Hey xda,
it seem ive "bricked" my phone.it would just go on and only show the "sony ericsson" screen and does nothing else,it would always reboot to the same screen and nothing else.
Please help,thanks
thu001 said:
Hey xda,
it seem ive "bricked" my phone.it would just go on and only show the "sony ericsson" screen and does nothing else,it would always reboot to the same screen and nothing else.
Please help,thanks
Click to expand...
Click to collapse
Restore a backup or flash a new rom using xrecovery or cwm recovery. If that's not possible then use flashtool to flash original firmware back. There is a guide here http://forum.xda-developers.com/showthread.php?t=1011071
Dont worry, just follow the steps in the link (http://forum.xda-developers.com/showpost.php?p=11934117&postcount=7). It should be fine as i bricked my phone before to0..
Hi thanks for the responses but i cant seem to find the repair funtion on pc companion so had to take the long cut by flashing my phone.anyways thanks for the help.
Sent from my E15i using XDA App
use SEUS ..Best one for reflashing original rom..
Please help me....
after i flash basic kernel to nAa-08, i turn on my phone i have nAa-08 splash screen and i stuck in black screen not in sony ericsson...
please help me master in this forum...
which rom are you using?
xcutioner said:
Please help me....
after i flash basic kernel to nAa-08, i turn on my phone i have nAa-08 splash screen and i stuck in black screen not in sony ericsson...
please help me master in this forum...
Click to expand...
Click to collapse
Did you unlocked your bootloader? if not, it will not work. Were you able to go into CWM?
thanks all master
now black screen on my x8 solved but i have problem with network not detected or error....
please help master on this forum....
i got the same "no network problem..
lasttime i just sent to SE
but u can try to going back to stock and dont unlockbootloader
nAa-08b
am using nAa-08b i used nAa-08 but never had the wifi issues i have no problem with this using miniCm7 2.1.6, the only issues i have is that data does not work properly i have to enable/disable mobile data on some ocassions cause it wont load anything at all, but as far from that no problems hope this help and if you are not having this problem let me know thanks
xcutioner said:
Please help me....
after i flash basic kernel to nAa-08, i turn on my phone i have nAa-08 splash screen and i stuck in black screen not in sony ericsson...
please help me master in this forum...
Click to expand...
Click to collapse
did you follow the unlock bootloader guide properly?? if you did confirm that your x8 can be unlocked, just flash back to stock kernel and try again!
the black screen was cause you hadnt flashed any rom!
try it!!
and make sure you follow all instructions to the last letter!
I have also same problem.
My phone got bricked today after succesfully unlocking bootloader, and flashing latest nAa kernel in combo with gingerxperia v21. Phone just stuck on bootloop first time, and when i after hour or more on that, pulled battery off, and start on the phone again, it just stayed all time on logo of nAa kernel.
After that i flashed default kernel and default rom 2.1.1. and phone works flawlessly, but doesn't work in any combo of nAa kernel+rom, or with alfs kernel+other roms.
I can't see where is problem if unlocking bootloader goes succesfully, i got r instead of R letter when unlocking bootloader passes.
xcutioner said:
thanks all master
now black screen on my x8 solved but i have problem with network not detected or error....
please help master on this forum....
Click to expand...
Click to collapse
How did you fix it because I have the same problem.
and oresigat
xcutioner said:
Please help me....
after i flash basic kernel to nAa-08, i turn on my phone i have nAa-08 splash screen and i stuck in black screen not in sony ericsson...
please help me master in this forum...
Click to expand...
Click to collapse
maybe i use a nAa-14
I am extremely new to root n stuff, i successfully rooted using happy, doomlord binary and was preety happy . flashed few patchs and was happy.
Finally thought i flashing Pure X audio for xperia z and my mistake i saved DoomLord kernal on the same place. i mis selected Doomslord kernel instaed of PureXaudio ;( and finnally when i try hit reboot - it is not booting up
PLZ help !!! what do i need to do to get in to recovery tried power volume up and down , it vibrate but screen doesn't turn on or no progress ;(
Is flash or fast boot mode working properly?
Try to flash kernel again, or flash stock rom thru flashtool
doing it
Bairei said:
Is flash or fast boot mode working properly?
Try to flash kernel again, or flash stock rom thru flashtool
Click to expand...
Click to collapse
IT is not at all switching on , blank screen ;(
i tried to enter TWRP recovery , holding power on and tapping voume up - no go ;(
is there any other way to get in to revcovery ? i am preety new .. yes i am installing flashtool now and should i try tft ROM or can i flash by back up ?? i am not sure
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Trying it .. small query , pl help
gm007 said:
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Thanks a lot, i am doing it right now, downloading kernel
But my doubt is phone seem completely dead - when i hold power button it vibrates and red LED blinks, is this normal behavior ??.
no loader found for this device ;(
gm007 said:
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Now i am stuck at teh screen where it says 'no loader found for this device flashtool' can't go any further.
My bootloader is locked, should it be unlocked to get this done
please help !!
No you don't need to unlock the boot loader to flash via flash tool'you need the drivers
http://developer.sonymobile.com/services/flash-tool/
you will need to unlock if you want to flash a custom kernel ..
Try using Sony update service sus to repair your phone
http://www.sonymobile.com/gb/tools/update-service/
Sent from my Nexus 7 using Tapatalk 2
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
Please help If anybody has experienced
Thank you in advance
vodanhdaisu said:
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
Please help If anybody has experienced
Thank you in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2229250
Sent from my C6603 using xda premium
fish droid said:
Try using Sony update service sus to repair your phone
http://www.sonymobile.com/gb/tools/update-service/
Click to expand...
