Database Develop

[Q] !!Urgent Help!! reflash to JM1 firmware

Since there are endless posts here describing how to flash ROMs, I'll humor you in a small way;
1 - samfirmware.com
2 - Sign up & download your firmware, and Odin 1.3, and PIT of that firmware
3 - Start your phone in Download mode (power off, then hold Home button, volume down button, and power button)
4 - Start Odin, load correct PDA file, click repartition, and load PIT file
5 - Plug in phone
6 - Hit "Start" once phone is recognized
Enjoy.

chill.. u got nothing to worry about.. read the thread below, follow the instructions 1 by 1 and you're fine it's jm9 firmware and it's the best among eclair and of course, can solve your problem
http://forum.xda-developers.com/showthread.php?t=802909

hey... thanks for taking out ur time and reply. i cant find firmware on that website... could you help plz..

NEW to ANDROID. need guide.

Hi there DEVELOPERS. I need a guide on root this DXJV9 thingy. I think mine is weird. the Baseband written: I9000DXJV9 , but then the Kernel : 2.6.35.7-I9000DXJVA-CL287936 [email protected] # 2. I thought both should be the same DXJV9? And the build number is GINGERBREAD.DXJVA. I'm first to ROOTING ANDROID phones. Someone please show me step by step to root this DXJV9 version. I search around google and saw that this DXJV9 thingy is the hardest among the others. I'm willing to pay for somebody that help me out. Just state your price. '' MULTIUPLOAD LINK CANT USE. REMOVED BECAUSE TERMS OF VIOLATION'' any other links? Thanks

please.. someone help please.

How to install JVU stock Firmware:
First, you need to flash the JVU stock firmware using odin. >>JVU Stock Firmware<< [Password: samfirmware.com]
After downloaded, extract the folder. The files included as followed:
CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5
GT-I9000-CSC-MULTI-OXAJVU.tar.md5
MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
s1_odin_20100512.pit
Odin3
Launch the Odin3.
Put all the files into the respective fields in Odin3.
PIT: s1_odin_20100512.pit
PDA: CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5
PHONE: MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
CSC: GT-I9000-CSC-MULTI-OXAJVU.tar.md5
Tick the Re-Partition
Reboot your phone into download mode (Press volume down + Home +Power Button). Yellow triangle will shown when reboot into download mode.
Connect your phone with PC via USB cable. Yellow ID:COM will shown if your device is detected.
After all the files are set, then click Start and your phone will be installed with JVU stock firmware.
After success, your phone will be reboot and JVU is installed. The setup wizard will shown up when as the phone rebooted, and make sure no boxes are tick. If the boxes are ticked as default, please un-tick it.
Proceed to the next step. How to install custom kernel.
Warning. Do not tick any box at first boot on set-up wizard!!! You can change the setting manually later. If the box is tick as default, please un-tick it.
How to install custom kernel?
Download the semaphore kernel.>>Semaphore Kernel<<
Assume the Odin3 is still open, click Reset to reset all the field.
Put the downloaded ZIP files at PDA section
PDA: Semaphore_kernel_JVU_2.5.0beta.tar
Make sure the Re-partition is un-ticked.
Reboot your phone into download mode (Press volume down + Home +Power Button). Yellow triangle will shown when reboot into download mode.
Connect your phone with PC via USB cable. Yellow ID:COM will shown if your device is detected.
After all the files is set, then click Start. It takes about 10 seconds and your phone will reboot.
Semaphore icon will be added in your phone menu. Go to setting and check the kernel version.
Now you are installed latest firmware and rooted!

Is it for dxjv9? the xxjvu thing can use on this baseband?
Sent from my GT-I9000 using XDA App

Thx chunli for help. I had success. Thanks alot

ChunLi said:
How to install JVU stock Firmware:
First, you need to flash the JVU stock firmware using odin. >>JVU Stock Firmware<< [Password: samfirmware.com]
After downloaded, extract the folder. The files included as followed:
CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5
GT-I9000-CSC-MULTI-OXAJVU.tar.md5
MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
s1_odin_20100512.pit
Odin3
Launch the Odin3.
Put all the files into the respective fields in Odin3.
PIT: s1_odin_20100512.pit
PDA: CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5
PHONE: MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
CSC: GT-I9000-CSC-MULTI-OXAJVU.tar.md5
Tick the Re-Partition
Reboot your phone into download mode (Press volume down + Home +Power Button). Yellow triangle will shown when reboot into download mode.
Connect your phone with PC via USB cable. Yellow ID:COM will shown if your device is detected.
After all the files are set, then click Start and your phone will be installed with JVU stock firmware.
After success, your phone will be reboot and JVU is installed. The setup wizard will shown up when as the phone rebooted, and make sure no boxes are tick. If the boxes are ticked as default, please un-tick it.
Proceed to the next step. How to install custom kernel.
Warning. Do not tick any box at first boot on set-up wizard!!! You can change the setting manually later. If the box is tick as default, please un-tick it.
How to install custom kernel?
Download the semaphore kernel.>>Semaphore Kernel<<
Assume the Odin3 is still open, click Reset to reset all the field.
Put the downloaded ZIP files at PDA section
PDA: Semaphore_kernel_JVU_2.5.0beta.tar
Make sure the Re-partition is un-ticked.
Reboot your phone into download mode (Press volume down + Home +Power Button). Yellow triangle will shown when reboot into download mode.
Connect your phone with PC via USB cable. Yellow ID:COM will shown if your device is detected.
After all the files is set, then click Start. It takes about 10 seconds and your phone will reboot.
Semaphore icon will be added in your phone menu. Go to setting and check the kernel version.
Now you are installed latest firmware and rooted!
Click to expand...
Click to collapse
The stock files didn't have the .pit files, just saying.
*EDIT*: How long does it take for it to set the pit file? It's stuck at do not turn off target...
I'll update once it works.

