)
- flash the kernel
- backup
- factory reset, wipe data, etc
- flash your ROM
Done! :laugh:
hi every1. im new to this kind of thing. i got a notification from cyanogenmod saying that there was an update avalible for my phone. i then downloaded it and installed it using cwm. i chose the default install option and when my phone rebooted itself, its just stuck on the sony ericsson logo. i know this is called a bootloop but i tried to boot into cwm (by rapidly pressing back when the SE logo appears) but nothing hapened. i took the battery out and when i went ot press the power button the phone turned no itself and is just stuck at the SE logo. can some1 pls help me :-(
s3nbon5akura said:
hi every1. im new to this kind of thing. i got a notification from cyanogenmod saying that there was an update avalible for my phone. i then downloaded it and installed it using cwm. i chose the default install option and when my phone rebooted itself, its just stuck on the sony ericsson logo. i know this is called a bootloop but i tried to boot into cwm (by rapidly pressing back when the SE logo appears) but nothing hapened. i took the battery out and when i went ot press the power button the phone turned no itself and is just stuck at the SE logo. can some1 pls help me :-(
Click to expand...
Click to collapse
You should flash using flash tool to solve it
praveenkumarkm8 said:
You should flash using flash tool to solve it
Click to expand...
Click to collapse
how do i do that? sorry about this
s3nbon5akura said:
how do i do that? sorry about this
Click to expand...
Click to collapse
Here read these..
http://forum.xda-developers.com/showthread.php?t=1755215
Hit thanx if it helped..
Sent from my LEWA using xda premium
And here's the .ftf file of stock rom...
Sent by the walking walkman..
BlackRabbit1703 said:
relax dude!
maybe you can try this!
- first download X8 E15i 2.1.1.C.0.0._un.ftf from filecrop
put in the firmware folder on Flashtool
- flash that kernel, so you get your phone in 2.1
- root your phone with flash tool by clicking the cross icon
-unlock bootloader (remember do not unlock BL for 11w29+)
- flash the kernel
- backup
- factory reset, wipe data, etc
- flash your ROM
Done! :laugh:
Click to expand...
Click to collapse
Thanks for ur information, I tried all those steps mentioned above. Now my phone is working fine. Now I installed GingerDX 028b

[Q] Xperia X8 kernel flash problems

Hello guys,
I got a problem you all might only be able to help me. I successfully rooted,unlocked bootloader,flashed E15_nAa-ics-03_2.6.29.6-nAa-ics-03.ftf and installed MINIcm9 3.0.2 shakira on my Xperia X8. The rom itself acted a bit slow and the wifi was dropping so i decided to reflash the kernel on E15_nAa-ics-03_2.6.29.6-nAa-ics-04.ftf and put MINIcm9 3.0.5 shakira on the phone. But after i flashed the newer kernel the phone just got blank black screen with no reaction whatsoever. I used SUS to bring the phone back from the dead and started over again used SE tweaker tool to root the phone then unlocked bootloader with S1 tool which reported lowercase r as a sign of unlocked bootloader and flashed the old kernel E15_nAa-ics-03_2.6.29.6-nAa-ics-03.ftf again. And no recovery menu just blank screen again i didnt miss anything im open for any ideas.
1.Should i first try to relock the booloader after i revive the phone?
2.Am i totaly F*** and have to deal with the fact that phone stays on Android 2.1?
btw.. I used Flashtoolx64 ver, 0.9.9.0 it worked perfectly first time. I have all drivers for the process.
Thanks for the help fellas im counting on you all
Gamer978 said:
Hello guys,
I got a problem you all might only be able to help me. I successfully rooted,unlocked bootloader,flashed E15_nAa-ics-03_2.6.29.6-nAa-ics-03.ftf and installed MINIcm9 3.0.2 shakira on my Xperia X8. The rom itself acted a bit slow and the wifi was dropping so i decided to reflash the kernel on E15_nAa-ics-03_2.6.29.6-nAa-ics-04.ftf and put MINIcm9 3.0.5 shakira on the phone. But after i flashed the newer kernel the phone just got blank black screen with no reaction whatsoever. I used SUS to bring the phone back from the dead and started over again used SE tweaker tool to root the phone then unlocked bootloader with S1 tool which reported lowercase r as a sign of unlocked bootloader and flashed the old kernel E15_nAa-ics-03_2.6.29.6-nAa-ics-03.ftf again. And no recovery menu just blank screen again i didnt miss anything im open for any ideas.
1.Should i first try to relock the booloader after i revive the phone?
2.Am i totaly F*** and have to deal with the fact that phone stays on Android 2.1?
btw.. I used Flashtoolx64 ver, 0.9.9.0 it worked perfectly first time. I have all drivers for the process.
Thanks for the help fellas im counting on you all
Click to expand...
Click to collapse
Try to redownload the kernel and reflash it again. Or you can try to flash other kernel to see what happens. If the other kernel works, maybe the problem is in your ftf file.
apaan said:
Try to redownload the kernel and reflash it again. Or you can try to flash other kernel to see what happens. If the other kernel works, maybe the problem is in your ftf file.
Click to expand...
Click to collapse
Tryed still blank screen the phone hates me thats why it's doing it >:/