Click to collapse
You can't use SUS if you have already flashed your phone with a custom kernel, you can only use flashtool.
Just take a look to the link of gm007.
Xperia z bricked after doom Lord kernel! Help pls
QualQuek said:
You can't use SUS if you have already flashed your phone with a custom kernel, you can only use flashtool.
Just take a look to the link of gm007.
Click to expand...
Click to collapse
I am having the same problem. I have tried everything I know of including fastboot, flash mode, sus, pc companion, and so on. Still my phone won't even blink anymore. It doesn't seem to charge either. I don't know what to do. Someone please help! I was running creskole romantic and goo manager recommended the install of the doom Lord kernel v.18. Sadly, my phone never rebooted. Complete black screen.
Flash via flashtool bro.and dont use custom kernel ,use the stock kernel of doormlord one if ur locked bootloader.
Sent from my C6603
hOtsacE22 said:
Flash via flashtool bro.and dont use custom kernel ,use the stock kernel of doormlord one if ur locked bootloader.
Sent from my C6603
Click to expand...
Click to collapse
You can't flash unsigned kernels on locked bootloaders!! Just stock kernel.sin from identical FW!
Sent from my C6603 using XDA Premium 4 mobile app
PLEASE HELP i flash DooMKernel via cwm after reboot mobile not turn on push power button, the phone vibrates but does not awake
then i flash ftf via flashtool its turn on but again cant use any of the kenerl ..i have unlocked boot loader i tried to clean cash dalvik etc but always get soft bricked >PLEASE HELP
---------- Post added at 04:04 PM ---------- Previous post was at 03:06 PM ----------
Ronco87 said:
I am having the same problem. I have tried everything I know of including fastboot, flash mode, sus, pc companion, and so on. Still my phone won't even blink anymore. It doesn't seem to charge either. I don't know what to do. Someone please help! I was running creskole romantic and goo manager recommended the install of the doom Lord kernel v.18. Sadly, my phone never rebooted. Complete black screen.
Click to expand...
Click to collapse
same with me .........i try to flash it via cwm but after reboot mobile not turn on then i flash its original stock 2.67 kernel via flashtool my mobile turn on but wifi didnt works ..
then i flash
eXistenZ v4.3.5 ultra edition wifi now working but again : but cant install any of the kernels from doom kernel and others please help
my xperia Z cant turn on
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
will it boot if i flash once again the latest firmware
Please help If anybody has experienced
Thank you in advance
raveldom said:
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
will it boot if i flash once again the latest firmware
Please help If anybody has experienced
Thank you in advance
Click to expand...
Click to collapse
Is your bootloader unlocked? If not, you cannot run a custom kernel.
Flashing just the stock kernel for your firmware with Flashtool should fix your problem.
Sent from my C6603 using Tapatalk
kingvortex said:
Is your bootloader unlocked? If not, you cannot run a custom kernel.
Flashing just the stock kernel for your firmware with Flashtool should fix your problem.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
yes it is unlocked,i try to look everywhere on the internet and finally resolved d issues with d phone
problem!!
kernel not getting flashed through cwm and xperia z is rebooting again and again.what to do ?
salujapulkit said:
kernel not getting flashed through cwm and xperia z is rebooting again and again.what to do ?
Click to expand...
Click to collapse
Flash the img file from fastboot
Xperia Z not booting up after flashing
Hello guys, I badly need help in fixing my Xperia z c6603 device. I flashed the device using the ftf file from xperifirm and now my device does not boot up and stuck in blank screen.
Kindly assist.
hello guys I have such a problem with my xperia z1 actualize it with flashtool and now the phone is on but black screen with the screen by pressing the volume up sounds too but the screen shows nothing as if left on standby in advance appreciate thank you a lot your help
What were you doing in Flashtool before this happen? Were you trying to flash a firmware? Have you tried to flash the firmware again?
hush66 said:
What were you doing in Flashtool before this happen? Were you trying to flash a firmware? Have you tried to flash the firmware again?
Click to expand...
Click to collapse
if I wanted to upgrade but when I finish updating and stay shiny black screen when connected to the pc recognizes it normal I can make screenshots and view them on the pc thanks for replying I'm new to this
I have Xperia X8 with unlocked boot-loader using nAa kernel 14 gb and running android 2.3.7 jelly bread
I was trying to flash nAa jb 03 kernel via flashtool but for some reason the flash was aborted although I did the usual drill ... i tried flashing it back but no result it didnt work.
after that I tried to power up the phone and the led goes green and the phone vibrate and then nothing .... no light on the screen no boot animation just like that..... flashmode is still working i guess....
so I was searched here in xda for a solution and I found out that flashing back to stock kernel should help it via SEUS
so I just wanna make sure Im doing the right thing .... please give me any suggestion ..... its still early to say food bye to my lovely phone
Root97 said:
I have Xperia X8 with unlocked boot-loader using nAa kernel 14 gb and running android 2.3.7 jelly bread
I was trying to flash nAa jb 03 kernel via flashtool but for some reason the flash was aborted although I did the usual drill ... i tried flashing it back but no result it didnt work.
after that I tried to power up the phone and the led goes green and the phone vibrate and then nothing .... no light on the screen no boot animation just like that..... flashmode is still working i guess....
so I was searched here in xda for a solution and I found out that flashing back to stock kernel should help it via SEUS
so I just wanna make sure Im doing the right thing .... please give me any suggestion ..... its still early to say food bye to my lovely phone
Click to expand...
Click to collapse
just flash the stock firmware using flashtool
download it from my signature
BlackRabbit1703 said:
just flash the stock firmware using flashtool
download it from my signature
Click to expand...
Click to collapse
Thnx ^_^ its appreciated .... any idea about the cause of the problem ?