First, you need to flash the JVU stock firmware using odin. >>JVU Stock Firmware<< [Password: samfirmware.com]
Click to expand...
Click to collapse
Is there anywhere an md5 for this rar file? I'm not sure if my file was downloaded correct.

my ace is brick

please please i do what "ickyyy" said in this link http://forum.xda-developers.com/showthread.php?t=1552792 i install odin and i download the pda and everything went fine odin restart my phone but unfortunately it still bricked please if anybody can help me to find another firmware or anything that can help me pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

"Flashing s5830i with Odin v1.85
1.Turn off the phone and put it in Download mode by pressing Power+Volume Up+volume down.
2.Open Odin v1.84.Run as Administrator!.
3.Put the files in Odin and don't touch the settings
4.If it's a one-file firmware put it in PDA section.
If it's multiple put the files in the correct section.
5.Click start and don't touch the phone!Don't turn off computer and don't unplug the phone!It will reboot automatically and the first boot will take some time,so don't panic!..."
you can download any FIRMWARE for s5830i...

AmirChee said:
"Flashing s5830i with Odin v1.85
1.Turn off the phone and put it in Download mode by pressing Power+Volume Up+volume down.
2.Open Odin v1.84.Run as Administrator!.
3.Put the files in Odin and don't touch the settings
4.If it's a one-file firmware put it in PDA section.
If it's multiple put the files in the correct section.
5.Click start and don't touch the phone!Don't turn off computer and don't unplug the phone!It will reboot automatically and the first boot will take some time,so don't panic!..."
you can download any FIRMWARE for s5830i...
Click to expand...
Click to collapse
i m sorry but i do all that it reset my phone but nothing happened note i use odin v1.84 and pda that i got from the 4shared site for gt-s5830i i can i use another way pleaseeeeeeeeeee thank you in advance

harry dxvents
LINK for ODIN: http://forum.xda-developers.com/attachment.php?attachmentid=1054267&d=1336734690
It's that simple .. download firmware least you have the Android Development Section - Firmware - ... Extracts on the desktop .. there you have three files .. PDA. CSC. MODE ..
SAd quench the phone .. and pressing [POWERKEY] [VOLUME +] [VOLUME -] and keep it until you nowhere question whether you want to continue ... When she reaches the issue go [VOLUME +] ..
Odin and open it in the first section you will get .. PC ---- or otherwise .. rublike only will this be another color .. you know .. choose pda, modem, csc from that folder you're Extracts ..
example:
PDA: PDA_S5830i_XXLH2.tar
MODEM: MODEM_S5830i_XXLH2.tar
CSC: CSC_S5830i_OXXLH1.tar
No way THAT DO NOT infuse and go: PDA: CSC_S5830i_OXXLH1.tar. CES PHONE ... SO totally spoil ...
When filling the to .. you click START .. wait to be installed on your phone .. Do not unhook the phone while I was not restarted .. That's all .. : P Good luck

i hope your phone is not hard bricked............right??

farrukhafzal said:
i hope your phone is not hard bricked............right??
Click to expand...
Click to collapse
If his phone is "hard bricked" i have dubious about the JIG USB plugin unbrick his phone correctly perhaps i'm wrong but he can buy this JIG or make himself and try rescue his phone

this what osin says <OSM> All threads completed. (succeed 1 / failed 0)
than it restart my phone but nothing happened
note: i used cwm for ace 5830 which differs from my 5830i

farrukhafzal said:
i hope your phone is not hard bricked............right??
Click to expand...
Click to collapse
what does "hard bricked" means

thank you all {AmirChee,farrukhafzal and Alucard1989pl}finally i unbrick my ace after i download a new Firmware i think that the problem was that my problem the Firmware i have download before was not suitable to my phne yuppppppppppppppppppppppppppppppppppyyyyyyyyyyyyyyyyyyyyyyy:good:

:good::good::good:

[Q] Go back from Android 4 (i9001)

Please Help ..how to get back from android 4 "CyanogenMod 9 (CM9)" to android 2.3.6, have no idea what to do.