[Q] my X8 is dead plzzzz help !!!!!!!!!

I have Xperia X8 with unlocked boot-loader using nAa kernel 14 gb and running android 2.3.7 jelly bread
I was trying to flash nAa jb 03 kernel via flashtool but for some reason the flash was aborted although I did the usual drill ... i tried flashing it back but no result it didnt work.
after that I tried to power up the phone and the led goes green and the phone vibrate and then nothing .... no light on the screen no boot animation just like that..... flashmode is still working i guess....
so I was searched here in xda for a solution and I found out that flashing back to stock kernel should help it via SEUS
so I just wanna make sure Im doing the right thing .... please give me any suggestion ..... its still early to say food bye to my lovely phone
Root97 said:
I have Xperia X8 with unlocked boot-loader using nAa kernel 14 gb and running android 2.3.7 jelly bread
I was trying to flash nAa jb 03 kernel via flashtool but for some reason the flash was aborted although I did the usual drill ... i tried flashing it back but no result it didnt work.
after that I tried to power up the phone and the led goes green and the phone vibrate and then nothing .... no light on the screen no boot animation just like that..... flashmode is still working i guess....
so I was searched here in xda for a solution and I found out that flashing back to stock kernel should help it via SEUS
so I just wanna make sure Im doing the right thing .... please give me any suggestion ..... its still early to say food bye to my lovely phone
Click to expand...
Click to collapse
just flash the stock firmware using flashtool
download it from my signature
BlackRabbit1703 said:
just flash the stock firmware using flashtool
download it from my signature
Click to expand...
Click to collapse
Thnx ^_^ its appreciated .... any idea about the cause of the problem ?

[Q] Sony Xperia V Black Screen

Please help! ive intalled this ROM http://forum.xda-developers.com/showthread.php?t=2756501 but after the aroma 1 ive get this Black Screen. first ive flashmode my Xperia V (LT25i_9.2.A.1.210_1268-6904_customized_nordic (on xda)) and after that ive fastboot Doomkernel V.7,. after that its works fine ive installed this ROM the NewAroma1 but after that ive get this black screen, no logo. please help, its only a BLACK SCREEN. after that ive flashmode my Xperia in (LT25i_9.0.1.D.0.10_Nordic) after that its only a BLACK SCREEN but ive heard some TICK sound, ive heard that someone text me BUT its only a BLACK SCREEN,. please help :crying:
Try recovery with PCC or SEUS, make sure your bootloader is unlocked before flashing the kernel
vinisk7 said:
Try recovery with PCC or SEUS, make sure your bootloader is unlocked before flashing the kernel
Click to expand...
Click to collapse
how to do that? please help me
kinglong1414 said:
how to do that? please help me
Click to expand...
Click to collapse
It appears that you still have locked bootloader and you flashed custom kernel. You can repair it via pc companion
"gadgets need love too"

Categories

Resources