dannnnn said:
Please Help ..how to get back from android 4 "CyanogenMod 9 (CM9)" to android 2.3.6, have no idea what to do.
Click to expand...
Click to collapse
Hey,
So, I'll try make this easy and simple, hahaha.
1.) Download Odin and any stock 2.3.6 rom from sammobile.com. Unzip the file, you should get a single .tar file. Also download a file called dbsdata.rfs.tar
2.) Turn the phone off and put the phone into download mode using the three button combo- Vol. Down, Home and Power.
3.) Connect the phone using USB. Odin should recognise your device- it should say in one of the little boxes up top "COM:ID" with a yellow box.
4.) Select the PDA option. Navigate to where the first .tar file is, the one you downloaded from sammobile.com. Select it. DO NOT TOUCH ANYTHING ELSE AFTER. Once you've got that, select Start.
5.) Now you'll end up in a bootloop. Don't panic here- its because of how the data in 4.x and 2.3.6 are set up. This is where dbsdata.rfs.tar comes in. Pull the battery and reinsert it. Go back into download mode.
6.) Again under the PDA option, select dbsdata.rfs.tar. Let it flash in.
Done! You should boot back up properly into GB 2.3.6
Hope I helped
Sent from my GT-I9000

hi this is solution
1.search google with "i9001 official firmware" on your pc and download the zip(200-255mb) and extract with any known directory
2.download odin open,download ariesve.ops(u will get it by search on google
3.(connect phone in downloadmode )on odin inthe ops menu select the ariesve.ops file. on the left of odin select one package
4.at the bottom you will see select package click and select ur firmware which extracted in step1
5.now click on start
(!!!dont select the firmware on pda it will brick your phone!!!)
To enter download mode switch off the phone volume down+home+power button

[Q] Can't boot, can't access recovery

...can access download mode.
So,
I downloaded cyanogenmod 11, but I kept getting com.android.systemui has stopped EVERY 2-3 seconds. I couldn't do anything.
So, I downloaded stock rom, but phone won't boot (samsung logo, mini 2 logo, vibrating at samsung animation and repeat) and I couldn't access recovery mode.
I tried other roms and Recovery PDA
... well, stuck on fat.bin.
After that, it got...weirder. When trying to boot, I got samsung logo, mini 2 logo...but no animation. Instead, just vibrating. No loop. Just vibrating.
I'm aware I lost this mobile, but I can't buy new right now

so much replies here...so many ways to fix...thank you so much... :silly:

The same problem
JohnS_CZ said:
...can access download mode.
So,
I downloaded cyanogenmod 11, but I kept getting com.android.systemui has stopped EVERY 2-3 seconds. I couldn't do anything.
So, I downloaded stock rom, but phone won't boot (samsung logo, mini 2 logo, vibrating at samsung animation and repeat) and I couldn't access recovery mode.
I tried other roms and Recovery PDA
... well, stuck on fat.bin.
After that, it got...weirder. When trying to boot, I got samsung logo, mini 2 logo...but no animation. Instead, just vibrating. No loop. Just vibrating.
I'm aware I lost this mobile, but I can't buy new right now
Click to expand...
Click to collapse
I am hopeless in this issue to but....
I think that the last chance for us is a ROM which we can flash directly through odin.
It could work but I could not find any. Could any one have a rom to flash through odin?

install samsung driver and flash with odin3

you should flash your phone this is the
instructions
download odin3 https://www.copy.com/s/
qmTqyZFweDIj/Odin3_v3.09.zip
samsung driver for s6500
downloadcenter.samsung.com/content/
SW/201401/20140121132354500/
SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.33.0.exe
frimware for s6500
fileparadox.com/0bi6jri969ai/
S6500DBGMK1_S6500DXECML1_XEC_.zip
install samsung drivers and
Download firmware from the above list
and extract the zip file, you should get
.tar.md5 file along with few other files.
2. Download Odin v3.09 and extract the zip
file, you should get Odin v3.09.exe file
along with other files.
3. Now Open/Run Odin v3.09.exe file as an
administrator (to open program with
admin privilege, right click on the Odin
v3.09.exe file and click on the “Run as
administrator” from the context menu, this
is applicable only on Windows Vista,
Windows 7 or higher PC)
4. Switch off and boot Galaxy Mini 2 S6500
into Download Mode by pressing and
holding the Volume Down+Home+Power
buttons together (long press until the
boot screen appear). A warning message
will flash, now press Volume Up key to
proceed to Download Mode .
5. Now connect your Galaxy Mini 2 S6500 to
your PC via USB cable
6. In Odin screen, you should see a COM
Port number like “0:[COM7]” at ID:COM
section and “Added!” text at the message
box. This means your device has been
successfully detected by Odin. (If not, then
try connecting through another USB port.
If you are using desktop PC, use USB port
located at the back of the CPU. If still
don’t work, then you should reinstall the
USB driver and try again)
7. Make sure that, only the “Auto Reboot”
and “F. Reset Time” options are checked
in Odin screen.
8. Now, click on the AP button and select
the .tar.md5 file that you get by
extracting the firmware zip file in step 1.
9. Now, click on the Start button to begin
the installation process, and wait few
moments.
10. Once completed, you would see “PASS!”
message in ID:COM port having green
background
11. Your phone should automatically reboot
after completion
12. You can now disconnect/unplug your
phone from computer